Changing the multicast Address and Port giving error

I am using Coherence 3.3.1 jar files (Coherence.jar and tangosol.jar) in my local application. But when I try to change the multicast Address and Port in tangosole-coherence.xml(in Coherence.jar) then it is giving this error -
"This member could not join the cluster because of an incompatibility between the cluster protocol used by this member and the one being used by the rest of the cluster. This is most likely caused by a Coherence version mismatch, or by mismatched protocol filters (e.g. compression, or encryption)"
If i am using unique IP and Port then how can it be in a Cluster as this error stating. Please reply ASAP.

Hi,
There is a good chance that there is already the IP and port is being used by another cluster (which uses different versions of jars or configurations) and hence, when you are starting your cluster, throwing the error.
Can you double check if another cluster is already using it or not ?
Thanks,
Amit

Similar Messages

API method to query multicast address and port of a cluster

I am new to Tangosol and I'm looking to write a quick Java dashboard that will display current information on our cluster, such as the clustername and the multicast address and port that is being used. Looking at the API I've found the Cluster object and I'm able to get the memeberset and the clustername.But I have not been able to find a way to query the multicast address and port being used by the cluster.
     Any help or links would be appreciated.
     Thanks,
     Len

Hi Len,
     All this information could be retrieved via JMX. Please see this Wiki page. Detailed documentation about the semantics of all exposed attributes and method could be found in the Javadoc for the <a href ="http://tinyurl.com/r75sy">Registry interface</a>.
     Regards,
     Gene

HT1918 So I changed my email address and got an error "invalid year" Any clues?

So I changed my email address and got an error "invalid year" Any clues?

Hi Stapleton2137,
This sounds like an issue with your security settings for your Apple ID.
If you are having issues with your Apple ID, the two articles below will help:
Frequently asked questions about Apple ID
Apple - Support - Apple ID - Manage Account
Cheers,
Judy

Getting the IP address and port number and placing it in a window

Hi Everyone,
I have written the code which gives the system time in a window. But I need also to have the Internet address and the port number of the client in the window. the TimeserverRF considers incoming DatagramPackets as a request for the current time, if the client wishes to receive the current time from TimeserverRF, it has only has to send a DatagramPacket to TimeserverRF.
I am not sure how to do this writing DatagramPackets .
I have the TimeClient class application. Timeclient should send the Internet address and the port on which it is running.
Do You have any ideas.
// the code for system time.
import javax.swing.*;
public class Window1 {
public static void main(String[] args) {
JFrame win = new JFrame("TimeServer running on port 9999");
JTextArea tA = new JTextArea(1, 30);
win.getContentPane().add(tA);
win.pack();
win.setVisible(true);
String s1; // initialise variables
TimeData t1; // TimeData object initalise to t1 variable
t1 = new TimeData(System.currentTimeMillis()); // start of loop body
s1 = t1.toTimeString(); // system time held sring s1
tA.append("Sent "); tA.append(s1); // Prints statement and time in Frame
}

Study this networking tutorial and then, if you have a specific question, create a new post with it.
http://java.sun.com/docs/books/tutorial/networking/index.html

I have changed the IAS ServerName and port, The BPEL PM didn't work now!

when i install the soa suit, I don't have a registered DNS name.
So I set a invalid domain name for it .
Now I want public this application, So I changed the ServerName as a public and fixed IP, and modify the port 7777 with 80.
All application running OK but BPEL.
What can I do know.Thanks for any help!

Hi
chgiphost is your friend:
http://download-east.oracle.com/docs/cd/B31017_01/core.1013/b28940/host.htm#BHBBJEBF

Where is the server address and port stored that is configured in NI License Manager?

Hi,
I am trying to configure a silent installation of LabView. I have tried the specfile and put in the license code etc.. I cannot see a place there to configure a license server address.
I've run NI License Manager on a reference PC and have configured one there but how can I deploy that config to a number of PCs? How is it stored and where is it stored?
thanks
Paul

Last question (I promise)
If I dont have a volume license how do I determine what my 'package' or 'family' is?
Package
Syntax: nilmUtil.exe -activate "packagename version"
Example: nilmUtil.exe -activate "LabVIEW_PDSM_PKG 8.0500"
Family
Syntax: nilmUtil.exe -family "family"
Example: nilmUtil.exe -family "LabVIEW_ADE_080600"

I need to change the email address and upgrade my subscription

I didn't realize that I have two accounts with Adobe, let's say email A and email B. Now my subscription is saved under email B. I want it to be moved to email A and when it's been done successfully, delete email B. Also, I want to upgrade my account from single purchase to complete. I have been trying to chat with your team since last night and tried all day today but no luck!

