Changing the default jdk images

Hi ALL,
Could any one please tell me where are the default jdk icon images stored for example the jchechbox etc. Can i replace any of the images for example if i want to change the default JCheckBox image,can i do that ?
Thanks,
Viral Doshi

Hi Torgil,
I am actually trying to get the checkbox icon exactly
as it is shown in the windows os(Which has a white
background and a black tick).Now even if i use the
windowslookandfeel of swing ;it is painting an icon
which has a gray background and a black tick).On my machine the windows look and feel paints Swing checkbox icons are identical to Windows own checkboxes (white background, black tick). How do you set the look and feel?
I am
able to paint the background white but i don't want
to do that.I can use other images for the icon but
again it involves a performance issue.
What makes you think the performance would be noticably affected? Have you tried it?
Is it possible by any means to show the exact windows
icon wihtout painting and setting icons.? Is it
possible to use native methods to call MFC components
like a windows checkbox ? How will affect
performance. ?I'm sure you can do that, but I'm afraid I have no idea how.

Similar Messages

How to change the default BC image that shows in the address bar?

Does anyone know how to change the default BC image that shows in the address bar? I want to swap it out so the client logo shows next to their URL.
Thank you!

Hi,
If you are trying to change the favicon for your site,
You can do it from Site Manager-> Page template -> Default Template
Look for the code <link type="image/x-icon" href="/Path for your image" rel="icon" />, and Click save.
Now where you will use this template, it will display your favicon for that webpage instead of BC favicon. You can define it on Page directly if you are not going to use template.
Please let me know if you have any doubt.

How can I change the default cover image in iTunes?

Good evening everyone!
I've scoured the web for this info but can't seem to find it. Is there a way to change the default cover image in iTunes to one of my choosing? You know the one I'm talking about right? The transparent CD cover with the musical note in the middle of it... the one that shows up when iTunes can' find appropriate cover art for your music. I have another image I'd like to use instead, as I've never liked the default image at all. The one I have to replace it is an image of a blank CD case. Kinda cool and would look infinitely better than the default in my opinion.
Has anyone done this before? If so, can you describe to me how it's done, or point me to somewhere on the web that describes how? Many, many thanks in advance Have a great weekend!!!

I understand what you mean - I too, would like to see some variability in the 'default'. Besides having a single default, I would step that up to a default that changes with genre and media: ie. I could see using a sax for Jazz; a microphone for a Podcast, etc.
I don't have the answer to your question yet, but I think I'm going to crack open the iTunes package to see what default images there are embedded in there.

How to change the default JAD Icon image in JStudio

Dear friends,
I have one dought,how to change the default icon JAD image in jstudio application.Its very important to me.And one find answer please tell .

Dear friends,
I developed one application in jstudio.And need to set an special icon for my application.While i download my application in to mobile. The icon should be displayed in the mobile.To show my application as unique from other applications.But i dont know how to set an icon for my application. If any one find answer please reply as soon as possible.
Thank you

How do i change the default image rulers from cm to pixels?

Im having an issue with PS CC 2014. I am not able to change the default setting when I create a new image. It is currently set to cm and I would like it in pixels. I have gone to:
Photoshop > Preferences > Units & Rulers and changed the settings but it always defaults back to cm. Is this a known glitch or am I doing something wrong?
Thanks
Dizl

Are you talking about the units in the File - New dialog, then? Seems to me that one will remember whatever you last successfully used.
If you do File - New, then set the units to Pixels, and actually complete the dialog (creating a new document), I believe that's what you'll get next time. Is that not happening for you? I just tested it here and it puts up whatever units I used last.
I don't know if Mac vs. PC might make a difference. I'm on PC.
-Noel

HT2506 How do I change the default image editor from Preview to Graphic Converter?

How do I change the default image editor from Preview to Graphic Converter?

I'm assuming you want the default programme to change from Preview to Graphic Converter so that clicking on the file would open Graphic Converter instead of Preview.
Control click on the file type that you want to open using Graphic Converter. Press Command+I for Get Info. Click on the triangle next to Open With. Select Graphic Converter and Press Change All...

Can you change the default image capture program in RH8?

Can you change the default image capture program in RH8? I have used Snagit for sooo many years and I would like to use it by clicking the Caputre button. I know how to change it to edit pictures with Snagit (Tools > Options > Associations), but not to capture.

Looks like a feature request.
Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Palete Image trace: How to change the default settings for icon?

Hi!
New palette and action Image tracer is a good step forward and work better, thank you.
This palette has a built-in icons, which significantly accelerate the selection. How do I change the default action?
I know that you can save presets, but this is different. The icons are even faster and more practical.
eg I want to icon B & W automatically have enabled the option "Ignore White".
Best Regards!

No, there's no way to do that, and that's because Lightroom works best as a single catalogue. You have metadata fields like Job which can track individual assignments.
What you could do is create an empty catalogue with settings as you want, then copy the file each time you want to set up a new catalogue.

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

How to change the default up arrow in OBIEE Answers

Hi All,
I want to change the default blue up arrow with a green up arrow in OBIEE answers. How to do it?
Regards,
Soumitra

Do you mean the condition formatting options ? If so I had a similar requirement to create a Green up arrow and an orange 'sideways' arrow. I did the following, all based on a default Windows install using OC4J :
Navigate to :
C:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\meters\arrow\tri\
I copied up.gif to upgreen.gif and change the colour in a image editor.
I coped up.gif, rotated 90 degrees, changed colour to orange and saved this as sideways.gif
I copied the two new files into the Web services stye folders also :
C:\OracleBI\web\app\res\s_oracle10\meters\arrow\tri
restarted OC4J and presentation services and they are now available in the conditional formatting options, alongside the defaut Blue (up) and red(down) arrows.
** I believe the new pictures need to exist in any other style folders that you are using, e.g "s_hyperion", "s_oracle10", s_custom if you've done your own.

