Changing InfoObject to allow lowercase letters

Hi All,
We have Invoice Number InfoObject which was already developed and used in some of the DSO in production. This infoobject was not checked with the lower case letters option in the object properties while creating the object. From two days we are getting an SID creation error while activating DSO's due to the master data being in lower case letters. There is already transaction data which is available in the DSO's. The infoobject is allowing the lower case to be checked in development. Now if we change the object to incorporate the object to allow lower case letters, what could be the effect while sending it to production. Will there be any problem for the DSO's being inactive in production if we send the object to production with the change in infoobject properties. Is it the best option to change the object to allow lower case letters or is it best option to write a transformation routine to make lower case to upper case in between the DSO layer to allow lower case.
Regards
Vijay

Hi,
You can transport it and after that it will accept both the small letters as well as capital letters.
But will have effect on the input variables create on this infoobject.
You will have to take care of correct syntax like combination of small and caps characters in the values or it will not accept the user input.
If you do not check this option then...in the query during input in selection on a variable based on this infoobject you can give input in any case... small or capital...and system will not check the case of the object by default everything will be capital...but once settings are changed then it will mandatory to give user input in correct case or the system will keep an values not found error.
Generally its better to write a routine if its going to be used as an input variable.
But if its a simple text which will not be used for input variable then you can use it this checkbox.
Thanks
Ajeet

Similar Messages

'Lowercase letters' setting for Shared infoObjects

Hi Experts,
As you all know, the following properties are shared across Environments and are reused infoObjects.
/CPMB/ACCTYPE
/CPMB/CALC
/CPMB/RATETYP
/CPMB/YEAR
/CPMB/CURR
/CPMB/ENTITY
/CPMB/REPORT
/CPMB/FLOWTYP
/CPMB/TILEVEL
/CPMB/PERIOD
They are used for referential integrity between BPC dimensions.
E.G. The ENTITY dimension has property CURRENCY (/CPMB/CURR) which should contain an existing member of the Currency dimension.
In BW, shouldn't the 'Lowercase letters' setting always be flagged for these shared infoObjects? (Like it is flagged for each BPC dimension!)
As at my current client, this is not the case... They migrated from BPC 7.5 to 10.0 NW. The shared InfoObjects have an empty tickbox for Lowercase letters. I wonder if this setting should be part the Upgrade process?
Anyone that has experienced the same?

So, because dimension ID's can be entered with upper & lowercase, shouldn't shared infoobjects that reference members (like a foreign key) allow lowercase as well and thus have this tickbox checked?
Because now I see validation failing when trying to populate the ENTITY property in INTCO dimension even when it's entered in the same case as the ID of the ENTITY dimension.
Would reactivating environmentshell fix the settings of all shared objects under /CPMB/IOBJGEN ?
p.s. Yes Gersh, I see in changed version the tickbox correctly ticked. So something must have changed it... maybe during some transports.

AUR Submition: only lowercase letters are allowed.

I'm getting this error when trying to submit a src tarball:
Submit
Invalid name: only lowercase letters are allowed.
pkgname() is all lower-case, so I'm not sure why it's complaining....?
Here's the PKGBUILD:
# Maintainer: Phillip Smith <[email protected]>
pkgname=('kernel26-fedora-pae' 'kernel26-fedora-devel-pae')
pkgbase="kernel26-fedora-pae"
pkgver=2.6.31
_FEDORA_RELEASE=40.fc12
pkgrel=1
url="http://www.kernel.org/"
pkgdesc="The Linux Kernel and modules, compiled by Fedora. PAE supported. (Memory >= 4GB)"
arch=('i686' 'x86_64')
license=('GPL2')
depends=('coreutils' 'module-init-tools' 'mkinitcpio>=0.5.15')
makedepends=('rpmextract')
backup=('etc/mkinitcpio.d/kernel26.preset')
provides=("kernel26=$pkgver" "kernel26-fedora-pae=$pkgver")
conflicts=('kernel24' 'kernel24-scsi' 'kernel26-scsi' 'kernel26' 'kernel26-fedora')
# We need to force the upgrade because the previous maintainer
# used the Fedora release number as the pkgrel number so we could
# never have more than one release of each PKGBUILD!
options=(force)
install="kernel26-fedora.install"
source=("http://kojipkgs.fedoraproject.org/packages/kernel/${pkgver}/${_FEDORA_RELEASE}/${CARCH}/kernel-PAE-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm"
"http://kojipkgs.fedoraproject.org/packages/kernel/${pkgver}/${_FEDORA_RELEASE}/${CARCH}/kernel-PAE-devel-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm"
"kernel26-fedora.preset")
md5sums=('cfc0310d8afbfdc42074029a2d6ae565'
'2ade9257df9eaccff5a4ad8fbbbd0c7c'
'c8f559ad29f3bce277ed054d85878c40')
build() {
msg "Nothing to compile for $pkgname"
package_kernel26-fedora-pae() {
cd $pkgdir
rpmextract.sh $srcdir/kernel-PAE-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm
rm -rf $pkgdir/etc/ld.so.conf.d || return 1
rm -rf $pkgdir/usr || return 1
msg "Generating kernel26-fedora.kver..."
_kernver=${pkgver}-${_FEDORA_RELEASE}.${CARCH}.PAE
mkdir -p $pkgdir/etc/mkinitcpio.d/kernel26-fedora.kver <<EOT
cat > $pkgdir/etc/mkinitcpio.d/kernel26-fedora.kver <<EOT
# DO NOT EDIT THIS FILE
ALL_kver='$_kernver'"
EOT
# Install mkinitcpio files
install -D -m644 $srcdir/kernel26-fedora.preset $pkgdir/etc/mkinitcpio.d/kernel26-fedora.preset || return 1
package_kernel26-fedora-devel-pae() {
replaces=('kernel-devel-pae')
cd $pkgdir
rpmextract.sh $srcdir/kernel-PAE-devel-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm
# vim:set ts=2 sw=2 et:

