Changing object names during expdp or impdp

I'm curious to know if expdp or impdp is able to change object names during the process. What I mean by this is... can I export out procedures:
procedure1
procedure2
procedure3
Then import them like this:
test_procedure1
test_procedure2
test_procedure3
I'm not sure the expdp or impdp has that ability, but I could have missed it. I know how to remap a schema, but that only changes the schema name.

You can refer below link for example
http://www.dba-oracle.com/t_data_pump_sqlfile_parameter.htm
http://www.iselfschooling.com/board/index.php?topic=355.0
Regards,
http://www.oracleracexpert.com
Oracle Premier, Extended and Sustaining Support Info
http://www.oracleracexpert.com/2013/02/oracle-premier-extended-and-sustaining.html
ORA-07445 exception encountered, ORA-04030 out of processes memrory
http://www.oracleracexpert.com/2013/02/ora-07445-exception-encountered-ora.html

Similar Messages

  • Changing object name of role is not reflected

    When I change the Current Object Name for a specific role this change is not reflected. The role still retains it original name in the PCD or when I assign the role to a user.
    This only happens for a specific role in our system. For all other roles the change of the Object Name works fine.
    What am I overlooking?

    Hi ,
    Please check that when you change property 'name' of the role and then click on save button you shud get a  'save successful ' kinda message.
    If not then may be your role is locked by some other portal user id and thus not allowing you to change it. Please note that this will also not allow to change any property of the role, so you can test this by trying changing the other properties of the role.
    If this is not the case, then compare the properties of two roles one whichis working fine and the one which is not.
    Thanks,
    Namrta Mahajan

  • Changing Object Names for Burst Output in Financial Reporting

    I can't quite figure out how to say this so I can't even search for the proper terms to get any pertinent results. I apologize if this has been answered recently.
    In FR Batch Scheduler, I am exporting the reports as PDF to a specified folder. I am bursting the report with a department, however, it does not like to save files with spaces. Instead, FR replaces any spaces in the Object name with a plus "+" sign. Is there a way to change this to a different delimiter in the .properties files? Not sure which one.
    Thus:
    Date is March 2nd, 2011 and Member name is "Physician Revenue"
    Object Label:
    <<Date(YYYYMMMDD)>>.<<MemberName()>>.IESUM
    PDF Output becomes
    2011Mar02.Physician+Revenue.IESUM.pdf
    Desired FileName output
    2011Mar02.Physician_Revenue.IESUM.pdf
    Thanks
    Eric

    If this is the same issue I'm having, I've been working with Tech Support - they confirmed it as a bug the other day and the patch is done but it's not ready for us to have yet. They'll let me know when it's available for public use.
    When bursting, the resulting PDFs have strange characters in the PDF name for many characters such as these that we use:
    and probably "space", I'm not looking at it right now but yes this sounds like your issue too. Stay tuned.
    -Karen
    edit: I'm on 11.1.2.1
    Edited by: ksmek on Sep 28, 2011 10:34 PM

  • [jpublisher] how to change object names

    Hi all,
    please, i really need your help to solve this one...
    i'm working with jpublisher and it's working perfectly... but i need to change the objects name that are created by jpublisher. how can i do this?? have any idea???
    thanks in advance

    Hi,
    As per you we assume that this object is master data object for text : 0PROJECT_TEXT
    If you define as a Data target you need to load the data from PSA(Data source to Data target) , Here transfermations will come into the picture ( in BI 7.0)
    if you are going to load the data in 3.5 flow , transfer rules will come into the picture.
    If It is Update rules/ Transfermations try to make it active manually ..
    1. Go to RSA1 >>> And find the Data Target >>> Double click on Update Rules
    2. Click on Change button, then activate the Update rules.
    If it is transfer rules , try make it active by using this program
    in SE38 ; RS_TRANSTRU_ACTIVATE_ALL >> Give the source system name >>>>> Info source name to activate the transfer rules as well as transfer structure.
    It may help you
    Regards.
    Rambabu

  • Content collector tool changes object names randomly (!)

