Changing access specifier from public to private has no effect at runtime

The scenario is like this.
I have two classes A and B and from B i am calling some public methods on A. Until now everything is okay. Now i am changing the access from public to private for the methods in A and recompile it (i'm compiling only A).
The point is, I am not making any change to B, which is still referring to the methods in A, whic are now private .
What will happen if now i try to invoke the above methods on A through B ?? Class A should not allow that, since it is private now. But I am able to access those methods from B!!!
Any idea why it is occurring?????
Now if I try to compile B(note that i didn't compile it earlier along with A), it will throw a error saying that B is trying to access methods which have private access in A, which is right...

Nowadays (April 2004) this is still the case, I ran into this behavior today and had a long discussion on it on some java irc channel, but nobody really seemed to know what is exactly going on.
My questions: This access-checking seems to occur only at compile time. Is there a document or whatever notice from sun describing this? Is performance the only reason to do such a thing?

Similar Messages

  • Server 2012 R2 - Change network location from public to private

    I am having an issue with changing Network location to private from Public on Server 2012 R2 X64 .
    Please note all the reference for previous servers for fixing this issue  does not work on 2012 R2.
    I am using Static-IP and "Workgroup" as domain setting.
    In 2012 server by Right  clicking on Network and Turn sharing on or OFF worked but in 2012- R2 Right click is not working not providing turn sharing ON or OFF option.

    Check if you can change from here :
    Run -- Gpedit.msc-- Open Computer configration -->Windows Settings -->Security Settings -->select Network list manager policies
    Arnav Sharma |
    Facebook | Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other
    community members reading the thread.
    NO it did not work I had already tired and rebooted it does not work. Just for other having the same issue please note my Build is 9600 so this may not apply to you,if you have a different Build you might not have this problem.
    I am going back to server2012 rather using R2.

  • Remote content bar does not appear for some emails with images specifically daily Twitter updates. Changing options to allow all remote content has no effect

    The broken image symbol appears in place of the images but associated web links do work ok.
    Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
    Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
    Any help appreciated.

    You only need to post a URL to your web site. We can see your code in Browser.
    So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
    You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Changing oracle DB link from Public to Private

    Dear All,
    I would like to know what will be the impact of chaning a PUBLIC db link to PRIVATE db link.
    following is the scenario.
    In our Prod distributed environment, there are many Databases which need to talk to each other for which we have create PUBLIC db links.
    Similar PUBLIC DB links are also created in our DEV/ST/SIT/UAT environment...
    Now we would like to know;
    1. What will be impact (especially negative) if those DB link are converted to PRIVATE.
    2. What are the disadvantages aer this PUBLIC to PRIVATE conversion...code espacially application users, code execution etc.
    3. What are the considerations / steps to be taken to avoid any issues due to this PUBLIC to PRIVATE conversion.
    Thanks and Regards
    Santy.

    What is he reason you want to do this?
    1. What will be impact (especially negative) if those DB link are converted to PRIVATE. Public link is accessible to every user in the database and Private db link ca be used by only the owner of the db link. This could potentially break the workflow.
    2. What are the disadvantages aer this PUBLIC to PRIVATE conversion...code espacially application users, code execution etc. Depends. Public are generally considered more unsecure. Only disadvantage I can see is that you have to fully study your environment before doing it. You have to check all the users who are using that public database link and create private one for all of them.
    3. What are the considerations / steps to be taken to avoid any issues due to this PUBLIC to PRIVATE conversion.See 2

  • Cannot change active network from public to home in Windows 7

    Hello,  I have just installed Windows 7 RC 7100.  I have a netgear fa311 network card, which it did not automatically install.  I manually installed the drivbers and now it has identified my home network as a "Public network" so I can not connect to the internet.  I can't seem to find any way to change this to the "Home network".  Can anyone help please?

