Changing default button programmatically

I have a set of 3 buttons on a form, and one is designated as the default button. When it is selected, I would like a different button to become the default, but I can't find a reference to a suitable property in the set_item_property built-in.
The question is simple, "How do I do this?"
TIA,
Mark.

and always all of the button have to be enabled?
otherwise (i had this situation) you can
set all the 3 button as default but only
one enabled and when the user click on the
default button set the other button enabled
and the button pressed disabled
~
speedy

Similar Messages

  • Changing Default Button in Pop-Up Message When Deleting a Song

    When deleting a song from iTunes, a message pops up asking, "Do you want to move the selected songs to the Trash, or keep them in the iTunes Music folder?" The user has the option of selecting Cancel, Keep Files or Move to Trash. Keep Files is highlighted blue and is the default button if one presses Return. Is it possible to make Move to Trash the default button?

    The reason Keep Files is the default button is so you don't accidently trash a file by hitting the return button. I think all of the dialogue boxes in Mac OS are that way– better safe than sorry. However, Its probably possible to change it in either Terminal or accessing the localizable.strings file in the iTune app file.

  • How to change default close maximize and minimize button in mac?

    How can I change default close, maximize and minimize button in mac?

    no. but you can make resizable.

  • How to change default output XMLP report  to rtf/excel !

    I used xmlp 5.6.2
    The default output for report is pdf file.
    Now i want to change default output to rtf or excel file
    Please ! help me !

    Hi Brightsea,
    We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
    Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
    we are getting the following error.
    "The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
    {\rtf1\ansi\deff0"
    ^
    Regards,
    suresh.

  • How to change default to open attachments

    How do I change the default that opens attachments? For me it's Textedit which is fine but for my wife who has her own profile on same computer it's AbiWord for some reason, and it's terrifically slow. I have looked in Help, Missing Manual, etc but no luck, I'm sure I did know the answer at one stage.
    Thanks,
    Michael

    Select one of the affected files then press COMMAND-I to open the Get Info window. In the Open With section select the desired application from the drop down menu, then click on the Change All button. This will cause all similar files to be opened by the selected application.
    An alternative or rather an extension to the above is to download the freeware RCDefaultApp preference pane and install it. It will let you set defaults for just about everything. A very handy bit of software.

  • In mail, my mail is saved as an outlook file by default. I want to change default to mail?

    In mail, my mail is saved as an outlook file, i want it saved as a mail file? Change default, how?

    Thanks, but this is what's happening:
    In Mail, Contacts, Calendarts>Add Account
    Add a MobileMe or Other?
    If I choose MobileMe, it asks for my MobileMe account. If I enter that info, it tells me I already have that account set up, which I do.
    So I clicked the Create Free Apple ID button on the same screen, below.
    This goes to a New Apple ID page
    I enter location and DOB
    This goes to a New Apple ID page
    I enter all of the information as required, then click Done
    I get an error:
    Cannot Create Apple ID
    If you have an @me.com email address, sign in using your MobileMe password
    This takes me back to where I started without a solution.

  • Move/remove/change RSS button from next to refresh sign (Safari 4.0.4)

    How to move/remove/change RSS-button location from next to refresh sign as I'm wasting alot of time everytime when trying to hit that refresh button?
    I know I can use keyboard to refresh a webpage, but I really like the easy to use stop/refresh button a-la Firefox (after combining them) in the left side next to the "previous/next page" buttons, and I really hate that RSS appearing on all those websites which provides RSS. I don't use RSS and I don't want to see it when browsing and using Safari.
    I hope there is a way to doing that, otherwise I have no choice but switching back to Firefox..
    Thanks!

    Thanks Carolyn,
    but the "debug" menu doesn't appear after running "defaults write com.apple.Safari IncludeDebugMenu 1" command in terminal. I have Safari 4.0.4
    But the idea is great: now I only want to disable RSS.

  • Get Info "Change All" button doesn't keep the proper "Open With" app

    I have a small but annoying problem that appears in Leopard 10.5.2 (been there since original 10.5.0 install) that I have tried to troubleshoot but can't solve.
    The problem is:
    -With some of my file types, the wrong "Open With" application is displayed when I view a Get Info for that file type. So to fix this, I open a Get Info window on one of those types of files, and choose the PROPER default application in the "Open With" slot. This works, and then the new proper application name now shows in that slot. So then I click the "Change All" button and apply to all files of that file type. I receive the warning that I will be changing ALL files of that type. I choose "continue" because that is what I desire.
    However, once I do that, (click Change All, then Continue button), the old, wrong application name jumps back the Open With slot! So the new, correct application choice doesn't "stick".
    Oddly enough, it sort of DOES work, because if I then re-click in the Open With slot, although the old, the wrong application is back listed again, if I look up above that name, then my actual desired application is listed in a list, and it has the word (Default) beside it.
    So if I do actually now double click any file of that type, then the proper application DOES launch and open the file.
    But why does the Get Info window still display the wrong, non-default application in Open With? And furthermore, this causes all file types of that kind, to display the WRONG icon in any Finder window. They of course display, the icon of what is in the Open With slot list.
    I am having this problem only with two file types and apps. (Cubase and Pro Tools---DAW audio apps). All of my Cubase files display a Pro Tools icon, and show as Open With: "Pro Tools" when of course it should display Open With: Cubase. As stated in the Open With list, Cubase is indeed there among other programs and it has the word (Default) beside it. So it sort of works when launching files. But I still cannot get Cubase to "stick" and stay in Open With after Change All!
    Can anyone offer any tips on what might cause this and what fix is needed?
    Thanks so much in advance!
    Wade