How to change the default orientation?

Hello,
     I'm new to Adobe Flash Builder and I am currently making a mobile application for a school project. I was wondering how you change the default app orientation to landscape. I've tried going into my app.xml and change the aspect ratio to landscape with no luck, and it is very hard to find any answers on the internet. I would greatly appreciate your help.
HomeView.mxml Code:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    actionBarVisible="false" tabBarVisible="false" title="HomeView">
          <fx:Declarations>
          </fx:Declarations>
          <s:Image left="0" right="0" top="0" bottom="0" scaleMode="zoom" smooth="true"
                               smoothingQuality="high" source="@Embed('file:///C:/Users/Owner/Downloads/48127-solarsystem-teaser.jpg')"/>
          <s:Button x="-5" y="0" width="410" height="1504"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Sun)"/>
          <s:Button x="444" y="852" width="80" height="80"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Mercury)"/>
          <s:Button x="628" y="742" width="120" height="124"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Venus)"/>
          <s:Button x="836" y="632" width="127" height="117"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Earth)"/>
          <s:Button x="994" y="506" width="99" height="96"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Mars)"/>
          <s:Button x="1255" y="464" width="298" height="279"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Jupiter)"/>
          <s:Button x="1626" y="302" width="274" height="270"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Saturn)"/>
          <s:Button x="1965" y="196" width="175" height="174"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Uranus)"/>
          <s:Button x="2201" y="66" width="175" height="174"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Neptune)"/>
</s:View>
App.xml code:

                    
                    
                    
I need to make it so that the app is permanently in landscape.
Thanks again.
     8th grade student



In XML, everything within  is a comment. You need to remove the :
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>

Changing the default /Users location

Hey guys,
does anyone know a smart way to change the DEFAULT location of /Users in SL?
I wan't to create a system image with /Users on a second partition,
and i'm not talking about just ctrl-clicking an existing user and editing
the account prefs
Worked fine in 10.4 with NetInfo and in 10.5 with fstab/vifs.
10.6 anyway always creates an alias to /Users,
which i don't want because it makes our software-distribution go nuts.
Any ideas?
Would appreciate it...

I edited /etc/fstab using vifs and added:
/dev/disk0s3 /users hfs rw 1 2
This is exactly what i did in 10.5 as well.
SL mounts /users to the other partition just fine,
but additionally it creates a link to /users on the system partition as well.
I.e., on the system partition i have Applications, Library, System and so on
AND a link to /user. That didn't happen in 10.5
On the second partition i have all the users folder, just how i wanted it.
I'm just curious why SL automatically creates that link
when i change the mountpoint of /users.

How to change the default library size...

I have a PowerMac G4 with 1.25ghz and 1.25gig memory. I also have about 7500 photos, a total of about 10 gig, with about 1/3 taken with a Nikon D70. As you might guess, iPhoto (and only iPhoto) is really slow to open and close...I get the beachball for a minute or so before anything happens.
In reading topics surrounding the slowness of loading/closing iPhoto, one person suggested changing the default size of the iPhoto library...but they didn't say how? I'm assuming that this changes it so that the system doesn't need to show the whole library? This isn't just viewing the pictures as large pictures instead of thumbnails is it?
Any help would be appreciated....also, if there is another solution I'd love to hear about it.
Thanks,
Tom

Thomas:
As you've read the problem comes from your Nikon camera and the MakerNotes it creates and adds to each image file. I believe you're referring to splitting up your library into smaller sub libraries. That can be done by making a duplicate of your current library, call it Lib1. Then open Lib1 with iPhoto and delete all the photos but those you want in that particular library. Make another duplicate of the original library, Lib2, and repeat the process. That way you'll have multiple smaller libraries that you can manage with either iPhoto Buddy or iPhoto Library Manager.
Eric Lindsay developed applescripts to remove the MakerNote information from the Library.iPhoto file which gets the speed back up to what it should be. However, any new imports from the Nikon will add MakerNotes.
OT

On my macbook pro, where is the file for the original default desktop wallpaper? ...and if i replace this will it change the default wallpaper?

Whenever I lock my screen on my mac (by closing the lid) the login screen I see on reopening my computer is a faded version of my desktop image (which is normal, and fine) however when I close my laptop while it's in fullscreen mode (when I'm using a web browser or other application in full screen) the lock screen displays the default desktop image, which is what i'm trying to change. My macbook has always done this.
My computer is running Mac OS X version 10.7.3
I've been looking for a way to change the default wallpaper on my mac, so that when i lock my screen in full screen mode the lock screen displays my selected wallpaper image (the same one as is on my desktop) instead of the default (andromeda galaxy). Can anyone please provide me with the location of the default image file (if it's even accessible) or maybe even provide me with a way to fix this? Any help is greatly appreciated!

Hi Mr. Wog,
My guess is that once you see an estimate for replacement for hundreds of dollars, those scratches won't look too bad anymore. There are products to cover the outer casing, and some people put stickers on, or even paint (I don't recommend either, but ymmv). Good luck.

How can I change the default driver to OracleXADataSource in JDeveloper

Hello,
How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
And because of the JMS server I need an XA driver.
I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
Thank you.

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

Changing the default jdk images

Similar Messages

Maybe you are looking for