Changing the value

Hi,
I want to change the payment terms in my voice.

Hi,
I don't think you can change your payment term in the billing document directly.
You can do one thing.Cancel the billing document and change the payment terms in the sales order and create the billing document again.
This would solve your purpose.
Reward points if it helps.
Regards
Karan

Similar Messages

SPEL? make REASON field required if user has changed the value in SALARY

I have a requirement to make REASON field required if user has changed the value in SALARY field. Is it possible using spel? what are my options?

Karan,
You can change the Rendered Property through personalization.
But in your requirement you need to attach the Spell through personalization & extend the existing CO to set the value of the SPELL based upon the condition.
Note - Refer this thread http://forums.oracle.com/forums/thread.jspa?threadID=2176729&tstart=0. If you have worked on SSHRParams kindly help the user.
Regards,
Gyan

Changing the value of a control in a subvi

I think the answer is out there somewhere but I've read through many threads found with searches similar to this topic so sorry to repost...
I would like to change the value of a top-level VI control from a sub-vi. The data is being used as a parameter, I was thinking about using a local/global but I've seen this discouraged. Is there a way I can do it with references, property, or invoke nodes (or some other suggested method) ?
I am guessing that if I am not using globals I will need to wire into the sub-vi?
Dave

I'd like to clarify what I am trying to do a bit more...
The sub-vi has a control of the same type as the top-level vi. The inital control value is being passed into the sub-vi from the top-level vi. The sub-vi uses the control value in several places through local variables (reading and writing to it)
I would like to modify the vi so the top-level vi control value changes whenever the sub-vi changes the control value that is passed to it.
My last attempt was to make a refnum control in the sub-vi (by dragging from top-level block diagram to sub front panel) and then creating a property node from that refnum control. Using the property node "value" did not give me the value of the control from the top-level vi as I had hoped. Wiring it to a terminal that was expecting the same type of control (a cluster of two numerics) caused a wiring conflict.
I noticed elsewhere in the code that the programmer used a text file to save options (unfortunately the control I am working on was not originially included in the options). There is a vi that, when called, either reads or writes to the text file. From a C/C++ programming perspective it seems quite odd to me not to just keep all this data in memory and pass it around. Is using a file to store variables a typical practice in LV programming (even when they are retrieved multiple times during program execution) ?

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

Change the value of a field in a form when the form is displayed

Hello
I have a report which has a link to a form for updating the records. I have used a link to the form from report which displays the the record to be updated i.e it gets default values from the report. I need to change one of these values at the time of displaying the form. The set_value in the 'before displaying the page' section doesn't change the vaue displayed in the form. I tried in other 'Advanced pl/sql' sections provided but didn't succeed.
Thank you
Jayasree

hi,
let's call the new value u want to set "NewValue"
insert this code in the before displayin' the page
htp.p('<script language="Javascript1.1">
function defaultValue(fieldname)
var thefield;
for( var v=0; v < document.forms[0].elements.length; v++)
// get the right field
if (document.forms[0].elements[v].name.indexOf(fieldname) >= 0 )
thefield = document.forms[0].elements[v];
thefield.value='''||NewValue||''';
break;
</script>');
in the after displaying the page section call the function above with the appropriate field:
htp.p('<script language=javascript1.1>
defaultValue(''Field_Name'');
</script>');
where Field_name is the name of the field u want to change the value!
Mohamed

Dump when changing the value for a field (of 13 decimals) in alv grid.

Hi Group,
Its giving a dump when user is trying to change the value.
dump description: Unable to interpret "70,000 " as a number.
what is happening here is, the original value is 50,000 and he is deleting 5 and replacing it with 7, here its throwing the dump.
If he removes the complete number 50,000 and then gives 70000 its taking the value.
I tried to use, the decimals options in alv field catalog but to no joy.
Please can you give me an advice on this.
Many Thanks.

the problem is the comma in the 70,000....that's an alpha character.... Normally, we expect SAP to display numeric fields in a appropriate format, based upon their numeric type, but trying to forcibly insert '70,000' into a true numeric-type field can generate an 'unable to interpret xxx,xxxx as number' error.
You could experiment with changing your ALV column to a char17 (or appropriate width) and putting your numeric value into that to display, then converting back to type P, or other field type in the table, in a column that is not displayed, when the user changes the value.... essentially two columns, one not displayed with a routine to copy/convert the numeric field into the alpha field and the reverse when the field is changed.
But, the better solution is probably for the user to understand that they're seeing a formatted numeric field, and that they need to replace the entire value with the only possible punctuation being a decimal and (if necessary) a negative sign.

