Changing source for HTMLDataSet

Hi -
Is it possible to change the source for a Spry HTMLDataSet
after the
page loads to a XML data set? I'd like the HTML on a
particular page to
provide the initial information for a product detail page,
but then use
an XML source to provide alternate product info if the user
chooses.
Thanks,
Rod

Hi -
Thanks for the reply. The data sets I have in mind would be
identical
in terms of columns.
What I am trying to do here is construct a product navigator
for a
website that will permit navigation through the products and
manufacturers using Ajax. The problem is that search engines
need to
see content on any given product detail page. My thought was
to use the
new Spry HTMLDataSet to initially populate the navigator with
the
information relevant to the page the visitor landed on, but
to permit
broader navigation of the remaining products via the Ajax
navigator.
The full product list would be too large for a single page,
so this
brings me to the substitution question.
I've set up a poor alternative using ASP and browser
detection for
JavaScript to deliver non-Ajax content to search engines and
the
Spry/Ajax stuff to regular browsers, but your HTML data sets
would be
much, much better.
Thanks again. I've been using Spry in various sites since 1.1
and have
been having a blast - despite having to re-learn my rusty
JavaScript.
Rod

Similar Messages

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

How to change the jta-data-source for projects in EJB 3

Hi all,
Sorry my english! :)
I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
I explain:
In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
What kind of changes (workaround) I could make to solve this problem?
Thanks a lot!
Luciano

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Final Cut Timeline Feed as video source for iChat?

I was at the Apple NAB presentation in Vegas a few weeks ago, and one of the things they showcased in regard to iChat AV was the ability for an editor to videoconference with several other people at once and one of the video feeds in the chat window was actually the output from the editor's Final Cut Pro timeline. As he made changes in the FCP timeline, he could play it out in real time and all the people in the chat could see the video feed and make comments on the edit.
OK- so we were excited because that's a workflow issue we have here. So, we bought some iSight cameras and Tiger and started to do some testing here. The only problem is that it doesn't seem very easy to set up. At first I just thought, "well, they are just playing the timeline out of the firewire port on the FCP machine and another computer is ingesting that firewire stream as a video source for iChat." except when you connect 2 Macs together with a firewire cable, the FCP system doesn't detect a DV video device to output to and the iChat system doesn't detect the incoming firewire stream as a "camera". I spoke to tech support and they said it's not something they support so no luck there.
I did find an article on Creative Cow about someone doing something similar, but it involved exporting the FCP timeline out through a Kona analog video card into an external tape deck that does analog to DV conversion which then can be imported back into iChat as a DV stream, but last time I checked, a Kona card would run me around 1500 bucks.
Anyone have any other ideas?

HI Jeremy,
Welcome to the Aple Discussion Pages.
Based on the Auto Responding iChat Accounts that play films I would guess they were either using an AppleScript to import FCP as the Video sourdce or usiing an Add-On like iChatUSBCam that also alows you to change the video source to the desktop.
iChatUSBcam has a new beta for Tiger http://www.ecamm.com/mac/ichatusbcam/
Ralph

OIM 9.1.0.2 - Weblogic JDBC Multi Data Sources for Oracle RAC

Does OIM OIM 9.1.0.2 BP07 support Weblogic JDBC Multi Data Sources (Services>JDBC>Multi Data Sources) for Oracle RAC instead of inserting the "Oracle RAC JDBC URL" on JDBC Data Sources for xlDS and xlXADS (Services>JDBC>Data Sources> xlDS|xlXADS > Connection Poll> URL) ?
If yes, is there are any other modifications that need to be made on OIM, or just changing the data sources?

Yes, it's supported. You install against one instance directly of the Rac Server. Then you update the config.xml file and the jdbc resource in your weblogic server with the full rac address. It is documented for installation against RAC. http://docs.oracle.com/cd/E14049_01/doc.9101/e14047/database.htm#insertedID2
-Kevin

"Master data attr. of" un change source of update rule.

hi,
What is the importance of following in "change source" (characteristics) in update rules.
1. master data attr. of
2.initial value
3. Source chars
4. constant
When and why these are used.
Thanks in advance.
Regards,
Avneet

Hi Avneet,
Lets say Material group is an attribute of 0MATERIAL. You cube contains Material and also Material Group as a separate characteristic (not as navigational attr) becasue you want to store the value of material group as it was during the time the transaction happened.
But here you transactional data coming from the source brings Material values, not values of Material Group. So in the update rule for Material Group, you can specify "Master data attribute of" 0MATERIAL. What the system will do is take the value of 0MATERIAL on this record and populate Material Group taking the value that is present in Material Master data.
So if Material = M100 and Material Group is MG01 in master data, it will supply MG01 to Material Group char in the cube.
Hope this helps...

