Changes to objects are forbidden

Hi there,
Our functionals are trying to modify a program, but the system are returning the following message:
"Changes to object are forbidden by userId"
But, this program was brought from other landscape, so it was never modified in this landscape...
I looked for modifiable request, but it does not exists in the system.
Anybody knows how to unlock it?
Thanks in advance,
Dany Anderson

Hi Dany,
             Run the below sample code.
Give the program name as input and execute it.
This will allow you to edit the program.
REPORT  ZEDITOR                                 .
TABLES: TRDIR.
PARAMETERS: PROGRAM LIKE TRDIR-NAME OBLIGATORY.
PARAMETERS: EDITOR  LIKE TRDIR-EDTX.
SELECT SINGLE * FROM TRDIR WHERE NAME = PROGRAM.
TRDIR-EDTX = EDITOR.
MODIFY TRDIR.
IF SY-SUBRC EQ 0.
   WRITE: / 'Editor Lock update Successful ', TRDIR-NAME.
   IF TRDIR-EDTX = 'X'.
      WRITE: ' Lock'.
   ELSE.
      WRITE: ' UnLock'.
   ENDIF.
ELSE.
   WRITE: / 'Editor Lock update Unsuccessful ', TRDIR-NAME.
ENDIF.
Thanks & Regards....
Sudheer.
Edited by: sudheer chowdhary on Dec 10, 2008 6:37 PM
Edited by: sudheer chowdhary on Dec 10, 2008 6:39 PM
Edited by: sudheer chowdhary on Dec 10, 2008 6:39 PM
Edited by: sudheer chowdhary on Dec 10, 2008 6:40 PM

Similar Messages

  • Changes to program are forbidden by USER

    Good Morning Gurus.
    I have a program Z created by other guy.
    When i try Change this program then is showed the message:
    Changes to ZCX_FEBRABANT_REL are forbidden by ABA-FELIPE
    But This Guy ( ABA-FELIPE ) dont work in my company since 2008.
    How I can Change this program?
    The message says:
    Diagnosis
        You attempted to change ABAP/4 source code, but the author or last user
        has locked this against further changes by setting the editor lock.
    System Response
        You are not allowed to change the ABAP/4 source code, but can view it i
        display mode.
    Procedure
        You can change the ABAP/4 code only when the user who set the editor
        lock has canceled it.
    Thanks Gurus.

    Hi Ronaldo,
    various methods are there
    1.After getting proper approval from superior approach security team and do a password reset for the ABA-FELIPE user and login as an user and remove the editor lock in the attribute of the program.
    2.Use the below program
    TABLES: trdir. "System table TRDIR
    PARAMETERS: program LIKE trdir-name.
    PARAMETERS: lock    LIKE trdir-edtx.
    SELECT SINGLE * FROM trdir WHERE name = program.
    trdir-edtx = lock.
    MODIFY trdir.
    IF sy-subrc EQ 0.
      WRITE: / 'Editor Lock update Successful ', trdir-name.
      IF trdir-edtx = 'X'.
        WRITE: ' Lock'.
      ELSE.
        WRITE: ' UnLock'.
      ENDIF.
    ELSE.
      WRITE: / 'Editor Lock update Unsuccessful ', trdir-name.
    ENDIF.
    Execute this program with lock as SPACE (unchecked) to unlock
    LOCK with 'X'(check) to lock
    Regards,
    Kannan

  • Changes to LX50GU01 are forbidden by SAP* - note 943783

    Hi gurus,
    im installing baseline package for EhP 7 and I have problem with note 943783 implementation. During implementation, I receive this message: Changes to LX50GU01 are forbidden by SAP*. I tried logging into SAP* account, but from there I cant implement note, I tried unlock code in SE37, but I get only message Source text of an EXIT func cannot be chgd, I tried ABAP program to clear edit lock mark from note 71837, but is too old and its not working. What should I try next?
    Thanks in advance.
    Also I tried creating user SAP and editing by this user - still locked:/

    Hi,
    No need changing that inlcude to Z*
    normally we can change that include while copying from BAPI
    But i am not able do this particular server but im able to change that include in another server
    Regards,
    Azhar

