Changing Middle Tier Hostname

Metalink Note 260571.1 documents how to change the hostname of a middle tier. Are there any consequences for the BPEL option which is installed on a J2EE and WebCache middle tier? Is changing the hostname of a BPEL Server supported?

1. Yes you are on the right track.
2. You can confirm by going to AS Control Console for Midtier; click on Infrastructure link, among the top left links; and see which OID it points to.
3. you seem to be having it all.
AMN

Similar Messages

Change middle-tier IP/Host

I've just installed middle-tier version 10.1.4. My computer have have 2 network interface: one is *192.168.1.2*(LAN address) and the other is *172.16.64.2*(VPN address). I want people on VPN can access to portal builder page via address *172.16.64.2*. However, the entire links of this page are point to the LAN address(i.e 192.168.1.2).
Is there any solution to change from LAN addr to VPN addr? or can we change such that it will point to a domain name instead of a specific ip address.
I've tried this manual but no luck
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/host.htm#CIHHDFBF

You can set up a virtual host entry for the VPN address. Pending on which URL your end users would use, they would either access the Portal through the LAN interface or through the VPN interface, pending your network topology. Setup of a virtual host is documented in the [url http://download.oracle.com/docs/cd/B14099_19/portal.1014/b19305/cg_advnc.htm#sthref363]Portal Administrators Guide.
A few points to make about this however :
<li>I would imagine there are easier solutions. You can resolve the Portal URL to either 192.168.1.2 or 172.16.64.2 pending on which network your client would be connected. I am no DNS expert but this should be doable.
<li>I would not use my Portal server as gateway for both LAN and VPN access. If you would use a dedicated server for this, you could have your Portal running on a single LAN address. This would surely make it easier to administrate your Portal
<li>You have installed Portal 10.1.4 recently. This version will be desupported by Oracle on December 31st, 2011. Do you still want to go live with a version which is about to be desupported?
Thanks,
EJ

Changing the port number in 10g Discoverer- Middle Tier & Infrasctructural

Earlier I had insalled 10g discoverer which incudes both Middle Tier & Infrastructural Tier with default port numbers.
Now i would like to change the default port numbers to other port numbers. This is because , i am got to do another discoverer installation with default port numers.
In this case i have one question. Is it required to change all the port numbers that exist in the file "portlist.ini" of both Middle Tier & Infrastructural Tier.
What change still i need to do in Oracle 11i application front.
Thanks
Naveen

I did troubleshooting to verify the group, but this just changed the port number back to the default in the listener.ora & tnsnames.ora.
So I did all the steps again to change the port number from the default to another - via lsnrctl status, i see that the new port number is being used, I can also log in to the database via Toad using the new port number, in v$parameter i see that the local_listener is registered on the new port number....only under the Fail Safe manager, the port number (under listener parameter) has not changed....it still shows the default port number. Anyone know how to change this???

How to change the nodes in middle tier

how to chnage the node in middle tier and a new node for middle tier?

For adding a new node to an existing system, you can use Rapid Clone to clone a node and add it to the existing Application System. Refer to the following note for more details:
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1

Renaming the OEM middle tier server name

Hi,
I have been asked about renaming the OEM middle tier server. If I do this, what things will I need to change on the managed servers to allow the agent on these servers to contact the newly named server? Are there also database changes to make in the OMS?
Thanks.
Ron Reidy

I don't think you can with 10g grid control, the hostname gets buried into too many files. I may well be wrong but I can't anything in the docs or on metalink.
Bazza

