Changing the Alert style Property Dynamically

hI..
Is there any way to change the Alert Style Property Dynamically.... if there please tell me its urgent
thnks in advance
Regards
Yashavanth

yes, u can change properties dynamically through set_alert_property and set_alert_button_property
here is an example
DECLARE
err_txt VARCHAR2(80) := Error_Text;
al_id Alert;
al_button Number;
BEGIN
al_id := Find_Alert('My_Error_Alert');
Set_Alert_Property(al_id, alert_message_text, err_txt );
al_button := Show_Alert( al_id );
END;

Similar Messages

How can I programatically change the Plot Style of a 3D surface?

I believe this can be done using a property node...however I am unable to find the property. At one point in my program, the plot style automatically switches to Points, and I want it to be Surface again later. I have a 3D surface reference wired to a property node, giving me the CWGraph3D properties. If the properties followed the menu style you get from right clicking on the 3d surface, I should be able to then select the property plots, and change the plot style. However, even though I can get a reference to the plot, the only property I can access is the count. I would appreciate it if someone could show me where I am going wrong, since Im confident this can be changed programatically.
Thank you!
Jeff
Using Labview 7 Express

Hi Jeff,
here's what I did (found somewhere in the examples that come with LabView):
Message Edited by GerdW on 03-14-2007 04:28 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
3dplot.png ‏9 KB

Change the button style in wdj

Dear all:
I want to change the button style in wdj application
When I change the “url to button design bar”to gif file,preview is fine
But emphasized buttons is old in wdj application
My EP versions is 7.4
Thanks in advance!!!
Regards
Blues

Hi Venki,
Thanks a lot for the reply.
If the OTR is static I can go and change text in the Transaction SOTR_EDIT. But in this scenario the button text changes dynamically according to the tab navigation on the Candidate profile page.
Say If I am in Education Tab, the first button will be the Work Expereince (previous tab name ) and Second button text will be Qualifcation (next tab name). Similary the button text changes when I am in Qualification tab.
I tried looking in the HRRCF_PROFILE for the OTR related to these buttons I could not find any.
Any suggestions to solve this will be higly appreciated.
Regards,
Sharad P.

How can I change the MESSAGE STYLE for messages?

My customer complains about the big "X", as well as he thinks it's an error instead of a just message or note.
so my question is how do i change the message style then?

You only get that when you have two or more consecutive messages. Try to avoid that is one option.
You can change the icon if you want. Create another icon, call it stop.ico and put it in the icons directory (as indicated by UI_ICON). However, if you have a STOP alert, the icon changes for that alert too.
Note: this is for Developer 6i. In 9i you cannot use ico files. Use gif files instead and put the image in the image jar file (found in OH/forms90/java directory). Since you see a big X, I believe you are using 6i.

Trouble with Slurs when Changing the Staff Style

Hello,
I'm exploring the LP8 score editor and find that it is VERY impressive!
My goal is to use Logic for everything, instead of having to dole out the score duties to Sibelius or Finale. After reading the manual, I've found that LP8 is designed for just that! With the display quantization settings and the other "tips" that it offered, the manual showed me that LP8's score editor is formidable indeed!
One issue (and maybe I missed this in the manual) that I'm having is changing the staff style for my parts. The manual says that this is an ideal way to print parts because you can change the key, transposition, etc. Writing for full orchestra, this seems (forgive the unintended pun) "Logical."
This issue I'm having is that my slurs do not move with my notes when I change the staff style. For example: let's say I have a theme in a MIDI region that is using the "treble" staff style. I have dynamics and slurs everywhere. Then I want to give this to an Alto Sax so I select the MIDI region and change the staff style to "Alto Sax." While the key signature and the notes change in a very "correct" looking way. The slurs I put in remain in their original locations. This is a bit discouraging because it means a lot of work to fix them before I can print the part out.
I've tried "selecting equal" events in the edit drop down menu. This almost works, but it does not discriminate between slurs up and slurs down.
If someone could please let me know what they do with slurs in general, and especially what they do when creating parts with them that would be great.
Thanks in advance!