  • Changes to LZUXX are forbidden by SAP*

    Hi,
    I copied the standard BAPI,
    when i trying to change the include LZTOP im able to change,
    but when i try to change the inlcude LZ***UXXX i am not able to do that i am getting a message "Changes to LZUXX are forbidden by SAP"*
    Any ideas to change that, what should i say to basis person
    Thanks & Regards,
    Azhar

    Hi,
    No need changing that inlcude to Z*
    normally we can change that include while copying from BAPI
    But i am not able do this particular server but im able to change that include in another server
    Regards,
    Azhar

  • Changes to ZXCO1U06 are forbidden by ABAP01

    kindly tell how to remove this error.

    The user 'ABAP01' should have 'set EDITOR LOCK' to the include ZXCO1U06. He has to remove editor lock in order to make changes by other users.
    EDITOR LOCK can be set/unset from the ATTRIBUTES of the program.
    The editor lock flag prevents other users from making changes to the program. This includes attributes, documentation and text elements, as well as the functions "Rename" and "Delete".
    Only the last person to change the program can remove the flag.

  • Custom change document object

    I want to trigger a new change object behind the standard tcode . In exit I need to call Y_DEBI_WRITE_DOCUMENT  to update my Y_DEBI custom change object . But when I am trying to update Generation prg on SCDO it asks a Table_frame func module ..
    Is the custom change document objects are designed for custom tables ?.
    Edited by: carlos eduardo on Aug 6, 2008 7:50 AM

    Yes Carlos,
    It is desined for Custom Tables.
    For more information you can look into the following link:
    http://www.sapdevelopment.co.uk/tips/changedoc/cdhome.htm
    Regards,
    Rizwana

  • Is it possible to make changes on object selection area???

    Hi friends,
    I wanna ask a question about portal.
    When we connect to portal we choose corporate documents , there are files of departmants like hr, it, corporate general ...
    We want some changes in object selection area of these files. For example when we get into object selection area of IT there are objects like favorites, others, personel documents, common document, common documents.
    My question is
    Can we deduct or hide some of these objects from object selection area? If we can, how can we do it?
    Thanks
    Muzaffer Öz
    Edited by: Muzaffer Oz on Dec 2, 2011 9:31 AM
    Edited by: Muzaffer Oz on Dec 2, 2011 9:44 AM

    Hi,
    We can hide those options by implementing the Layoutsets. If you need to hide those options for standard admin user itself, then you need to change the standard Layoutsets, which is not recommended. These options are defined in the "Command Group" of the Layoutsets.
    You can Navigate to Layoutsets thru below path.
    Sys Admin -> System Configuration -> Knowledge Management ->Content Management -> User Interface -> Settings -> Layoutset
    Tweaking over the Layoutset Command group properties will hide the options which you mentioned.
    Thanks,
    Mahendran B.

  • Objects are locked in open change requests during support packs update

    Hi All,
    We are applying support packs in the ECC Dev system. Its giving error in phase OBJECTS LOCKED..?  after that i checked with ABAP consultant he given requests which i unlocked the objects from SE03. Still the same error Objects are locked in open change requests is coming.
    If i checked requests which are not released, those are in hundreds which we can not release. How can i find a specific object which i need to unlock or any chance to skip the phase and continue. Because 15 days back i have updated the support packs without any of the issue.
    Please suggest me whether i can find the specific objects to unlock or any other process.
    Thanks & Regards,
    Sreekanth

    sreekanth jd wrote:
    Still the same error Objects are locked in open change requests is coming.
    >
    Hello,
    Normally when we double click on that error message 'objects are locked', system takes us to the transport requests containing those objects in question.
    And did you try SE03 --> Objects in Requests --> Search for Objects in Requests/Tasks ?
    Thanks

  • How to use change document object ?

