How to change the jta-data-source for projects in EJB 3

Hi all,
Sorry my english! :)
I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
I explain:
In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
What kind of changes (workaround) I could make to solve this problem?
Thanks a lot!
Luciano

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

Similar Messages

  • How to create the generic data source for Labour costs report in BI (actual& plan costs)?

    Hello Guru's
    My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
    I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
    Please help on this to going forward.

    Hi,
    There are COOM data source which may suits your needs.
    please check data source
    0CO_OM_WBS_6
    0CO_OM_WBS_3
    Base tables are COSP and COSS.
    Check about coom data source, if not suitable then go for custom data source.
    About table cross verify with your source team.
    Thanks

  • How to change the default date in Person assignment tab?

    Hi experts,
    Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
    Thanks and rgs,
    Michelle

    Hi Michelle,
    Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
    Hope this is useful...
    Regards
    Aatish

  • How to change the contact sync settings for icloud? please advise

    how to change the contact sync settings for icloud? please advise?

    There are no settings to change. Assuming you are using Lion 10.7.2 (or 10.7.3) - which you should be - you simply sign in in System Preferences>iCloud and check 'Contacts' and any other data you want to sync.
    If you are using an earlier system you will not be able to sync your contacts, and there is no workaround. However you can sync them with Google or Yahoo contacts, though I don't know how well this works.

  • Why I cannot change the generated data source?

    Hello all,
    I have a generated data source from ODS, now I need to change something on it but the system only allow me to display it even I clicked the pen-glasses icon. Could anybody tell me how?
    Thanks
    Ryan

    Hi Ryan,
    You can't the generated data source from an ODS object, this is becasue ODS supplies delta from change log tables and the export data source / info-source structure should be same as of the change log table.
    However you can change the generated data source-info source assignment of info-cube.
    Hope it helps
    Thanks,
    Soumya
    Message was edited by:
            Soumya Mishra

  • How to change the posting date at the line item level in a sales order

    how to change the posting date at the line item level in a sales order

    Hi,
    I believe the POSTING DATE will appear on the accounting document
    In the Accounting document, the posting date will be based on the  Billing date.
    Please let me know if you need any more details
    santosh

  • How to change the Content-Transfer-Encoding for the fmddataa.fmd from base

    Dear all,
       When I using this SO_DOCUMENT_REPOSITORY_MANAGERto send email,I find the fmddata.fmd  file have been changed  to binary file attachment. I don't hope so.any one have good idea to avoid this case occur?
      Can you tell me how to change the Content-Transfer-Encoding for the fmddata.fmd from base64 to quoted-printable.  The quoted-printable is the Content-Transfer-Encoding for text file with extension .txt
    Best Regards,
    Merry

    Thank you

  • How to change the UWL refresh rate for all portal users.

    Hi Portal Experts,
    How to change the UWL refresh rate for all portal users?
    Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
    It was defaultically set to 5 mins for all users.How to change this to 20 mins.
    Thanks
    Sony.

    1.      Launch the UWL iView configuration page.
    You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
          From the Universal Worklist Systems, choose the system for which you want to edit the properties.
        Choose Edit.
    may be you can get clear help from below help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    regards
    nagaraju

  • Creating the text data source for 0OI_LIFNR(TD: Carrier (Number of vendor a

    Hi
    Have to create the text data source for this characteristic. Basically it is the same as 0Vendor here.
    I want to make it delta enabled.
    Am creating it on the view BIW_LFA1T(same as 0vendor)
    Can anyone advise what can I use to make it delta enabled without any code.
    Can I use numeric pointer like the 0Vendor_text.
    Many Thanks and regards,
    Kate.

    when defining a data source through the admin web page, don't add '!' in front of the password.
    ! is needed only when configuring a data source in the mapViewerConfig.xml file.

  • Finding the Generic data source for vendor master.

