Changing fields with radiobuttons

Hi all!
I have a group of radiobuttons in a selection screen and when a radiobutton is chosen I want some output fields on the selection screen to be changed right away. Does anyone know how to solve this?
Thanks
Magnus

Hi ,
Try this code.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-100.
PARAMETERS: rad_locl RADIOBUTTON GROUP main
                                            MODIF ID aa USER-COMMAND abc
                                                            DEFAULT 'X',
            rad_appl RADIOBUTTON GROUP main MODIF ID aa .
SELECTION-SCREEN END OF BLOCK b1 .
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-101.
PARAMETERS: p_lcl TYPE rlgrap-filename MODIF ID bb.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-101.
PARAMETERS: p_appl(150) MODIF ID cc.
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON P_LCL.
MESSAGE I032(ZI) WITH 'TEST'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_lcl.
  CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name  = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = ''
       IMPORTING
            file_name     = p_lcl.
AT SELECTION-SCREEN OUTPUT .
*Selection by local file
  IF rad_locl = 'X'.
    PERFORM deactivate USING 'CC'.
  ELSE.
    PERFORM deactivate USING 'BB'.
  ENDIF  .
*&      Form  deactivate
*       text
*      -->P_0041   text
FORM deactivate USING    value(p_grp).
  LOOP AT SCREEN.
    screen-active = '1'.
    IF screen-group1 = p_grp.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
  ENDLOOP.
Regards,
Raghav

Similar Messages

  • Mass changes of Material Master field with different values

    Hi,
    How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
    Thanks,
    K R Vishnu Kumar

    Hi Kumar.
    I think you have to use LSMW for mass updation for Material Master fields with different values.
    Regards,
    Rahul.

  • I have created a form that contains fields with default text for a user to update/personalize.  Is there a way to style the text so I can quickly identify changes to default text in a field?

    I have created a form that contains fields with default text for a user to update/personalize.  Is there a way to style the text so I can quickly identify changes to default text in a field?

    George - Thanks you so much!  Actually, i'd love for the text color to be red font color.  Could you send me the script for that? And I assume I just copy and paste the script into the field properties (see screenshot)?
    thanks again!
    Seth

  • Change the widht of a field with lingo

    Is it possible to adjust the widht of a field with lingo? Or adjust the length of the field to the text content?
    Thanks.

    Thenks Sean,
    I have two field set to "fixed" for a pop up menu.
    The script for the first field is this:
    property variabileLinea
    on mouseDown
      sprite(me.spriteNum).member = member("MyField1")
    end
    on mouseUp me
      sprite(me.spriteNum).member = member("MyField3")
      member("MyField2").line[1] = member("MyField1").Line[variabileLinea]
    end
    on EnterFrame me
      variabileLinea = _mouse.mouseLine
      member("MyField1").Line[variabileLinea].hilite()
    end
    "MyField1" adjust the lenght of the field to the text content, "MyField2"  after the mouse up no. Any suggestion?
    Thanks.

  • How can I have two fields with the same name if it makes sense?

    Hello, folks :)
    I have a pretty hard time figuring out how I can have two text fields with the same binding name.
    The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
    I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
    How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
    Thanks for your replies :)
    P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
    One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

    I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

  • Field with a default value from another field

    I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
    Topic
    Acrobat 5 - field with default value of another field
    Ben PF - 03:31am Mar 23, 2007 Pacific
    How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
    I've tried, but I just can't figure it out!
    Any help much appreciated.
    Ben
    | Back to Topic List | Bookmark | Subscribe
    To start a NEW discussion click on the Back to Topic List link and select Add Topic.
    If you are in an archive forum please go up to the main topic list (archives are read only).
    Messages
    2 messages. Displaying 1 through 2.
    First Previous Next Last Show All Messages
    Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
    This, or some variation of this, should work:
    if(this.getField("date2").value == ""{
    this.getField("date2").value = this.getField("date1).value;
    | Bookmark back to top
    Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
    Thanks very much.
    I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
    Thanks for your help.
    Ben

    Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
    Put this:
    this.getField("myField2").value = event.target.value;
    Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
    I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

  • How to find out Last Changed Fields for a line item of a PO

    Dear All,
    Pls let me know is there any FM or procedure to find the last changed fields for each line item of a PO. I should be able to get the details on the basis of Last changed Date. Can u pls guide me in this?