    Friends,
    I am learning to use the Change Document object for one of my Z table. I have created a change doc object using SCDO. I have now written a test report in which i am issuing the SELECT statement for fetching old and new values from the Z table and passing them to the FM generated by SCDO.
    I am not able to see the changes in the CDHDR and CDPOS tables. I am doubtful abt the values being passed to the FM. Here are the values i am passing:
    CALL FUNCTION 'YTEST_WRITE_DOCUMENT'
      EXPORTING
        objectid                      = 'YTEST'
        tcode                         = 'se38'
        utime                         = sy-uzeit
        udate                         = sy-datum
        username                      = sy-uname
      PLANNED_CHANGE_NUMBER         = ' '
       OBJECT_CHANGE_INDICATOR        = 'U'
      PLANNED_OR_REAL_CHANGES       = ' '
      NO_CHANGE_POINTERS            = ' '
       UPD_ICDTXT_YTEST               = 'U'
        n_ztest_cle                   = wa_ztest_cle
        o_o_ztest_cle                 = o_ztest_cle
      UPD_ZTEST_CLE                 = ' '
      tables
        icdtxt_ytest                  = itab_cdtxt.
    Is the object ID the same as the Change Document Object name ??
    Please help.
    Thanks,
    Ram.

    Well, i found a way out for the problem i was facing. I was not setting the "UPD_ZTEST_CLE " FM parameter. When i set it to 'U', the changes got reflected in the CDHDR and CDPOS tables.
    Can i reward myself as i solved this by myself ???

  • System is not set to changable - objects are not changeable

    Hi Gurus,
    I am trying to open a query in the test system. while opening the query a error message is showing like: system is not set to changable - objects are not changeable.
    Kinly let me know how to solve this error.
    Due to this reason in my Plannin modler screen its showing that query is inconsistant,
    Regards
    Sajid khan
    Edited by: sajid.khan on Jun 22, 2010 9:35 AM

    Hi.
    In RSA1->Transport connection->ShftCtrl0 check whether you have any transport request connected.
    In addition ensure in "objects changebility" that you can change queries.
    Regards.

  • Duplicate Resource Objects  are displayed while provisioning the resource

    Duplicate Resource Objects are displayed while provisioning the resource to organization after creating a new workflow through export and import process.
    A workfolw already exists in the environment and I am trying to replicate the work flow with a different name . So i import all the components related to provisioning workflow rename the names of the components and make the necessary changes and import it back. after this I am getting Duplicate Resource Objects being displayed while provisioning the resource to organization .plz help.its urgent

    I have tried this process thrice not able to solve this problem ......unchecking allow multiple ..i don t think matters as this is provisioning to org ...n what i am telling is the list from which u select the resources to be provisioned --that list shows duplicate resource object names at a time..Each time I import an xml the number of same resource object names being displayed in the list increases ...So If I have imported three workflows then (say Resorce Object AD) appears thrice in the list. I have not given the resource objects same name in all the workflows for this to happen
    Sahana

  • Problem while generating Update progam for a Change Document Object

    Hi,
    I'm trying to deal with Change Document concept in a R/3 4.6C environment and to establish new Change Document object for my (Z)-table. I haven't using any namespace and created object with name ZTEST. Following the online documentation I came to the point, where I have to generate include program. I made all the nessesary inputs (using Z prefix) but faced
    "Function module name is reserved for SAP"
    Creating everything similarily using some of our registered namespaces (/somenamespace/) I succeed to generate the Update program and to integrate it in my Z-programs as well.
    My question is: is it possible to use Change Document Object-names without predefined namespace - being a regular customer developer, but not an SAP developer - means, if I am allowed to manage programs in the customer namespace (Z,Y, X) only. If yes, how to do this?
    Further (I decided not to open a new thread) - generated Update program uses
    CALL FUNCTION 'xxxxx' IN UPDATE TASK
    for creation of Change Numbers for generated Change Document Object. This CALL doesn't work when I implemented it in my Z-program, but when changed  (IN UPDATE TASK was commented) - everything goes well and the system creates records in CDHDR/CDPOS tables for my object class and table.
    Why is that? According to the documentation I shoud only fill appropriate variables for the Change Document Object (class, tr.code, etc.) and call generated FM, nothing is pointed out about any possible problems? Am I doing something wrong?
    Well, to be precise, I think I have to give a sample:
    1. I have a sample Z-table with few fields (their data elements are marked as Change-Document relevant).
    2. Using own z-progam I created a new record for this z-table. Also fill all the nessesary variables included in the interface of generated FM for Change Document Object (for example - FM-mane CD_CALL_my_object).
    3. I call the CDO FM.
    4. Check what is happening (directly in both tables CDHDR/CDPOS or using FM CHANGEDOCUMENT_READ).
    Further, I perfom the steps from 1 to 4 updating the created in previous loop record in my Z-table.
    In both cases if the FM 'CD_CALL_my_object' is called IN UPDATE TASK nothing happens, but in case of direct call (without addition IN UPDATE TASK) the system behaves as expected. Well, obliously I can change the generated code for our production needs, but it doesn't seems to be the correct decision - in case of next possible modification of the Change Document Object definition, respectively in need of re-generation of the code.
    Any hints are wellcome.
    Thanks in advance.
    Ivaylo Mutafchiev
    Edited by: Ivaylo Mutafchiev on Jan 24, 2008 10:24 AM

