Is it possible to make changes on object selection area???

Hi friends,
I wanna ask a question about portal.
When we connect to portal we choose corporate documents , there are files of departmants like hr, it, corporate general ...
We want some changes in object selection area of these files. For example when we get into object selection area of IT there are objects like favorites, others, personel documents, common document, common documents.
My question is
Can we deduct or hide some of these objects from object selection area? If we can, how can we do it?
Thanks
Muzaffer Öz
Edited by: Muzaffer Oz on Dec 2, 2011 9:31 AM
Edited by: Muzaffer Oz on Dec 2, 2011 9:44 AM

Hi,
We can hide those options by implementing the Layoutsets. If you need to hide those options for standard admin user itself, then you need to change the standard Layoutsets, which is not recommended. These options are defined in the "Command Group" of the Layoutsets.
You can Navigate to Layoutsets thru below path.
Sys Admin -> System Configuration -> Knowledge Management ->Content Management -> User Interface -> Settings -> Layoutset
Tweaking over the Layoutset Command group properties will hide the options which you mentioned.
Thanks,
Mahendran B.

Similar Messages

How to make changes on the selection screen of a logic database?

I want to make one of the select-options of logic database PNP no-interval no-extension, what should I do? Is there any links for manipulating LDB? thx~

Hi,
This blog on SDN will help you on this.
[Re: Change selection screen in LDB (KDF logical database - NOT HR);
Regards
Abhii....

I use mymsn page and when upgrading to Firefox 4 the changes went away and I can not make changes to the stocks area or see my emails. How do I fix that?

Mymsn has areas that allow you to list your stocks and also an area that allows you to see what emails you have waiting to be read. Both of these areas went away when I upgraded to Firefox 4 last week. When clicking on the menu area to make changes, nothing happens. How do I get back the information that was in these areas? Also the customize button does not work.

Do you have Adblock Plus installed? If you do, disable on the page where you normally see your stock info. I've uploaded an image of what happens on another site where ABP is enabled. The Global News image disappears with ABP enabled even though it's not an ad.
If that doesn't work, try running Firefox in [[Safe Mode]]. If it works correctly in that configuration, then one of your add-ons is the culprit.

Is it possible to treat a mpeg movie (selected area intensity profiles) with imaq ?

From a mpeg movie file (recorded with a digital camera in grayscale colors), I want to create some windows fixed in a selected area (always the same during all the treatment). Then, from this window, integrate all the grayscale level data for each image and thus get a plot represented the integrated intensity versus the time. Is it possible to make that kind of specific application using IMAQ ? Note, that my movie file resolution will be 800 000 pixels, and a rate of images from 50 down to 5 images per second.

I just updated IVision to version 1.3. It adds the support for media file formats such as *.mpeg, *.asf, *.avi (different from my existing avi functions that these new ones supports almost all avi compression format unlike VFW based avi functions). I also added capabilities to make LV vi to be callback vi so that real time video processing can be done better. So you can use IMAQ vision or my toolkit to code your image processing vi like you mentioned fixed ROI and calculates the intensity of it and display this in a graph updated with time while video streaming. Check out my site at:
http://www.geocities.com/irene_he/IVision.html
there is a similar demo to show this.
Irene

Is it possible to make clipping masks only selectable within their objects?

I sometimes work with files which have multiple objects which contain enormous clipping masks. This means whenever I go to drag-select multiple objects on a board it will always select multiple clipping masks, and essentially render this mode of selection useless.
Is there any way to ensure that clipping masks are only ever selected within the bounds of their containing object?
Thanks,
Felix

Sure.
So I'll have a page full of pushpoints, with clipping masks applied to each to provide a photographic backdrop:
But then if I try and select the adjacent pushpoint elements, it will also select the clipping masks, despite the fact that it doesn't actually touch its containing object.
This has lead to quite a bit of inconvenience in many circumstances. Any idea, apart from locking the layers? I need the clipping masks to also be selected when their container layer is selected, but not the rest.
Thanks in advance!