How do I change the value of the Order By field in an MP3 file?

good day Guys,
I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
How do I change the value of the Order By field in an MP3 file?
for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
I've been "collecting" several songs over SEVERAL years
I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
I have used the program Mp3tag to remove the music tags
I've tried to download the song again and go through Mp3tag program as if it were a new song
I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
I've tried to catch the song again, from a previous backup
I've tried to create a copy of the file at iTunes own
I've tried to create a new music file in a music recording program
NOTHING of what I did above resolved
-> I'm using Windows 7 64-bit Ultimate
-> I'm using iTunes 12.1.1.4 for 64-bit Windows
-> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
-> The iPad is updated with iOS 8.1.3 and is not unlocked
I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
Hugs and await answers,
Paulo Ricardo

hello turingtest2,
my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
I do not know what to do...
I want to learn to ride the iTunes Music Library, that my work is less
you know any site that teaches create/manage my iTunes Music Library?
this site/forum may be in English, no problem
thanks for all your help and the help of others who responded to my request

How to disable or change the value of h:commandlink jsf component

Hi,
I am a student. I am using h:commandlink. I need to change the value of the component once it is clicked by the user. How do i do that?
If i cannot change the displayed value of the commandlink. I am thinking of atleast disabling the link once the user clicked., to avoid the link being clicked more than once by the user.
<h:commandlink id = "follow" action = "usermanager.followdoctor" value = "Follow"/>
Usermanager is my managed bean class for this jsp page. The value "Follow" is the one that i want to be changed to "following" once it is clicked. Please help me. Thanks for your time in advance.

Hello qimbal2,
Thanks for getting back to me. you are right , i should disable the link as soon as it is clicked. I went ahead and implemented this logic by using a property in my bean class and binding that property to the value of my link. I wrote the logic in my action method in such a way that when i click on follow for the first time, the value of the link would change to 'Following' and the link would be disabled. It works for me now.
Thanks,
Suha

How can I change the value in a stepper cell

In Numbers 2.3 I was able to change the value in a stepper cell by highlighting the value and using the arrow keys to increase or decrease the value. This was a very easy way to input data. Numbers 3.0 when I do this is moves to another cell
Is there a way to get the use of the arrow keys to change the values in 3.0?
Thanks

I use number to keep a running daily tally of the productivity of the members of my group. As each member performs certain tasks, all I had to do was click the up arrow and add to it. IE Jim made 4 widgets yesterday and then made 4 today, I would just hit the up 4 times total 8.
I guess the good news is when I upgraded to Numbers 3.0, It did not delete Numbers 2.3
I will continue to use 2.3 until it no longer works, I guess
Thanks for the replies

Change the value of a variable used in a View query

I am using JDeveloper 11g to develop a simple portlet application which displays data loaded from database. I am displaying the data by dragging the ViewObject from the AppModuleDataControl to the View.jspx page and selecting the option ADF Read-only Table. My ViewObject has a single variable :empId. Now is it possible to change the value of this variable with a value that comes from the request object. On the internet I found the following code:
        FacesContext facesContext = FacesContext.getCurrentInstance();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp =
        elFactory.createValueExpression(elContext, "#{data.AppModuleDataControl.dataProvider}",
        Object.class);
        ApplicationModule am = (ApplicationModule)valueExp.getValue(elContext);
        ViewObject emplVO;
        emplVO = am.findViewObject("EmployeeView1");
        emplVO.setNamedWhereClauseParam("empId", "1");I have put this code in the public void processAction(ActionRequest request, ActionResponse response) method. However this does not work when I deploy it.
Does anyone know if the above code is correct in this case and if there is a better way how I can set this up?

Hi there:
Did you add a break point and debug the code to see what is the value for the :empid parameters passed in to your view object?
If you are sure you have passed in the correct value for ":empid" parameter, then do the following:
String amDef = "yourAmDef";
String config = "yourConfig";
ApplicationModule am =
Configuration.createRootApplicationModule(amDef,config);
ViewObject emplVO;
emplVO = am.findViewObject("EmployeeView1");
emplVO.setNamedWhereClauseParam("empId", "1");
empVO.executeQuery();
which will execute your view object with the new bind variable value and refresh the view.
Please mark my answer as 'Correct' if it solves your problem, or 'Helpful' if it does.
Thanks,
Alex
Edited by: Alexbie on 27-Aug-2010 8:52 AM

How to change the value of subtitution string in a page at runtime

Hi,
I need to change the value of a substitution string which is mentioned in application attributes at runtime.
The value will be fetched from a field in database on load of each screen.
Can anybody help.......
Help will be appriciated........thanx in advance
Sunil

Substitution strings are meant to be static, like global constants.
If you need some variable stuff, use application level items and set them using Application level computations/processes

Is it possible to change the values of fields In Me21n tansaction?