    "IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
    Regards,
    Ivo

  • Problem in multiple item for change document objects

    hi gurus,
    I have created change document object in tcode SCDO . It had giveN function module /TMW/CHG_OBJ1_WRITE_DOCUMENT.
    CDPOS AND CDHDR tables are updated with changed data. now i am trying to display all old and new data in se38 program.
    here my problem is when ever i changed multiple  item data , my program showing first item details only . I need to show all item data when ever i changed parallel . please help me where is my problem .
    thank you

    I think this is issue with function module generated thru SCDO Please check in your function module inside that the following function modules are used
    CALL FUNCTION 'CHANGEDOCUMENT_OPEN'
    CALL FUNCTION 'CHANGEDOCUMENT_MULTIPLE_CASE'
    CALL FUNCTION 'CHANGEDOCUMENT_CLOSE'
    if not then there may be issue with SCDO
    a®

  • Routings: mass change of object dependency

    Hi Friends,
    Do you know if there is way to apply a mass change on object dependency in Routings?
    My scenario is: add one new obj dependency at one operation on several (hundreds) routings.
    Thanks a lot for any help or suggestion.
    Bye,
    Flavio Ciotola

    Dear,
    BDC is good option you can record the BDC for CA02 through SHDB.
    Or else in mass you can do this wth CEWB - Engineering Workbench  first define the  Working Area in OP77 lets say Working Area    SAP_OPERATION select focus on operation also select the required field like Object dependency.
    and then go ahead with CEWB.
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Change Document Object ICDTXT_ include name

    Hi fellow developers.
    What is the purpose of each field in ICDTXT_<include name> when preparing to call the function F<include name>_WRITE_DOCUMENT? For example, I have an IT called ICDTXT_ZCD_CONFIG_CV and this is how I am filling the fields:
       UPD_ICDTXT_ZCD_CONFIG_CV = UPD_Z00_CONFIG_CV.
       wa_log_info-teilobjid = 'Producto'.
       wa_log_info-textart = ' '.
       wa_log_info-textspr = sy-langu.
       wa_log_info-updkz = UPD_Z00_CONFIG_CV.
       append wa_log_info to ICDTXT_ZCD_CONFIG_CV.
    I am not sure at all what to set in textart. And teilobjid is the table key as far as I know. But I want to be sure I am doing this correctly.
    Thank you for your time.

    Yes you must call the FM via the generated include in your update program, change document are programmatically managed. in the "SAVE" form use some CALL FUNCTION IN UPDATE TASK to call the FM that updates database and the FM that creates change documents - look at [Update Techniques|http://help.sap.com/saphelp_nw04/helpdata/en/41/7af4cba79e11d1950f0000e82de14a/frameset.htm] and [BC414|http://www.sap.com/services/education]
    - without programming you can fill DBTABLOG via SE11 options
    - Also look at [Defining Change Document Objects|http://help.sap.com/SAPHELP_nwmobile71/helpdata/EN/2a/fa018f493111d182b70000e829fbfe/frameset.htm] and [Integrating the functionality into the program|http://help.sap.com/SAPHELP_nwmobile71/helpdata/EN/2a/fa01b6493111d182b70000e829fbfe/frameset.htm]
    Regards,
    Raymond

Maybe you are looking for