Channel table to table
Hi All,
I would like to Fill in a Table in the SUD with a Channel Data (more than 20000 rows)
I was trying with a loop which takes more than 3 mins to fill the table and display it .I just need to consider the real data NOVALUES are not taken in to consider.
For rowcnt = 1 To ChnLength("PosPeaks")
If Not ( CHD(rowcnt,CNo("PosPeaks")) = "NOVALUE" ) Then
tblCrossOver.Cells(cnt,1).Value = rowcnt
tblCrossOver.Cells(cnt,2).Value = Round(CHD(rowcnt,CNo("PosPeaks")),10)
cnt = cnt + 1
End If
Next 'rowcnt
Output should be like the Table above.
Kindly help me with this.
regards,
Swaroop K.B
Solved!
Go to Solution.
Hi dragnov,
Please find attached a SUD example which uses the XTable - the fast table for DIAdem dialogs.
In this table the channels of the example dataset "Noise data" are displayed. Each of these channels contains 325 000 values. With using the XTable it is easy to scroll through the channels.
In the XTable we have tow main events: "EventValGet" and "EventValSet"
"EventValGet" is called for each cell to get the content which should be shown in that cell.
"EventValSet" is called for each cell to save the content which have been changed.
This table is very fast, because this is done only for the table row's and col's you currently see.
To run the example, please load the example dataset, open the SUD editor and load and run the attached example.
If it is necessary to change the displayed data go to the initialization event (row 14) and change the channel group name.
The example was created with DIAdem 2011
Greetings
Walter
Attachments:
FastTable.SUD 11 KB
Similar Messages
-
in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?
Hi silvano,
If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
Start in Cell B2
1 Tab 2 Tab 3 Enter
4 Tab 5 Tab 6 Enter
7 Tab 8 Tab 9 Enter
Now you are ready to type into B5 .
Another way that some people find easier is to enter one column at a time
Start at B2
1 enter
4 enter
7 enter
etc.
Now start with C2.
Use whatever suits your work flow.
Regards,
Ian. -
Dear All,
I created one table like
create table cls_lrn_tab_unique (F_no number unique UK_F_NO );
after performing some operations I want to delete the same.
At that time i got following error. Please help me and tell what is the reason for the error.
ORA-00604 error occured at recursive level1
ORA-20123 Insufficient privileges: you cannot drop table cls_lrn_tab_unique TABLE,
ORA-06512 at line no 2
Thanks and Regards
Prasad26bffcad-f9a2-4dcf-afa0-e1e33d0281bf wrote:
Dear All,
I created one table like
create table cls_lrn_tab_unique (F_no number unique UK_F_NO );
after performing some operations I want to delete the same.
At that time i got following error. Please help me and tell what is the reason for the error.
ORA-00604 error occured at recursive level1
ORA-20123 Insufficient privileges: you cannot drop table cls_lrn_tab_unique TABLE,
ORA-06512 at line no 2
Thanks and Regards
Prasad
ORA-20123 is a localized/customized error code & message; therefore any solution depends upon what is unique inside your DB now.
I suspect that some sort of TRIGGER exists, which throws posted error, but this is just idle speculation on my part.
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002 -
Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
| Test case Number | Test Step number |
| 100 | 100 |
Page No. 2
| Test case Number | Test Step number |
| 200 | 300 |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc : This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc 25 KB
expected.doc 26 KB -
Master table, detail table, detail table not getting refreshed selection
i have a page where i am displaying data as master table and detail table. both table VOs are based on SQL queries which use bind variables.
i have a view link between vos of type 1:M
i created master table detail table page by dropping detail iterator from data control panel under master and selecting master table detail table
on my page i see detail table records getting populated only for first record of parent table.