    Hello,  Tried that! The"Public network" text is not a link!!  Not here on this pc anyway!  The ip address I have is 169.254.172.117 with a subnet mask of 255.255.0.0
    May 25 2012  23:03  win7Ultimate update from HomeP LicenseID_5_ sys pack1
    May 26 2012  10:18 ~ 10:28  win7U5 sp1
    May 26 2012  11:21 ~ 11:29  win7U5 sp1
    May 28 2012  04:10 ~ 04:43 Win7U5 sp1
    July 3rd  2012  08:13 ~ 08:36 win7U3 sp1
    July 05th 2012  16:24 ~ 16:33 win7U3 sp1
    July 06th 2012  12:43 ~ 12:53win7u3sp1
    July 07th 2012 13:29 ~ 14:00 win7u3 sp1
    July 22 2012  ~ 09:04 win 7 p  h  sp1
    Aug. 06 2012  10:33~10:48 win7h sp1
    Aug. 25 2012  08:12~ 08:53 win7U_6 sp1
    Hello  Mr. Darene Lewis and Ellerdch,
    Remember you have emailed the *.etl file to Darene Lewis .  May I know how you did that from here , the technet.microsoft forum please?  I have been asked same IPV4 Question from him. However, there is not found attach way from this perusal.
    They are either image , HTML or appliance software model.
    No option for *.etl sending .  
    --------> *.elt could be built in Hyperlink first then attach_link to you [July 07 2012 13:30]
    TO modify the Networks , some next places maybe need pay attentions first ...
    0) Connection via WLAN or LAN; Router or Modern or else
         '0.1)  "MULTIPLE NETWORKS" means too many things ... router, interface, communication category as well their configurations so on ...
                   it is not simple "unidentified Network " change to Home or workstation network ? !
    1) Network Share Center \ chose home and network option
    2) Anti_Virus FireWall's Inbound:Outbound settings
    3) Microsoft Computer \ services settings
    4) Dos Administrator \ netsh ? settings
          4.1)  Powershell \ settings << Dos cmd , why?
          4.2) netsh ras > except PPPoE 1  that is my registered wanport, there are as many as 8 more connection available like pptp,  etc... they are indeed
                 running ? Although in Router configuration , PPTP already has been set to "deny" ?
    5) Search \ secpol.msc settings
    6->) Why the default network ISP giving connection retained reserving at MULTIPLE        
           NETWORK     which is under the search now.
           May 26 2012  10:48 win7U sp1
           May 26 2012  11:09~11:14 win 7 U sp1
           Multi_monitor performance on Win 8 only , if my PC has been taken Authority to do so, then
           the System Security has been ruded.
           PASSWORD attentions included : ANTI_virus Tool, Microsoft Fire Wall, HDD password, 
           Windows  logon Password, Usual Appliances Password Protection such as Lenovo's CSS etc...
          Ref: cc722518.aspx_file by Microsoft
          This article described how a server configure its up to five IPs from the NT Server. 
          My PC client has been merged by NT as its Client . Since my PC now connecting internet      
          THROUGH Multiple Network.
          It is either using my ISP authority on Win 8 for multi_monitor or playing NT server . It just  
          treat     me as one of its clients.
         How can I fix this , try hard Julie by yourself?
         "Advance IP Address nowhere to find [as it is for Server parameter], this is for NT server to      
          configure the IP intranet more than one address to access different servers at routine  situations.
         Ref:cc451515(v=WS.10).aspx_files Microsoft
         Multiple network adapters  2 out of 2 rated this helpful Updated: January 21, 2005
         Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1,  
                           Windows Server 2003 with SP2
        quato   "The cluster adapter handles client-to-cluster traffic using the virtual IP address. However
        host-to-    host traffic within the same cluster is not
        possible on this adapter because the MAC address for each host in a particular cluster is the   
        same. For more information, see Address Resolution
        Protocol (ARP)."
        FIFS is the basic law here in the INTERNET world.
        Since the IPV6 has not be able to work to identify each of us except Client join to Domain own   
        personal IP from NIC.
        Some Domain like Best domain, FatCow simple issue C Luster called it to us.
        That is why My client PCs has been unnoticed connected as Multiple Network by Servers.
        ----> very likely Modern ISP output has been occupied by Wireless redirect who roler as Server ,
                 maybe using win 8 or NT  . Many prompted cmd not be able to configuration on my Win 7 U.
                 netsh advfirewall> check found 7 NL there.
    7) The Authority abuse accident under monitoring by Anti_Virus and Microsoft, Lenovo,     
        Router_syslink Companies  REF_15)  16)
    8) Power shell another place to care the setting
    9) Route Setting for advance appliance on Intrude Protection approaches etc...
    11) AAA [Authentication, Authority, Account] management, correlated with Multiple Network
         somehow,Reference for 6)   15)  16)
          Authentication has had problem to protect Password for a quite while. Which is probably merged
