Changing the report template

Hi All,
I have created a report using a particular template
created by me. The template contains only Margin layout
and font setting. Now, if i change the template
can i get the report layout changed according to new
template layout without disturbing body section. I tried
by reassigning the template to the report through the
report wizard but it changes the layout of body section.
Is there any way out.
Thanks.

hello,
at designtime the elements from the template are physically
imported into the report. the only way of re-applying a template
is to use the wizard, which will re-default the layout.
regards,
the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Similar Messages

  • Question on changing the report template to display the images

    I am trying to change the report template so that each table cell will display an image and a checkbox for the image. The column templatet for the new report template is like this:
    <td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t17data">
    <table>
    <tr height="90%"><td>
    <img src= "&F101_GET_THUMB.#COLUMN_VALUE#" onmouseover="return onmouseover_img('#COLUMN_VALUE#');">
    </td></tr>
    <tr height="10%"><td align="center" valign="bottom">
    <input type="checkbox" name="f01" value="#COLUMN_VALUE#"/>
    </td></tr>
    </table>
    </td>
    My questions are:
    1. If the #COLUMN_VALUE# is null, the table cell will display a broken image icon and a checkbox. How could I avoid this? I could add condition to this template, such as when #COLUMN_VALUE# is not null, but how to refer to the value of #COLUMN_VALUE# in pl/sql?
    2. I want to always put the checkbox at the center bottom, but no matter what I set "align='center' valign='bottom', it is always close to the image. Since the image sizes are different, the appearance of the checkbox are just up and down. How to fix this?
    Thanks,
    Fengting

    hello,
    at designtime the elements from the template are physically
    imported into the report. the only way of re-applying a template
    is to use the wizard, which will re-default the layout.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Change Preferred Viewing Locale by a paramter field in the report template

    Hello,
    Is there a method that allows to change the Preferred Viewing Locale at the report template level?
    Actually I have some templates for final clients in different countries, and these reports should be generated in Infoview.
    In order to generate reports in different languages, I inserted a parameter {?Language}
    Then for caption/text I used a formula like this
    Select {?Language}
    Case "en_US": .....
    Case "de_CH": .....
    Case "it_IT": .....
    Case "nl_BE": .....
    However this won't work for date axis in charts and number formats.
    So I switched to Preferred Viewing Locale settings, which seemed to be exactly what I wanted cause everything can be changed according to the local settings, except that I need to change the setting every time by selecting View - Preferred Viewing Locale - German - (Germany)... for 20 different reports
    And what's more important is that I cannot change this setting when I launch the template in Infoview. Change in Preferences will impact all the templates while I just need change on one template only.
    I had a look on all the functions available and it seems that ContentLocale function can only display the current setting.
    Is there any solutions?
    Thanks in advance,
    Wenzhao

    Post your question to BOE Admin forums

  • Change the Report Title for XML Publisher, depending on the field value.

    I want to change the Report Title as below.
    if the field_A='B' then the report title as it is defined in report defination
    else the report title is 'XXX"
    Please let me know whether it is possible, if yes please guide me. how can we do it.
    Thanks
    Venkat

    Tim covered the inline if statement, though not specifically regarding a title, in his blog recently:
    http://blogs.oracle.com/xmlpublisher/2007/12/18#a723
    The syntax is:
    xdoxslt:ifelse(.//WM_FLAG='C’,'Canceled','Approved')

  • Change the Appraisal Template in Mid of Year.

    Hi All,
    We want to edit the appraisal template which is being used in Production.
    System is allowing to edit the template in development as there are no documents created. Once we transport the change to production what will be the implication.
    Q1. Is it recommended to change the template after it is being used.
    Q2. If really need to edit the template in mid of appraisal process how do we go forward.
    Thanking you in advance.
    Kamal R.
    Edited by: Nalin Jain on Aug 5, 2009 7:41 AM

    Hi Suresh,
    We are on ECC 6.0 and SP 43.
    We need to put some extra fields / Notes to the targets and extra sub statuses to correctly identify the condition.
    But already appraisal process started and documents are created. Now we cannot either create the same documents in new template or postpone the appraisal template change to next year.
    In this situation we decided to change the existing template. We want to know what will be the implications if we change the template in development and transport it to production???
    Download and upload will create a new template which will not be useful for our case.
    Thanking you in advance.
    regards,
    Kamal.