on changing parent record, child table shows same records and does not refresh
i am using partial triggers on both tables to be populated on a button click as i need to pass some bind variables to VOs which are taken as input from users
how can i show corresponding rows in detail table when parent record in table changes
will i have to use table selection listener
is it possible declaratively to have master detail table view when both VOs have bind variables
jdev 11 1 1 5these are the SQLs used
Parent SQL Based VO Query
SELECT to_char(d.status_date,'yyyymmddhh24') TIME123, count(DISTINCT d.c4)
FROM t1 d,
t2 w
WHERE w.c1 = nvl(:ou, w.c1)
AND UPPER(w.c2) = UPPER(nvl(:tt, w.c2))
AND d.c3 >= :startTime AND :startTime IS NOT NULL
AND d.c3 <= :endTime AND :endTime IS NOT NULL
AND d.c4 = w.c4
AND UPPER(d.status) = 'CLOSED'
GROUP BY to_char(status_date,'yyyymmddhh24') ORDER BY to_char(status_date,'yyyymmddhh24') DESC
Child SQL Based VO Query
SELECT w.c1,
w.c5 - w.c6 processing_time,
w.c3,
w.c6,
w.c7,
w.c8,
to_char(d.status_date,'yyyymmddhh24') TIME123 FROM t1 d,
t2 w
WHERE w.c2 = nvl(:ou, w.c2)
AND UPPER(w.c3) = UPPER(nvl(:tt, w.c3))
AND d.c4 >= :startTime AND :startTime IS NOT NULL
AND d.c4 <= :endTime AND :endTime IS NOT NULL
AND d.c1 = w.c1
AND UPPER(d.status) = 'CLOSED' ORDER BY to_char(status_date,'yyyymmddhh24') DESC
view link is based on column TIME123 -
Master table detail table with SQL based read only VO with bind variables
i have a page where i am displaying data as master table and detail table. both table VOs are based on SQL queries which use bind variables.
i have a view link between vos of type 1:M
i created master table detail table page by dropping detail iterator from data control panel under master and selecting master table detail table
on my page i see detail table records getting populated only for first record of parent table.
on changing parent record, child table shows same records and does not refresh
i am using partial triggers on both tables to be populated on a button click as i need to pass some bind variables to VOs which are taken as input from users
how can i show corresponding rows in detail table when parent record in table changes
is it possible declaratively to have master detail table view when both VOs have bind variables
jdev 11 1 1 5
these are the SQLs used
Parent SQL Based VO Query
SELECT to_char(d.status_date,'yyyymmddhh24') TIME123, count(DISTINCT d.c4)
FROM t1 d,
t2 w
WHERE w.c1 = nvl(:ou, w.c1)
AND UPPER(w.c2) = UPPER(nvl(:tt, w.c2))
AND d.c3 >= :startTime AND :startTime IS NOT NULL
AND d.c3 <= :endTime AND :endTime IS NOT NULL
AND d.c4 = w.c4
AND UPPER(d.status) = 'CLOSED'
GROUP BY to_char(status_date,'yyyymmddhh24') ORDER BY to_char(status_date,'yyyymmddhh24') DESC
Child SQL Based VO Query
SELECT w.c1,
w.c5 - w.c6 processing_time,
w.c3,
w.c6,
w.c7,
w.c8,
to_char(d.status_date,'yyyymmddhh24') TIME123 FROM t1 d,
t2 w
WHERE w.c2 = nvl(:ou, w.c2)
AND UPPER(w.c3) = UPPER(nvl(:tt, w.c3))
AND d.c4 >= :startTime AND :startTime IS NOT NULL
AND d.c4 <= :endTime AND :endTime IS NOT NULL
AND d.c1 = w.c1
AND UPPER(d.status) = 'CLOSED' ORDER BY to_char(status_date,'yyyymmddhh24') DESC
view link is based on column TIME123Instead of doing the master-detail layout by dragging the details over, can you try a new page where you first drag the master VO over and then drag the detail VO over, and then set partialTrigger from the detail to point to the master?
-
XI message status at Adapter engine level using a table (SAP table)
Hello Experts,
XI message status at Adapter engine level using a table (SAP table).
We want to write a custom report using ABAP so Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Please let me know the table name and field name for this and the table name for the desciption of the status of XI messages at Adapter level.
Thanks
GopeshHi Gopesh,
the Adapter Engine Messaging System messages are on the Java schema,
i.e., see the following -
[XI/PI tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables]
Regards
Kenny -
Error Updating table condition table 372 in J1IIN
Hello all,
I am facing the problem while working in ECC 6.0 environment in the transaction code J1IIN.
