Changing date in BDC

Hi ALL
I wanna to change the date in the flat file when I am entering into BDC, please give me the code for this one.
Regards
Praveen

Hi,
Try this...
Local variables to set date
DATA:lv_dd(2),
         lv_mm(2),
         lv_yyyy(4),lv_date1(10).
*pass the date field from file into a variable
SPLIT x_data_tab-str1 AT ',' INTO lv_date1.
Set Date into DDMMYYYY format or according to ur *requirement
    lv_dd = lv_date1+0(2).
    lv_mm = lv_date1+3(2).
    lv_yyyy = lv_date1+6(4).
    CONCATENATE lv_dd lv_mm lv_yyyy INTO x_final-bldat.
or if this does not work then use write to field statement
Regards,
Sridhar Reddy k
Message was edited by: sridhar reddy kondam

Similar Messages

Flat file to upload data using BDC for transaction MM01

Hi
I am trying to update data using bdc code has been attached below using a txt file.
It is updating the first set of data into the table mara ,but for the rest it is not
All the data from txt file has being loaded to internal table , but the problem is it does not gets updated from internal table to the database .
Only the first set of data has been loaded , rest of the data is not loaded
content of txt file
zsc zsc kg
zsv zsv kg
zsb zsb kg
Actual code
report ZMAT_UPLOAD
 no standard page heading line-size 255.
types declaration..........................................................................
types : begin of t_mat,
 matnr(20),
 desc(50),
 uom(5),
end of t_mat.
internal table and workarea declaration.......................................
data : i_mat type table of t_mat.
data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
 EXPORTING
 FILETYPE = 'DAT'
 TABLES
 data_tab = i_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
 'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
 '=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
 wa_mat-matnr.
perform bdc_field using 'RMMG1-MBRSH'
 'P'.
perform bdc_field using 'RMMG1-MTART'
 'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
 'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '=BU'.
perform bdc_field using 'MAKT-MAKTX'
 wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
 'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
 wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
 'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.

Hi Sumant,
just concentrate on bold one
report ZMAT_UPLOAD
no standard page heading line-size 255.
types declaration..........................................................................

data : begin of t_mat occurs 0,
matnr(20),
desc(50),
uom(5),
end of t_mat.
internal table and workarea declaration.......................................
*data : i_mat type table of t_mat.
*data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
EXPORTING
FILETYPE = 'DAT'
TABLES
data_tab = i_mat.---> t_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.------>loop at t_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
wa_mat-matnr.---->t_mat-matnr(change in this for ur wa to t_mat.
perform bdc_field using 'RMMG1-MBRSH'
'P'.
perform bdc_field using 'RMMG1-MTART'
'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.
Reward points for helpful answers.
Thanks
Naveen khan
Message was edited by:
 Pattan Naveen
Message was edited by:
 Pattan Naveen

Reading data through BDC

Hi all,
can i read some sale order data through BDC?
i am using BDC to create sale order.i need to change the net price when the condtion type is ZUR1.so i want to read the cond type.if it is ZUR1 , then only i will change the price.
how can i achieve this thing?
Regards
pabitra

while recording you can capture the condition type before net price.
and after the perform stament where internal table say record has condition type value,you can validate
PERFORM bdc_field       USING 'xyz'
                                           record-j_condition_type.
if record-condition_type = 'ZUR1'.
net_price = '999999'
    PERFORM bdc_field       USING 'abc'
                                         record-net_price.
endif.
regards,
pankaj
Edited by: Pankaj Singh on Mar 15, 2008 4:42 PM

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

Can we change data in string object.

Can we change data in string object.

Saw this hack to access the char[]'s in a String in another thread. Beware that the effects of doing this is possible errors, like incorrect hashCode etc.
import java.lang.reflect.*;
public class SharedString {
        public static Constructor stringWrap = null;
        public static String wrap(char[] value, int offset, int length) {
                try {
                        if (stringWrap == null) {
                                stringWrap = String.class.getDeclaredConstructor(new Class[] { Integer.TYPE, Integer.TYPE, char[].class });
                                stringWrap.setAccessible(true);
                        return (String)stringWrap.newInstance(new Object[] { new Integer(offset), new Integer(length), value });
                catch (java.lang.NoSuchMethodException e) {
                        System.err.println ("NoMethod exception caught: " + e);
                catch (java.lang.IllegalAccessException e) {
                        System.err.println ("Access exception caught: " + e);
                catch (java.lang.InstantiationException e) {
                        System.err.println ("Instantiation exception caught: " + e);
                catch (java.lang.reflect.InvocationTargetException e) {
                        System.err.println ("Invocation exception caught: " + e);
                return null;
        public static void main(String[] args) {
                char[] chars = new char[] { 'l', 'e', 'v', 'i', '_', 'h' };
                String test = SharedString.wrap(chars, 0, chars.length);
                System.out.println("String test = " + test);
                chars[0] = 'k';
                chars[1] = 'a';
                chars[2] = 'l';
                chars[3] = 'l';
                chars[4] = 'a';
                chars[5] = 'n';
                System.out.println("String test = " + test);
} Gil