Composer_25 wrote:
My goal is to use Logic for everything, instead of having to dole out the score duties to Sibelius or Finale. After reading the manual, I've found that LP8 is designed for just that! With the display quantization settings and the other "tips" that it offered, the manual showed me that LP8's score editor is formidable indeed!
I'm a HUGE advocate of Logic's score editor, but depending on the type of music you're writing you'll find that there are certain things that it just can't do. To this effect, there may be times when it will just be easier to send your music to a Finale/Sibelius copyist to put the finishing touches on your score/parts, i.e., those things that you must have in your score but which Logic can't do, such as wavy-line glissando markings for harp parts, tram marks (for separating systems on a conductor's score), alternative pedal markings for piano, etc. (up/down marks), and others.
Should you ever get to that point, check out a program called PDFtoMusicPro. It will take a PDF file from Logic and translate it into an XML file that can be read by Finale, etc., including slurs, key signatures, dynamic markings, etc. It's pretty fantastic!
This issue I'm having is that my slurs do not move with my notes when I change the staff style... \[snip]
Yup, it's a problem. The best approach is to use the transposing staff styles and do your markup on them. Of course, if you're preparing a C score then none of that matters.

Is there a way to change the alert tone for the find my iphone app?

Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

Welcome to the Apple community.
Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

I changed the alert phrase that usually says, "Excuse me, ____ needs your attention." And I need to change it back. It's cursing at me. :)

I changed the alert phrase that usually says, "Excuse me, ____ needs your attention." And I need to change it back. It's cursing at me.
I had changed this a long time ago, so I don't remember how. It was done on an older computer and carried over to my new one. I think it was done through the terminal...

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

How to change the text of label dynamically

Hi all,
I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!

Hi Wei,
AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
But, there is a way around.
You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
Have a look at these DEMO Code. You can have a good idea to implement the logic.
DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
Thanks,
Samantak.

How to change the text in JTextField Dynamically

i am trying to change the contents of JTextField dynamically like this
textfield.setText();but it is giving error...........how can i do it....

