Changing "Reel" number keeps reverting back to old number.

I have a situation where I changed the reel number on about 75 tapes that I have. After changing the #'s, I noticed that about 65 of the changes kept and about 10 keep reverting back to what they were before I changed them. Any ideas on why this is happening? As an example, I had the tapes numbered as: 1001, 1002, 1003, etc but decided to be more specific with my tape labeling and changed them all to HT1_1001, HT1_1002, HT1_1003, etc. All the changes stuck except for a select few. I've even tried dragging the source quicktime file (which is labeled correctly) back into the project...to no avail.

I don't think I would have thought of that, assuming your capture scratch was all on one drive. Thanks for posting your solution, hardly anyone ever does that around here.
bogiesan

Similar Messages

New contract, reverted back to old number?

Hi I received my new phone that was taken out in a new contract last Thursday. I wanted a new number to stop all the unwanted calls from my old number.
Therefore text everyone my new number... that came with the phone on a new sim card.
Today I have not been receiving any of my texts and sending texts keeps failing... I thought it was my signal, until I phoned a friend and she said it came up as my old number..
Can anyone advise me why a new phone and contract has reverted back to my old contact number?
Thanks

It looks like they have done this as an upgrade, I would advise you to ring EE and ask them to change your number to a new one, not sure that you can use the number that came with that phone, though.

Song/Album info keeps reverting back to old version when played on itunes

Hello everyone,
I am having trouble with iTunes 6 reverting my Track/Album information to the original when I select the song or album to be played. I have re-organized my library's live albums' names to start with the year in which it was recorded rather than original album name; however, when i click on a song to listen to it, the song moves- when I click to show the location of the song playing, it is back listed under the album name that I just edited... any help would be greatly appreciated, this is quite frustrating!
RPW

It sounds like you actually want/need to update the tags of the songs and not just rename them. That's the only way this can be properly handled in your iTunes library.
Perhaps the easiest way to do this is to Edit > Show Browser so you can easily navigate through the albums you've already got. Now, once you select an (improperly named) album from the browser, you isolate all the songs on that album. Just select them all (click one of the tracks and press Apple+a), then press Apple+i to edit tag information. Click the Info tab, and there you can enter the desired/modified album name in the Album field. Once you've done that, click the OK button.
Another alternative is to display the Year tag in your iTunes library. That way you don't need to edit the Album tags (unless you still want to). To enable the display of the Year tag, go to Edit > View Options and check the box next to Year, then click OK. When you return to your iTunes library, a new column will be added for the Year tag.

The I cloud on mu IPAd keeps reverting to my old password so that I cannot get mail. Sometimes this happens on my iPhone as well. I type in the correct password in the iCloud account and mail account under settings but it always reverts back and prevents

The I cloud on mu IPAd keeps reverting to my old password so that I cannot get mail. Sometimes this happens on my iPhone as well. I type in the correct password in the iCloud account and mail account under settings but it always reverts back and preventsme from getting mail. Can only retrieve mail from i cloud on my competer. Thanks!!!

Why would you delete your iCloud account for a password change with your Yahoo account?
Regardless, if no problem re-creating your iCloud account on your iPad, contact Yahoo technical support.

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

To change your Apple ID, follow these steps:
Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
In the "Apple ID and Primary Email Address section," click Edit.
Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now in the email.
When the My Apple ID page opens, sign in with your renamed Apple ID.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.

Change Outlook Calendar background color but its reverts back to old on restart

Dear Support,
I am trying to change Outlook Calendar background color but its reverts back to old on restart

Hi,
Let's take Outlook 2013 for example, go to FILE tab ->
Options -> Calendar -> Display options
-> Select the Default calendar color and the checkbox for
Use this color on all calendar ->
OK.
In case the Navigation Pane is corrupted, we may try starting Outlook with the switch "/resetnavpane":
Press Win + R and type “outlook.exe /resetnavpane” in the blank box, then press Enter.
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

I am having trouble removing/changing my iphone id. It keeps reverting back to my partners id any help would be appreciated.

I am having trouble removing/changing my iphone id. It keeps reverting back to its previous id. How can I fix this problem?