    Hi there,
    I am using the content collector tool to bring identical MSOs and buttons to a horizontal page (which might look the same as the vertical), and when I place all the stuff in the H page, all buttons and so the MSO changes its names adding "numbers" at the end of...
    It is a bit frustrating, having to "rename" it all to its original names. As fair as I have read in Adobe Guidelines and tutorial videos, all buttons and MSOs should be named the same, for Analytics purposes... So, is there a way I can do to avoid these inconvenient changes? Or is this not that important and I'm being so fussy about the thing??!
    Thanks!
    Clarissa

    Found a potential work-around (I think....).
    1. Use the Content Collector tool and select grouped objects
    2. Select Content Placer tool, check "Create Link"
    3. Place grouped object into doc/onto page with Content Placer tool
    4. Copy placed grouped objects
    5. Paste into frame that will be scrollable later
    For now it seems like the link still works

  • Published UPK files change Object Names from "Options" to "Guiliani says De

    When we published our UPK files to our server, the Object Name of the captured object from whatever innocuous name such as "Options" or "Manufacturer" or "Driving Directions" to "Guiliana says Dems won't say 'Islamic Terrorist'" or in UPK ITSELF, even thought the screen is correct the Object Name in the developer UPK was changed to "Fred Thompson" which the developer did NOT do, and one object name was changed to Rasheed something, someone's name.
    When we demo our simulations, it looks like the training team does this, but we do not. It happens after the sims are uploaded to our server.
    What gives?

    Great resource John T.
    Thanks,
    Hunt

  • CAN'T Update Server name during login (since I have changed computer name)

    I had a working environment of SAP BO 8.8 installation (VM), I made a second copy for a someone who needs to change his server name so we don't collide with each other.  So he changed his server name fine and now when we try to change the name during login in SAP BO, we are completely unable to do anything, no company or database shows up and when you try typing server name it won't allow you since it is a drop down, the only availble server name is the old server name.
    We went to Service Manager, got a new license key for the hardware key, update fine as well as updating the server name there but when we try login, we are not able and no matter what we do we are not able to change the server name.  Please help, it is getting desperate (tried all things possible).
    Thanks

    In working VM copy, do a global search for the server name in all configuration files in SAP install directory.  Then compare with copied copy and try to change appropriate names in all files.
    Changing server name is a complex process, it has many references in many configuration files that you may have to touch.
    This will be an uphill battle. Goodluck.
    Lots of other things you can do, ping by hotname, check hostfile in case vm is also using it, there are two types of vm installs network or self contained (something like that) - so hostname may be getting masked by vm network environment, definitely SAP has few configuration files where the Server name, db name, license server name, port etc are present, even check for firewall settings etc.

  • ORA-39166: Object was not found in impdp

    I am trying to do an impdp to another database.
    Both databases are 11g on AIX.
    This is the command I use.
    impdp &dUSR/&dPASS@&dCONN REMAP_SCHEMA=&uUSR:&dUSR directory=DATA_PUMP_DIR dumpfile=file.dmp logfile=...log content=DATA_ONLY table_exists_action=truncate 'TABLES=(table1,table2,...)'
    &dUSR is for destination databsse.
    &uUSR is for source database.
    I am getting the following errors:
    ======================
    ORA-39166: Object TAR.TABLE1 was not found.
    ORA-39166: Object TAR.TABLE2 was not found.
    ======================
    When import command was modified (table1 -> &uUSR.table1) so it becomes:
    impdp &dUSR/&dPASS@&dCONN REMAP_SCHEMA=&uUSR:&dUSR directory=DATA_PUMP_DIR dumpfile=file.dmp logfile=...log content=DATA_ONLY table_exists_action=truncate 'TABLES=(&uUSR.table1,&uUSR.table2,...)'
    The import works. I am already using REMAP_SCHEMA so why is this necessary?