here is the code .....it is showing error in line 18 and 20 as identifier expected
their i am trying to make JTextField editable....
plz have a look
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import javax.swing.filechooser.*;
import javax.swing.SwingUtilities.*;
import javax.swing.filechooser.FileFilter;
//import javax.swing.JEditorPane;
import java.net.URL;
public class tm extends JFrame implements ActionListener
public JTextField[] programtext = new JTextField[30];
public JTextField[] tapetext = new JTextField[30];
tapetext.setEditable(true);
public JTextField[] statetext = new JTextField[30];
statetext.setEditable(true);
int count =0;
public static void main (String arg[]){
tm m=new tm();
m.setSize(1000,500);
m.show();
JButton loadp, run, step,loadi,loads;
public tm()
Container c ;
c = getContentPane();
c.setLayout(new FlowLayout());
loadi = new JButton("LOAD INPUT STRING");
c.add(loadi);
loadi.addActionListener(this);
loadi.setBounds(200,25,100,50);
loadp = new JButton("LOAD PROGRAM");
c.add(loadp);
loadp.addActionListener(this);
loadp.setBounds(300,25,100,50);
run = new JButton("RUN");
c.add(run);
run.addActionListener (this);
run.setBounds(400,25,100,50);
step = new JButton("STEP");
c.add(step);
step.addActionListener(this);
step.setBounds(500,25,100,50);
loads = new JButton("LOAD STATES");
c.add(loads);
loads.addActionListener(this);
loads.setBounds(600,25,100,50);
JPanel prog = new JPanel();
prog.setLayout(new GridLayout(30,1));
for(int i=0;i<programtext.length;i++)
programtext= new JTextField(10);
prog.add(programtext[i]);
JPanel tape = new JPanel();
tape.setLayout(new GridLayout(30,1));
for(int i=0;i<tapetext.length;i++)
tapetext[i]= new JTextField(10);
tape.add(tapetext[i]);
JPanel state = new JPanel();
state.setLayout(new GridLayout(30,1));
for(int i=0;i<statetext.length;i++)
statetext[i]= new JTextField(10);
state.add(statetext[i]);
JPanel contentPane3 = new JPanel();
contentPane3.setBorder(BorderFactory.createEmptyBorder(50, 50, 50, 50));
contentPane3.setLayout(new BorderLayout());
contentPane3.add(state, BorderLayout.CENTER);
contentPane3.add(c, BorderLayout.NORTH);
contentPane3.add(prog, BorderLayout.WEST);
contentPane3.add(tape, BorderLayout.EAST);
setContentPane(contentPane3);
public void actionPerformed(ActionEvent e)
try{
if(e.getSource ()==loadp)
JFileChooser chooser=new JFileChooser();
int r= chooser.showOpenDialog(this);
if(r==JFileChooser.APPROVE_OPTION )
String name=chooser.getSelectedFile().getName();
File f=chooser.getSelectedFile();
FileInputStream filestream = new FileInputStream(f);
BufferedInputStream bufferstream = new BufferedInputStream(filestream);
DataInputStream datastream = new DataInputStream(bufferstream);
String record = null;
programtext[0].setText("");
try {
int i = 0;
while (true)
record=datastream.readLine();
if(record == null){
break;
programtext[i].setText(record);
i++;
count = count + 1;
System.out.println ("the no of lines of the program are"+ count);
catch (Exception p)
System.out.println(p);
else if(e.getSource()==loads)
JFileChooser chooser3=new JFileChooser();
int r3= chooser3.showOpenDialog(this);
if(r3==JFileChooser.APPROVE_OPTION)
String name=chooser3.getSelectedFile ().getName();
File f3=chooser3.getSelectedFile();
FileInputStream filestream3 = new FileInputStream(f3);
BufferedInputStream bufferstream3 = new BufferedInputStream(filestream3);
DataInputStream datastream3 = new DataInputStream(bufferstream3);
String record3 = null;
statetext[0].setText("");
try {
int i = 0;
while (true)
record3=datastream3.readLine();
if(record3 == null){
break;
statetext[i].setText(record3);
i++;
catch (Exception p3)
System.out.println(p3);
else if(e.getSource()==loadi)
JFileChooser chooser2=new JFileChooser();
int r2= chooser2.showOpenDialog(this);
if(r2==JFileChooser.APPROVE_OPTION )
String name=chooser2.getSelectedFile().getName();
File f2=chooser2.getSelectedFile();
FileInputStream filestream2 = new FileInputStream(f2);
BufferedInputStream bufferstream2 = new BufferedInputStream(filestream2);
DataInputStream datastream2 = new DataInputStream(bufferstream2);
String record2 = null;
tapetext[0].setText("");
try {
int i = 0;
while (true)
record2=datastream2.readLine();
if(record2 == null){
break;
tapetext[i].setText(record2);
i++;
catch (Exception p2)
System.out.println(p2);
else if(e.getSource ()==run)
String temp="";
String statetemp=" ";
String tapetemp=" ";
int l=0;
int tp=0;
String pars[][] = new String[50][5];
     for(int m=0;m<count;m++){
temp = programtext[m].getText();
String str[]=temp.split(" ");
for(int k=0;k<5;k++){
pars[m][k] =str[k];
System.out.println(pars[m][k]);
statetemp = statetext[0].getText();
tapetemp = tapetext[l].getText();
while(pars[tp][0]==statetemp && pars[tp][1]==tapetemp && tp><count)
     statetemp = pars[tp][2];
     tapetemp = pars[tp][3];
     statetext[0].setText() = statetemp;
     tapetext[tp].setText() = tapetemp;
     if(pars[tp][4]=="R")
     l=l+1;
     else{
     l=l-1;
     tp++;
else if(e.getSource()==step)
catch(Exception t)
System.out.println(t);

How to change the TAB style of an application

Hi,
I have an application which was initially created using "One Level of Tabs". Now we require "Two Level of Tabs".
Is there some way of changing the Tab style of the application.
Thanks in advance,
Monika

Just forgot to mention that i want the already existing tab set to become the Parent tab set and then i should be able to create the standard tab set for each of the tabs in the parent tab set.
Thanks in advance
Monika

How to change the component styles (inside panelFormLayout.)