I have maintained the condition type JEXP ( A/R BED %) as 14% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e a new Access sequence(ZJEX) and also a new condition tpe (ZJEP). We don't have other Excise condition type in our Pricing procedure.
In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Also while debugging it gives a message "An exception (CX_BADI_INITIAL_REFERENCE) occured".
Does this help in anyways.
Gurus plz give u r suggestions.
Thanks in advance,
Regards,
Karthik.Hello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS -
Error updating the table condition table 372 in J1IIN
Hello all,
I am facing the problem in the transaction code J1IIN (In CIN).
I have maintained the condition type JEXP ( A/R BED %) as 16% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like Error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Gurus plz give ur suggestions.
Thanks
SrinivasHello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS -
How to declare Dynamic table in Tables Parameters of a Function Module...
Hi Gurus,
I would like to Know how to declare a Dynamic table in Tables parameters of a Function Module.
so that it should be able to hold any table data ....
I have tried all possible ways of trying to assign fields-symbol like declarations which doesnt allow here ...
plz Dont reply with the basics of creating dynamic internal tables, coz my case is not an Internal table it is FM table parameter declaration.....Hi,
If you are requirement is to create a function module with tables parameter having a generic line type i.e. no specific line type
just declare it with a name under Parameter name with out specifying the type.
A reference function module with such parameter, i would quote is the standard GUI_UPLOAD/ GUI_DOWNLOAD where the parameters specified under TABLES are generic.
If you want to process the values passed to these parameters in the source code of function module, field symbols would be a preferable option.
Regards,
Sharath Panuganti -
Help needed in Table in Table Approach using OAF
We have a requirement in OAF wherein the results region of search page should give header details. And in header details there is a show and hide button which would show all the line details corresponding to the header (like Table – in – Table).
For Header details I have used advanced table under that I have used detail region and there I have created advanced table for line details.
I have also created view link to link the header details view object and line details view object.
In Process Request method of the controller I have set view link name and child attribute name for both outer table (header details table) and inner table (line details table)
When I run the OAF page, I am getting the below error. I am facing this error when I tried to set the view link name and child attribute of inner table (i.e. line details table) in the controller.
Detail 0 ##
java.lang.NullPointerException
at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.updateInnerTableProperties(Unknown Source)
at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.processRequestAfterController(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAAdvancedTableHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.beans.layout.OAFlowLayoutBean.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(Unknown Source)Hi,
read the response above. This is the wrong forum.
try OA Framework
Frank -
I have certain sections where the table headings continue with letters, but not always. Can I create a paragraph style, or manipulate the numbering easily, so that I can add letters after the table # when it is necessary?
Table 1
Table 2
Table 2A
Table 3
Table 3A
Table 3B
Table 4
etc...Try Numbered list
http://blogs.adobe.com/indesigndocs/2009/04/numbered_lists_part_iii_figure.html -
How to design a smartform with below tables and table-fields??
How to design a smartform and driver program using this tables and table fields
FIELD DESCRIPTION TABLE-FIELD
Tax Invoice No: vbrk-vbeln
Code vbpa-kunnr where parvw = RG
Ship To vbpa-kunnr where parvw = WE
PAN No J_1IMOCUST-J_1IPANNO for WE
ECC ,,
Range ,,
Div ,,
Excise Reg No ,,
LST No ,,
CST No ,,
Invoice No: vbrk-vbeln
Do No: vbfa-vbelv where vbeln = inv no and vbtyp_v = C get the vbeln where vbak-auart = 'ZDO'
Sales Doc Num: vbfa-vbelv where vbeln = inv no and vbtyp_v = C get the vbeln where vbak-auart = 'ZSO'
PO: vbkd-bstkd where vbeln = sales doc no
Delivery No: select vbelv from vbfa where vbeln = inv no and vbtyp_v = J
Goods Removal Dt&Time: select vbeln from vbfa where vbelv = dlv no and vbtyp_v = R Put this vbeln in mkpf and get BUDAT and CPUTM
Selection screen parameter should be : vbrk-vbeln.Hi,
First design your form interface, this is the set of fields that you need to display in your form and create this as a structure in SE11. In your print program code the logic to extract the data into this structure, this is just regular ABAP, nothing special here.
