Changing Page size in Adobe forms
Hi Experts,
I am new to Adobe forms.I am creating a form whose size is very small with 11.6929In height and 8.2677In width.But i viewed some of the SAP standard reports for example FITP_PLAN_FORM ,the page size is 29.7cm and 21cm width the page type is A4.
I am also using the same page type as A4.Why is this difference? I am struggling to get the page size.
Can any one guide me plz..
Thanks&Regards,
Karthik.
Hi Karthik,
Keep in mind the Units you are comparing. By default, my adobe LiveCycle designer shows the units in inches:
so:
29.7cm = 11.7in , and
21cm = 8.3in
just a thought
regards,
harman
Similar Messages
-
I created a form in Adobe Acrobat Pro from a spreadsheet that I had printed to PDF. However, the PDF was in a landspace orientation rather than a portrait orientation. Does anyone know how I can change the page size and orientation of the form. I tried opening it importing it into LifeCycle Designer, but it messes up my java script calculations. If I print it to another PDF it no longer remains a fillable form.
You really need to go back to your spreadsheet program and properly orient it there. Consider a PDF only a piece of paper that you created. You might be able to create the new PDF and then use replaces pages in the old PDF to keep the form fields. This last step is the typical process to keep the form fields. You will probably still have to move the fields. I am just not sure if the orientation and such will be kept with the replace pages, but that is where I would start. You could also copy the fields from one PDF to the other.
-
Cannot change page size with acrobat
I am able to convert my manuscript in Mac word(2011) to adobe acrobat (XI); unfortunately the 6 X 9 " page size does not convert. I spent a few hours on the phone with adobe support and the final resolution was to upload the file to them and they converted it for me. however, they used distiller which reduced the file size and appears to have affected the many images. Does anyone have any advice? The best I have been able to glean online is work with inDesign to change page size.
Thanks.
The problem was with the paper size. In addition to change the page size I needed to change the paper size in the print option before selecting save Adobe PDF.
From Word go to File> Print
Open the Copies & Pages dropdown
Select Paper Handling
Check the Scale to fit paper size box
Open the Destination Paper Size list
Select your custom 6x9 Preset
Click the PDF button
Select either Save as PDF or Save as Adobe PDF
The unfortunate thing is that I was able to do this initially, but when I went back to replicate it adobe is creating 2 files one with my cover page and the rest to the manuscript. Luckily my initial copy was good. Thanks again for your help. -
How We Can Change Page Size During Report Run Time
Hello !
How We Can Change Page Size During Report Run Time .
How can we stop to change the column name when we amend a sql in report data model.
Thanks !
nullhello sohail
1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
try this: select 1 as fist_column, 1 as second_column from dual
hope this helsp -
How to print page numbers in adobe form
Hi,
Can anybody tell me how to print page numbers in adobe form.
Thanks in advance
ChaitanyaHi,
Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
My requirement is to have the user control on current page. For Example:
Example for a Invoice with 5 PO items (stands on 2 pages) :
1st page is the letter : no page number
2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
I have used the follwing java scripting:
this.rawValue = wv_pages - xfa.layout.page(this)
where wv_pages is total no of pages calculated from print program.
Please help me in this regard with some formcal or java scripting conditions.
Thank You,
Regards,
Naresh. -
How to allow domain users to customize page Size in Adobe PDF printer.
Hi all,
I am not able to customize page size in Adobe PDF printer when I logged in with Domain user login. But I am able to Customize PDF printer in admin Login.
I need a solution to allow Domain users to customize page size for Adobe PDF printer.
Looking for a solution ASAP
Regards
NageshOops, I misread your question, so I edited my response.
-
Change page size in Acrobat Pro 6.0
Hello, I'm wondering if there's a way to change page sizes in Acrobat Pro 6.0 for Windows. We are receiving manuscripts which have been assembled from various documents. They're going to be printed at 8.5 x 11, but sometimes some of the pages are 7 x 10. Is there an automated way to change all the 7 x 10 pages to 8.5 x 11? We don't want to have to do each page individually because there are too many of them.
Many thanks,
CoralYou could try printing to a new PDF with the PDF printer, setting the page size to 8.5 x 11 and setting the page scaling option to 'Fit to Printable Area'. This will hopefully leave the existing 8.5 x 11 ones about the same size (it may shrink them slightly) and scale the other sizes.
-
Introduce left/top margin: Change Page Size ignored
I have a vector drawing of a technical schematic in PDF. The drawing is an extract of a much larger schematic, so it is very small: 2.2" by 1.648". However, when I print it out, it is resized to fill up a Letter size paper (8.5" by 11") and the size is then perfect for viewing. Also, the PDF has no white space around the edges, so the same PDF is perfect for importing into documentation packages.
However, for hard copy printing, depending on the exact aspect ratio of the drawing, I will sometimes want to introduce white space along one edge for hole-punching purposes. I am opening the PDF and printing it from Acrobat 8 Professional. I cannot use Document->Cropping because I am trying to introduce a margin rather reduce an existing margin. I tried using the Change Page Size controls in the cropping dialog panel. Originally, it was set to Fixed Sizes and Page Sizes was set to None. I selected Custom instead of Fixed Sizes, then I entered in the Width and Height in inches, with the Height being about 0.5" more than the original 1.648" (it's landscape, so the holes will be at the top). However, the illustrative diagram does not change, and neither do the dimensions shown on it. I click OK and the PDF as viewed did not change -- no white space. When I go back into the Change Paper Size dialog, all the size data that I entered is gone and the control have reverted back to Fixed Size with a Page Size of None. I explored the dropdown list for Page Sizes, and none of them are appropriate for such a small diagram.