          with MIL appliance that noticed.
              ------> CSS reset can solve this.
             ------>E-certification with Microsoft function connection setting solve this ..
          With Password manager of Lenovo , it will lose features of Certification migration as well,  the
          Phrase advance Security Protection THAN  "Client Security Solution" by Lenovo
          Therefore, CSS (instead Password Manager) can be intruded at that time probably by " some "
    12) The beneath Error contacting ISP still stay with Modern VSDL  :(   REF_ 15) 16)
    13) Having been questioned whether  am I installing switch  or NT server on the router ... 
          Three are be some symptom indicated that but unable to be ? Agency said just ask briefly after
          repeated .
          13-0) [802.1x allow wire and AP wireless  access point to flow through PC although
                   Authenticator both]
          13_1)MY XP motherboard  [UUID:80BC1E5333640010AEC1C8D08A1DEE15/M:8425LB9/SN:]
                   has been lost nearly two years which can play as NT server. Switch is  nothing device
                   for   me .   ANY detective on it by organization or personal would be rewarded.
    14) ACS [Authentication Control Server] control Modern ISP output signal definitively , the Contract 
          description on web server Plan is one of main reasons? THE ISP insist not to change it right while 
          trail_case follower Mr. resigned this week.  
    15) ISP suppliant Speed critical factor upon whose get Authentication first then , the ICMP action ?
           15-1) Why my ISP plan 30M , shown connection speed but100M
           15-2) In fact, the ISP has not rendered me right Order Product appropriated with the PLAN for
                    over one year from very beginning. That is one of why ACS can't detect me well. On side of both contract and exclusively
                    offering VDSL modern
           15-3) e-certification secure the connection however, clear text transaction hole also.
    16)   With Cisco Router, it seemingly connected Internet as the Model unable find input is
            Wire/Wireless signal. Having to proclaim is my PLAN is
    Wire_30M_5G  ordered at Mar.2011
            16-0) There is fe::  ipv6 address likely address through the [adapter teredo pseudo interface] by ipconfig  , obviously told me wireless through ?
            16-1) By only ISP Modern ,   there is indeed NO Internet that is why the Screenshot down.
                     Then why at this condition, browser internet looks OK? Because the Wireless [multiple
                     Local connection] Ref_15  took the Authentication_Account first, secondly, Created
                     call  AD_HOC wireless function to make the all networking devices on net that is
                     INTRANET. 
            16-2) @OFCA.gov.hk, local communication Management ,   is negotiating with ISP locally for one week since June 27 2012 received
                     the report.   Only contract it working on , last contact at Aug. 2nd 2012   retaining along with ISP company today Aug. 25 2012
    17) Have you thought of PC purchase area and location bringing you something differences ?
          17.1    the order win7 home premium changed into workstation when it arrived home. :(
                     well, have to pay attentions that the WORKSTATION has two interface available on the NetworkCard that one to Internet and another to
                     OS. How it can be set to , route to then,  it will all depend on the capability inter_against_act  among the Hardware, Software and Firewall 
                      etc. so on .
    18) ISP  adequately protracting your account, example,   all register info correct,  firewall right configuration time by time?
    19) Microsoft alert anything when you re_active own PC license  ?
    20)
    All you pointing out Services and Applications on the Media related no found . Might be hidden?
    The problem "Multiple Network" is an Intrusion NetworkCard  imposing
    illegally using my account. A 30M_WIRE_24m+1m  e-agreement.
    Then, the imposter  built a wireless network before I could connect to the ISP server.
    This made me only can get a Wireless address shown by the IPV6 FE80::
    which implying a wireless service working on.
    DNS  auto jump to >172.x.x.x private 218.x.x.x  while disabled the directly connection to ISP DHCP server.
    Suffix @netvigator.com appending  configuration not available.  Obviously my PC has been routed to one Private
    Route/Switch device, the Unknown shown in Mapping Network for over four months.
    NOW THE UNKNOWN DEVICE DO ANYTHING WHAT THEY WANT WHENEVER SECOND. 
    ISP has no effective and efficiency reaction for it .  Since when the e-Contract started , it has plotted to fool the client by
    created two  unclear e-contracts, Effective Date jump to Before the Modern Agency arrive to my home,  on the just agreeable website.
    Local @ofca.gov.hk of communication department retain along with ISP company 2 months.
    WHO , WHERE BEST FOR A CLIENT TO GET HELP FOR THIS PLEASE?
    21) others at later time...
    Blue Oisou
    Julie L. HUANG