    Well, I tried rebuilding the Launch services with the command listed but still no luck. After having no luck with that and deleting caches, etc....I also, went to my home (user) directory and in Preferences, I deleted the com.apple.launchservices.plist file. I restarted and checked and still the same result.
    Also, I want to emphasize again that the file type I am discussing DOES actually launch with the correct application. (Cubase files in my example).
    But it is just annoying that ALL of my Cubase files display the Pro Tools application icon, and in Get Info they are listed to open with Pro Tools. But they actually do launch Cubase if double clicked.
    And one other VITAL note....if I open Get Info for one of these files, and change the Open With from Pro Tools to Cubase....then that choice DOES "stick" and retain. (if I "don't" also click Change All)
    It's only when I click "Change All" that it DOESN'T stick and the list selection jumps back to Pro Tools. I hope that may offer some clarity.
    Thanks for the tips but I am still back at square one.
    Wade

  • ? How do you change default for .pdf files from Reader 6 to reader 9

    I cannot change the default for .pdf files from reader 6 to reader 9. Also I cannot remove reader 6. I am running Vista

    Normally, completely removing old versions and reinstalling the latest version will reassociate all applicable extensions for the program, but it appears to have failed in your case.  There may be something else going on with your machine that is producing this behavior.  You probably need to investigate that.  But what you can do to make sure the defaults are correct is click on the start orb and select 'Default Programs.'  Then select 'Associate a file type or protocol with a program.'  From the list of file types, select each of the following in turn: acrobatsecuritysettings, fdf, pdf, pdfxml, pdx, xdp, and xfdf.  If its default program is not Adobe Reader, click on the Change Program button and select Acrobat Reader from the list (you may need to expand the lower section to display more programs than it initially provides).  If Adobe Reader does not show up in the list, you will have to browse for it.  It should be located in C:\Program Files\Adobe\Reader 10\Reader\AcroRd32.exe or C:\Program Files (x86)\Adobe\Reader 10\Reader\AcroRd32.exe.
    This method is safer than manually editing the Root\Classes in the registry.

  • Default button in BOV should always be #1

    I have a number of Tracks with button overlay in a subtitle stream and Button Highlight activated (cyan/yellow marker).
    The buttons are used to change audio stream during playback.
    From a menu with 6 buttons I select a Track:
    Button 1 = Track 1
    Button 2 = Track 2
    and so on.
    What happens when I play the Track(s) is this:
    Track 1 > Button 1 selected
    Track 2 > Button 2 selected
    Track 3 > Button 3 selected
    etc.
    Is it possible to always select button #1 when starting to play a Track, no matter which menu button was used?
    As it is now, the user gets confused, since the Track is setup to play audio stream 1 in a pre-script (and this works fine).
    TIA
    Message was edited by: Niklas Wikman

    Problem solved. Double-click on the subtitle in the Track and set the Default button in the Button tab in the PI.

  • Changing default control values in LV application?

    Can anyone help me?
    Is it possible to change default control values in LV program
    programmatically?
    Sergey Yakovlev, Berlin,
    [email protected]

    Its quite complex (in my opinion) to do so programically , but using a set of invoke nodes, you can get it done ('Make this value default'). Look at the attached for info (its a large link name, so you may have to copy and paste in your browser).
    http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&2C14132F826F839F8625683A000B0B99&cat=DB5863CD70417B07862567930070A058
    I've been simply using config.txt files of read and write to set values.

  • How to set the default button of an ALERT

    Can someone help me how to set the alert propety to change the default button from button1 to button2.Not from the prioperty palette, but inside the code using like set_alert_property.I am using the Oracle Forms 10g.
    Thanks in advance.
    Srini

    To the best of my knowledge, the default button cannot be set at runtime. This must be set at design time in the Builder.
    Refer to the Forms Builder online help for details:
    http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builts/setatpro.html

  • Change default selection of radio buttom

    Hi Experts,i want to enhance standard component in webdynpro.in that i want to change default selection of radio button in 1 view.please help out..
    Thanks & Regards
    Prasad

    Hi durga prasad,
    Radio Button Group By Key will get the values from domain of the data element used in attribute which is binded to Radio Button Group By Key property 'selectedKey' .
    That is why we don't have any code in wd_do_init method.
    So you need to go to the domain and check the domain value of the data element used, and then set the default value of your interest in existing standard program using WDDOINIT---> Post Exit method as said by Naveen and Abhijeet.
    You have to set the attribute binded to Radio Button Group By Key property 'selectedKey' with same domain value you want to set as default.
    The following link will help you to understand how 'Radio Button Group By Key' works.
    Radio Button Group By Key | Team ABAP
    Please reply if any doubt.
    cheers,
    vidyasagar

  • Changing default word processor

    I currently have Think Free Office as my default processsor and would like to have my docs open in Word (which is installed on my mac) Cna't find where to do it. Can anyone help?
    Thanks

    Hi
    Go to icon of file, right-click (Ctrl-click) & select Get info.
    Go down to Open With & expand that.
    You will find a drop down, click on that to choose the Application you want (if your App isn't mentioned, click other & navigate to App you want) & below that a Change All button.
    Click on Change All &, in future, all files of that type will open in your chosen App.
    Steve

  • I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

Maybe you are looking for