    VST,
    Expdp was done as tables=foo rather than tables=user2.foo.This means that the foo table that is in the dumpfile would have to be originally in the schema running the job. So, let's say your export was
    expdp user1/pass1 tables=foo dumpfile=mydump.dmp ...
    This means that table user1.foo would have to exist (or you would get an export error) and this table would be in the dumpfile.
    So the bottom line is to transfer between databases and schemas I need to use schema either during expdp or impdp and remap_schema is still necessary?If you want the table user1.foo to be imported into the target database, all you need to do is run either this command:
    impdp any_prived_user/password full=y dumpfile=mydump.dmp ...
    -- this would require that the user1 is already created in the target database. It will create table user1.foo
    or this command:
    impdp user1/password full=y dumpfile=mydump.dmp ...
    -- this would require that the user1 exists because you are running the job from user1.
    If you want this to go into another schema, then you will need to use remap_schema in the impdp command.
    Hppe this helps
    Dean

  • Class and Object name change in the universe designer

    Hello Experts
    I have a confusion , I am just wondering if I devlop a bobj universe, lets say, based on SQL database and change the name of the class and object during the creation of the universe, will that fetch the data from d/base properly while running a query / report. Although universe class and object has different names than database now but the records are the same. Do we need to point the object to d/base object in some kind of different or special way .
    To make my question more simple, In d/base table name is "Employee" whereas on universe side I create a class name "Staff" and at the same time field name in the database is "Emploee ID" whereas in the universe I named it "Badge number".
    Please advise if that will make any difference while I run the query or Is there any kind of complication on the universe side that I should expect which I am not familiar with.
    I would apprecite your response.
    Best Regards

    Hello experts,
    Let me rephrase the issue with exact scenario.
    I have a table names "REGION" with fields region id, region and country id.
    I have another table name REGION_SLINE with fields SL_id, region id and Sales_revenue.
    I created an equi join between these two tables based on region id field and checked the cardinality which is ok.
    Now when I try to create a report based on sales revenue per customer ( "customer's first name"  is an other field on CUSTOMER table), I dont get any result in the report and get a message that "No data to reterive"
    Also please note that when I run a report which is sales revenue per region id, I get the result, seem slike these two tables REGION and REGION_SLINE can generate the report but sales revenue per customer report is not generated because customer first name is a field of another table.
    I was just wondering if I need to write some kind of where clause in the object properties of region id which is used to create equi joon link.
    I woulld appreciate your response.
    Regards
    Edited by: SAP_LCCHS on Jul 4, 2011 9:19 AM
    Edited by: SAP_LCCHS on Jul 4, 2011 9:21 AM

  • How to change the name of a Box Object in Crystal Reports 2008

    I am trying to change the name of a box object in a crystal report - 2008. This report was originally developed by consultants and requires that certain boxes be named according to a specific naming convention. I am making a change to the report and need to add a box with a name that matches the naming convention.  This is so some program functionality will work for the new box.  I can't contact the consultants because they don't work with our company anymore.
    Does anybody have any ideas? I've tried 'Format Box', but it won't let me change the name from there. I also tried it in the Report Explorer but to no avail.
    Thanks,
    Joanne

    Hi Joanne,
    Boxes do not actually have a 'name'. When you add a Box in a report, it will be called 'Box 1' by default. And the only place this name is visible is under the Report Explorer.
    Or do you mean to say 'Text Object'?
    -Abhilash

  • BADI name during SAVE after creating or changing a material in MM01and MM02

    Hi gurus,
    Please refer me BADI name during SAVE after creating or changing a material in MM01and MM02.
    Whenever a user changes or creates a meterial ,I want the BADI name at that point.Exit name or Enhancement point will also suffice.Please help..

    Hi,
    Enhancement: MGA00001
    Function module Exit : EXIT_SAPLMGMU_001 Enhancements for Material Master Tables
    BADI_MATERIAL_CHECK  Enhanced Checks for Material Master Tables
    BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data

  • Change documnet name for BOR object DEVICE.

    Hi expert,
                        Could You please tell me Change document object name of BOR object DEVICE for creating new entries in SWEC transaction.