    Hello,
    Check the table CDHDR,CDPOS for PO items,
    Check this code:
    REPORT ZV_GET_LATEST_SO .
    DATA: BEGIN OF ITAB OCCURS 0,
            OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
            OBJECTID TYPE CDHDR-OBJECTID,
            CHANGENR TYPE CDHDR-CHANGENR,
            USERNAME TYPE CDHDR-USERNAME,
            UDATE TYPE CDHDR-UDATE,
            UTIME TYPE CDHDR-UTIME,
            TCODE TYPE CDHDR-TCODE,
            TABNAME TYPE CDPOS-TABNAME,
            TABKEY TYPE CDPOS-TABKEY,
            FNAME TYPE CDPOS-FNAME,
            CHNGIND TYPE CDPOS-CHNGIND,
          END OF ITAB.
    TABLES: CDHDR,CDPOS.
    DATA: LT_CDHDR LIKE CDHDR OCCURS 0 WITH HEADER LINE,
    LT_CDPOS LIKE CDPOS OCCURS 0 WITH HEADER LINE.
    *REFRESH AUSG.
    CLEAR CDHDR.
    CLEAR CDPOS.
    CDHDR-OBJECTCLAS = 'EINKBELEG'.
    CDHDR-OBJECTID   = '0000001784'.  " Purchase order number
    **SELECT A~OBJECTCLASS A~OBJECTID A~CHANGENR A~USERNAME A~UDATE A~UNAME
    **B~TCODE
    **B~TABNAME B~TABKEY B~FNAME B~CHNGIND INTO TABLE ITAB FROM CDHDR AS A
    **INNER JOIN CDPOS AS B ON A~OBJECTCLASS = B~OBJECTCLASS
    **                         A~OBJECTID    = B~OBJECTID
    **                         A~CHANGENR    = B~CHANGENR
    **                    WHERE OBJECTCLAS = 'VERKBELEG'
    **                      AND OBJECTID = '0000001784'.
    *SELECT * FROM CDPOS INTO TABLE LT_CDPOS WHERE OBJECTCLAS = 'VERKBELEG'
    *                                    AND OBJECTID = '0000001784'.
    *IF NOT LT_CDPOS[] IS INITIAL.
    *  SELECT *
    *  INTO   TABLE LT_CDHDR
    *  FROM   CDHDR
    *  FOR    ALL ENTRIES IN LT_CDPOS
    *  WHERE  OBJECTCLAS = LT_CDPOS-OBJECTCLAS
    *  AND    OBJECTID = LT_CDPOS-OBJECTID
    *  AND    CHANGENR = LT_CDPOS-CHANGENR.
    *ENDIF.
    **  SORT ITAB BY OBJECTCLAS ODJECTID DESCENDING.
    *LOOP AT ITAB.
    *  WRITE: ITAB-UDATE."ITAB-UNAME.
    *ENDLOOP.
    *--- Interne Tabellen -------------------------------------------------
    DATA: BEGIN OF ICDSHW OCCURS 50.       "Ausgabeaufbereitung
            INCLUDE STRUCTURE CDSHW.       "Zwischendatei
    DATA: END OF ICDSHW.
    CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
         EXPORTING
              DATE_OF_CHANGE    = CDHDR-UDATE
              OBJECTCLASS       = CDHDR-OBJECTCLAS
              OBJECTID          = CDHDR-OBJECTID
              TIME_OF_CHANGE    = CDHDR-UTIME
              USERNAME          = CDHDR-USERNAME
         TABLES
              I_CDHDR           = LT_CDHDR
         EXCEPTIONS
              NO_POSITION_FOUND = 1
              OTHERS            = 2.
    LOOP AT LT_CDHDR.
      CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
        EXPORTING
    *   ARCHIVE_HANDLE                = 0
          CHANGENUMBER                  = LT_CDHDR-CHANGENR
    *   TABLEKEY                      = '00000000 '
    *   TABLENAME                     = ' '
    * IMPORTING
    *   HEADER                        =
       TABLES
         EDITPOS                       = ICDSHW
    *   EDITPOS_WITH_HEADER           =
    * EXCEPTIONS
    *   NO_POSITION_FOUND             = 1
    *   WRONG_ACCESS_TO_ARCHIVE       = 2
    *   OTHERS                        = 3
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      LOOP AT ICDSHW.
        IF ICDSHW-TABKEY+3(10) = '0000001784'
           AND ICDSHW-TABKEY+13(6) = '000001'.
        ENDIF.
      ENDLOOP.
    ENDLOOP.
    Vasanth