  • In XL Reporter  the report template ER-1 is not working,

    In XL Reporter  the report template ER-1.ixr given by SAP is not working,
    Error message displayed: "Error in Expansion" how to correct this problem
    please give me the solution or mail me ER 1.ixr if you got working file, thank you
    Regards
    krish
    mail id:[email protected]

    Dear Radhakrishnan,
    This error has already been reported to SAP Support earlier also. It happens with SalesTaxRegister.ixr also and here is the solution for it :
    Whenever the Xlreport "SalesTaxRegister.ixr" is executed from
    XLReporter the error "Error in expansion" appears.
    This error occurs because the report references two fields which do not
    exist in the metadata.
    Note: SalesTaxRegister.ixr is provided by SAP for Indian localisation.
    To correct this problem, follow these steps:
    1.  Open the report definition in Excel.
    2.  Click menu 'Format > Column > Unhide' to unhide all columns. This
        will make columns A to AC visible.
    3.  Delete the content in cells O15 and O25 (PO4_NonDdctPrc).
    4.  Hide columns A to AC again and save the report.
    5.  Try to run the report again.
    The above solution will work for SalesTaxRegister.ixr report.
    For the customized report which the partner must have
    created, there would be some similar references that do not exist
    in the metadata. Once these references are deleted the report will work
    again.
    For further information please have a look at the note :  1072702.
    Regards
    Arshdeep

  • Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types. $(...).slick is not a function (OnPostRender: )

    Hi Team,
    I implemented news carousel using display template concepts.
    Its working.
    But some times it shows like some thing went wrong
    when clicke on show details
    it showing the error like
    Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types.
    $(...).slick is not a function (OnPostRender: )
    some times showing result and while refreshing the page am getting the error like below
    How to fix the issue
    Regards,
    Dhayanand

    Hi Wendy Li,
    Finally we fixed.
    The prob is that we referring two different version of jquery files in master page and page layout.
    We corrected by referring same version of jquery files in both pages
    Regards,
    Dhayanand

  • How change the report graph color in teststand

    how change the report graph color in teststand?

    Michael,
    You might also be able to customize the style sheet associated with the report. The TestStand Help provides some information about how to customize ATML or XML style sheets to change report colors based on the status of test steps.
    Please take a look at the following topics; are these helpful?
    ATML Report Style Sheets
    Modifying Cell Background Color Based on Step Status in ATML Test Results 5.0 Reports
    XML Report Style Sheets
    Modifying Cell Background Color Based on Step Status in XML Reports
    Tom
    TestStand Documentation

  • How can I change the default templates to from A4 to Letter US?

    Hi,
    I live in Québec, the french part of Canada. Because I use French, iWork think I leave in France, so the default templates are in A4.
    How can I change the default templates to from A4 to Letter US? It seem's impossible. In Pages 06, each language folder had templates. But with Pages 08, it's different.
    Please help.

    Autre façon : Ouvre un nouveau document. Il va être en A4. Dans le menu Fichier--->Format d'impression. Une fenêtre apparaît. Dans la ligne... Taille du papier, tu choisis... Lettre US; tu fais OK. Ensuite tu sauves ce document comme modèle. Menu Fichier----> Enregistrer comme modèle et tu lui donnes le nom, par exemple... USLettre.
    Ensuite, va dans le menu Pages, va dans préférences et dans la fenêtre qui s'ouvre - Préférences générales - tu choisis : Utiliser le modèle... et tu cliques sur Choisir... à droite un peu en bas de Utiliser le.... et là, dans la fenêtre qui va apparaître, tu trouves le modèle que tu viens de faire...USLettre.
    Voilà. Chaque fois que tu vas ouvrir Pages, ce sera USLettre qui sera là par défaut.
    J'espère que ça va te satisfaire.
    Évidemment l'idéal serait de pouvoir changer la template Vierge par une template Vierge US... mais j'ai pas encore réussi.
    Message was edited by: BenwaR

  • Change the Page Template

    I can change the Page Template, for example, "One Level Tabs" to "Popup" at runtime?