Oh... I thought I had other split packages in there. Obviously not!
And I see there's already a feature request for it... Cool. I'll split the package back into individual PKGBUILD's for now
http://bugs.archlinux.org/index.php?do= … k_id=16394

TS1398 My wireless password in only 6 lowercase letters, but my iPod touch requires me to enter 8 before allowing me to join. Therefore it will not let me log on to the wireless network, any solutions?

My wireless password in only 6 lowercase letters, but my iPod touch requires me to enter 8 before allowing me to join. Therefore it will not let me log on to the wireless network, any solutions?

What encryption are you using on the router?
If WEP you have to set the router to use the first key and you have to enter the first key as the password on the iPod. See:
iOS: Recommended settings for Wi-Fi routers and access points

Lowercase letters allowed / not allowed

Hi All,
In the Characteristic InfoObjcet Maintaince:
From SAP HELP:
Lowercase letters allowed / not allowed
1)If this indicator is set, the system differentiates between lowercase letters and capital letters when you use a screen template to input values. If this indicator is not set, the system converts all the letters into capital letters when you use a screen template to input values.
2)If you choose to allow the use of lowercase letters, you must be aware of what happens when you input variables:
If you want to use the characteristic in variables, the system is only able to find the values for the characteristic if the lowercase letters and the capital letters are typed in accurately on the input screen for variables. If, on the other hand, you do not allow the use of lowercase letters, any characters that you type onto the input screen, are converted automatically into capital letters
Both points are not clear to me.
Can Anybody expalin me in detail with an example?whats screen template?...etc
regards
murali.
Message was edited by: cmd

Hi cmd,
The "Screen template" here refers to the selection screen when running a BW report.
The other details are self-explainatory I suppose.
Bye
Dinesh

I purchased an IPAD2 for my special needs daughter. She only currently understands lowercase letters only and gets confused with the uppercase letters. Is there a way to change the keyboard to display lowercase letters?

I purchased an IPAD2 for my special needs daughter. She only currently understands lowercase letters only and gets confused with the uppercase letters. Is there a way to change the keyboard to display lowercase letters?

There is no way for the keyboard itself to display only lower case letters. It doesn't display lower case letters at all for that matter.
When you are using the keyboard - The other issue that you will have is with the shift key. Even with auto caps turned off you can still type capital letters if you tap the shift key and if you double tap it by mistake - it will turn into all capital letters so also turn off Caps Lock in the keyboard settings.
Other than that, there is no way to ensure that you can type in lower case.
Maybe an external bluetooth keyboard would be a better solution but I don't use one, and I have never even seen one in person so someone else will have to verify that for you.

Issue with lowercase letters

Hi,
The PC: DS1_SBCGST008_ZOHM_O08 is getting failed in the BW side daily due to lower case letters issue for the follwing fields:OI_BASELO the infoobjects is:0OI_BASELO.
For the above fields data is getting from this table: MSEG.
Error:-Value 'GTL Duisburg ' (hex. '00470054004C002000440075006900730062007500720067 ') of characteristic 0OI_BASELO contains invalid c.
In R/3 side the field OI_BASELO (Base location) has entered GTL Duisburg but when we load the data into Bw its not allowed b'coz of lowercase letters which we have in R/3 for the above field OI_BASELO.
Please hightlight the solution for the above issue As we need to fix immediately.
Regards,
Sudhan Reddy

Hi Sudhan,
You can either change your lower case letter to upper case during load (with help of routine) or use the checkbox for lower case letter in characteristic maintenence screen.
http://help.sap.com/saphelp_nw04/helpdata/en/b7/f470375fbf307ee10000009b38f8cf/frameset.htm
Check these posts:
ALL_CAPITAL
ALL_CAPITAL String in RSKC
lowercase letters
Hope it helps,
Regards,
Ashish

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

How can I always change the color of certain letters?