  • How to change field VBAK-CMNUP using VA02

    Hi EXPERTS,
    How to change field VBAK-CMNUP (Date of next credit check of document) using VA02?
    Seems it is hard to find it on the screen of VA02.
    Thanks in advance.

    Hi,
    Check these notes:
    Note 635727 - VBAK is filled with date only if block is set
    Note 588649 - Next date (CMNGV) - meaning and function
    Regards,
    Eduardo
    PD: I forgot the Note 588649 - Next date (CMNGV) - meaning and function.
    Edited by: Eduardo Hinojosa on Jun 11, 2009 11:39 AM

  • Adding fields with data type "TIMS" to the BP transaction

    hi all,
      This  is Anil regarding the addition of fields to the BP transaction.
    here my problem is for BP transaction I could not find any BADI or screen exit  to add the fields. Even EEWB tool does not allow us to cretate the fields with data type "TIMS". so could you please suggest any other way to add these fields to BP?
    when I enter the values to the time fields in BP transaction, they must reflect in
    BUT000 table also?
    Regards,
    Anil .

    In the physical layer, Column Properties change the data type to int.
    If still problem exists, In the Business Model, write a case statement like
    case when column1=1 then 1 end
    and apply count aggregation on the new calculated column,add the column to presentation table, use that new calculated column for report.
    - Madan

  • Views in MM03, how can I add fields and changes fields labels

    Hi !!
      I need to change some labels that appear on Sales: Sales Org  2 (view on MM03, MM02..MM01)...
       Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
       example: when I enter on MM03..I select differents views(including Sales: Sales Org  2), later I specify  sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org  2).
      When I access in tab: Sales: Sales Org  2, I can see one Group that it's called
    Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example:  Material Group 1 (MVKE.MVGR1 )... I would like to know :
    1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
    2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
      I will appreciate your help!!! 
      I will give you points for your answer
    Alice

    Hi Alice,
    And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
    If I need to add some values???
    After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well.  Give it try.
    And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
    I do not understand your questions. Can you elaborate more?
    Regards,
    Ferry Lianto