  • How to access Survey from Public Internet

    Hi Gurus,
    I am unable to access survey sent to my yahoo E-Mail ID from public internet. (Error: unable to find the host sapcrm.sap:8000)
    However, I am able to access the same survey sent to my Yahoo E-Mail ID in my Laptop where SAP CRM 7.0 is installed.
    Please provide your help on what additional configuration that I need to do to access survey sent to my Yahoo email ID from anywhere.
    Do need to install SAP Web Dispatcher?
    Thanks,
    Bujji

    Hi,
    If you are trying to open your survey from internet you need to use a web dispatcher in DMZ. CRM server must be within a firewall of and you would be accessing URL from outside your network it requires a port to be opened in network firewall.
    Please follow the given blog for detailed explanation.
    /people/gregor.wolf3/blog/2005/11/07/setup-sap-web-dispatcher-with-url-filter-on-suse-linux-90
    Gaurav.

  • Windows 7 RC - I can't change my network from public to work

    After a lot of job, I connected my W7 beta PC with my XP PC, but when I upgrade to W7 RC, I am unable to do this.
    I have two net adapters: one linked to the internet cable modem and it is OK (public network). The other linked with a switch but W7 assigned this as unknown public network and I can't change it to home or work network. In W7 beta I assign a work network and it worked.
    Thanks.

    SOLUTION :
    WINDOWS 7 WILL AUTOMATICALLY TAG THE CONNECTION AS UNDEFINED NETWORK WHEN IT IS UNABLE TO DETERMINE THE TYPE OF THE CONNECTION AND YOU ARE NOT ALLOWED TO CHANGE THE NAME AND TYPE OF THE NETWORK
    The possible reasons are :
    a. You are connecting to a network with TCP/IP configuration to automatic but the network doesn't have a DHCP server;
    b. You configured the TCP/IP manually with static values but didn't specify a Default Gateway;
    The possibles solutions are :
    a. you are using dynamic IP, so you have to set up a software DHCP server on the 2nd subnet
    b. you are using static IP, so set up a default gateway on the 2nd subnet NIC
    ( Source : http://windows7forums.com/windows-7-networking/4416-how-change-network-type-2.html  )
    Hope this helps ^^
    This solution works -- but unfortunately it requires the other network adapter to be on DHCP. If you want two adapters with fixed IP, you get messages that having two default gateways "does not work properly".  I tried it anyway -- this resulted in an unreachable internet via router. This all is in Win 7 RC, I will try it on a RTM (Ultimate) in a few moments, but I'm not expecting an improvement.
    There is one thing you can do to ignore the problem without most of the negative aspects: turn off the firewall for your "private" network adapter. I don't see much danger here as that's roughly what would happen anyway if you could set it to private.
    Having one line set to DHCP (to the router) and the other to use fixed IP will also not be without side effects. Suppose the DHCP line is only 100 Mb, while the internal net uses 1Gb. This will result in all network trafic using a computer name to pass via the 100 Mb line, which is probably not what you wanted. Maybe you could remedy that with a route command; but I have not succeeded in a non-temporary solution to this as the routes are not kept across reboots -- any help welcome.
    Getting a DHCP server into this business will also not solve the problem, because then this computer needs to be online all the time, which is not what I would want. If your router (like mine) provides DHCP, you also get problems, because having two DHCPs will usually get you into trouble (this I read from other posts, never did it myself.)
    Whoever is responsible for this mess at Microsoft should either provide a very good explanation or preferably fix it as fast as possible.
    Maybe I don't understand you, but, if I have a router I don't need to use two adapters, I simply use the router as server and connect all of my computers to it.