Hello friends,
Can anyone help me, How to change the component styles where components (af:inputtext) inside af:panelFormLayout.
i changed all of the components one by one style, inlinestyle .. from the inspector. By result is nothing.
how to extend blafplus-rich and override some of the components style?
thanks for your helps

thanks alright but i want to learn again after this.
Which component has a content or border or how can i find list components attributes for change style?
For example i want to change document content pane, what will i write to css. i am little knowledge about css.
Thanks for help

Problem while changing the JSplitpane in a dynamic way.

Hi Everyone,
In my application i'm changing the jsplitpane in a dynamic way.i'm posting the sample code thatz giving problem.Kindly compile and execute this.In the first frame i've done a split of two parts. The top component has got the name of the application and the bottom component has got some links related to that application. If the user click on this link ,i'm capturing the bottom component alone from the original splitpane and i'm breaking that into another split.
upto this every thing works fine.Now the problem is when ever the user click on that link it'z capturing that event and doing consecutive split on the bottom frame.But i need that paricular split that user has already got to be repainted for all the time when user click on the link.Eventhough i've captured the main splitpane object in some other variable and assiging the same to the second window when user click on that url.But itz not recognizing that.
Kindly some one help me to resolve this.
import java.awt.Color;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.GridBagLayout;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.util.Vector;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JSplitPane;
public class Test2 extends JPanel // implements KeyListener
    static Vector<String> arrAppName = new Vector<String>();
    public static JSplitPane splitPane,splitPane2;
    public void AppWin(final JFrame frame)
        Container contentPane = this;
        GridBagLayout gb = new GridBagLayout();
        contentPane.setLayout(gb);
        arrAppName.add("link");
        JLabel lab = new JLabel("<html><font color=#6698FF><a href>" + arrAppName.get(0) + "</a></font></html>");
        contentPane.add(lab);
        JScrollPane listScrollPane = new JScrollPane(contentPane);
        JLabel label = new JLabel("APPLICATION REPORT", JLabel.CENTER);
        Font font = label.getFont();
        Font font3 = font.deriveFont(25.0f);
        label.setFont(font3);
        label.setFont(label.getFont().deriveFont(Font.ITALIC));
        label.setHorizontalAlignment(JLabel.CENTER);
        label.setForeground(new Color(0x736AFF));
        JScrollPane labelScrollPane = new JScrollPane(label);
        labelScrollPane.setVisible(true);
        // Create a split pane with the two scroll panes in it.
        splitPane = new JSplitPane(JSplitPane.VERTICAL_SPLIT);
        splitPane.setTopComponent(labelScrollPane);
        splitPane.setBottomComponent(listScrollPane);
        splitPane.setDividerLocation(100);
        Dimension minimumSize = new Dimension(100, 50);
        listScrollPane.setMinimumSize(minimumSize);
        labelScrollPane.setMinimumSize(minimumSize);
          splitPane2= new JSplitPane();
          splitPane2=splitPane;
        lab.addMouseListener(new MouseListener()
            public void mouseClicked(MouseEvent arg0)
                displayMainFrame("link", frame);
            public void mousePressed(MouseEvent arg0)
            public void mouseReleased(MouseEvent arg0)
            public void mouseEntered(MouseEvent arg0)
            public void mouseExited(MouseEvent arg0)
    public void buildWindow(String link, JFrame frame)
        Container contentPane = this;
        GridBagLayout gb = new GridBagLayout();
        contentPane.setLayout(gb);
        JLabel label = new JLabel("Next Screen", JLabel.CENTER);
        Font font = label.getFont();
        Font font3 = font.deriveFont(25.0f);
        label.setFont(font3);
        label.setFont(label.getFont().deriveFont(Font.ITALIC));
        label.setHorizontalAlignment(JLabel.CENTER);
        label.setForeground(new Color(0x736AFF));
        JScrollPane buildWindowtop = new JScrollPane(label);
        buildWindowtop.setVisible(true);
        contentPane.add(buildWindowtop);
       /*assigning the main split pane object for all the consecutive call*/
        splitPane=splitPane2;
        JSplitPane splitPane1 = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
        splitPane1.setTopComponent(splitPane.getBottomComponent());
        splitPane1.setBottomComponent(contentPane);
        splitPane.setBottomComponent(splitPane1);
        splitPane.setOneTouchExpandable(true);
        splitPane.setDividerLocation(100);
        Dimension minimumSize = new Dimension(100, 50);
        buildWindowtop.setMinimumSize(minimumSize);
        splitPane1.setMinimumSize(minimumSize);
    } // end printing rows
    public static void displayFrame(String tname, JFrame framedisp, String buttonName, String tranCorrID,
        String buttonOption, JSplitPane buildSplit)
        Test2 mainDispPane = new Test2();
        framedisp.getContentPane().add(splitPane);
        framedisp.setVisible(true);
    public static void displayMainFrame(String link, JFrame framedisp)
        Test2 mainDispPane = new Test2();
        mainDispPane.buildWindow(link, framedisp);
        framedisp.getContentPane().add(splitPane);
        framedisp.setVisible(true);
    public static void main(String[] args)
        JFrame frame = new JFrame("MAIN WINDOW");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Test2 mainPane = new Test2();
        mainPane.AppWin(frame);
        frame.getContentPane().add(splitPane);
        frame.setSize(1280, 1000);
        frame.setVisible(true);
    } // end main
} // end Test2Thanks in Advance,
Siva.