Jgreg14 you have my sympathies. 36 hours ago while using my iPad I was told that my Apple ID had been disabled. Like you I went to the forums, reset my password, and also like you, nothing changed. I have contacted iTunes support and after 24 hours they responded with this:
Cesar here from the iTunes Store Support Team. Your inquiry is very important to me, so I have requested assistance with the issue you reported. You will receive an email after the matter has been investigated and further information is available.
Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Take care!
Boy do I feel special. I sat on the phone to the UK helpline for 30 minutes, and have been told my case has been elevated to "URGENT".
Basically I was wondering if you ever got your problem sorted out?

HT3529 My icloud account keeps reverting back to my old account on my iPhone?

Why does my newly created Apple iCloud account keep reverting back to my old account, which happens to be my ex husbands email?

Sign out of the account on the device and sign in with the new account.
Just keep in mind that purchases and content are permanently tied to the account they were acquired with.

Hi everyone .Can someone tell me how to change my calendar times from pacific time zone to australian western time permanently,it keeps reverting back to pacific

Hi everyone Can someone tell me how I can reset my icloud calender from pacific time zone to australian western ,it keeps reverting back to pacific all the time
cheers

Settings>General>International>Region Format

Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

YOu need to be clear about the products you are using, so we can help you. In particular there is no trial of Adobe Reader, it is free and keeps running. Sounds like you are using some versions of Acrobat - which?
YOu must properly uninstall the trial, don't just delete files or you may get a mess impossible to recover.

Alpha Channel Settings keep reverting back to "Ignore"

Hey All,
Just diving into FCPX and I had a question about the alpha channel. After finding the Alpha setting in the inspector, I switched to it premultiply. However, upon clicking out of it, the inspector reverts back to "ignore alpha." It does this whether I change the clip in teh Project or the Library. The title animation I'm using was exported from after effects with the animation preset.
Is there a reason why it keeps reverting back to the ignore alpha setting?
Thanks

The computer may require a reset of the +system management controller...+
• Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
There had been a reset method in prior models of PPC powerbooks, etc
that worked by putting your palm/hand flat over the trackpad for a few
seconds, then moving it one direction in one pass. However, that seems
to not be suggested in remedies to resolve Intel-based trackpad issues.
Hopefully the SMC reset will help.
Good luck & happy computing!

Revert back to Old status if ticket results in error..

Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
   When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
   In short please provide enhancement or routine or function module which can revert back to old status.

Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
   When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
   In short please provide enhancement or routine or function module which can revert back to old status.

Whenever I work on my Mac it keeps reverting back to the previous settings once I restart.....Please Help!

Whenever I work on my Mac it keeps reverting back to the previous settings once I restart.....Please Help!

Do you mean that all changes you made to your files are lost, or do you mean that changes to your preferences are lost? For example, pick any small file, make a copy of it, and put the copy on your Desktop. After rebooting, is the copy still there?

Old Illustrator file, revised to new, saved to pdf, reverting back to old Illustrator file

After making a new Illustrator file from an old one, then saving it as a pdf, the new Illustrator file reverts back to old one. I have been using the pdf to make the Illustrator file again (luckily I've saved it as editable) but I don't always want to add this extra procedure. Does anyone have this issue or any clues on how this happens and how to fix the problem?

when you made your changes and then saved as, you saved your changes to a new file. your original file closes without saving and the open file in illustrator is the new one (in your case the PDF).
evertime you save as you are making a new file without affecting the old file.
you should first save your changes and then save as. but after the save as, the opened file will no longer be the original file.
if you do a Save As Copy. then you will be saving a new file which will be closed and your original file will remain open.

Cannot save contact changes in outlook, always reverts back to what it was before.

Cannot save contact changes in outlook, always reverts back to what it was
before.

Hi
As per the information and details provided by you, to save the all contacts in Outlook, please follow these steps: -
By default, when you double-click on a contact in Outlook, the new
Contact Card displays for that contact. The Contact Card does not contain all the fields from the full contact editing window that opens when you create a new contact.
The
Contact Card also displays by default when you search for a contact. You can still open the full contact editing window when editing a contact or when searching for a contact. To switch to your
Contact folder, click the People link at the bottom of the
Outlook window or press Ctrl+3.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Changing "Reel" number keeps reverting back to old number.

Similar Messages

Maybe you are looking for