Create a schdule to upload an SAP UDQ to the BI on demand integration
Hi Dear;
in SAP B1, BI on demand integration, i can upload any UDQ to the BI On Demand Website
is it possible to schedule a task to upload/update the UDQ ? how?
10x
Hi Jos,
no I want to upload a csv to a cube or ods via web as a self service for our user. We use SEM for data entry but some persons have so many data that they need a way to upload those. Also they don't have a gui so I need a way to upload data via web.
thanks anyway.
best regards
Ralph Leber
Similar Messages
-
How to create a web bulk upload in SAP BW
Hi there,
does anyboady has an idea which is the best way to create a bulk upload via web interface where the user can select a csv file and upload data by himself?
Thanks in advance.
regards,
ralphHi Jos,
no I want to upload a csv to a cube or ods via web as a self service for our user. We use SEM for data entry but some persons have so many data that they need a way to upload those. Also they don't have a gui so I need a way to upload data via web.
thanks anyway.
best regards
Ralph Leber -
SAP EP whit the MS Exchange server Integration Help
Hi Guys,
Need some help, I'm trying to integrate my SAP EP whit the MS Exchange server to view the calendar options but there is not much update help out there, Iu2019m using Connectivity Architecture based on CDO and working whit exchange 2007 and Netweaver 7.0 ehp 1
I get these errors:
When Iu2019m on the collaboration room service at the calendar iview
1. An exception occurred while reading or writing from/to the IIS server
And this one when Iu2019m on the content administration window at collaboration at the calendar review
2. Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:43_01/09/11_0001_6559750
Please Help me whit this, if u have some update guide to do this integration ill be grateful
Regards,
Eli DanielHi,
I am new in SAP EP and the implementation till going on in our company. I follow the below link which is help for me.
Can you please check it..May be it will help you too..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/08def089-0a01-0010-9c82-ee2040b4eced?quicklink=index&overridelayout=true
Regards
Bhuban -
Create a flat-file upload for a BO XAI Inbound Service?
Hello all,
If we don't have a schema defined for a BO XAI Inbound Service, how can we create the XSL and the flat-file upload schema file for it.
Any advice?
Regards,
KerrI don't have problem to create the XSLT mapping.
But because it is to create a flat-file upload for a Business Object XAI Inbound Service, it doesn't have a schema on the server as to the thread Create Schema for Business Object to use for XAI Inbound Service?
And I can't create that flat-file upload without a schema on the server.
Or I can use the BO XAI Inbound Service WSDL instead to create the mapping for the flat-file upload.
Regards,
Kerr -
Creating a Client Bean for an SAP-Webservice
Hi,
I have created a web service for an SAP-Bapi with the web service creation wizard of the SAP-System (EC5).
Now I would like to implement a client bean in the NetWeaver Developement Studio for it.
How can I give input parameters for a testmethod? I have created the following test method and the init method. Now I need to fill the array Bapisdstad[] somehow. How can I do this? I need to create Bapisdstad-elements, but I don't know how to do this?
Thank you!
Julia
public Z_SalesorderGetStatus port;
Business Method.
public String testCustomerId(int Id) {
// TODO : Implement
try{
Bapisdstat[] bapis = new Bapisdstat[1];
this.port.salesorderGetstatus("hallo",bapis);
String b=" ";
return "hallo"+b;
catch(Throwable e){
return "Fehler"+e;
Create Method.
public void ejbCreate() throws CreateException {
try{
// TODO : Implement
InitialContext ic = new InitialContext();
Z_SalesorderGetStatusService s = (Z_SalesorderGetStatusService)ic.lookup ("java:comp/env/Salesorder1Proxy");
Z_SalesorderGetStatus vi = (Z_SalesorderGetStatus)s.getLogicalPort(Z_SalesorderGetStatus.class);
this.port = vi;
catch(Throwable e)Hi Maksim,
thank you for your answer.
When I insert something like:
bapis[0] = new Bapisdstat();
bapis[0].setMaterial("wood");
I get the following mistake:
java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. Property [DocNumber] of class [com.sap.proxies.types.p1.Bapisdstat] must exist and can not be null. This is required by schema description
Is something wrong with my coding or do I have to do something else? Is there any documentation about this?
