Changing an Object in the Universe - does this auto show in the document??
Hello
I have to make some changes to some Dimension and Detail objects in my Universe as some of the underlying data is changing and so case statements that I have in my objects will need to change. For example, say I have an object called "Colour Description" then:
CASE WHEN code = 1 THEN red END
will now change to
CASE WHEN code = 1 THEN blue END
My question is, will this change in the code of the object automatically filter through to every document that the object is used in or will i have to go through every document that uses it to make sure the change has been made to the SQL.
Thanks in advance.
Julian
Once you have exported the universe, it will change the object for each report that does not have the "Do Not Generate SQL" option checked the next time that you log on and run it - literally the next time that report interacts with the CMS and find out its universe has changed, it will update the SQL. As long as you're not changing data types, you will be fine.
Similar Messages
-
BSP for Creation and change and display of the documents in SAP R/3.
Dear All,
In SAP R/3 system, the documents can be maintained using the T-Codes CV01N, CV02N, CV03N for creation, change and display of the documents. Users is allowed to access to these transaction using the BSP application. The BSP page would be used to enable access the T-Code CV01N, CV02N, CV03N and allow uses to carryout the functionalities of check in and checkout of the document and the object links.
do i need to replicate all these T-Codes in BSP application?
If anybody hv done this...pl suggest me and give me the code.
Thanks & Regards
Pradeep
Message was edited by:
Pradeep Reddyif you want this out of BSP, yes you have to code all of them there is not easy way.
but if the idea is to webenable these transaction and you dont have much time/resource to do it , easiest way is to go with ITS. downside of this is that you dont have much control over look and feel.
If you are on WAS6.40 or above your application server comes with integrated ITS and enabling the same is quiet simple.
Regards
Raja -
How can I change one section of the document to a landscape orientation and not the whole document?
Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry -
How do I change a character in the document to another character in one command?
How do I change a character in the document to another character in one command?
You mean everywhere? Use Find/Change
-
'adobe' is null or not an object...what does this mean???
I keep trying to download flash player but every time I come on to the adobe website there are always errors on the page that range from the 'null object' thing, to 'access denied to flash (or adobe flash)'. I've adjusted the security settings (enabling/prompting..etc) for activex and the other bits...and I've installed explorer 8...but it still won't let me download flash player. Can someone help? This laptop is in danger of being thrown out of the window if it keeps doing this!
Hi,
javascript isn't made by sun, so you won't find it here, but google can help you out:
http://www.google.se/search?hl=sv&ie=UTF-8&q=javascript+forum&btnG=S%C3%B6k&meta=
/Kaj -
What happens in SP2013 when a user gets married and changes their name in AD?
My understanding is that after a full (?) User Profile import and a People crawl (Full/inc?) - their display name in SharePoint will be updated but in SP2013 do the entries in People picker and User Info Lists also get updated or are their manual steps
that have to be taken?
Thanks
JFirst, User Profiles will be updated after the next incremental sync. SP 2013 only does Full User Profile syncs manually. A full sync is not really required.
Second, there are two timer jobs that will sync the user profile with the user lists in each site collection. The "Quick" job only syncs new users, while the "Full" job should sync all user changes. The "Full" job
runs hourly by default.
Third, the people picker should be getting its info from AD, although there is some caching that goes on. So it should pick up the change from AD when the cached information ages out.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Sequence value changes while i view the document
hi.,
I m using jdev 11.1.1.5
I had created a sequence for GlHdEO.GlJrnlNo
I had used this code for the sequence in impl method of that entity object
SequenceImpl s = new SequenceImpl("jrnl_no",getDBTransaction());
setGjhJrnlNo(s.getSequenceNumber());While i click the create insert it works fine with the next number
When i save this document and next time while i run the document in my browser component the value had been changed
pls verfiy the link when i reopen the document in Browser component
http://www.4shared.com/photo/jt9GTGj_/E018.html
pls verify the link when i click create insert
http://www.4shared.com/photo/oVSIJ8P8/E019.html
could any one please help meThank you for the reply
i had followed all the steps
http://mjabr.wordpress.com/2011/03/11/make-sequence-number-as-default-value/
but i m getting the error as
(oracle.jbo.domain.DataCreationException) JBO-25009: Cannot create an object of type:oracle.jbo.domain.Number from type:java.lang.String with value:adf.object.nextVal("jrnl_no"); -
Event on placing the library object on the document
Hi,
I'm lokking for the technical event (like kBeforeOpenDocSignalResponderService) when any Object from the Indesign library is placed on the opened document.This should help
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/97-deferred-trainstop-navigation-1528557.pdf -
Change Posting Date in the Document (BUDAT) in VL02N
Hello everyone.