Issue in OWB mapping - when changing source and target database

Hi,
I need help for resolution of the issue I am facing when moving mapping from development environment to QA.
Here is situation,
We develop ETL using one source, one staging and one target database.
In development we use one control_center for Source to staging and another control center staging to target.
All works fine in development.
Now I have created new runtime repository and imported all OWB projects (with full dependencies, exact replica of development). Now I need to change source and staging and target as different database.
I have created new database location connections and defined/attached DB connectors with stage and target location.
Now issues are
1.     Two Staging mapping are not able to bound with source table (giving different error
a.     One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
b.     Other mapping show error for source table/object not bound to repository
2.     All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
Not sure how to proceed from here.
I have recreated new repository and re-imported all project/mappings and defined all connection but still same issue.
Thanks in advance,
Vipin

1. Two Staging mapping are not able to bound with source table (giving different error
a. One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
b. Other mapping show error for source table/object not bound to repository
The above error were resolved when re-synchronized the table (for few I have to reimport the table) and mapping.
2. All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
The above error still pending. My target mapping are not able to deployed/compiled.
For the above I have defined one Staging location to one target target location and target location have connector to staging (not sure if I have to define connector name same as staging location, as I have created DB connector with different name but reference database is same as staging location).
Mapping are assoicated with desired data locatoin and meta data.
control center is also have that data location.
Mapping are configured for the desired location.

Data Type field read only in Data source for transaction data (PC_FILE)

Hi folks,
I need to change Data Type for some of the fields in "Field" tab in data source for transactional data. It became read only after I activate the data source. Need help in making it editable. All fields now have Data type=CHAR.
Thanks

Nevermind folks. I got it.

Switch data sources for only 1 table?

Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
tables to use the main data connection, but can't figure out how?
My logical guess would be in the table properties, but that's not it.
Any ideas?
TIA, ChrisRDBA

Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
tables to use the main data connection, but can't figure out how?
My logical guess would be in the table properties, but that's not it.
Any ideas?
TIA, ChrisRDBA
Hello,
If your three data connections from different database, I don't think we can combine three data connections into one in Tabular model design surface. If you need to only use one data connection for your Tabular model, please try to combine your underlying
tables into one database.
Please point out if I have something misunderstood.
Regards,
Elvis Long
TechNet Community Support
Thanks Elvis. As stated above, all tables reside in one DB.
TIA, ChrisRDBA

Does not allow to change source system in Variant

Hi Gurus,
I am creating a variant for the program RSIMPCUST, but it does not allow me to change source system name. It is showing me gray color. Do you how to fix this issue ?.
Thanks
Liza

Hello Liza,
Did you try my solution?
[Re: Change source system name in variant in BWQ]
There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
It's best to go for that solution I already provided to you...
Diogo.

Default text source for text tab in purchase requistion.

Hi,
issue is about text which pops up when someone try to create purchase requisition using me51n. some text shows up under Text-item texts-item text at document level.This text should not be populated when someone creates purchase requisition.can some one help in finding the source for that text and how to stop it popping up in purchase requisitions gong forward.
second part of this issue is. one buyer has reported the text shows up only when in change mode.once you save the requisition its gone. i have seen this on screen when creating requisition text is in text editor but once you save it its gone.another buyer who is responsible to create purchase order has reported they can see the text when converts it in to purchase order and by going in requisition text can be found.
last part of this problem is i can't see this all in quality system every time i create purchase requisition text editor is blank.i am creating service requisition so material master text is out of scope.
one thing i noticed when some one creates the requisition in text- item texts -there two texts items " text and material po text " that has a green Ok sign in corresponding Any text field
Thanks,

In standard, you can find the all links where the text is coming from.
Go to OLME-Purchase Requisition-Texts for Purchase Requisitions-Define Copying Rules
Here, select Item text and click on Text linkages. You will find the linkage from where the text is coming.
Second Part : Its quite not possible in standard, Check is there any development which is removing the text when you press save button.
Third Part: Yes. In standard, material PO text will come when you will use material in PR. Other than the field will show in your text line, but it will show blank.
The green tick mark shows when a text is successfully copied from any source.

Setting up csv files as a data source for Hyperion intelligence explorer on Windows 7

Hi. wondering anyone can point me to a resource or supply me with step son how to Set up csv files as a data source for Hyperion intelligence explorer on Windows 7?
I used to be able to do it in WXP, but it seems thing shave really changed with W7..... Absolutely desperate... All and any help welcome.....

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

Dynamic Sources for a field in Oracle Reports

Hi there,
I am sure someone might have encountered this problem.
I have six Queries in Data Model. Based on certain parameter value, I need to change the source field setting for each field in the report
output.
e.g in Report LayOut Model, I have a field F_1. The source for this field in
the Property pallette is COL1 which is coming from Query1.
I need to assign a new source based on parameter value for field F_1 to
COL2 from Query2 or COL3 from Query3 or COL4 from Query4, COL5 from Query5, COL6 from Query6 in the Before Report Trigger. Is there any way to achieve this using srw or any other PL/SQL code?
This way I can save a lot of devlopment time and use a single physical layout for six different reports and avoid the hassles of creating frames,
repeating frame and formatting.
Any help greatly appreciated.
Let me know if something is not clear in the email. I will provide
additional information

Ashok,
Looks like you've landed in the wrong Forum - this one is for Oracle HTML DB.
Thanks,
- Scott -

Changing source for HTMLDataSet

Similar Messages

Maybe you are looking for