    (sorry to budge in!)
    The question still remains: why would you want to do this? Or maybe, why not either make the page tab-based OR pop-up? My worry would be that your user opens the popup page, then navigates back to wherever the 'tabbed' version is and attempts to load that - what would happen then?
    If there is a solid design reason to do this, you could probably achieve it by making two copies of the same page - one being the 'tab' version and one the 'popup' (although further changes to the page would require double the work).

  • How would you change the default template?

    How would you change the default template?

    Hi,
    what do you mean by changing the default template? Do you want to change the standard BEx web template for all web applications? This can and should be done with transaction SPRO, there you can change it to your own (maybe by copying the standard template and fitting it to your needs).
    With regards,
    Daniel

  • Change the stnd template for PDF reports(0QUERY_TEMPLATE_BROADCAST_PDF)

    Hi folks
    I have a requirement where i need to make some customizations like addign images and all to the pdf document which is generated through the subscription.
    The Current template which is a default is 0QUERY_TEMPLATE_BROADCAST_PDF.
    All the help is appriciated..
    Thanks
    Ravi.
    Message was edited by:
            ravi vallur

    Hi,
    Check the below thread .
    0QUERY_TEMPLATE_BROADCAST_PDF
    Hope it helps.
    Regards,
    Siva.

  • #PAGINATION# in the report template

    Hi there,
    (Apex 4.0.1)
    I am modifying the Standard, Alternating Row Colors report template, and in the After Rows sections I put:
    <tr><td class="pwc_ReportHeader">#PAGINATION#</td></tr></table>
    </table>In other words, I want the pagination to be displayed in the last row in the table, using a specific style.
    However, this is what is generated in the page:
    <tr>
      <td class="pwc_ReportHeader">
        <tr>
          <td colspan="7" align="right" >
            <table summary="">
              <tr>
                <td class="pagination"></td>
                <td class="pagination"></td>
                <td nowrap="nowrap" class="pagination"><span>1 - 2</span></td>
                <td class="pagination"></td>
                <td class="pagination"></td>
              </tr>
            </table>
          </td>
        </tr>
      </td>
    </tr>As you can see, it replaced the #PAGINATION# placeholder with a table inside a tr, which completely messes up the layout I want. These tags don't even have IDs or classes associated to them so it is impossible to style them using CSS.
    Where did those tr and table come from? Is it possible to change what is generated?
    Thanks
    Luis

    Luis Cabral wrote:
    In other words, I want the pagination to be displayed in the last row in the table, using a specific style.
    However, this is what is generated in the page:
    <tr>
    <td class="pwc_ReportHeader">
    <tr>
    <td colspan="7" align="right" >
    <table summary="">
    <tr>
    <td class="pagination"></td>
    <td class="pagination"></td>
    <td nowrap="nowrap" class="pagination"><span>1 - 2</span></td>
    <td class="pagination"></td>
    <td class="pagination"></td>
    </tr>
    </table>
    </td>
    </tr>
    </td>
    </tr>As you can see, it replaced the #PAGINATION# placeholder with a table inside a tr, which completely messes up the layout I want.Join the club:
    {thread:id=333925}
    {thread:id=1047198}
    (I'm sure there are others.)
    Where did those tr and table come from?From the innards of APEX.
    Is it possible to change what is generated?Maybe. Never done this, nor seen it done:
    {thread:id=1025125}
    Another approach would be to use a Dynamic Action/JavaScript to modify the APEX-generated elements in the DOM.
    These tags don't even have IDs or classes associated to them so it is impossible to style them using CSS.IDs and classes are not the only CSS selectors. Unless you're stuck in quirks mode on IE6/7/8/(9?), you can use attribute, child, adjacent sibling and pseudo-class selectors to target those elements.
    If you post the complete report template we can try to identify possible selectors.