In the VL02N transaction, when I push the "Post Goods Issue" button to create the Material Document, the system puts in the BUDAT field (Posting date in the document) in the MKPF table the value of today (sy-datum). I need to change this value but I can´t find an user-exit that let me do it.
Any idea?
Thank so much.I finally found a badi: LE_SHP_GOODSMOVEMENT.
Goodbye. -
Why does this bar show up when I press the tilde key?
Hey all, I have this mysterious bar that shows up when i press the tilde key in AE. It's distracting.
https://www.flickr.com/photos/jeffbriant/14040981723/
(Adobe wouldn't let me upload a picture so I used flickr)
EDIT: I'm using a Mac desktop.Try quitting After Effects, deleting the entire preferences directory, and restarting After Effects:
DRIVE/Users/USERNAME/Library/Preferences/Adobe/After Effects/ -
FormDesigner.exe crashed when I attempt to move an object in the document hierarchy
I'm using LiveCycle Designer ES2 to create a dynamic XML form.
I have a flowed page layout with a series of subforms arranged from top to bottom. The order of the subforms is necessary. When I attempt to move a subform up or down in the Hierarchy panel, the entire application freezes, then crashes. This happens regardless of what type of object is selected, number of selected objects, etc. Can anyone provide some assistance? I've tried rebooting, as well as running the application in comatibility mode with Windows XP (SP3); I have not yet tried uninstalling and reinstalling the application.
I can't attach the pdf as the content is sensitive in nature.
Technical Details:
Running Windows 7 x64 with all updates installed.
LiveCycle Designer ES2 version 8.0.0.2.20101008.1.734229
I have the latest version of CS5.5 Design Premium installed, as well as the latest version of Premier.I got it figured out. I had a number of actions that pointed to nonexistant objects I had deleted.
-
Why does this continuously show up in Console?
I just discovered that this (below) is continuously appearing in the Console, looks like it happens every 10 seconds.
Jun 8 01:29:59 iMac-24 com.apple.launchd.peruser.501[347] (com.wyse.MacCompanion[11171]): posix_spawn("/Applications/Wyse PocketCloud.app/Contents/MacOS/Wyse PocketCloud", ...): No such file or directory
Jun 8 01:29:59 iMac-24 com.apple.launchd.peruser.501[347] (com.zeobit.MacKeeper.Helper[11170]): Exited with exit code: 1
Jun 8 01:29:59 iMac-24 com.apple.launchd.peruser.501[347] (com.zeobit.MacKeeper.Helper): Throttling respawn: Will start in 10 seconds
Jun 8 01:29:59 iMac-24 com.apple.launchd.peruser.501[347] (com.wyse.MacCompanion[11171]): Exited with exit code: 1
Jun 8 01:29:59 iMac-24 com.apple.launchd.peruser.501[347] (com.wyse.MacCompanion): Throttling respawn: Will start in 10 seconds
Jun 8 01:30:09 iMac-24 com.apple.launchd.peruser.501[347] (com.zeobit.MacKeeper.Helper[11172]): posix_spawn("/Applications/MacKeeper.app/Contents/Resources/Helper.app/Contents /MacOS/Helper", ...): No such file or directory
Jun 8 01:30:09 iMac-24 com.apple.launchd.peruser.501[347] (com.wyse.MacCompanion[11173]): posix_spawn("/Applications/Wyse PocketCloud.app/Contents/MacOS/Wyse PocketCloud", ...): No such file or directory
I have deleted Wyse Pocketcloud and I do not own either MacKeeper or MacCompanion.