Oracle forms 10g (win Xp middle tier IE 8 Win 7- IE 8 client)

forms services 10.1.2.0.2
Database 11gR2 also on Win Xp pro SP3
Hi
I have a problem with java and Jinitiator and my understanding of what is / should be happening.
In the file forms/server/formsweb.cfg see below. I can alter the parameter
baseHTMLjinitiator=basejini.htm
###baseHTMLjinitiator=basejpi.htm
between the two alternatives. As it stands as shown the IE8 on the middle tier and on the database PC both work as near correctly as i can tell. On the Win 7 client IE 8 however crashes. switch it to the other way around and the
win 7 works and the win xp on the database server stops with frm-92095 error version number too low. while on the middle tier Xp PC a blank doucument is displayed.
How can i have both working at the same time please. I you need more information i will happily supply it.
Neill
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
###baseHTMLjinitiator=basejpi.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=scott/xxxxxxxxxxx@orcl
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=E:\DSHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

You have a mixture of problems here.
1. Oracle Jinitiator is not supported for use on Windows 7
2. JRE 1.7 is not supported for use with any version of Forms on any platform. Be sure you do not have this version installed.
3. JRE 1.6 is not supported for use with Forms 10.1.2.0.2, however is supported with 10.1.2.3 (10.1.2.0.2 + patch ID 5983622) and only with IE 8
4. In order to use Win 7 with Forms 10 in a certified and supported manner, you must use 10.1.2.3 (meaning 10.1.2.0.2 + patch ID 5983622).
In short, my recommendation would be the following:
o Patch to 10.1.2.3 (assuming you have access to MyOracleSupport)
o Don't bother trying to use Oracle Jinitiator as it is old and has been desupported for a long time.
o Uninstall any instances of Jinitiator as it can cause conflicts with other JRE installations.
o Uninstall all instances of JRE 1.7. Reconfig your formsweb.cfg to use the JRE (Java Plugin) 1.6.0
baseHTMLJInitiator=basejpi.htm
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_mimetype=application/x-java-applet;version=1.6
jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads/jre-6u27-download-440425.html
jpi_codebase=http://javadl-esd.sun.com/update/1.6.0/jinstall-6u27-windows-i586.cab#Version=1,6,0Finally, refer to this:
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA

How to install Oracle BPEL Process Manager for OracleAS Middle Tier

hi,
i need to install BPEL process manager, so i download the following file from otn
1.soa_windows_x86_101310_disk1
2.soa_windows_x86_bpel_101310
here i read the document named b28980.pdf from bpel\doc\pc.1012 to install BPEL PM
so i start to complete the pre-installation task
1.installed Oracle database 10g
2.Run the Integration Repository Creation Assistant on the Database
3.Install Oracle Application Server 10g Release3 (10.1.3.1.0) and select either the J2EE Server installation type or the J2EE and Web Server installation type. selected J2EE and Web Server installation type
and installed according to the Oracle application server installation guide.
installed OracleAS in the path : D:\product\10.1.3.1\OracleAS_1
4.Install the current release of Oracle BPEL Process Manager for OracleAS Middle Tier
here they mention to select the J2EE and Web Server installation type because that type is selected in Oracle AS installed in Oracle Application Server
so i start to install the BPEL PM by selecting the setup.exe-->and shows the location source and destination
default destination is : D:\product\10.1.3.1\OraBPEL_1 selected next on the screen
the next screen is select installation type here there are two types named
1.BPEL process Manager for Developer (371MB)
2.BPEL process manager for Oracle AS Middle tier (107MB)
i selected 2.BPEL process manager for Oracle AS Middle tier (107MB) and click next
pop up window opens with title dependencies
error:
BPEL Process manager for oracle AS Middle tier will run on top of a supported Oracle Application Server 10.1.3.1.0 J2EE server and Web Server Or J2EE server instance. this location does not contain this instance. Please select new Oracle home that contains a supported instance.
so i changed the destination path to : D:\product\10.1.3.1\OracleAS_1\BIN then also i got the same error.
please any one mention the path for J2EE and Web Server instance for installing the BPEL PM for Oracle AS Middle Tier.
Thanks in Advance
Aswath Thaniga