  • Changing the Report - RTF layout

    Hi.
    I run the report output to RTF format. It works fine. But When I open with MS-Word the page layout is showing too small. I can't change layout anything from MS-WORD.
    What to do for viewing output of Report - 80x66 (letter size) page in MS-WORD in the same size.
    pls. help me.
    thanks in advance

    Hello Syed,
    I tried to reproduce your problem on Reports Builder 6i (6.0.8.22.0) and Reports Builder 9i (9.0.2.1.1). But in both cases, output of a report generated to RTF shows up with proper sizing in MS Word.
    If you are able to reproduce the problem with the latest patch, please provide a detailed description of the problem.
    Thanks,
    The Oracle Reports Team.

  • Dynamically change the report column name.

    Hi All,
    I have a report where i am showing data for greater than current week and year and the code of same is below
    SELECT
        item_number,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+1 THEN
                    quantity
            END
        ) plus_1,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+2 THEN
                    quantity
            END
        ) plus_2,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+3 THEN
                    quantity
            END
        ) plus_3,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+4 THEN
                    quantity
            END
        ) plus_4,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+5 THEN
                    quantity
            END
        ) plus_5,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+6 THEN
                    quantity
            END
        ) plus_6,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+7 THEN
                    quantity
            END
        ) plus_7,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+8 THEN
                    quantity
            END
        ) plus_8,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+9 THEN
                    quantity
            END
        ) plus_9,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+10 THEN
                    quantity
            END
        ) plus_10,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+11 THEN
                    quantity
            END
        ) plus_11,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+12 THEN
                    quantity
            END
        ) plus_12,
        SUM
        (   CASE
                WHEN year_week_num = to_number(to_char(sysdate,'IW'))+13 THEN
                    quantity
            END
        ) plus_13     
    FROM
        (   select
                re.item_number,
                row_gen.year_week_num,
                SUM(NVL(re.quantity,0)) OVER(PARTITION BY re.item_number ORDER BY row_gen.year_week_num) quantity,
                ROW_NUMBER() OVER(PARTITION BY re.item_number, row_gen.year_week_num ORDER BY NULL) rn
            from
                (   SELECT
                        to_number(to_char(sysdate,'IW')) + ROWNUM year_week_num
                    FROM
                        DUAL
                    CONNECT BY LEVEL <= 13
                ) row_gen LEFT OUTER JOIN
                        (   SELECT
                                le.item_number,
                                le.quantity,
                                to_number(to_char(sysdate,'IW'))+1 year_week_num
                            FROM
                                BACKLOG_WEEK_WH_AFTR_ATP le
                            UNION ALL
                            SELECT
                                re.item_number,
                                -re.quantity,
                                to_number(substr(re.year_week,-2,2)) year_week_num
                            FROM
                                BACKLOG_ATP_GT_CW re
                         ) re
                    PARTITION BY (re.item_number)
                    ON ( row_gen.year_week_num = re.year_week_num)
    WHERE
        rn = 1
    GROUP BY
        item_numberI have a item in the report page from which i am displaying which week this year holds and the code of same is below
    In the item source, i have selected source type as sql query return single value. and the current week is returning as "2011-WK30"
    select to_char(sysdate,'YYYY"-WK"IW') from dual;Please suggest how i can change the display of column dynamically. I want PLUS_1 to show as 2011-WK31, PLUS_2 to show as 2011-WK32 and so on for this week. When next week will come then the plus_1 should show as 2011-WK32, plus_2 to show as 2011-WK33.
    Any help how to do this?
    Thanks in advance
    Regards

    Hi,
    Go to the Report Attributes, in the Column Attributes section:
    1) Use Headings Type as PL/SQL.
    2) In the text area Function returning colon delimited headings write a PL/SQL anonymous block returning colon delimited headings.
    Hope it helps!
    Regards,
    Kiran

Maybe you are looking for