  • Accessing iCloud from public computer

    Mobile me allowed access from a computer not synced by logging on to MobileMe.com. This allowed me to see my personal calendar or address book when I was at work or visiting friends.
    Will iCloud have a similar feature ?

    Yes.
    https://www.icloud.com

  • TS1559 I have tried to access wifi from my 4s which has the greyed out wifi button as outlined but still no good. What else can I do

    I have a greyed out wifi button for wifi. I have tried to reset the network connections as suggested but this has failed. Any ideas?

    Make an appointment at any Apple store.

  • Changing modifier keys in keyboard preference pane has no effect

    I use a standard "windows" usb external keyboard. In 10.5 you could remap the "Command" and "Option" keys to match the "Mac" layout. In 10.6 the preference pane is still available, but no matter how you change the pop-up menus the keyboard layout is not changed. See http://iamwa.de/45
    I have verified this to be the case with three different USB keyboards.

    @mtrichardson: THANK YOU!!! I've been having problems my modifier keys for months, and was using the section of the modifiers that affected ALL keyboards to swap the modifier keys. That section was apparently removed in snow leopard which left me high and dry until I saw your post. I tried unplugging the mouse and THEN configuring the USB keyboard, and that did the trick!
    Mouse is a logitech mx revolution, which I love, but it apparently causes some strange side effects. I should never have installed Logitech's drivers.
    Thanks again,
    -- Mike

  • Limit change access to all useres exept the one that created the document

    Hi,
    I wonder if it's possible to limit the change access only to the user that has created the document when it's in a specific status.
    This is what the customer wants:
    When a document is set to status K the document should be locked and no other users should be able to create a new version.
    There should be a admin group that can create new versions and change the document. - This is solved
    Best regards Kristoffer

    Hi Krip,
    generally I would recommend you to maintain one status of type 'O' for a document type in your system. This kind of status will allow a second user to display an already checked out original. If user A checks out the original and there is such a status maintained for this document type the system will change the status automatically to this status of type 'O'. Then a second user is able to display the last checked in version of this original in CV03N too. Without such status type the second user is not able to display the checked out file. This was implemented to avoid that two users may be able to change the same original at the same time. I hope this information could be useful for you.
    Best regards,
    Christoph

  • Accessing data from old hard drive connected to HP Pavillion 500-242ea

    Recently i purchased HP Pavillion 500-242ea ( OS Windows 8.1) as my old pc died.I connected the old hard drive via Usb adaptor kit.The old drive shows up in device manager and file explorer and disk management as F drive but does not show volume. I know the old drive is not full and the drive is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.Any one know how to access data from old drive which has IDE cable.
    Please help need to copy imporatant files from old drive.
    Thank you
    This question was solved.
    View Solution.

    Just had to ask, do you know the difference between hard drive and CD/DVD drive?  Don't get angry, read this.
    You said " I know the old drive .......... is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.'
    All that implies a CD/DVD drive. You can not put a disc into a hard drive.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Public access specifier in interface

    I have a slight problem with my code below. I created a file and named it ClosedCurve.java* and wrote all code into the file.
    My code below wont be compiled. unless I add an access specifier public . and I do not understand why i need to do that. I got an error that say "Cannot reduce the visibility of the inherited method from ClosedCurve"
    package classs.and.objects;
    public interface ClosedCurve {
        double computeArea();
    class Triangle implements ClosedCurve {
        double computeArea() // I need to change to public double computeArea()
            return 0.0;
    }

