Changing Calendar Permissions for All Users in PowerShell

We just recently deployed Exchange 2010 and are needing to set the permissions to all users to an Editor level. Can this be done in PowerShell?

Hi,
Please try the following commands:
$all=Get-Mailbox -RecipientTypeDetails UserMailbox
$all | ForEach {Set-MailboxFolderPermission -Identity “$($_.alias):\Calendar” -User default-AccessRights "Editor"}
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

Similar Messages

Unable to change keyboard layout for all users on Windows Server 2012 R2

Hi,
I have a requirement where I need to support national keyboard layout for Danish for all users on that machine. When I ran the powershell with script Set-WinUserLanguageList
-LanguageList da-DK it only sets the Danish keyboard layout to the specific logged in user.However the for other users its same English(US) keyboard which is not expected.
Please help me how to set the Danish keyboard for all users on the machine. Its Urgent!Thanks

Hi Mike,
Thanks for reply.
But I need to configure everything using powershell script. Is it possible to use powershell script to setting group policy/ adding logon script ?
These are pretty basic administration tasks and almost always quicker to accomplish with the GUI. Why do you want to use a PowerShell script?
EDIT: Here's some information on the topic however:
https://technet.microsoft.com/en-us/library/cc781361%28v=ws.10%29.aspx
http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/06/use-powershell-and-group-policy-for-your-logon-script.aspx
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

HELP - Change cache location for ALL users.

I am in desperate mode here, so I appreciate any help...
I just installed 1.4.2_08 on my Citrix environment. I have a GPO that only allows 30mb of data to be saved in their profile and this is the max that I can make it. The problem is that the website created that uses this version of JRE creates a an 11mb file twice in the users profile. This blows up their session and they are no longer allowed to log off until I go in and clear it off. I've only had about 10 users that I have had to do this too, but I can see it's going to get a lot higher. Basically I want to change the cache location for all users, not just my profile, and redirect it to the users 'My Documents' folder. This way my GPO that then redirects the users 'My Documents' folder can have this folder on their home drive.
Please, help! Thanks a bunch!!

I had the same problem, but fixed it with this solution:
I added [deployment.user.cachedir=c\:\\temp\\cache] to the deployment.properties file.
(located at C:\Documents and Settings\<USER>\Application Data\Sun\Java\Deployment)
Then i deleted the cache directory.
Now i am making my one Transform file for the deployment of java 1.6.0_05.
Does anyone knows how i can change the cache files etc in my transform file.
Thanks a lot!!

Read/Write Permissions for all users and all objects in Users:Shared

Hi:
I am using an application called "iView" to manage my image files. When importing images from my camera through that application, it creates a folder with the current date. The root folder is "Users:Shared:Images", so that everyone using our Mac can access the files. However, the files' permissions are only read/write for the user who downloaded the files (typically me), but I want everyone to be able to edit and delete files. Of course I can change the permissions manually, but there has to be a better way. (In addition, changing the permissions manually afterwards causes Time Machine to backup the files with the modified permissions again).
What do I have to do?
Thanks in advance.
Hinrich

That is the way that permissions work. If you are the owner of a file and want others to be able to read and write it, then you have to give them the permission to do so. To automate this, you can attach a folder action to the shared folder, for example:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on adding folder items to ThisFolder after receiving AddedItems
repeat with AnItem in AddedItems
tell application "Finder" to set everyones privileges of AnItem to read write
end repeat
end adding folder items to
</pre>

Changing Default language for all users

Hi ,
We have upgraded EP 6.0 to EP 7.0 . After the upgrade when users are logging into the portal default langauge is being set from the browser .
I want to set the default langauge to EN for all the users. My prtDefault.properties file already contains following entry :
This is the default language to be used when none is specified
request.defaultlanguage=en
request.defaultcountry=us
Do I also need to ADD
request.mandatorylanguage=en
request.mandatorycountry=us
properties in this file ? Please suggest.
Regards,
Ganesh

Hi Ganesh,
Can u pl post how you solved this.
Regards,
Reema.

Changing English language for all users

Hi experts
I want to set the English langauge to Spanish for all the users, can someone tell me how to do please?
thanks!!