Hi There,
Kindly contact our support team via: Contact Customer Care
Here is what you need to do.
Cancel the subscription under B, purchase a new subscription under A.
If you do not want to use email B, you can leave it as it is. It can also be disabled and after doing that it cannot use B ever again.
Thanks,
Atul Saini

Trying to set up my time capsule to my friends dsl modem so I can get wireless. I kept on getting message another device is using the same IP address, so I manually changed the IP address and now I have no Internet via DSL modem or wireless

Help with trying to set up my time capsule to my friends DSL modem, so that I can get wireless while staying at his place.

Set up your Wi-Fi network with your iPad, iPhone, iPad touch, or Mac.
http://www.apple.com/airportexpress/features/easy-setup.html

Changing IP Address and ports in Directory Server 5.1 SP 4 and 5.2 SP4

I have installed multiple instance of Sun Directory Server 5.1 and 5.2 on ports 389 and 390,now I want to change the IP Address and ports, I am able to change the directory server port from 389 by editing the dse.ldif file, now I want to change the port 390 and the IP address same as directory server, can someone expert from the forum guide me.
Thanks in Advance.
Mukesh Kumar

1) I don't know what you've typed in when installing... but I've never seen that message. Are you using any language specific characters ?
Do you get the error after this screen ?
<b>
The suffix is the root of your directory tree. You may have more than
one suffix.
Suffix [dc=sun,dc=com]:
</b>
If yes, then this means that the value you typed in is not a valid DN... and you must enter a valid one.
2)The Directory Server is installed under /usr/iplanet but the database is under /var/iplanet/ds5 and configuration is under /etc/iplanet/ds5 ...
You can use symbolic links if you want to move things around.
3) You mean you downloaded the tar.gx file of iDS 5.1 and install it on Solaris 9... No problem, I do this every day. As long as you have right to create directories and files, you should be able to install as anyone. If not, you should install as root and then let the server run as a special user.
4) Solaris 9 comes with iDS5.1 packages already installed. But the server is not configured at all.
Running directoryserver setup allows you to configure it and create the database, accounts...
Running directoryserver uninstall remove the instance of the installed database... It doesn't remove the packages. You can start again a setup...
By the way, I think that iDS 5.1 on Solaris 9 comes with the full documentation... May be you should start by reading it.
Regards,
Ludovic.

Changing the IP address in solaris 10 and setting up networkconnection

Hello,
I need to change the IP address and make it avaliable to the network. I have changed the below file
# IP -> /etc/hosts
# Netmask -> /etc/netmasks
# Gateway -> /etc/defaultrouter
# IP (again) -> /etc/inet/ipnodes (This is new in Solaris 10)
# DNS Servers -> /etc/resolv.conf
But while rebooting everything gone. What could be the reason?
I have changed the name using the uname -S <domain name> changes reflected but once I reboot everything gone.
I need to change my keyboard from US to Finnish, I have used kbd -s then selected 8 for finnish, but still my keyboard settings was not reflected.
Can anyone plese send me some like to setting up IP,domain name,subnet,etc.
Thank you

nsdh123 wrote:
Hello,
I need to change the IP address and make it avaliable to the network. I have changed the below file
# IP -> /etc/hosts
# Netmask -> /etc/netmasks
# Gateway -> /etc/defaultrouter
# IP (again) -> /etc/inet/ipnodes (This is new in Solaris 10)It's not new in Solaris 10, but populating the hostname in it is. In later versions of Solaris 10, it is just a symlink to the hosts file.
# DNS Servers -> /etc/resolv.conf
But while rebooting everything gone. What could be the reason?Everything gone? So all the files you edited were reverted back to the previous version? If so, it sounds like something is wrong with the drive or the filesystem.
I have changed the name using the uname -S <domain name> changes reflected but once I reboot everything gone.
# man uname
     -S system_name
           [...] This change
           does not persist across reboots of the system.Either use sys-unconfig or edit /etc/nodename. Even if you don't use sys-unconfig, you might check the man page and see the files it mentions.
Darren