Can't view changed data in journal data

Hi,
I have implemented JKM Oracle 10g Consistent Logminer on Oracle 10g with the following option.
- Asynchronous_mode : yes
- Auto_configuration : yes
1. Change Data Capture -> Add to CDC, 2.Subscriber->subscribe (sunopsis),
3. Start Journal
The journal has been started correctly wothout errors. The journalized table has always the symbol "green clock". All is gook working.
And then i inserted 1 record in source table, but i can't view changed data in journal data. I can't understand why journal data was generated.
There are no errors.
Help me !!!

Did your designer was on the good context ?
Look the list box at the top right of the Designer interface.
You must have the same as the one where you define your journalization.

I can not map field after changing data source location

Hi
I have a small problem that I got a report file and database from my customer, after that I setup database, open the file and change data source to my setting. but some filed can not map. The field mapping widonw does not display all field in the table. Of course I have checked the missing fields are existing in the table.
OS:Windows7
DB:Oracle11
CR:XI Release 2
Does anyone have an idea?

hi,
In Map Fields window, there is an option "Match Type".
Please Unchek that option, so that you will be able to see all the fields from that table.
Also, while mapping please verify the datatypes of source and target fields.
Regards,
Vamsee

Can you help me about change data captures in 10.2.0.3

Hi,
I made research about Change Data Capture and I try to implement it between two databases for two small tables in 10g release 2.MY CDC implementation uses archive logs to replicate data.
Change Data Capture Mode Asynchronous autolog archive mode..It works correctly( except for ddl).Now I have some questions about CDC implementation for large tables.
I have one senario to implement but I do not find exactly how can I do it correctly.
I have one table (name test) that consists of 100 000 000 rows , everyday 1 000 000 transections occurs on this table and I archive the old
data more than one year manually.This table is in the source db.I want to replicate this table by using Change Data Capture to other stage database.
There are some questions about my senario in the following.
1.How can I make the first load operations? (test table has 100 000 000 rows in the source db)
2.In CDC, it uses change table (name test_ch) it consists of extra rows related to opearations for stage table.But, I need the orjinal table (name test) for applicaton works in stage database.How can I move the data from change table (test_ch) to orjinal table (name test) in stage database? (I don't prefer to use view for test table)
3.How can I remove some data from change table(name test_ch) in stage db?It cause problem or not?
4.There is a way to replicate ddl operations between two database?
5. How can I find the last applied log on stage db in CDC?How can I find archive gap between source db and stage db?
6.How can I make the maintanence of change tables in stage db?

Asynchronous CDC uses Streams to generate the change records. Basically, it is a pre-packaged DML Handler that converts the changes into inserts into the change table. You indicated that you want the changes to be written to the original table, which is the default behavior of Streams replication. That is why I recommended that you use Streams directly.

Yes, it is possible to capture changes from a production redo/archive log at another database. This capability is called "downstream" capture in the Streams manuals. You can configure this capability using the MAINTAIN_* procedures in DBMS_STREAMS_ADM package (where * is one of TABLES, SCHEMAS, or GLOBAL depending on the granularity of change capture).

A couple of tips for using these procedures for downstream capture:
 1) Don't forget to set up log shipping to the downstream capture database. Log shipping is setup exactly the same way for Streams as for Data Guard. Instructions can be found in the Streams Replication Administrator's Guide. This configuration has probably already been done as part of your initial CDC setup.
 2) Run the command at the database that will perform the downstream capture. This database can also be the destination (or target) database where the changes are to be applied.
 3) Explicitly define the parameters capture_queue_name and apply_queue_name to be the same queue name. Example:
 capture_queue_name=>'STRMADMIN.STREAMS_QUEUE'
 apply_queue_name=>'STRMADMIN.STREAMS_QUEUE'

Unable to change Date Created in Metadata

Please help with my first post...
Unable to change Date Created field in Metadata.
I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
Next I have to Import this into Aperture where the Date Created shows as "20090926".
Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
Thanks in anticipation.

Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
or
3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
nathan

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

Identifying Changed Dates on Documents in SAP B1

Greetingsu2026I have an unusual request that is somewhat long, very serious, and hope folks can help.
A headquarters customer believes a subsidiary company has u2018made upu2019 dates on invoices for previous billings. They describe the date changes as u2018radicalu2019 but I have not personally seen these invoices as of yet and am waiting a FAX. They requested I go into SAP B1 to see if someone has fabricated or made up or changed invoice dates and who it was. They have some specific large-dollar invoices identified to research. The person under suspect (who is no longer there) was considered an expert in SAP B1, so maybe she knew all of the different ways to change dates around. Being an expert means also she might have used some unusual ways to change dates to the ones she wanted.
Here are some of my ideas to discover this situation, but I hope someone can suggest even more steps because I would like to know every way that this situation can be discovered.
1. Open the AR Invoices and use Data > Change Log and concentrate on dates.
2. Run some SQL to validate document dates and system dates. SELECT T0.DocNum, T0.DocDate, T0.CreateDate, T0.TaxDate, T0.UpdateDate FROM OINV T0 WHERE (T0.DocDate does not equal T0.CreateDate OR T0.TaxDate does not equal T0.CreateDate). The results would show invoices that maybe had their dates changed.
3.Run a Document Journal in the Financial Module. Finance > Financial Reports > Accounting > Document Journal with the u2018Expanded Selectionu2019 of AR Invoices and a date range covering the invoices in question. Then see if the Transaction Numbers are out of sequence.
4. Run a Transaction Journal Report Financials > Financial Reports > Accounting > Transaction Journal Report with AR Invoices. Compare this report to Document Journal.
5. Run the Utilities functions of Utilities > Check Document Numbering to see if there any anomalies there in the document numbers.
6. Run the Administration > System Initialization > Document Numbering function to see if a special series has been set up.
7. Check out the AR Invoice numbering order by running another simple SQL covering a range of the invoices in question. SELECT T0.DocNum, T0.TaxDate, T0.CreateDate, T0.UpdateDate FROM OINV T0 WHERE T0.DocNum > 1583 AND T0.DocNum < 3251 ORDER BY T0.CreateDate. Then see if the AR Invoice Numbering Sequence is not consistent.
8. Check out those documents that are connected to each suspect AR Invoice and their associated dates by using the Target and Base Document icons. For example, if a Deliver Document has dates of January 2007 but the AR Invoice date is September 2006, then someone has played around with dates on at least one of the documents.
9. Get copies of the complete company database before the alleged changes were made and a company database as of today and compare the two contents. Only good if the backups are maintained for a long time.
Here come the questions on the ways I BELIEVE dates can be changed but not sure how to find and need to work on them:
QUESTION 1 u2013 If a person DTWs invoices up into SAP B1, how can I tell that DTW was used to change the dates, the date of the DTW run, and the dates that were changed?
QUESTION 2 u2013 If a person uses SQL to update dates on SAP B1, how can I find out that SQL has been used, the date of the SQL run, and the dates that were changed?
QUESTION 3 u2013 If a person goes out and changes the workstation and/or server Date and Timestamp Properties, how can I find that they did that and the date changes? You can do this on your PC by just changing the month, date, and year in Microsoftu2019s Date and Timestamp Properties.
QUESTION 4 u2013 I know SAP has a policy that no SQL can be used to update databases and/or tables and have been told some customers lost support because they did this. What does SAP do to discover this in their lab?
QUESTION 5 u2013 Are there any notes in the portals to help me find changed dates?
QUESTION 6 u2013 Are there any logs SAP B1 produces that can help identify such changes and how do I find and use them?
QUESTION 7 (and this is big) u2013 Are the other ways dates can be changed on AR Invoices and how would I uncover the way it was done and the needed information of Original Date and Changed Date?
Many, many thanks for any help provided since this is a serious situation. If you can make any suggestions it would be greatly appreciatedu2026
Zal
Edited by: Zal Parchem on Mar 13, 2009 7:31 AM

Hi Zal
If this person was an "Expert" on SAP Business One then the only way they would have changed dates would probably be directly in SQL itself. The best way to determine this would be to hope that they slipped up somewhere and forgot to change a particular date in let's say one specific table.
For invoices, start with the post date, doc date & create date. Then check each of these to the OJDT/JDT1 tables for any discrepancies. Next check the ADOC/ADO1 table for multiple instances on the invoice. If only 1 instance then check the create date, time & user as well as the aforementioned dates between OINV/INV1 & ADOC/ADO1. If multiple instances, check the dates from 1 instance to the next (This will indicate dates being changed in the system).
Next check the same dates against OINM table. If any of the dates do not tally then the SQL was changed directly.
Hope this helps. Let me know if you need further assistance.
Kind regards
Peter Juby

How to update changed data in alv grid.

hi experts,
i have a editable alv report how to update the changed data on the grid to database table when i click save.
can anybody tell me how to do this if possible with example.
thanks in advance.
regards,
venu