    It does not look like there is one. How to find out?
    1- Find the actual table of the BOR object
    2- Go to transaction SWED to find out if this table is linked to a change document object

  • Changing of R/3 PS Object Names affects BW reporting

    Hi all
    Would like to ask for some help on PS Objects in R/3 and BW. Current we are running BW 3.0B in Production, and we hit this issue on PS objects. In R/3, names for PS objects such as Project Definition, WBS Element, Network Activity and Network Activity Element can be changed by the R/3 users. This posed a problem to BW, as it could not recognize the changes made to the PS Object name and unable to reflect it correctly in BW. It will subsequently bring in the PS transaction data as a separate line item for the same object multiple times, and this causes reporting problems in BW.
    From what I can search in the SDN and OSS, it looks like it is a design problem with the WBS and Project Definition (OSS Note 739182). I tried some solution recommended at this thread (WBS Updates in R/3 not Key in BW) and it helps 0PROJECT and 0WBS_ELEMT, by pulling the internal key into the 0PROJECT and 0WBS_ELEMT characteristics and placing the external key to the 0PROJECT_EX and 0WBS_EX characteristics. This solution works in testing, but when it comes to Network Activity and Network Activity Element, we were stumped again.
    We do allow R/3 users to change the Network Activity and Network Activity Element in R/3 system, as it is part of the business process. This posed a problem, because unlike Project Definition and WBS, Network Activity and Network Activity Element does not have internal or external ID. They also don't have characteristics similar to 0PROJECT_EX and 0WBS_EX. On the other hand, we cannot stop users from changing the Network Activity and Network Activity Element in R/3.
    Thus, does anyone have any good idea which can cater for Network Activity and Activity Element? Should we customize/enhance both the characteristics to include external IDs (like WBS and Project Definition) and use a conversion routine (such as WBSEL)?
    Thanks alot for your help!! Appreciate your time spent on this. Cheers...
    Chris

    Well you can either overwite a key figure in a cube or add to it
    ie
    for the same physical key to a ODS per datasouce in the update rules you can have this scenarion
    <key to ods>  value
    ..                   100
    now if for the same key we get 300 you can do this
    overwrite
    <key to ods>  value
    ..                   300
    or this
    addition
    <key to ods>  value
    ..                   400

  • WAD - change column's color by object name

    Hello to all.
    I'm new in WAD.
    Does anyone has an idea how to change the color of a specific column in a templte by the object name ?
    Thanks in advance, Amir.

    1.Create an exception on the key figure as KF > 0.
    or
    2.You can do it using javascript.
    The below code i assume the column number is 3.Change it as per your column number.
    Paste the below code in the HTML between </BODY> and </HTML>
    <script type="text/javascript">
    var obj = function getTableReference( "YOUR TABLE NAME" );
    for (var rowno =0;rowno < obj.rows.length;rowno++)
    obj.rows(rowno).cells(4).style.background = "red";
    function getTableReference( table_name ){
    var all_tables = document.all;
    for( var i=0;i<all_tables.length;i++ ){
    if (all_tables[ i ].name==table_name)//we have found tbl
    return all_tables[ i ];
    return null;
    </script>
    please remove the space in between the square brackets here [ i ].
    Regs
    Gopi.
    Assign points if it helps ...
    Message was edited by: Gopi
    Message was edited by: Gopi

  • Get last changed date by Program ID/Object type/Object name of a task

    Hi to all.
    I'm looking for a way to get last changed date of an object by task number(CR). Any SAP function or utility someone has??
    For example if I have a task with the object list:
    R3TR PROG  ZSD_ORD_COND_P
    R3TR TABL    ZCNDSLCTN
    LIMU  REPS  ZSD_ORD_COND_CLS
    R3TR TRAN   ZZDIS
    R3TR VIEW   ZSD_VBAK_KONV
    I need to get last changed date for each object.
    Thanks,
    Yuval Kaduri, Cellcom, Israel.
    Edited by: yuval kaduri on Mar 2, 2008 2:59 PM

    Hi Venu, thanks for the input.
    In the table I don't have all changes made in objects that the CR is not released. I need to know all changed date of objects even if the CR is not released. There are  few tables containing the date and time object last changed for the deferent types but I'm looking for a function or some utility someone wrote that gets the CR line info as - PgmID/Obj/Object name - and gives back last changed date and time.
    Thanks,
    Yuval Kaduri, Cellcom, Israel.

Maybe you are looking for