    Hi,
    I am trying to find the generic data source for 0VENDOR Infoobject on R3. But I am not able to find the exact match. Can any one help me? I just started on BW!!.
    Thank you

    Hi Tippireddy,
        you want to extract the vendor information through the business content then go through the following navigation...
      T.code RSA5 -> MM-IO (Master data Materials Management in general) -> 0VENDOR_ATTR or 0VENDOR_LKLS_HIER or 0VENDOR_TEXT these three are the standard data source for vendor.
    Regards,
    PRK

  • How to change the file type from IMOVIE PROJECT to other types of file

    how to change the file type from IMOVIE PROJECT to other types of file??
    thank you very much for your help=]

    I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
    Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

  • How to correct the birth date in Apple account? How to change the numerals to English for UAE location?

    I purchased iPhone 5S and opened new Apple account with preffered language English and location UAE. I was directed to enter my birth date with only Arabic language option. There was no way to change the language or skip the step. I had to enter an arbitrary birth date to go to the next step. How to correct the birth date now and change the numerals to English?

    Solution!!
    I was finally able to get the installer build to work, even though it takes about ten minutes!!  The network and CPU activity is minimal, so I don't know what LV is waiting on during all this time?
    For this installation it appears to be related to the directory structure created by the Volume License Manager 2.1 software.  There are two sets of users at my company, LabVIEW Professional and Developer Suite, which have different license numbers and installers.  The errors were related to source files located in the Products folder of the network distribution.  My installation expected the Products folder to be in a different location that it was actually placed by the VLM software.  I copied the entire Products folder from _SourceFiles up to the LabVIEW 8.5.1 folder and now it works, although very slowly.
    LabVIEW 8.5.1
    -->_SourceFiles
        -->Bin
        -->Device Drivers
        -->Licenses
        -->Products   (original location)
        -->Signal Express
    -->Dev Suite
    -->LV Pro
    -->Products    (manual copy)
    I hope this information may be of use to NI or other users.
    Message Edited by jrjones on 08-12-2008 03:21 PM
    Message Edited by jrjones on 08-12-2008 03:23 PM

  • How to change the posting date in UD stock posting for a HU managed item?

    Hi,
    We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
    I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
    Thanks & Regards,
    Madhavan Krishnamoorthy.

    I don't think you can.
    Craig

  • How to change the interval real substance for DG-Filling

    Hi,
    Im performing the filling process, to fill the dangerous goods master with data records from specification management. It seems that most data is transferred successfully. Although I receive the following error message in the import log.
    1. What does the interval means?
    2. What does the interval influence?
    3. How to change the interval in the following configuration object:
    EHS > Dangerous Goods Management > Interfaces: Filling and Distribution > Filling > Specify Assignment Objects for Filling
    4. How can I find out about which field it is about?
    5. Is this really required to change?
    Error message
    No data records available in interval real substance  through
    Message no. DGA402
    Diagnosis
    You attempted to fill the dangerous goods master with data records from specification management. However, no data records exist in the interval real substance  through real substance .
    System Response
    The dangerous goods master is not filled with data records.
    Procedure
    If required, change the interval limits.
    Thanks,
    Roy Derks

    Hi,
    pl. try with table TDG79, the fields as sources in specification management can be assigned to the fields as targets in the dangerous goods master. The default Customizing settings in the standard system within the scope of making filling more flexible guarantee that the filling process functions in the same way as in earlier version.
    in this table, options available for user exits in the table TDG79. for example, fill interval values or units that deviate from the standard units.
    Activities
    Edit the IMG activity Specify Assignment Objects for Filling in Customizing for Dangerous Goods Management.
    If u find complete solution, pl update the thread.
    with regards,
    mahesh.

  • How to change the capitalization date

    Hi ,
    I carried out WBS to AUC settlement on 31.12.2009, due to which AUC cap. date becomes 31.12.2009. Now i want to change the cap date to 01.12.2009. How do i do it? Reversing the settlement using CJ88 can only change the first Acq date but not the cap date. Also cap date is not an editable option in AS02.
    Reason for all this is that i want the cap date of fixed asset to be 01.12.2009.
    Regards,
    DP

    Hi Srinu,
    Thanks for your reply. Are there any implications of changing the cap date manually? Is it an advisable option or is it better to keep asset value date as 31.12.2009 and then post an unplanned dep for the asset.
    Regards,
    DP

Maybe you are looking for