Ias 10.1.2.3 glitches in chgiphost to change the IP address

RHEL 4, Kernel 2.6.9-67.0.1
After recently patching our ias from 10.1.2.2 to 10.1.2.3 we did in depth testing on our developement server.
After that we copied the whole server (VMware virtual machine) to our test server.
On this test server I changed the IP address and the hostname.
I tried to use the tool chgiphost.sh to reflect the changes to the ias aswell (like done several times before on the old ias 10.1.2.2).
I got the following error:
su - ias10g
cd chgiphost/scripts
./chgiphost.sh -mid
chgiphost.sh -mid
Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/ias10g/chgip/lib/libpass.so: ... ELF file data encoding not little-endian
I found, that the shared object is not suitable for the Intel server.
cd
cd chgiphost/lib
file libpass.so
libpass.so: ELF 32-bit MSB shared object, SPARC, version 1 (SYSV), not stripped
After copying this shared object from the old ias 10.1.0.2, it looks like this:
file libpass.so
libpass.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
I tried again to change the IP address.
I still got errors, but it looks like it worked. I can call all my Form dialogforms
Any idea, what might have caused this error?

My error while running chiphost is Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/ias10g/chgip/lib/libpass.so: ... ELF file data encoding not little-endian
While the bug 7000666 refers to the following:
Exception in thread "main" java.lang.UnsatisfiedLinkError: Can't find library pass (libpass.so or .so) in sun.boot.library.path or java.library.path
sun.boot.library.path=<path_to_oracle_home>/jdk/jre/bin
java.library.path=<path_to_oracle_home>/jdk/bin:<path_to_oracle_home>/jdk/jre/bin/classic:<path_to_oracle_home>/jdk/jre/bin:<path_to_oracle_home>/bin:<path_to_oracle_home>/lib32:<path_to_oracle_home>/chgip/lib:<path_to_oracle_home>/jdk/jre/bin/sovvm:/usr/lib
I am also running OAS 10.1.2.3 on linux virtual machine.
Is this patch also suitable for me?
Amir

Client's IP address changed. How do I change the ip address on my computer?

I only have one client, the computer my sons use in another state. Everything worked fine until they moved. Now they have a new IP address. When I select the client from ALL COMPUTERS, a dialog box opens labeled ATTRIBUTES with an option to EDIT. However, when I change the IP address and the DNS, only the DNS info stays in the dialog box if opened again. Neither the IP address or the DNS info is reflected in the client's entry in ALL COMPUTERS. The status remains OFFLINE even when phone contact with the client verifies the computer is on and connected to the Internet using the same IP address. Alternatively, I used the Scanner. Remote Access finds the IP address plus the ISP web address, but attempts to connect fail. I suspect there is a way for me to properly change the IP for the client since all other info is the same. I searched the user manual and info online but can not find any info that specifically address the above situation. Both computers are Macbooks.

yes you can just watch this video and i show you how during the video
http://www.youtube.com/watch?v=Ph8Cj3Jetac

How to determine which IP address and port is used to make DNS queries?

I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
all the requests are sent.
When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
How can I specify the IP address and port to use for my client???
Thanks for your help.

I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.

Essbase1113 IP Address and Port Questions

hello,
everyone, i'm puzzled on a question about essbase.
it'll be so kind if you give me some suggestions.
in our project, we install EMP System 1113 on Win Server2003, but it's in local network. there is no problem when we connect it using client tools in local network environment.
however, we wanna connect the Essbase Server through Internet, we map the server address (such as 10.163.163.163) as an Internet address (such as 111.111.111.111).
we didn't use VPN such tools, and, the address is just a mapping, if we don't map the port, we couldn't connect the essbase server.
here comes the question, how do we map the essbase address and port ? i mean which port should we use, so that we could connect it through Internet ?
thank you so much.
wish to reply.
hawk.

The ports that essbase use are outlined at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here/ch06s05s01.html
Cheers
John
http://john-goodwin.blogspot.com/

To know IP address and port no using DB Link

Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?

user4587979 wrote:
Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?you can also know the ip address and port number by tnsping command.
$tnsping B
eg:-
C:\Documents and Settings\rajesh-kg>tnsping TESTDB
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-JUN-2
011 18:44:48
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxxxxxx)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SER
VICE_NAME = testdb)))
OK (50 msec)

Changing the multicast Address and Port giving error

Similar Messages

Maybe you are looking for