I also get this in Console, but it comes less often, every minute or so:
6/8/11 1:25:05 AM Firewall[93] Deny Dropbox data in from 192.168.0.13:17500 to port 17500 proto=17
6/8/11 1:25:05 AM Firewall[93] Deny Dropbox data in from 192.168.0.13:17500 to port 17500 proto=17
6/8/11 1:25:05 AM Firewall[93] Deny Dropbox data in from 192.168.249.1:17500 to port 17500 proto=17
6/8/11 1:25:05 AM Firewall[93] Deny Dropbox data in from 192.168.143.1:17500 to port 17500 proto=17
6/8/11 1:25:05 AM Firewall[93] Deny Dropbox data in from 10.211.55.2:17500 to port 17500 proto=17
6/8/11 1:25:05 AM Firewall[93] Deny Dropbox data in from 10.37.129.2:17500 to port 17500 proto=17
I've asked elsewhere with no response.
ThanksGet rid of MacKeeper.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.
Do you have DropBox installed? If so stop using it also. -
Does this website show OK on PC and Internet Explorer?
Hello guys,
I have just created this simple website (with Mac using Flash).
It looks fine on my Mac and Safari, but I have no opportunity to check it out on PC and Internet Explorer.
So I am wondering if there are some PC users among you, so you could possibly check this website for me, if everything looks OK and works properly.??
Browser background should be black. (videos should open in a new window, with browser background also black)
Thank you so much for your help.Or maybe there is some html code ? I am not sure.
It might be worth checking on the code. The W3C markup validator finds a few issues with the page:
[Errors found while checking this document as -//W3C//DTD HTML 4.01 TRANSITIONAL//EN!|http://validator.w3.org/check?uri=http%3A%2F%2Fwww.icebergfil ms.com%2FcineDemo.html&charset=%28detect+automatically%29&doctype=Inline&group=0 ] -
“Unsaved Pages Document.pages” couldn’t be moved because you don’t have permission to access “Autosave Information”.
I am not able to "duplicate" my Page or Keynote document. I am getting a dialog window that says "“Unsaved Pages Document.pages” couldn’t be moved because you don’t have permission to access “Autosave Information”.
I noticed that I have three different log in accounts on my computer, much to my surprise. Could that be causing this problem?I noticed that I have three different log in accounts on my computer, much to my surprise. Could that be causing this problem?
That's unlikely. You would have had to save a document into another user's account and be trying to work on it - directly from their account.
"“Unsaved Pages Document.pages” couldn’t be moved because you don’t have permission to access “Autosave Information”.
Have you checked the permissions on your Autosave Information folder? Here are mine. -
iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening???
Any time you've changed anything in your billing, it does this once to very things.
Maybe you are looking for
-
I BADLY NEED A HELP PLEASE after updating to IOS 7.0.2 i can no longer download or even update my app thru apps store i already tried signing out and resetting my iphone but after the reset i can no longer sign in to my apple id it says" cannot conne
-
Contacts and categories in address book multiple duplicates
Hello; I am not talking about having one duplicate but 200-300 of a single contact or a category. So please do not redirect this on the usual sync+icloud discussions... I have resetted my AB but today they started multiplying like rabbits again. I no
-
SAP Office Document - open in customcontainer
HI, i try to open to SAP Office Document in "inplace" mode in my own dympro. Therefore I have an reference of a CL_DOCUMENT_BCS class. There is an interface with a if_document_display_bcs ~ display_outplace method and a if_document_display_bcs ~ disp
-
Hi, How to do this? If one html page does not be activated (means the cursor does not move in the page) for 3 minutes, for example. After that, it will go to another HTML page automatically. Is there anyone know how to do? Or give me some hints or ex
-
Retrieve multiple records of Business Object in a Application Service?
Hi, I am working on CE71. I want to know how to retrieve multiple records of a Business Object in a Application Service? Regards, Rahul