If you choose the developer version you will be fine.
If you have installed J2EE and Web Server installation into D:\product\10.1.3.1\OracleAS_1 then this is the location you install your BPEL PM into, not D:\product\10.1.3.1\OraBPEL_1 or D:\product\10.1.3.1\OracleAS_1\BIN.
D:\product\10.1.3.1\OracleAS_1 is what we call the ORACLE_HOME, generally we create a new home for each install, but in this case there is a dependency on 10.1.3.1 OC4J container. So it needs to be installed into 10.1.3.1 oracle home.
The bin directory is just the executables for that home, its not the actual. home.
cheers
James

Error while doing sqlplus on middle tier

hi all,
while i am trying to connect to sqlplus from middle tier i am getting this error. please let me know what wrong. thank you
SQL*Plus: Release 10.1.0.4.2 - Production on Mon Sep 15 09:55:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name:

ERROR:
ORA-12545: Connect failed because target host or object does not exist
$ oerr ora 12545
12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
$ Please post your tnsnames.ora from midtier Home.

Communication between middle tier and infrastructure

Hi!
We have seven OAS machines with two infrastructure-instances and seven middle tier - instances which use these infrastructure.
My short and simple question is: how does the communication between the middle tier and the infrastructure work? is there any file on the middle tier where you can see which middle tier is assigned to which infrastructure? there is no entry in the tnsnames.ora and i can't see any hint in the opmn.xml ...
Regards

If you just want to see which midtier is bound to which infrastructure you can check $ORACLE_HOME/config/ias.properties . This doesn't explain how communication works though.
The process is roughly sad like this:
Every midtier has a dcm-daemon. This daemon contancts the infrastructure upon start, stop & restart automagically. Next to this the daemon also contacts the infrastructure if you make changes using the enterprise manager website. If you make changes manually, you have to for the daemon to contact the infrastructure by issuing dcmctl configupdate (of updateconfig, this I mess up all the time ;) )
The infrastructure stores certain parts of the configuration in the metadata repository, other parts are replicated to other components in the farm (e.g. if you created clusters).
Communication is made by issueing secure ldap statements on port 636.
This is just the basics. For more insights you either have to start reading manuals / metalink or contact an expert ;)

Client-middle tier communication.

We'd like to inform the middle tier of some choices made in the client but I'm not sure how this communication should be achieved.
For example, the user logs-on using a (non BC4J) method which establishes the user-name and access level.
I want an EntityObject (An AuditTrailEntity) to be able to set the username in any new rows created.
I want ViewObjects to restrict the rows returned based on the access level.
I see I can create some ViewObject methods and export them to the client but can these be class (static) methods? If not, then I must use object methods that set class variables but this doesn't feel like the "right" solution.
Can I set some properties in a Cookie somewhere (how)?
Is there another (better) method?
Any advice gratefully received.
Tony.
P.S.
As part of my investigations, I've tried adding a RowSetListener:
panelBinding.addRowSetListener(new HistoryRowSetListener());
class HistoryRowSetListener extends JUPanelRowSetAdapter
{ public void rowInserted(JUIteratorBinding aIterBinding, InsertEvent aEvent)
{ super.rowInserted(aIterBinding, aEvent);
Row lRow = aIterBinding.getCurrentRow();
lRow.setAttribute("UserName", sCurrentUserName);
But the getCurrentRow() returns the row that's current when the insert was performed, not the row that's being inserted. Is this intended? If so, How can I get the row that's being inserted?

In the client some properties are acquired (from a legacy system) and we want to communicate these to the middle tier. We'll want certain
ViewObjects (in several ApplicationModules) to behave differently.What are the client properties? Are they like read/write access priviledges?
If the client properties change, then we need to re-communicate with the middle tier to alter the ViewObjects behaviour again. For example,
the user is only permited to see their own (or their own region's data). For the most part this can be achieved by modifying the SQL but for
some attributes, we may show the row but hide the value.In 9.0.5 release of BC4J we will have access privilege support in both design time and runtime. We plan to have api for obtaining read/write access based on the logged in user role(s). You can use this info to map the ui.
I think our client could probably call ViewObject.setWhereClause() but I'd rather have this functionality encapsulated in the Business
components.
If you want to set username
then it should be on the session or root AM.
This sounds near the solution. Can I access the Session in both the client and middle-tier. I saw ApplicationModule.getSession() which I'm
hopi[i]Long postings are being truncated to ~1 kB at this time.