Hi Biroj
thank you very much for your answer, I solved the problem and I found the file with your help.
thanks!
Edited by: lizcam on Aug 24, 2010 11:05 AM
Edited by: lizcam on Aug 24, 2010 11:06 AM

How can I change Aperture permissions for new user account

I migrated my old user account (Ezra) to my new Mac mini from my old MBP laptop, but it would not allow me to keep the same name, (Ezra) so I picked a new one (Karyn). The problem is that now I can't access any of my other Aperture Libraries on my external storage array (Drobo) due to permissions errors. What is the best course of action to get back to working with Aperture? Is there a way to change an existing user account name to match what it used to be? I want the (Ezra) account from the Mac mini to eventually migrate to a freshly purchased Macbook Air later, then I could delete it from the Mac mini to rid the problem of duplicate user account names.

Sounds like when you installed the new system you created a user account on it and then used migration assistant to copy over the files from the old system,. IS this correct?
If so you will have other problems down the road with other applications also. The best thing to so if you still have the old system and have not done to much work on the new system is to redo the install and use setup assistant. This way your old account will be brought over to the new system and you will not have permissions problems.
You can try one thing. Do a Get Info on the Drobo Drive and see if at the bottom of the Info window you see this:
If that is there for the drive (and I don;t know if the Drobo will have this option) you can select the box and you might be able to get at your libraries.
As I wrote however, even of you fix this problem there is a good chance you will run into others later on.
regards

Update hosts file and Change proxy settings for all users on Mac

I am in a large environment with many Mac users. We have a Windows based proxy server that we are switching over within a few weeks. So far we are manually having to go to each Mac and change the proxy settings under the users account. This is a very long and painstaking process as users are on vacation etc. and our cutoff date is fast approaching for the old proxy.
we also are having to log into each workstation as administrator go into the terminal and so sudo passwd root then change the password then do sudo vi /etc/hosts to edit the hosts file.
Is there a way to change the proxy server setting for safari and firefox globally without having to log in as each user on the Mac ?
Or is there an automated way through a script that the users can run ?
These macs authenticate to active directory. They do not have a mac server but I was told to post this question here versus the desktop area.

Most browsers include an [automatic proxy configuration (PAC) mechanism|http://en.wikipedia.org/wiki/Proxy_auto-config] and the transparent configuration of proxies, and Safari and Firefox are no different here.
The usual approach here is to have folks visit a site and select the PAC file, or to push the file out. Here is a comfiguration example from [UConn|http://helpdesk.uconn.edu/trouble/proxy/autoprox.html], and another from [Rice|http://proxy.rice.edu/setup.php], and there are others around and visible via Google.
The [pactester|http://code.google.com/p/pactester> tool might be useful, too.
If y'all get some DNS entries set up (various web browsers have [Web Proxy Auto Discovery (WPAD)|http://en.wikipedia.org/wiki/WebProxy_AutodiscoveryProtocol], when last I checked [Safari needed a little help|http://www.macosxhints.com/article.php?story=20090711031033128]) and have your firewall raise an appropriate diagnostic page, you won't have to go through this again, either.
None of this stuff is particularly specific to Mac OS X or to Safari; the PAC stuff is fairly generic, and WPAD is used with various boxes. (Try Safari with WPAD, but you might still need to reference that PAC file. And if you do, using WPAD-compliant naming would probably be a reasonable approach.)
The hosts files? You're really still using those? Any chance you can get real DNS working? That's a whole lot less work, and now is the time to deploy that; if you're going to mess with everything, then you can use that effort and that requirement to (also) move forward in your networking capabilities.

Need to change email address for all users / employees and their supplier

Hi All,
Our organisation is going through some infrastructure changes and all employees email addresses will be changing throughout the department in the next few weeks.
Is there a supported method to update the FND_USER.email_address, PER_ALL_PEOPLE_F.email_address and Employee Supplier email address within our Oracle system to the employees new email address
Would you be able to provide a solution or recommend a datafix (SQL Update script)?
Many thanks,
Lance

Oracle's update:
UPDATE
======
kindly there is no ready code script for this issue
as per Oracle policy ,customizations are not supported
Thank you,
Global Customer Services
I'll look into the Packge FND_USER_PKG thanks and see what i can spot. Any one ever done something like this before?
Thanks,
Lance

