Changing the Workflow Start Options in Visual Studio

Hi,
These are the start options in SPD:
Now, I'm developing my first workflow in Visual Studio. I'm at the debugging stage. I want to change the start options, and I cannot find any settings similar to the above. How do I adjust the start options in Visual Studio?

When the time of workflow creation you can mention. Below link check Figure 10
http://sharepointpromag.com/sharepoint-2010/creating-sharepoint-2010-workflows-starting-visual-studio-2010
Ravin Singh D

Similar Messages

  • Setting Workflow status not working in imported workflow from SPD to Visual Studio

    Hi all,
    I have created SPD workflow and imported in visual studio. When I deploy imported Workflow using visual studio feature I found that Setting Workflow Status action is not working. Do I need to change Set Workflow status activity in Visual studio to make it
    work.
    Rohit Pasrija

    Hi,
    According to your post, my understanding is that Setting Workflow status did not work in imported workflow from SharePoint Designer to Visual Studio.
    I try to reproduce the issue and the result is the same as yours.
    After I import the workflow, choose the .xoml file, the view is as below:
    To troubleshooting the issue, I add a new item to the project and select “Sequential Workflow” in the template.
    After I click the Tool, I find that there don’t have the “SetCustomWorkflowStatus1” activity.
    To set the status of the state, we need to use the “Set State” Activity in the “SharePoint Workflow” toolbar.
    That is the reason why the “SetCustomWorkflowStatus1” activity does no work.
    More information:
    Apply Custom Values to Visual Studio Workflow Statuses
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • WPF 4.5 doesn't show the option to open the project in Blend for Visual Studio 2013

    Hi,
    In my WPF 4.5 project in Visual Studio 2013, when I right clicked the name of my project it doesn’t show the option to open in Blend for Visual Studio 2013….. and when I try to open the project with Blend for Visual Studio 2013, it doesn't show anything.....
    I don't see the project nor the UI of my WPF 4.5 project
    How I can open my project in Blend for Visual Studio 2013???
    Thanks!!!
    Regards,

    Hi Jaquense,
    open Blend. Open Project/Solution and select the .sln-file of the project you've created in visual Studio. That's it. In the Project Explorer in Blend you should see your files and you should be able to open up your XAML-files.
    Thomas Claudius Huber
    "If you can't make your app run faster, make it at least look & feel extremly fast"
    My latest app:
    The "Womanizer" :-)
    twitter: @thomasclaudiush
    homepage: www.thomasclaudiushuber.com
    author of: ultimate Windows Store Apps handbook |
    ultimate WPF handbook |
    ultimate Silverlight handbook

  • When i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync  options,how can i change that option,can any one help me.........?

    when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync  options,how can i change that option,can any one help me.........?

    I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
    Thanks very much for your feedback.

  • Remove open workitem from user inbox after the workflow starts again.

    I have heard that there is a possibility to remove a open workitem from the user inbox, after the workflow starts again for the same object (data update), via a termiantion event. I have searched in the sap workflow dokumentation but i could not find out how to use this. Could somebody provide me some detailed documentation or examples how to use this for my problem?
    Thanks,
    Steve

    Hi Sudhir,
    the workitem which should terminate is a decision task with two results. The wolkflow looks as follows:
    Activity: Read Data
    Decision: Approval Check Decision
    Activities: Approve or Reject
    How should it look like in your opinion with the termination? How looks this option to terminate this workitem? The workitem should terminate automatically from the userinbox if the workflow starts again for the same object (with updated data).
    Thanks,
    Steve
    Edited by: Steve Malack  on Mar 13, 2008 10:20 AM

  • The Application Data folder for Visual Studio could not be created

    Hi! My laptop was working fine but someone recently installed Malware Bytes to my laptop and supposedly found 4 problems and "fixed" them afterwards Visual Studio Professional 2013 and Chrome stopped launching. When I realized this happened I uninstalled
    Malwarebytes but it was too late. Every time I tried launching Visual Studio I would get a message that said something like: "Two or more components could not be found. Please reinstall". I did a "fix" on Visual Studio but this solved nothing
    only changed the message, the new message was "The Application Data folder for Visual Studio could not be created" so I uninstalled the program and all the extras I found on my Control Panel. Downloaded Visual Studio Community 2013 I'm trying to
    install it but I got the same exact message again. Why is this happening? What does it mean? Before I uninstalled Visual Studio Professional 2013 I looked for ways others solved it but nothing seemed to work. Please help. Thanks!