Best regards,
Julia -
I would like to be able to edit forms that were previously created in Acrobat after uploading them to FormsCentral in the same way that I can edit a form which was created directly in forms central. Is this possible?
No, all LCD forms can only be edited in LCD.
And the second trial is probably not going to work, unless you install it
on a different computer.
The best way to salvage your form, in my experience, is to print it to the
Adobe PDF printer, creating a new flat PDF file and then running the Form
Detection Wizard in Acrobat on it and continuing from there. It probably
won't do a perfect job, but it should recognize some of the fields.
On Wed, Feb 4, 2015 at 11:00 PM, Adobe Forums <[email protected]> -
Create a table and upload data in MS ACCESS from SAP ABAP programming?
Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields. -
I need the Log Report for the Data which i am uploading from SAP R/3.
Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nileshHi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob -
Issue in creating standard text while uploading .ITF file
Hi all,
I have created a shipping label using BARONE software . Barone software create .ITF which is then loaded into the standard text and finally called into the SAP SCRIPT to print the label..
The issue is that the lines of code generated in standard text is 16667. So while saving it says that it cannot save more than 15000 lines . Thus the standard text is not created.
Can anyone tell how to handle this standard text which has more than 15000 lines .
Thanks and Regards,
Syedhi,
Make sure you save your TIFF file in Packbits compressed format and in
SE78 when uploading make sure you have the compression option ticked -
Data Upload into SAP from Microsoft Excel
Hi Guys: I created a function module from a BDC program and made it RFC enabled. When I execute this in SAP, it works fine and creates a customer. But when I try to trigger it from Excel, it gives me the error Object Variable or With Block Variable not set. Please HELP!...
Here is my VB code
Option Explicit
' Declaration for the necessary objects
Dim objBAPICortrol, objConnection, objCreateCustomer, objAcctGr, objCoCode, objReturn As Object
Dim objSalesOrg, objDistCh, objDiv, objName, objStreet, objPostalCode, objCity, objRegion, objCountry As Object
Dim objCountycode, objCityCode, objReconAcnt, objPaymentHist, objCustPrPro, objCustStGrp, objIncoTerms, objSDPayTerms, objAcntAssGrp, objTaxClass As Object
Dim vLastRow, vRows As Integer
Private Sub CommandButton2_Click()
' Create an Email in Outlook
Application.Dialogs(xlDialogSendMail).Show
End Sub
Private Sub CommandButton3_Click()
' Getting the last filled Row in Column A
vLastRow = Cells(Rows.Count, "A").End(xlUp).Row
' Setting the necessary variables for R/3 connection
Set objBAPICortrol = CreateObject("SAP.Functions")
Set objConnection = objBAPICortrol.connection
' Establish a connection
If objConnection.Logon(0, False) Then
MsgBox "Connection Established"
End If
On Error Resume Next
' Assign the Parameters
Set objCreateCustomer = objBAPICortrol.Add("Z_RFC_CUSTOMER_CREATE_XLS")
Set objAcctGr = objCreateCustomer.Exports("KTOKD_005")
Set objCoCode = objCreateCustomer.Exports("BUKRS_001")
Set objSalesOrg = objCreateCustomer.Exports("VKORG_002")
Set objDistCh = objCreateCustomer.Exports("VTWEG_003")
Set objDiv = objCreateCustomer.Exports("SPART_004")
Set objName = objCreateCustomer.Exports("NAME1_006")
Set objStreet = objCreateCustomer.Exports("STRAS_007")
'Set objHouseNumber = objCreateCustomer.Exports("House Number")
Set objPostalCode = objCreateCustomer.Exports("PSTLZ_009")
Set objCity = objCreateCustomer.Exports("ORT01_008")
Set objRegion = objCreateCustomer.Exports("REGIO_011")
Set objCountry = objCreateCustomer.Exports("LAND1_010")
Set objCountycode = objCreateCustomer.Exports("COUNC_013")
'Set objPhone = objCreateCustomer.Exports("Phone")
'Set objContact = objCreateCustomer.Exports("Contact")
'Set objFax = objCreateCustomer.Exports("Fax")
'Set objEmail = objCreateCustomer.Exports("Email")
'Set objDirections = objCreateCustomer.Exports("Directions")
Set objCityCode = objCreateCustomer.Exports("CITYC_014")
Set objReconAcnt = objCreateCustomer.Exports("AKONT_015")
Set objPaymentHist = objCreateCustomer.Exports("XZVER_017")
Set objCustPrPro = objCreateCustomer.Exports("KALKS_019")
Set objCustStGrp = objCreateCustomer.Exports("VERSG_020")
Set objIncoTerms = objCreateCustomer.Exports("INCO1_021")
Set objSDPayTerms = objCreateCustomer.Exports("ZTERM_023")
Set objAcntAssGrp = objCreateCustomer.Exports("KTGRD_024")
Set objTaxClass = objCreateCustomer.Exports("TAXKD_01_025")