Control without client or middle tier server

Is it possible to remote control/view workstations without having the
client OR a middle tier server set up? We only want to be able to control
our workstations from inside our firewall, so the middle tier server
would not be needed.
Another question, is it also possible to run naldesk the same way to push
applications out to workstations without the client installed (with or
without the middle tier server). Thanks in advance.

Desktop4 can use any of the options.
It really is a bit cumbersome to use at the moment, but drop me a note at
my email address of craig_d_wilson at yahoo dot com in about 2 weeks.
I'm in the process of writing a small front-end program for use in
clientless environments. I should have something going by then.
Normally the Workstation Object gives rights to the local SYSTEM account
when the Novell Client is around to access NetWare shares.
In a Windows Domain Environment, you can use the Windows Domain workstation
object to do the same thing.
Otherwise you may have issues accessing system resources when process are
running in System mode.
FYI, you will 100% need a middle-tier server to get your App Objects.
It will not be needed to RC or transfer files, but you will need at least
one mid-tier server.
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE, CCNA
http://www.ithowto.com
Editor - http://www.ithowto.com
<[email protected]> wrote in message
news:[email protected]...
>> Yes to all of your questions.
>>
>> In regards to remote control you have two options.....
>>
>> 1) Use Desktop4.exe with password based remote control to connect to
> the
>> remote PC.
>> 2) Have the remote PC use the option to Request a remote control
> session
>> from the support personnel.
>>
>> Search support.novell.com for desktop4.exe and there should be a couple
> tids
>> that go into detail.
>>
>> In regards to distributing applications.....................
>> 1) Are you in a Domain or Non-Domain environment. This controls what
>> options you have.
>>
>> --
>> Craig Wilson
>> Novell Product Support Forum Sysop
>> Master CNE, MCSE, CCNA
>>
>> http://www.ithowto.com
>>
>> Editor - http://www.ithowto.com
>
> Thanks for the response! We are currently strictly netware with no
> domain, but we were looking at moving towards a domain (we are testing
> both OES cores to act as a PDC to authenticate through edir, both of
> which we got to function correctly :-) So we were just looking at the
> rest of the stuff we may or may not lose by going that route. We
> currently use ZENworks mostly to remote view student workstations,
> control admin machines, and image all the machines. We also occasionaly
> push out small apps or registry changes with Nal, but not that often. Can
> you simply remote view the workstation (without the user knowing) or does
> desktop4.exe only control the machine? I will have to check it out.
> Thanks again

Applet clients accessing EJB middle-tier

Hello
I am trying to have an Applet access the stateless session EJBs on the middle tier (OC4J 9.0.3)
The applet works fine in the AppletViewer.
However in the IE browser version 5.5, I get java.security.AccessControlException.
Which I can understand because applet is not allowed to open a RMI-IIOP port on the remote server.
What steps do I need to take to allow the applet to open such a connection. Signing jars?, java.poclicy file ?
I know that this setup works fine on JBoss and also on WebSphere. (using certificates)
Is this not suported by OC4J? Does the server need to support something or is it strictly a client side issue?
Any comments will be highly appreciated.
Thanks
vijay

We are having Applet-clients with OC4J and it works fine. We sign all our client-jars (including oc4jclient.jar) and our application has all permissions at the client. Modifying java.policy works as well, but signing Jar-Files is simpler and doesn't need any client-changes.
For normal operations it seems ok to include oc4client.jar for the client application, but we are using JMS and therefore need a lot of classes of oc4j.jar - so I buildt my own deployment-jar out of oc4j.jar.
If you use the cache_archive and cache_version attributes in the html-tag, all the jar-files are only downloaded at application startup if they are changed on the server (und version-numbers are increased). So startup-time is comparable to a local application.
Gilbert