    Hello Danny,
    The Malware Bytes may have already modified some files/registry values/environment variable which is used by Visual Studio and may be the setup cannot create it for you again.
    Please try the workaround here in this blog:http://tutewall.com/application-data-folder-for-visual-studio-could-not-be-created/ and remember to backup your
    registry key before you do any actions to the registry table.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I change the default start up folder to be d:\work\ ?

    How can I change the default start up folder to be d:\work\ ?
    It seems to be going to one default folder every time I open that I didn't suggest.
    I'm using Bridge CS4
    Thanks ahead
    Line

    If the program does not open the last folder you visited you most likely have the option enabled to autoload Bridge on Startup.  Either disable that option  in PS or shut Bridge down before you shut off the computer.
    Message was edited by: curt y
    If you always want it to start on a specific folder you can leave it on autoload, go to folder you want it to start on then exit Bridge.  It should load this each time in future.  Many of us discourage the autoload option as it can lead to other problems as well.

  • Error when running the Crystal Report 9.1 (visual studio 2003) in the deployed server

    Hello,
    1) I am suddenly getting an error message ‘Load Report failed’ in a production server (where the VS2003 application is deployed) when the Crystal Report is executed. This has happened maybe because of the Windows/Crystal Report Updates!
    I am able to see the same report perfectly fine in the development computer using VS 2003.
    I am using the 9.1 version which is part of the Visual Studio 2003.
    The event logs show 'Either the keycode library is not registered or it cannot be loaded ...EventID=10029'. See attached screen shot.
    Please help?
    2) Since I was getting a registration suggestion window  for using Crystal Reports, I registered twice using different email address and it said that it will send me the KeyCode for the Crystal report but after successful registration I never got any keycode but just an email acknowledging the Registration.
    I believe the KeyCode is required to use it in the server to execute/run a report.
    Can SAP representative email the keycode to my gmail account?
    My product key is: 
    Please help to resolve both my problems
    Thanks in advance,
    Sanjay Chudasama

    If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
    For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
    - Ludek
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Share Your Knowledge in SCN Topic Spaces

  • I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

    I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
    I am also providing you with a screenshot of what appears! I need photos on my iPad2
    Message was edited by: angana

    You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
    You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

  • Error when integrating the generated SUP code in Visual Studio

    Hi,
    I am working on SUP2.1 and trying to create a Windows Mobile Application. I have created MBOs and generated the code successfully. Now, when I am trying to integrate the generated code with the client application in Visual Studio, I am getting an error:  "File or assembly name 'sup-client, Version=1.5.2.0, Culture=neutral, PublicKeyToken=F7584B9EEA15C033', or one of its dependencies, was not found"
    Does anybody has any idea on this? Any help is appreciated!

    If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
    For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
    - Ludek
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Share Your Knowledge in SCN Topic Spaces

  • Changing the Media Start point

    So I just had a hard drive crash on me and I did not have back-ups of my footage. It's not to bad because I have back-ups of the project file I was working on. So all I was going to do is a Batch Capture to reconnect all of my clips. Only problem is the person I had capture the footage did not leave enough pre-roll when they did a capture now. So now when it tries to re-capture it says "Cannot locate specified timecode"
    This is because there is not enough pro-roll on the clip to allow it to batch capture. When I look at the Media Start in the browser window for the clip it says it starts at 00:00:02:31. I need to change this to a later start so it does not try to roll the tape so far back. So.....
    How do I change the Media Start Point???
    Thanks

    Ok, I am following you, I just need to make sure the clips in the edited timeline reconnect with the old master clip.
    I could keep the old offline master clip and just make it reconnect to the new captured clip. But will this make all of my already edited clips in my sequence that are looking at the old master clip off by however many seconds I had to reset the in-point to get the tape re-captured?
    Thanks for the tip on dragging clips to the L&C window, I did not know you could do that.