' Now looping through all values create customer
' The data begin row is set to 2
For vRows = 2 To vLastRow
' Set the Parameter Values
objAcctGr.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 1).Value
objCoCode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 2).Value
objSalesOrg.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 3).Value
objDistCh.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 4).Value
objDiv.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 5).Value
objName.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 6).Value
objStreet.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 7).Value
'objHouseNumber.value = ThisWorkbook.ActiveSheet.Cells(vRows, 8).Value
objPostalCode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 9).Value
objCity.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 10).Value
objRegion.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 11).Value
objCountry.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 12).Value
objCountycode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 13).Value
'objPhone.value = ThisWorkbook.ActiveSheet.Cells(vRows, 14).Value
'objContact.value = ThisWorkbook.ActiveSheet.Cells(vRows, 15).Value
'objFax.value = ThisWorkbook.ActiveSheet.Cells(vRows, 16).Value
'objEmail.value = ThisWorkbook.ActiveSheet.Cells(vRows, 17).Value
'objDirections.value = ThisWorkbook.ActiveSheet.Cells(vRows, 18).Value
objCityCode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 19).Value
objReconAcnt.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 20).Value
objPaymentHist.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 21).Value
objCustPrPro.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 22).Value
objCustStGrp.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 23).Value
objIncoTerms.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 24).Value
objSDPayTerms.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 25).Value
objAcntAssGrp.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 26).Value
objTaxClass.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 27).Value
' Function call
objCreateCustomer.call
' Get return parameters & display in excel
Set objReturn = objCreateCustomer.Imports("RETURN")
ActiveSheet.Cells((vLastRow + vRows), 1) = objReturn.Value("MESSAGE")
' Error handling
If Err Then
MsgBox Err.Description
End If
Next vRows
End SubHello,
Whatz impossible ??
Yes you can export the data from excel to SAP using VBA, but you need to create fome RFC in SAP as well that will handle the data you will send.
1. Create a RFC function in R/3 that will read a file from specific location and perform the respective transaction.
2. Create your excel file with respective file format and call the RFC function in SAP passing the parameters as file name and other required details.
3. SAP coding for RFC will be a single time activity and then onwads you can just create excel file for upload and use VBA code to initiate the RFC call.
Hope this make some sence. Tell me if you have more queries.
Regards,
Vishal
Reward points.. if helpful -
To upload a data into SAP Table with the help of RFC function in BODS
Hi,
Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
but it did not help me.
Thanks,
AbhishekHi Abhishek,
Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
I hope this helps.
Jan. -
What is the meaning of data uploading in SAP system?Which TCode is used and how it is done?
Data Uploading : This is uploadig the master datas like material master,BOM,Routing etc from a legacy system or new created in uploadale format.
Then using the uploading tools like SCAT,LSMW,BDC ETC the datas would be uploaded.
When you first set up SAP landscape the system will not have any datas and configuration it will be a plain box.
So configuration has to be done by the consultants and later all the master datas,static and dyanamic datas etc has to be uploaded to start working on SAP -
Mass Data upload in SAP from 3rd party system
Hi Experts.
Can anyone help me how to do mass data upload in SAP. Actually, when any new joining is done, a form is being filled by employee(joining form), and that data is finally updated in SAP manually using various infotypes. Now, i m planning to make that form available in webpage. The employee will go to the webpage, fill the data , also the HR will fill the required fields, and once the form is complete, the data will get updated in SAP, in resp. infotypes. Like personal details in infotye 2, address in infotype 6, bank details in 9 and so on, in a single shot. Is there any BAPI or something like that, using which this can be achieved.