The code below isn't a working program, but has most of what you should need. Field-symbol <dyn_table> will always have what is in the grid.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
 <dyn_wa>.
DATA: pt_fieldcat TYPE lvc_t_fcat,
 ls_fcat TYPE lvc_s_fcat,
 new_table TYPE REF TO data,
 new_line TYPE REF TO data.
CREATE OBJECT g_custom_container
 EXPORTING container_name = g_container.
CREATE OBJECT g_grid EXPORTING i_parent = g_custom_container.
CLEAR ls_fcat.
ls_fcat-fieldname = 'MATERIAL'.
ls_fcat-datatype = 'CHAR'.
ls_fcat-intlen = 18.
ls_fcat-outputlen = 18.
ls_fcat-coltext = 'Material'.
ls_fcat-edit = 1.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'QUANTITY'.
ls_fcat-datatype = 'INT4'.
ls_fcat-intlen = 6.
ls_fcat-outputlen = 6.
ls_fcat-coltext = 'Qty'.
ls_fcat-edit = 1.
APPEND ls_fcat TO pt_fieldcat.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = pt_fieldcat
 IMPORTING
 ep_table = new_table.
* assign ref variable to a field symbol
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
* data_itab is filled with data that you want in grid
LOOP AT data_itab INTO data_wa.
CLEAR <dyn_wa>.
ASSIGN COMPONENT 'MATERIAL' OF STRUCTURE <dyn_wa> TO <fs>.
<fs> = data_wa-material.
ASSIGN COMPONENT 'QUANTITY' OF STRUCTURE <dyn_wa> TO <fs>.
<fs> = data_wa-quantity.
APPEND <dyn_wa> TO <dyn_table>.
ENDLOOP.
CALL METHOD g_grid->set_table_for_first_display
 EXPORTING
 i_structure_name = '<DYN_TABLE>'
 is_variant = gs_variant
 i_save = 'A'
 i_default = 'X'
 is_layout = gs_layout
 it_toolbar_excluding = gt_exclude
 CHANGING
 it_outtab = <dyn_table>
 it_fieldcatalog = pt_fieldcat[]
 it_sort = gt_sort[].

Approaches to transfer changed data from a table to another table

Hello expert,
will you please show me all approaches to automatically detect and transfer changed data from a table to another table ? I don't need detail information, but a little comment for those approaches are more welcome.
Many Thanks,
Edited by: 843178 on 19-Dec-2011 2:04 PM

You will want to review information on replication and similar methods
In a nutshell:
Replication allowed data to exist at more than one site and take the Master / original table data and clone it at a different site
As tranporting all of the table data to a remote / clone site got more and more expensive we developed a method
to identify just the 'diffs' and only send those from the master to the clone which needed only the diffs to become a clone of the master table
This has many methods and options, but looking under key words such as
- distributed transations
- materialized views
- replication
... are a few categories that will get you started

Change Data Capture How to Tell which you are running Sync or Asyn

Hi ,
I am taking over a new system that has change data capture running, but Im really confused how this is running. Most of the CDC is set up using Sync(triggers), but I have about 5 tables that DO NOT have system generated triggers on them. I know Streams is NOT running/configured. I know Capture is not running/configured (because nothing in DBA_CAPTURE table). I can tell that these 5 tables are still getting updated in the change table schema. I can not figure out how the 5 tables that DO NOT have triggers on them are updating the change data set tables.
I had thought the the 5 tables, must be configured with HOTLOG, but when I look at the CHANGE_SETS table they all (including these 5 tables) are set to CHANGE SOURCE NAME = SYNC SOUCE. I would expected that to be HOTLOG_SOURCE. So I "assume" they aren't set up using Asnc. hot log mode. So maybe the other Async modes are used, but not pushed to another database? Is that possible?
Any other ideas on how to figure out how the CDC is set up for these 5 tables?
thanks for your help.

Thanks for the reply, but I think I must have not stated the problem clearly. I dont WANT to set the source I want to figure out how this CDC is working. I see ALL the sources are currently set to SYNC_SOURCE. Almost all of the tables are set up with system triggers on them, but 5 dont have system triggers, yet the source says SYNC_SOURCE. I did validate that the change tables are getting updated for these tables. my question is how are they getting updated? I "assume" since they dont have system triggers ont eh table they aren't synchoronus cdc (like the other tables are). yet the source says SYNC_SOURCE. What am I missing? How can I tell if the redo log is populating those changes tables? Im pretty sure it is (Becuase there aren't triggers or jobs running), but Im curious if there is a way to tell for sure.
Thanks,

Changing date in BDC

Similar Messages

Maybe you are looking for