  • I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

    I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

    This is the code which we have used.
    //////////Return if it is first time for the day or not//////////////
    + (BOOL)isFirstTimeToday {
    BOOL result = YES;
    NSDate *now = [[NSDate alloc] init];     /// represents the current time
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
    NSDate *today = [gregorian dateFromComponents:components];
    [now release];
    [gregorian release];
    NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
    if (savedDate) {
    if ([today earlierDate:savedDate] == today) {
    result = NO;
    return result;
    ////////Stores the date/////////////
    + (void)userDidVisitReenforceScreenToday {
    [[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
    ////////////What [NSDate todayAtMidnight] stores/////////////////////
    + (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
    NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
    NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
    [gregorian release];
    NSLog(@"dateAtMidnight : %@",dateAtMidnight);
    return dateAtMidnight;
    + (NSDate *)todayAtMidnight {
    return [self daysFromNowAtMidnight:0];
    Please Suggest..

  • I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

    I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

    Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
    developer.apple.com

  • I use js change the sequence of options, JSF go through lifecycle, why?

    Hi,All
    When I use javascript change the sequence of options,
    JSF go through Restore View, Apply Request Value,
    Process Validations, Render Response four lifecycle. why?
    <f:view>
    <head>
    <script>
    function moveDown()
         var selObj = document.getElementById("org_rank:childOrgs");
         var index = selObj.selectedIndex;
         if (index == -1 || index >= selObj.options.length - 1)
         return;
         var selectedText = selObj.options[index].text;
         var selectedValue = selObj.options[index].value;
         selObj.options[index].text = selObj.options[index + 1].text;
         selObj.options[index].value = selObj.options[index + 1].value;
         selObj.options[index + 1].text = selectedText;
         selObj.options[index + 1].value = selectedValue;
         //selObj.options[index + 1].selected = true;
    </script>
    </head>
    <body>
    <h:form id="org_rank">
    <table align="center" border="1" cellpadding="0" cellspacing="0">
    <tr>
    <td align="middle" heigth="100" width="160">
    <h:selectOneListbox id="childOrgs" value="#{orgDelegate.curId}" style="height:100px;width:150px" >
    <f:selectItems id="orgNames" value="#{orgDelegate.orgNames}" />
    </h:selectOneListbox>
    </td>
    <td align="middle" width="80">
    <h:commandButton value="down" onclick="moveDown()" /><br><br>
    </td>
    </tr>
    </table>
    <h:messages styleClass="errorMessage" layout="table" showDetail="true" showSummary="false" />
    </h:form>
    </body>
    </f:view>

    When you say the text shrinks when you change the size of the window, do you mean in terms of making the window smaller / zooming out from the page so that for instance you can see more of the "page" that you're working on?
    If so then that's by design and is how it's always been. The view you see in Word is designed to represent what would appear on the page if you printed it, so relative to the page the text remains the same size. If you change the page so that you can see
    more of it, eg effectively zooming out, then the size of the text must shrink. It's no different to holding a physical document in front of you, if you move the paper further away from you so the page looks smaller, the text will as well.
    On the other hand if you mean when you make the window smaller, eg displaying less of the grey space on either side, that the page and text shrink then I don't know what you mean. Which version of Word are you using? I've tried with Word documents in Word
    2010 and Word 2013, and in both cases simply changing the size of the document window does nothing to the view of the document (other than make it impossible to read all the test on a line without scrolling if I go too far.

  • How to change the Workflow Business Objects

    Hi,
    How to change the Workflow Business Objects. I need to add custom code to the Method. can I create only custom method or I need to copy the existing object to Custom object .
    Thanks
    Niranjan

    Hi,
    Check the following link:
    http://www.sap-img.com/workflow/sap-workflow.htm
    http://www.sapmaterial.com/badi.html
    Regards,
    bhaskar

Maybe you are looking for