What I'm trying to achieve is a pretty simple effect, and I thought it would be straightforward. It has to be *very* simple as I expect to do this regularly. Is there actually a way? Ideally, it doesn't involve calculating all sorts of bounding boxes and offsets. Who knows what the assumed reference points for those are. In fact, the most direct way would be to enter a negative Margin Controls in the Crop Margins region of the dialog. That is not possible, of course.Actually, I found a way. The reason why the page size was being ignored is because the numbers were too small. If I enter a big enough number, it sticks. It would be nice to get a message to that effect though.......sigh.
I can then adjust the cropping margins to get the gutter.
Thanks. -
XI Pro: How to change page size?
I have a letter-sized document where each page has extremely large margins and text in a tiny font size. Can I use the 'Remove White Margins' function (Crop pages > Set Page Boxes) to remove the large margins and then resize what remains back to 8.5" x11" using the 'Change Page Size' function?
When I try this, I can do the first step and I'm left with pages about 5.5"x8". But the Change Page Size function does not allow me to resize the page.
It this possible?Hi J Kart,
Please refer the doc: https://acrobatusers.com/tutorials/how-to-resize-pages-in-a-pdf-file
Regards,
Rave -
Tcode for creating new page size in smart forms
dear friends ,
can any one tell me the tcode for creating new page size in smart forms.
thanks®ards
veerachamypage formats?
check in SPAD.
Regards
Prabh -
Possible to enlarge white space by changing page size?
Greetings. I'm using Acrobat 10 pro now, but in 9 it was possible to enlarge the white space around the text by changing the page size as part of the crop command. This was very handy for creating an area large enough for text box comments. I can't find this capability in 10. Am I, hopefully, mistaken?
Select: Tools > Pages > Crop
and then double-click on the page. You'll then get the Crop dialog and you can select a larger page size in the CHange Page Size area. -
Hi
Need some help in Page totals in Adobe forms
I am having a table which flows into several pages .
I need to display the Total of a column at the end of every Page .
How can i achieve that .
I have tried the Script wih the pageContent method it is not working .i have also tried the sum method but it gives the grand total not the page total
Since we can not know at what record in the table page break can occur, i can not add in the back end program . It has to be done dynamically .
Please help me .
Thanks
RamakanthHi
Thanks Andres
I am now able to do the Sub Totals , but i am facing a new problem
My Requirement is
I have a table in my Design page
If the data in my table flows for more than one page then
1) I should show at page end sub total of Net Amount column in the table
2) The same Amount should be shown in the starting of the Second Page after which the table contents should flow
3) At the end of Page 2 i should again display the total amount which is addition of total from previous page and sum of all items in page 2 .
Example
Page 1
Documentnumber currecy Amount
1 USD 100
2 USD 200
3 USD 300
Balance CarryFwd 600
Page 2
Balance Carryfwd 600
4 USD 1000
5 USD 2000
6 USD 3000
Balance Carryfwd 6600
Page 3
Balance Carry fwd 6600
..... and so on
I have tried to use the Overflow leader and Trailer to get this functionality but in that case only texts are being displayed
not the Values .
I have tried to create the BalanceCarryfwd form in Master page but the sub totals are not comin up there .
How can i implement this logic , Please help me in this .
Thanks
Ramakanth -
How to change the page break in adobe forms
Does anyone know how to change the page break on an adobe form? I'm hoping it will be the same way you change the page view in excel.
Can anyone help?
Thank you in advance,
PriscillaHI
YOU CAN USE THE FOLLOWING SYSTEM FIELDS OF SMARTFORMS FOR THE MENTIONED PURPOSE
<b>&SFSY-PAGE& </b>
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
<b>&SFSY-FORMPAGES&</b>
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output
<b>&SFSY-JOBPAGES& </b>
Contains the total page number of all forms in the currently processed print request.
REGARDS
ANOOP -
Adobe Reader on Mac changes page size when navigating or searching
Upgraded to version 11.0.09 of Reader and when I search or use the navigation links the page size is not maintained. How do I set the page size to remain constant for all actions in Reader.
Hello,
Is this happening with all the PDF files?
Reader doesn't change the Page Size automatically.
Regards,
Anoop -
How to set Page Format in adobe form
Hi,
I am designing a simple print forn using Adobe, since printer is dotmatrix page break should be triggered longer then usual A4 size.
If I do the same thing using Smartfom I will define a page format and under output type of the smartform I will assign it, this is enough to tell the system what is the length and width of the page I am using for printing.
how can we achive this in adobe form.
Regards
BikasHello,
go to your master page and change the master page/page format/size as you wish.
Otto
Maybe you are looking for
-
Update 4.1.2 wifi turns off when mobile data is on.
Since the latest update from Verizon whenever I connect to Wifi it connects then drops back to 4G right away. When I turn off the mobile data the wifi will connect again. This was never the case prior to the update.
-
Hi all We are currently using Fiscal Year Variant Z6(July - June, 4 special periods). When we display the texts for Fiscal Year Period in a Query it displays as CALMONTH FISCYEAR. E.g. July 2004, which is FISCPER 01.2004 but Calmonth 07.2003 (July 20
-
Billing document number terminated
Hi, I have a scenario wherein I am creating billing document post delivery, but the billing document number that is generated gets terminated. Hence while creating a billing document, I see a billing doc number on screen. But on going to VF03/VF02 i
-
How to incorporate a Stored procedure with ARD file (ADD ON)
hi experts i created a SP which is called by the following code. Dim GD As SAPbouiCOM.Grid Dim Query As String = "exec sp_Attendance_Report'" & vmonth & "','" & vyear & "'" GD = objForm.Items.Item("10").Specific GD.DataTable.
-
I have Elements 10 and every time I go to open a file in the editor it shows its thinking and then it just shuts down the entire program. I have a big wedding I am working on and lots of other sessions. Please PLEASE help!!!!