  • Changing fields color in CL_GUI_ALV_GRID using class

    Hi,
    I've written a lot of posts but still I have problem with changing color for CL_GUI_ALV_GRID.
    I have class ZKSL_CL_4_17_ALV_GRID_OO with 3 methods : SELECT, HANDLE_DBL_CLICK AND DISPLAY_ALV
    I want to change fields color every time I double click on IT.
    METHOD SELECT.
       DATA:
             lt_sflight                TYPE TABLE OF           zkslt_sflight,
             ls_layout                 TYPE                    lvc_s_layo,
             lr_custom_container       TYPE REF TO             cl_gui_custom_container,
             lr_my_class               TYPE REF TO             zksl_cl_4_17_alv_grid_oo.
       SELECT *  FROM zkslt_sflight  INTO TABLE mt_sflight
          WHERE carrid    = iv_carrid AND
              ( fldate    IN it_date  OR
                price     IN it_price OR
                planetype IN it_type )
    CALL FUNCTION 'Z_KSL_SCREEN'.
    ENDMETHOD.
    from FM z_ksl_screen i call screen 400 and from status_400 output  I call method DISPLAY_ALV
    METHOD display_alv.
       DATA:
              lr_custom_container       TYPE REF TO             cl_gui_custom_container,
              lt_sflight                TYPE TABLE OF           zkslt_sflight,
              lt_catalog                TYPE STANDARD TABLE OF  lvc_s_fcat,
              ls_catalog                LIKE LINE OF            lt_catalog,
              ls_layout                 type                    slis_layout_alv,
              lr_my_class               TYPE REF TO             zksl_cl_4_17_alv_grid_oo.
       CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
         EXPORTING
           i_structure_name = 'ZKSLT_SFLIGHT'
         CHANGING
           ct_fieldcat      = lt_catalog[].
    ************BULID LAYOUT
       ls_layout-no_input = 'X'.
       ls_layout-colwidth_optimize = 'X'.
       ls_layout-totals_text       = 'Totals(201)'.
       ls_layout-info_fieldname    = 'LINE_COLOR'.
       IF mr_gui_alv_grid IS INITIAL.  "-----------------------------------if----------------------&
         CREATE OBJECT: lr_custom_container
           EXPORTING
             container_name = 'DISPLAY',
             lr_my_class.
         CREATE OBJECT mr_gui_alv_grid
           EXPORTING
             i_parent = lr_custom_container.
         SET HANDLER lr_my_class->handle_dbl_click FOR mr_gui_alv_grid.
         CALL METHOD mr_gui_alv_grid->set_table_for_first_display
           EXPORTING
             i_structure_name = 'ZKSLT_SFLIGHT'
            is_layout        =   ls_layout
             i_save           = 'A'
           CHANGING
             it_outtab        = Mt_sflight
             it_fieldcatalog  = lt_catalog.
       ELSE.     "-------------------------------------------------ELSE---------------------&
         mr_gui_alv_grid->refresh_table_display( ) .
       ENDIF.
    ENDMETHOD.
    In handler i am trying to change fields color and call method display sending new out_table
    CALL METHOD me->display_alv
         CHANGING
           ct_fieldcat = lt_fieldcat.
    Please give me some easy advice how to do that.
    thank you in advice.

    Thank you Klaus for your reply,
    The problem is that I need to make this using classes.
    I tried to make my structure data with LVC_T_SCOL as you wrote,
    a field of table type LVC_T_SCOL in the structure of your output table
    DATA BEGIN OF lt_data. 
           INCLUDE STRUCTURE sflight.
           DATA cellcolors  TYPE lvc_t_scol .
       DATA END OF lt_data.
    TYPES: BEGIN OF mtt_tab.
    *         INCLUDE STRUCTURE ZKLST_sflight.  " I get error that I cannot use ref to abap dic
               INCLUDE TYPE ZKSLT_SFLIGHT.
               TYPES: cellcolors  TYPE lvc_t_scol ,
                 END OF mtt_tab.
    After making type mtt_tab
    i declare data   lt_tab                    TYPE STANDARD TABLE OF  mtt_tab.
    and when I try to copy table mt_sflight (it is atribut of calss) like below
    LOOP AT mt_sflight INTO ls_mt .
    *   READ TABLE lt_tab INDEX sy-tabix ASSIGNING <ls_tab>.
    *   MOVE-CORRESPONDING <ls_mt> TO <ls_tab>.
    *    UPDATE lt_tab FROM TABLE mt_sflight.
         MOVE-CORRESPONDING ls_mt to lt_tab.
       ENDLOOP.
    I am getting error "lt_tab is not internal str or table with header"
    Can you help me with this? 

  • The report in FI which contains Quantity field with every line item

    Hi Gurus,
    What are the reports in Finance which contains Qty field with every Line Item reports & reports that contains user name & System Id in it along with other informations e.g. G/L, Ar, AP
    Thanks & Regds,
    Santosh Rothe

    Hi
    Using the line item display report you can get the required details by changing layout in the output:
    FBL1N: Vendor line item
    FBL3N: G/L line item
    FBL5N: Customer line item
    VVR