anybody can help me this regard?

Changing the Target data store dynamically

Hi,
I have a requirement to load same kind of data into 12 different target tables. Client maintains data in period vise, i.e. Jan data in a table TABLE_01, Feb data in TABLE_02, Dec data in TABLE_12 etc. The structures of all these tables are same.
My program will process only one period’s data at a time and processed data will be loaded into a table TABLE_SRC. After this, according to the processing period, I need to post the data into the target tables TABLE_01, TABLE_02 etc. i.e. if the data is for period Jan then to TABLE_01, data is for period Feb then to TABLE_02 and so on.
For accomplishing the same, I need to create 12 different interfaces. So is there any way to accomplish the same using a single interface by changing the target data store dynamically? I am looking for a solution other that creating procedures.
Any Help is appreciated.
Thanks in advance.
DJ

Yes, it is possible....
1) at the target datastore use a variable at resource
2) create a query that returns all target tables in a source tab (procedure step)
3) at target tab, call the interface scenario send the query result as parameter.
That will allow you execute the same interface for disitnct targets.
Does it help you?

My iphone calendar keeps changing the alert and second alert times I put in

Ever since updating to 7.0.2, my Iphone calendar keeps changing the alert and second alert times I input for an event to different times. Why is it doing this and how can I fix it?

Are you syncing your phone with iTunes and then with iCloud? This can cause duplicates. Sync with one or the other, but not both.

How can i change the conversation style in mailbox

Hi i would like to know if it is possible to change the conversation style in the mailbox for i phone 5

Hey JoefJo,
Thanks for the question. Based on the information you have provided, it sounds like you wish to configure the Organize by Thread setting located in Settings > Mail, Contacts, Calendars > Organize by Thread:
Mail settings - iPhone
http://help.apple.com/iphone/7/#/iph5ca4d6a69
Thanks,
Matt M.

Changing the Alert style Property Dynamically

Similar Messages

Maybe you are looking for