MTS Client Library Configuration (Case: Two middle tier servers)

One of Oralcle document states:
(a) If you need to configure Oracle Services for MTS on 2 middle tier computers (say #1, #2)then you have to install OraMTS on #1 middle tier system. The #2 middle tier system can use OraMTS which exists on middle tier system #1.
(b) For achieving this you have to configure Oracle Services for MTS client library on system #2.
Can any expert provide more information about how to configure the step (b) above.
My environment:
Oacle Services for MTS version: 8.1.7
Database: Oracle 8.1.6
Middle Tier: Windows NT 4.0
A fast reply will be highly appreciated.
Thanks in advance.

Vivek Raja
3) On machine 1 use the MMC snapin to create the Oracle service For MTS for database DB1.
You mean below
On machine 1>>
[start->programes-> oracle-oraHOME81->application development->oracle manager for microsoft transaction server]
make new service for DB1.
(oracleMTSService0 started)
On machine 2>>
[oracle manager for microsoft transaction server]
I add a new computer-"machine 1".
Then automatically OracleMTSServices0 on
"machine 1" displays.
and "Microsoft management console" dialogue box appears and ask save the change when i exit oracle manager for MTS. I choose YES.
that's all?
Am i right?
On machine 3>>
like machine 2.
You might be boring but Any documents offered by oracle doesn't say it clearly.
rf)) I read "using microsoft transaction server with oracle8-A73029".

Windows Integrated Authentication Help From Middle Tier

We are trying to enable single sign-on using Windows Integrated Authentication so that the user does not have to enter a username or password, they just get logged in automatically. I created the current Oracle account on the database and it works just fine when I try to connect from my local computer to the database. Our problem is that our application calls an application that runs as a Windows services on the middle tier, and so it gets an invalid username/password error. I can see in the audit logs that it is trying to connect to the database as NT AUTHORITY\ANONYMOUS LOGON.
The client, middle tier, and database are all Windows based operating systems. The applications is a .Net application and we turned on Impersonation which we read will help pass the client OS user to middle tier so that the application runs as them. And that appears to be working correctly. Again we can get this working when we host the windows service locally, it just wont work when it is hosted on the middle tier. Any ideas how to get this to work?
Oracle version 11.2.0.2 and 11.2.0.3
Windows Server 2008 R2

Hi, jeff81.
I had same problem with Win2003 server. Try this:
Start -> Settings -> Control Panel -> Administrative Tools -> Services
then select "PROPERTIES/LOGON" for necessary service.
Change "Local System account" to your user account.
Make sure that user account have necessary grants.
ps. sorry my poor english :(

Remote Control and Middle Tier

We have a Middle Tier installed in a DMZ on a separate tree. Logins are ok, Applications are launched and installed, workstations are imported and inventoried however we cannot remote control the workstations.
At the moment I am getting an 1858 Error message (timeout).

http://www.novell.com/support/viewCo...6323&sliceId=1
http://www.novell.com/support/viewCo...8425&sliceId=1
I've never done it myself, but those TIDs may help.
And if either PC is behind a NAT'd Firewall, you will likely have issues.
You could use Port Redirection for the Console ONE pc on your side but if
the PC on the other side is NAT'd, you will have issues too.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"tassos g" <[email protected]> wrote in message
news:[email protected]..
>
> Hi Craig, thanks for your suggestion, could you please give me a bit of
> assistance in setting this up, I would much appreciate it.
>
>
> --
> tassos_g
> ------------------------------------------------------------------------
> tassos_g's Profile: http://forums.novell.com/member.php?userid=33638
> View this thread: http://forums.novell.com/showthread.php?t=354046
>

Changing Middle Tier Hostname

Similar Messages

Maybe you are looking for