I Have to put in some logic to change the values of already existing Shipping condition field in the SHIPPING subscreen at the Line item level in ME21n transaction.
I searched for the user exit to do soo. Did not find anything to do this. I would like to know if it is possible through some other way.
thanks
shubha

Hi Shubha!
You might use BAPI_PO_CHANGE. Even if there would be a user exit / BADI, then execution is not sure.
You said: 'already existing shipping field' -> exits of a transaction are only executed during maintenance, not afterwards.
So maybe you have to make your changes completely outside of PO.
Still have a look at BADI ME_PROCESS_PO_CUST, there are a lot of methods and one might help you.
Regards,
Christian

Error window while changing the value in SelectOneChoice.

Hi I am facing a problem on change of values in SelectOneChoice, "ERROR For input string: "N"
Below is how i am implementing SelectOneChoice:
I am creating values for SelectOneChoice in a Java class:
*SelectItem itemY=new SelectItem();*
*itemY.setLabel("Yes");*
*itemY.setValue("Y");*
*confirmation.add(itemY);*
*SelectItem itemN=new SelectItem();*
*itemN.setLabel("No");*
*itemN.setValue("N");*
*confirmation.add(itemN);*
Using this values in JSFF like this:
*<af:selectOneChoice value="#{bindings.confURLSubmitted.inputValue}"*
*label="Conference Website URL Submitted"*
*required="#{bindings.confURLSubmitted.hints.mandatory}"*
*shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"*
*binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"*
*id="confURLSubmitted"*
*unselectedLabel="Select One"*
*autoSubmit="true"*
*valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">*
*<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"*
*binding="#{backingBeanScope.EditComplianceDetails.si1}"*
*id="si1"/>*
*</af:selectOneChoice>*
And in bean method i am trying to print the selected value in SelectOneChoice:
*public void OnConfURLSubChange(ValueChangeEvent valueChangeEvent) {*
*// Add event code here...*
*System.out.println("this.confURLSubmitted.getValue() "+this.confURLSubmitted.getValue());*
Now when i try to change the value in SelectOneChoice:
I am getting an error window "ERROR For input string: "N"
Any idea y i am getting this error.
Thanks in Advance

Remove selectOneChoice value binding and set static value and try
*<af:selectOneChoice value="XXX"*
label="Conference Website URL Submitted"
required="#{bindings.confURLSubmitted.hints.mandatory}"
shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"
binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"
id="confURLSubmitted"
unselectedLabel="Select One"
autoSubmit="true"
valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">
<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"
binding="#{backingBeanScope.EditComplianceDetails.si1}"
id="si1"/>
</af:selectOneChoice>

How to change the Value of a Varible while debugging in ECC 6.0

Hi all,
How can i change and Save the Value of a varible while debugging a FM in ECC 6.0.
I can able to change the Value of a variable by clicking the Pencil Icon (Change icon) which is there next to that value
But i am not able to save that value
Please give the suggestions
Thanks in Advance
Regards
Ajay

Ajay,
I think you are changing more than one variable value at a time...this things generally happen in this case.
Go step by step.....
Press on the pencil button
value filed becomes editable
change the value
and at once press the enter
the ediatble field automatically becomes non editable, and hence retain the changed value.
Pooja

How to change the value of finished goods

Hi
Finished goods Material has been created with MB1C Mvt type 561. Valuation has taken from Material master standard price. can we change the value of the same. Can any body help me.
rgds
Raghu shetty

Hi,
If the valuation is from standard price, then you must run a new product costing (tcode CK40N). Check in forums of controlling (CO) and production (PP). I think that you have PP, ie: BOM, routes, and so on.
If the valuation is from variables prices (check it in table MBEW in field VPRSV) then run MR21 and set the new price (check it in MM forum)
I hope this helps you
Regards,
Eduardo

How to change the value of a variable in new ABAP debugger.

Hi Guys,
I can't change the value of a variable in the new ABAP debugger.. when I change its revert back to old value. but this is not the case with the old version. How to do this..
Cheers
Senthil

Hi,
1. Dobule click in the variable in the variable tab.
2. Click the Change icon in Detail.Dis.
3. enter the new value and press enter
Refer
[http://www.sapdb.info/new-abap-debugger/|http://www.sapdb.info/new-abap-debugger/]
[http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm]
<removed_by_moderator_together_with_points>
Regards,
SB
Edited by: Julius Bussche on Jun 24, 2008 8:21 AM

Changing the value

Similar Messages

Maybe you are looking for