When you have your data call function module SSF_FUNCTION_MODULE_NAME to determine the name of the generated smartform function module. Then call this function module, passing the data collected into your structure. If necessary you will need to find the print parameters required and pass these too.
In your smartform you will need to use the data structure you created in SE11 as the smartform interface and design the layout required to display these fields.
Regards,
Nick -
Is it possible to create graph with in the table / Pivote table.
Is it possible to create graph with in the table / Pivote table.
Emp# Emp Name % Bonus Pay Amt
111 AAA $28276
222 BBB $78878
In the place of Bonus I have to display Bar (Chart) instead of number.
Is it possible in OBIEE? I know we can display chart and table next by next but my user want display just like above.
Please help me on this issue
Thank you very much for your timehi,
it is better for 2 different questions,make 2 differents threads...
You used the 2ond solution(google???),put in the dashboard...html enabled...and check your pdf again.
Moreover,printing pdf with answer is discouraged...always prefer Xml Publisher.
Last,there are 2 fst files which configure the *.pdf files , check them,
http://obiee101.blogspot.com/2008/09/obiee-pdf-controls-fst-files.html
hope i helped....
http://greekoraclebi.blogspot.com/
/////////////////////////////////////// -
Hi all,
in my webdynpro view's content is two-level structure. Under top node is another non-singleton node and within this node another non-singleton node. I would like to display such structured information in PDF Form. I have created Subform (flow content, table) and in this subform another subform (flow content, table row) so I can display information on 1st level. But I have no idea how to display 2nd level. I have tried to create subform in table row subform but I cannot set properties of this subform to flow content and table.
Can somebode help me with this issue?
Thanks,
ZdenekHi Zdenek,
You make your main subform as Flow Content.
Say you have OrderDataNode and OrderItemNode.
Then you create a subform with for Order Data and create the elements. One of the element in this will be OrderItem Subform.
Now define the OrderItem Subform as Flow Content, Table and Table Row.
Make the OrderData Subform as Position Content and Check the box for "Repeat subform for Each Data Item".
This should work as you want.
Let me know if you have any problems.
Regards,
Shubham -
Transporting table and table maintainance generator
Hi,
Can i transport the table and table maintainace generator and function group of the table with in single request or not.
One more thing is when i transport the table maintainance generator,will the entries also be transport to another system or not.
Thanks in advance,
SureshHi Suresh,
Go to SE54-> Utilities-> Total Transport. The following things are transported.
The total transport transports the complete maintenance dialog:
authorization group
authorization group assignment
control entry
events
function groups
maintenance objects
variants
Content wont be transported it seems.
Thanks & Regards,
Nagaraj Kalbavi
Maybe you are looking for
-
Nivo slider in a flash site..?
I have a flash website, and an html website. I use Nivo slider on the html site as a slideshow to showcase images and tagline slides, I'm curious if anyone knows if you can put a Nivo slider slideshow in a flash site? Nivo slider uses jquery, with fa
-
Being billed per month for phone protection
I've just goten billed around $15 for either a warranty or so for my Iphone5s I'd like to cancel the warranty. Once purchacing my phone I was told I'd be billed per month for the warranty but the first month's free. I've lost the phone number I'm to
-
Properties for Accessibility Standards
I have created forms in Adobe Livecycle Designer 8.0 to be used online. In order to make these forms "Accessible" for our website, I need to be able to add form properties and test the accessibility from within Adobe Professional ( this functionality
-
Payment method control in F110.
Hi Gurus, I have a requirement below: 1. payment for vendors with only method 'C' in master file must result always in a valid 'Cheque'-payment regardless the amount 2. payment for vendors with only method 'T' in master file must result always in a v
-
What cameras can send pictures to i pad2 via wifi?
Is there a camera with wifi that can send pictures to i pad 2?