Audio output device same for all users Yosemite

I use more then one account on my recent Macbook Pro. For the first account I like to have the audio output set to the speakers but for the other account I want the audio output set to the headphones.
With Mavericks the Macbook remembered the last audio settings for each user account.
With Yosemite any changes to the audio settings (input, output,system sound, etc.) on one account affects the audio setting on other the user account.
I tried various audio settings to see if it affected them all. It seems to.
I tried seeing if it happened only when the users accounts were logged in or it was different on boot etc. It seems to always change the settings for all users no matter what.
I tried resetting the PRAM but that did not solve it.
I tried a 3rd party program called AudiSwitcher from the App store to see if this could help but no luck.
I searched here and more widely to see if anyone else was reporting this and found one other person who seemed to mention the same problem and they concluded "I did some tests and came to the conclusion that the system now does not remember settings for each user, and applies the current setting of audio output for all accounts."
Curious to know:
     a) Does this affect other people? If not, I'll look for conflicting apps on my computer.
     b) Is this intended behavior or should I look for a way to report it as a bug?
     c) And most importantly if there is a way around it?
Thanks!

I'm also have the same problem. I tested it on fresh Yosemite installation without any additional software. Your mentioned my conclusion about tests.

Setting Crystalviewer for all users in CMC

I am trying to setup Crystal Reports server 2008 VI for my organization. One of the requirement is to disable the Preferences in inoview and set the crystal report viewer to the Web ActiveX control for all users. I was able to disable the preference parameter in CMC -> Allications -> InfoView, but could not find away to set the default viewer for all InfoView users to the activeX control? Is this doable? If so I would like to know how.
Any help is greatly appreciated.

Enable preferences and go to Infoview, click oh Preferences and change the view format to ActiveX and save it. Do this for Administrator users.
There is download available, using that you can make the same change for all users, check the below link.
Re: Setting the same "InfoView Start Page" to all users in one group
With that you can change the settings for all users as Administrator, once done remove the access to Preferences.
Thanks,
Hari

Find all Office 365 users where calendar permissions on default user is not "NonEditingAuthor"

Hi
How do I make a Powershell script to find all users where calendar permissions on "default" user is not "NonEditingAuthor" in Office 365?
Best Regards
MSISOM

Hi MSISOM,
To export calendar permission on default user, please refer to this script:
$rptCollection = @()
$mailboxes = get-mailbox -ResultSize Unlimited
$mailboxes | foreach-object{
$alias = $_.alias + ":\Calendar"
$displayName = $_.DisplayName
write-host $alias
$permissions = Get-MailboxFolderPermission $alias | Where-Object {$_.user.UserType.value -eq "Default"}
if($permissions -ne $null){
foreach($perms in $permissions){
foreach($right in $perms.AccessRights){
$rptCollection += New-Object psobject -Property @{
"User" = $perms.User
"Identity" = $perms.Identity
"StringAccessRights" = $right}
}$rptCollection
The result is for your reference:
Then you can filter the result with the cmdlet "where-object {}"
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

How to change settings for all users?

Hi All,
In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
Best Regards,
Arti.

Hi Arti,
In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
Try the first one and I hope you will get the solution.
Regards,
Nishit Jani
Award points only if you find the information useful.

How to change preferences for all users in a Citrix enviroment

Hello.
I need change some preference settings for all users in my Citrix enviroment.
I know change the preference settings for a user, of course, but a have 160 users and a need to change some settings configuration one time on the server for all users.
The preferents I need change are: 'disable javascript' and 'don't show pdf in IE'
Thanks.

Hi Arti,
In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
Try the first one and I hope you will get the solution.
Regards,
Nishit Jani
Award points only if you find the information useful.

Why does Firefox 31 change all PDF icons and opening in browser, require a fix using REGEDIT to fix for ALL USERS on a computer?

The solution to use REGEDIT in the question linked below almost fixed my trouble with PDF files on over 30 computers, with several users on each computer:
https://support.mozilla.org/en-US/questions/1013642
But I needed to fix it for ALL users on a computer, without logging onto each account, on each computer. My fix was to logon as administrator and change the following system-global key instead:
HKEY_LOCAL_MACHINE\Software\Classes\.pdf
Name: Default
Type: Reg_SZ
Data: FirefoxHtm
Changed the data from FirefoxHtm to AcroExch.Document.11
I use Adobe Reader XI on Win7 Pro, 64-bit machines.
The problem started when I ran a downloaded file to install the new version of Firefox on the computers.
Why would Firefox require me to use REGEDIT in this manner to fix the problem?

This only happens when you set Firefox as the default browser and Firefox thinks that there is currently no application the handles PDF files.

Changing Calendar Permissions for All Users in PowerShell

Similar Messages

Maybe you are looking for