I know that sounds weird. But hear me out.
I was reading an article about synaesthesia, and it seems that reading with certain letters always displaying in a certain color can do interesting things.
I'm not trying to do anything too crazy, just a little experiment on myself.
So I'm wondering if anybody knows how I may change the color of certain letters on my Mac? I realize that'll make some interfaces look screwy, and in some instances it may not be possible - but is there a way?
Thanks!

Kliegs wrote:
I've never heard of anything like this, so I'm just curious if it exists.
You and me both, let's wait and see what other say. My guess would be that modifications of that type aren't possible w/o some serious "modifications" i.e. hacks, if even via that method, specifically regarding the operating system.

Remote content bar does not appear for some emails with images specifically daily Twitter updates. Changing options to allow all remote content has no effect

The broken image symbol appears in place of the images but associated web links do work ok.
Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
Any help appreciated.

You only need to post a URL to your web site. We can see your code in Browser.
So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Hey there just wanna ask if how am i suppose to change my monthly allowance for purchasing because cant purchase anymore on apple cheers

hey there just wanna ask if how am i suppose to change my monthly allowance for purchasing because i definitely exceeded the monthly allowance cheers

JH_Park,
Good afternoon!
I definitely understand any disappoint you may be feeling from this situation. Verizon Wireless do not have any such policy regarding a limit of replacements we issue, the warranty is not ours but rather the manufacturer and I apologize for any confusion. I would like to review your account and the concerns you are having with this device. Please send me a direct message for further assistance.
Thank you!
AdamE_VZW
Follow us on Twitter

How do I change all caps to lowercase on Pages 08?

How do I change all caps to lowercase on Pages 08? Help says to use 'Lower' but I can't find it on the program.

If you have Pages '08, then you also have Numbers '08, which supports the LOWER() function.
Copy/paste your text into column B of a Numbers table, starting at B2
In cell C2, enter the formula =LOWER(B2).
Fill down to the last row containing text in column B.
Select the cells of converted text in column C. Copy
Go back to your Pages document and go Edit > Paste Values.
Unlike the Pages menu item (in the Format menu), which formats the text to display as lower case, the LOWER() Function does an actual conversion. The function works only in a table. It is probably supported in Pages tables as well as in tables in Numbers, but I haven't checked that.
Regards,
Barry

How can i change my notes from lowercase to uppercase in the inbuilt ipad notes app?, how can i change my notes from lowercase to uppercase in the inbuilt ipad notes app?

how can i change my notes from lowercase to uppercase in the inbuilt ipad notes app?, how can i change my notes from lowercase to uppercase in the inbuilt ipad notes app?

once they are written you can't but on a new note while your typing you can turn on CAPS LOCKS

IPod Touch ...unable to type lowercase letters....

I just got an iPOD touch from my wife for Christmas, and I'm not able to log on to the net. I have a wireless network at home (router, laptop etc.) and try to connect to that through the Safari. However, as I'm asked for the password on my Wi-Fi network I'm not able to type lowercase letters. I have tried to tap the shift button both once twice and more...it doesn't help..I'm not getting any lowercase letters. Have tried to switch off the activating of the Caps Lock at settings...feel like an idiot and I'm getting frustrated. Anybody out there with a tip or even the solution..? Please....S?

Hello and Welcome to Apple Discussions.
Are you sure that you're not getting lower case? The keyboard always shows upper case but only types it when the 'shift' key glows white. If the shift key is an outline then it should type lower case.
If you are still having issues download and restore the latest +iPod touch+ software:
http://docs.info.apple.com/article.html?artnum=305744
Merry Christmas
mrtotes

My Elements 13 just updated about 2 weeks ago and all of my fonts are now all capital letters and I cannot get lowercase letters, help

My Elements 13 just updated about 2 weeks ago and all of my fonts are now all capital letters and I cannot get lowercase letters, help

Hi JenRR,
Please try resetting your tools from Tool options.
Open Tool options in PSE status bar. Click on flyout menu and click on Reset All Tools.
Let me know if this solves the issue.
Thanks,
Nikita

Changing InfoObject to allow lowercase letters

Similar Messages

Maybe you are looking for