Problem while generating Update progam for a Change Document Object

Hi,
I'm trying to deal with Change Document concept in a R/3 4.6C environment and to establish new Change Document object for my (Z)-table. I haven't using any namespace and created object with name ZTEST. Following the online documentation I came to the point, where I have to generate include program. I made all the nessesary inputs (using Z prefix) but faced
"Function module name is reserved for SAP"
Creating everything similarily using some of our registered namespaces (/somenamespace/) I succeed to generate the Update program and to integrate it in my Z-programs as well.
My question is: is it possible to use Change Document Object-names without predefined namespace - being a regular customer developer, but not an SAP developer - means, if I am allowed to manage programs in the customer namespace (Z,Y, X) only. If yes, how to do this?
Further (I decided not to open a new thread) - generated Update program uses
CALL FUNCTION 'xxxxx' IN UPDATE TASK
for creation of Change Numbers for generated Change Document Object. This CALL doesn't work when I implemented it in my Z-program, but when changed (IN UPDATE TASK was commented) - everything goes well and the system creates records in CDHDR/CDPOS tables for my object class and table.
Why is that? According to the documentation I shoud only fill appropriate variables for the Change Document Object (class, tr.code, etc.) and call generated FM, nothing is pointed out about any possible problems? Am I doing something wrong?
Well, to be precise, I think I have to give a sample:
1. I have a sample Z-table with few fields (their data elements are marked as Change-Document relevant).
2. Using own z-progam I created a new record for this z-table. Also fill all the nessesary variables included in the interface of generated FM for Change Document Object (for example - FM-mane CD_CALL_my_object).
3. I call the CDO FM.
4. Check what is happening (directly in both tables CDHDR/CDPOS or using FM CHANGEDOCUMENT_READ).
Further, I perfom the steps from 1 to 4 updating the created in previous loop record in my Z-table.
In both cases if the FM 'CD_CALL_my_object' is called IN UPDATE TASK nothing happens, but in case of direct call (without addition IN UPDATE TASK) the system behaves as expected. Well, obliously I can change the generated code for our production needs, but it doesn't seems to be the correct decision - in case of next possible modification of the Change Document Object definition, respectively in need of re-generation of the code.
Any hints are wellcome.
Thanks in advance.
Ivaylo Mutafchiev
Edited by: Ivaylo Mutafchiev on Jan 24, 2008 10:24 AM

"IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
Regards,
Ivo

Itunes is not able to make changes to a running title, problem is new since feb 10th

I'm located in Germany, sorry for some english mistakes. Hope to get the problem clear ;-) My itunes library is located on a NAS-storage. Made the firmware Update for Airport Extreme a few days ago. . SInce that time it's not possible to make changes in the Information of a running title in itunes. To get the problem clear i like to explain: got about 100thousand titles in itunes, use it for many years, always the same workflow: I listen to a new title and make changes to the title-information such as intensity, genre, cover-editing, composers, comments, etc. No problem, it was always stored to the file. Now it is possible to do this changes, but the next time, you play this title, information is automatically setting back to the original infornation. If I do this to a NOT running title, the information is to be fixed properly. I use my library for professional work, so this is not acceptable, because it's taking far too much time in the progress. Maybe it's a network problem, not an itunes problem. But maybe someone else got the same experience.
How i loved itunes 10....
Hey folks, if maybe anyone at apple should read this (I'm shure they won't), itunes 11 is the worst software that was ever released by apple. Sorry to say that! I never thought of switching back to PC, but now I'm looking for a better solution.
AND WHY HAVE YOU KILLED THE COVER-DISPLAY IN THE SIDEBAR........ It's nothing to understand...
fairytale gone bad!!!!

Hello
I have change the table GB01 for the fields BSEG-ZFBDT and BSEG-REBZG clearing the flag BEXCLUDE.
I run the programm RGUGBR00 with all flags, after it I can't change a document (field BSEG-ZLSPR) with 'mass change' in transaction FBL5N and in batch-input for transactions FB02 and FB09.
Could Help me?
Regards
Daniel Teles

Object Crop Area Make / Release

Hi all.
I was using Illustrator CS3.
I need to make a rectangle fitted exactly to artboard.
I was using Object > Crop Area > Make, and then Object > Crop Area > Release
Now I am on Illustrator CS6 and this options are missing.
How can I do the same on CS6?
Best Regards.

OK.
I respond to myself.
I find this javascript, that does exactly what I need.
#target Illustrator
// script.name = fitObjectToArtboardBounds.jsx;
// script.description = resizes selected object to fit exactly to Active Artboard Bounds;
// script.required = select ONE object before running; CS4 & CS5 Only.
// script.parent = carlos canto // 01/25/12;
// script.elegant = false;
var idoc = app.activeDocument;
selec = idoc.selection;
if (selec.length==1)
                    // get document bounds
                    var docw = idoc.width;
                    var doch = idoc.height;
                    var activeAB = idoc.artboards[idoc.artboards.getActiveArtboardIndex()]; // get active AB
                    docLeft = activeAB.artboardRect[0];
                    docTop = activeAB.artboardRect[1];
                    // get selection bounds
                    var sel = idoc.selection[0];
                    var selVB = sel.visibleBounds;
                    var selVw = selVB[2]-selVB[0];
                    var selVh = selVB[1]-selVB[3];
                    var selGB = sel.geometricBounds;
                    var selGw = selGB[2]-selGB[0];
                    var selGh = selGB[1]-selGB[3];
                    // get the difference between Visible & Geometric Bounds
                    var deltaX = selVw-selGw;
                    var deltaY = selVh-selGh;
                    sel.width = docw-deltaX; // width is Geometric width, so we need to make it smaller...to accomodate the visible portion.
                    sel.height = doch-deltaY;
                    sel.top = docTop; // Top is actually Visible top
                    sel.left = docLeft; // dito for Left
else
                    alert("select ONE object before running");
Thank for you help.
Best regards.