    The default specifier within the interface (in fact the only specifier within the interface) is public. The default specifier (when none are noted) for classes is package-private which is less visible than public.
    Please have a look here: [Controlling Access to Members of a Class|http://java.sun.com/docs/books/tutorial/java/javaOO/accesscontrol.html]

  • I can't access email from my iPhone 3gs since changing email password

    Hi all,
    iPhone 3s 16GB
    iOS version: 6.1.3
    ISP Bigpond Cable
    I can't access my email from my iPhone 3GS.
    This is an iPhone problem, not an ISP problem.
    I know this because I can access my email from both my laptop and webmail.
    This is occurring here at home via my WiFi network and also a few kilometres away via 3G.
    This morning I had to change the password on my Bigpond Cable internet email account.
    Whenever I try to access email from my phone I receive the following error:
    "Cannot Get Mail"
    "The user name or password for "**** *****" is incorrect."
    There are two buttons, one captioned Settings the other OK.
    Both the user name and password are correct. This happened perhaps 4 or 5 times in the 6+ years I was with Internode and has happened a couple of times in the 20 months that I've been on Bigpond Cable.
    I have re-entered my email account and connection details multiple times to no avail.
    I have tried deleting the account, then rebooting my phone and creating a new account, but that didn't work.
    I tried deleting the account, turning the phone completely off, waiting one minute and then after turning it back on, creating a new account but that didn't work.
    I know I am entering the correct settings because before I deleted the account the first time, I took a series of screen captures from the Settings App and I also have the settings from MS Outlook to refer to.
    Its as though somewhere in the phone, the old email password is being stored and being used instead of the new one, but I don't know where that could be except in the Settings app, "Mail, Contacts, Calendars" and that is where I am entering the new password.
    The only solutions to this problem I found by searching are those that I have already tried and haven't worked for me.
    Reverting to the old password is not an option. My account was compromised by Malware, hence the password change and a complete scan of my laptop.
    Any ideas?

    The problem was resolved by erasing the entire contents of my phone and then restoring it, setting it up as a new phone.

  • I'm apple user. some one has hacked my user ID profile & has changed my security questions. Also hacker has give rescue email , which is absolutely unknown to me.Resultantly i can't make any purchase from apple. How apple can help me. Thank

    I'm apple user. some one has hacked my user ID profile & has changed my security questions. Also hacker has give rescue email , which is absolutely unknown to me.Resultantly i can't make any purchase from apple. How apple can help me.
    Thanks in anticipation.

    You will need to contact Support in your country to get the security questions reset (these are user-to-user forums) : Apple ID: Contacting Apple for help with Apple ID account security (if your account's password has been changed then they should also be able to reset that for you)
    When they've been reset you can then use the steps on this page to change the rescue email address to an account that you have access to, for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses

Maybe you are looking for

  • How to disable save option from adobe toolbar in Acrobat Reader

    We need to disable Save option from Acrobat Reader plugin in Internet Explorer 8/9/10 version. Acrobat version is X. Is it possible to disable Save ( Floppy Disk) icon? We have disabled printing and copying. Please help

  • Keep attachments in receiver file adapter

    Hello, We receive via Abap proxy a txt file by attachment, and we need to archive that file in other machine using a receiver file adapter but the receiver file adapter doesn´t have any keep attachment option. How can we achieve that? Thanks! Luis

  • Different gamma between Final Cut & Quicktime with ProRes

    I am experiencing a gamma shift in my exported ProRes clips from Final Cut when viewing in Quicktime (typically, Quicktime's gamma results in a more washed-out file, and this seems to be specific to my ProRes exports). Is anyone else having this prob

  • Tab control crash

    I was playing with tab control and I saw this crash. No code in block diagram. I added tab control, added couple of tabs, deleted 1 tab and then I saw this crash. Thanks. CVI 2010 LabVIEW 2011 SP1 Vision Builder AI 2011 SP1 Attachments: LV Crash.zip

  • Revaluation of PO

    Dear All, My client  want to revaluate production orders at actual prices, but we have only one costing version for plan and actual. Exactly I don't know how to revaluate production orders. As we have only one version, I want to change the activity r