Thnx
S KumarYou can try BAPI_BANK_CREATE for IT0009, BAPI_ADDRESSEMP_CREATE for IT0006 and BAPI_PERSDATA_CREATE for IT0002. Otherwise, you can also use FM HR_MAINTAIN_MASTERDATA to create any infotype.
Have a look also at the Life and Work Events functionality in SAP Portal (http://help.sap.com/erp2005_ehp_04/helpdata/EN/f6/263359f8c14ef98384ae7a2becd156/frameset.htm) -
Hi Guys,
I am trying to upload an SAP Script from a .txt file which was downloaded previously from another system. That system is no more available for me so this is the only way fro me to access this SAP script.
My query is that every time i try to upload the script i encounter the following message.
SAPscript Export to Dataset / SAPscript Import from Dataset 1
Start SAPscript Transporter RSTXR3TR *******
Transport object FORM ZFIF_F008_DUNNIN is being processed
Language vector used: ED
Original language was set to E
Definition E imported
Language E imported
Language vector does not allow export/import of foreign language I
Object imported and activated
001 warning message(s) appeared during import
Please help me with this. Useful replies will be duly rewardedYes the SAP script i am trying to create has the same name in the text file...
Also the script isnt getting transported.... its says sucessful but i cant find it in SE71.
It says SAP Script is inconsistent with the text file... i cant display nor change it -
Upload data from excel (not the excle file) into SAP
Guys,
how can we upload data from excel sheet into SAP? I mean just the data not the entire file,
I have a requirement where user press a button in excel sheet and the data in the sheet will get uploaded into SAP.
I am sure we have to use BAPI and some VB programming for macros, I will really appriciate if anyone can help how to achive this.
some sample code exampe will help.
Cheers!I think u r writing BDC for Uploading the data from excel flile to sap. for this is the code I am sending u can use then for Uploading data from excel to sap.
DATA: lv_filename TYPE rlgrap-filename.
FIELD-SYMBOLS : <fs>.
DATA : l_intern TYPE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA : l_index TYPE i.
PARAMETERS : startcol TYPE i ,
startrow TYPE i ,
endcol TYPE i ,
endrow TYPE i .
PARAMETERS: p_flnam LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_flnam.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = sy-repid
FIELD_NAME = ' '
IMPORTING
file_name = p_flnam .
MOVE p_flnam TO lv_filename.
Uploading the flat file from the desktop
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = lv_filename
i_begin_col = startcol
i_begin_row = startrow
i_end_col = endcol
i_end_row = endrow
TABLES
intern = l_intern
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT l_intern BY row col.
LOOP AT l_intern.
MOVE l_intern-col TO l_index.
ASSIGN COMPONENT l_index OF STRUCTURE itab TO <fs>.
MOVE l_intern-value TO <fs>.
AT END OF row.
APPEND itab.
CLEAR itab.
ENDAT.
ENDLOOP.
I hope it will help u.
Regards
Nayan
Maybe you are looking for
-
Two line column heading in ALV Report
Hi Experts, My requirement is that I have to create an ALV report with columns having two lines of headings. Like a main heading called Consultants under which 5 to 10 columns of departments(Dept Num, Num of Ppl , Manager etc. ) and then Contractors(
-
My iphone 4 will not ring on texts. It will vibrate but no sound. It works fine on calls. All settings are correct. I have the ringer on and volume turned up, it is not something silly I am missing. When I tap the different ringtones under sounds and
-
Can I upgrade from Creative Suite 3 to Photoshop CS6?
Hello, I have a licence of the full Creative Suite 3 on my PC. Am I able to upgrade the Photoshop part of this suite to Photoshop CS6 only? I don't need the complete package in CS6, so this would be the best way for me. And my second question: Can I
-
Hi All, I am getting an error, when I am sending message from few BPM's to a common Webservice Synchronously. Delivery of the message to the application using connection AFW failed, due to: java.io.IOException: invalid content type for SOAP: TEXT/HTM
-
Best bookkeeping program for small business
Hi am opening up a small business and wondering what the best bookkeeping program would be for on my MB Pro?