  • ? using multiple approval signatures, each locking the fields with collections

    Having fun with LiveCycle to make a "signoff" sheet that will allow a customer to request a "new product" with a PDF form. Once that information is added to our EDR (Eng Design Request) form, I want the form to be forwarded to multiple departments, where each department manager adds their name, date, comments, and then signs the document and forwards it to the next manager. I have it set up with "locking" a "collection fields" with each signature, and that is cool to lock their comments to thier signature, such that someone else can't change their comments without first "clearing" their signature field... just what I wanted, cool,, taking it a step further, I wanted to have the original product data protected such that once signed by one, or more managers (Eng, Sales, President), that the data was locked unless all signatures were cleared. I tried this first by including the product definition fields in every signature's "collection of fields" (set to lock after signing). Thought that would be the ticket, pretty pumped to try it, but once I clear one signature, example the "Eng manager signature" I can go in and mess with the specs and then re-sign the document, and the other signatures are still there, thought I have to clear them, not good,,, 2nd try, I then tried to lock the preceeding "signature field" itself with the next signature (added "sig0" to "sig1" collection) and that worked once, but fell apart on the third approval, as clear one signature openned things right up, when it shouldn't have. Anyway, has anyone found a way to have an approval signoff sheet where once signed the data fields are locked unless all the signature(s) are cleared. I think the programming is not handing multiple locks on the sme field properly, ie all locks on that field must be removed for that field to become editable,, There may be a better way to tackle this..
    PS, I have really learned to be cautious when saving the form out of LiveCyle, then renaming it and save out or "Pro" with read permisions enabled, then see if "Reader" can open it,,, if U R not carefull you get and error that the "document has changed and reader can't save, contact the author,,," that was scary as I had to surf through lots of old revs to find one that would work again, something salvagable without going back to MSWord,,,
    Thanks for your help...

    I think I found a way to get it to do what I want,,,
    1) Use the first signature collection lock to lock only the fields that that person is signing-off on.
    2) The next manager then signs off and locks only his comments and text boxes, as well as the signature of the preceeding manager. This way text fields are only locked by one signature collection and thus to edit anything you have to clear that manager's signature to edit the related text boxes, then to re-sign that section you must clear the other (higher level) signatures to open up the signature field for resigning,,, I think this is providing the protection I want,,, Yea,,, let's get this form back into our stupid ISO system ;)

  • The field "GLTPC" is unknown, but there is a field with the similar name*

    Hi all
    When i am running the report painter reports in SAP
    i am getting this error .
    Syntax error in program    SAPFGRWG
    in include                  FGRWGE60
    in line                      19
    Last changed by            SAP
    Author                     SAP
    The field "GLTPC" is unknown, but there is a field with the similar name
    "GLTPC".*
    Please help me whenever
    Regards,
    suchithra
    Edited by: Rob Burbank on May 22, 2009 9:00 AM

    Hi All
    All 8A group Report painter reports i.e GLPCt table Reports are not executed properly
    Can you please help me out
    Regards,
    suchithra

  • How do I delete a field that's Tab 0 or change field order?

    I created a fillable form in Acrobat 10 Pro. Some of the fields became Tab 0 and they don't show up when viewing tab order, and also those fields can't be changed or deleted.  The fields were originally set up as distinct data entry fields with specific names.  I don't know how they changed from their original field properties (i.e., state, zip code, etc.).  When I opened the document to continue my set-up the tab 0 fields which had previous taken on the field name Start Work were now titled Middle Name/Initial, yet another field in use that works properly.
    I've already done all the reinstall/repair and PC based troubleshooting/malware removal but these issues persist. 
    Any help in diagnosing what happened and how I can remedy this strange occurrence would be much appreciated.

    I like the redaction tool idea as a workaround.  That will make life a good deal easier so I can do the more permanent fix when I have more time on my hands.  Thanks GIlad.
    Anne
    Update - Good news is once those fields are minimized and moved off the visible page, they disappear.  Unfortunately redaction doesn't work as the only way to view those fields was when in form editing mode.  Also couldn't remove hidden information as those fields don't show up in the field list, either.  For now they are just sitting as tiny spots in a corner on each page where they existed.  And the finished product looks and works as it should. . . .

Maybe you are looking for