How to make slicer to remember selected values while moving from report to another

I have Power View on SharePoint 2013 and OLAP Cube on SQL Server 2014 solution.
1) I select slicer values and graphs are updated
2) I move to next page on same Power View file and use slicers.
3) I come back to original reports. My slicer valuers are empty.
Is it possible to make slicer to remember selected values while browsing from reports to another?
Ken
Kenny_I

Hi Kenny_I,
This seems to a by design issue. The selected values within a slicer will be stored in Memory. When we go to another report, the memory will be released.
Best Regards,
Black

CS5 turn off object selection "target"?

Does anyone know if it's possible to toggle off the object selection target (the thing that looks like a focus ring from an older film lens) that appears as a default within the image box? I can't tell you the number of times I've meant to move an entire image box and accidentally shifted the image within the bounding box instead. It's a-makin me craaazy!

Nobody needs it - I'm clueless to why it was ever introduced?
I turned it off too - but I have to admit I would use it if the target was smaller. With the content grabber on there is too much chance of accidently moving an image within the frame.

Is it possible to make a reflection of an image that will change with the image? [was: Reflection]

Is it possible to make a reflection of an image that will change with the image?

normfb wrote:
I believe that a Smart Object will solve your problem.
place your original image in a new file as a smart object and do the same for the reflection (made by Transforming, reducing the opacity and introducing a mild horizontal motion blur) on its own layer, then:
by double clicking on the smart object in the layers panel and returning to the original image, any change you make in the original and save, will automatically update the upright image and its reflection.
Nice one Norm. Five Kudos points to you.

Action that makes change to visible properties possible?

Is there a JavaScript way (or another) that makes it possible to change properties of an object.
F.e A buttonClick that changes the fillColor of the shape of the target (= clicked button)

Nice to hear that!.
I'm working with Captivate 8, but can't find the way to that action (was
first trying with JavaScript...)
btw : I'm working at the Odisee UC (fusion between KAHO and HUB /EHSAL).
Bart D'haenens told me about your expertise Do you offer also training &
support?
2015-01-13 11:51 GMT+01:00 Lilybiri <[email protected]>:
action that makes change to visible properties possible? created by
Lilybiri <https://forums.adobe.com/people/Lilybiri> in Adobe Captivate
- View the full discussion
<https://forums.adobe.com/message/7090729#7090729>

Very new to photoshop I am trying to make changes to a photo and set it up as a smart object but after selecting smart object, the checkerboard appears and my photo dissppears

Very new to photoshop I am trying to make changes to a photo and set it up as a smart object but after selecting smart object, the checkerboard appears and my photo dissppears

Hello, thank you so much for your response! Here are some screenshots of my steps taken

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Is it possible to make a cell change colour of a period of time with rules?

Is it possible to make a cell change colour of a period of time? for example
Date
Company
Pick Up
Destination
Total
Paid
Sat, 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
FALSE
Is it possible for B7 to change colour if 2 weeks have passed from the date in B1 and Paid is still FALSE and green if it's TRUE?
Many thanks.

Hi NeoNapster,
This may be a start. Conditional Highlighting of a cell that depends upon the values in other cells can be tricky, but we can work on that.
Date
Company
Pick Up
Destination
Total
Weeks
Paid?
OK?
Sat 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
29.0
FALSE
Overdue by 29.0 weeks
Sat 4 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.0
TRUE
OK
Wed 1 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.4
FALSE
Overdue by 3.4 weeks
Wed 8 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
2.4
FALSE
Overdue by 2.4 weeks
Mon 20 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.7
FALSE
OK
Sat 25 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.0
FALSE
OK
Table with one Header Row
Formula in F2 (Weeks) and Fill Down
=DUR2WEEKS(TODAY()−A2)
That shows the Duration in weeks from the Date in column A until TODAY. You can hide this column.
Column G can contain the text TRUE or FALSE or could be checkboxes.
Formula in H2 and Fill Down
=IF(G2,"OK",IF(F2>2,"Overdue by "&F2&" weeks","OK"))
IF a cell in G is TRUE, then insert "OK". No need for any more checking.
Else IF a cell in F is greater than 2, then insert "Overdue by" and the number of weeks
Else insert "OK" (the invoice is less than 2 weeks old).
Conditional Highlighting of the Body Cells in column H. Select the cells.
Add a Rule...
text is
OK
Green Fill
Add a Rule...
text is not
OK
Red Fill.
Column H with the Conditional Highlighting rules:
OK?
Overdue by 29.0 weeks
OK
Overdue by 3.4 weeks
Overdue by 2.4 weeks
OK
OK
(And I have just discovered that colours do paste into this forum ).
Regards,
Ian.

Is it possible to make changes on object selection area???

Similar Messages

Maybe you are looking for