Characteristic value '5000000000 ' of characteristic 0MATERIAL is not MATN1

Dear Experts,
I am getting one error message while extraction,when executing the DTP .the messge is :
"Characteristic value '5000000000 ' of characteristic 0MATERIAL is not MATN1 -converted" BRAIN 68 @3R@
what is the meaning of this messege ,Request you to plese suggest me reagarding the same .thanks in advance .

Hi Bhullar,
Have you maintained material length as 18 at ECC and BW sides.
at bw side info object 0material conversion routine as MATN1. seems like you may be maintained as ALPHA. if your using as ALPHA conversion routine then at transfer rules for MATERIAL you can pass output data by suing FM - CONVERSION_EXIT_ALPHA_INPUT.
or if possible then change conversion routine to MATN1 for material(info obj) at data source level or info object maintenance(RSD1) level.
Thanks

Similar Messages

How to copy characteristic values from Purchase Order to MIGO Goods Receipt

Dear all,
I have a configurable material X,
then i create a purchase order for that material and then i input characteristic value in the Purchase Order transaction and save it
However when i do the Goods Receipt transaction via MIGO and using the Purchase Order number that i have created, after i entry the batch number and want to check the classification, the characteristic value are blank, so it is not copied from the Purchase Order
I've tried guide from
http://help.sap.com/saphelp_erp60_sp/helpdata/en/92/9b4a23a46411d6b28300508b5d5c51/content.htm
but i do not find the configuration for copying rule
Is there any one who can resolve this problem??
Regards,
Marufat

Hi,
You define the copying rules for a movement type in Customizing for Batch Management under Batch Valuation , Valuation for Goods Movement in Inventory Management , Activate Batch Classification for Goods Movements in IM. Please refer below link. Thanking you.
http://help.sap.com/saphelp_me52/helpdata/EN/47/39867251500aa7e10000000a114a6b/content.htm

Ordering Characteristic Values in the order that you restrict them

Hi SAP Network,
I have created a BEx query and used up the 2 structures in the Rows area.
I have then placed a characteristic in the columns area and restricted the characteristic .
This characteristic in essence acts like a third structure.
The ordering of the characteristic values when the query is executed is by alphabetical order.
Are you aware if it is possible to have the same order displayed, as to which you drag the characteristic values onto the characteristic, ie. in the order that you choose.
Thank you in advance.
Simon

Hi there,
No it is not possible to make the characteristics sort by the order in which you restricted them.
One weay you could achieve this is by having a sequence navigational attribute (example values: 1,2,3,4,5,6,7 etc) and in the sorting of your characteristic use sort by attribute.
Best Regards
Mark

Error when inserting Adhoc characteristic value next time through SDK

Hi,
while inserting an adhoc characteristic value to person through algorithm with different effective dates its working fine
for the first time but for the second time its showing error like "morethan one row matches the specified criteria"
--while entering manually through front-end its allowing to insert two values for the same characteristic type with different effective dates but if we edit any one of them its showing same error ......
can any one help me out in this? Is there any restriction that there should be only one characteristic value for one characteristic type in an entity?
thanks
sivaram

Suggestions for your ODP.NET code.
1.
using Oracle.DataAccess.Types;
OracleBlob myBlob = new OracleBlob(con);
myBlob.Write(myByteArray, 0, count); //where myByteArray is populated by a file stream and count is the number of bytes to be written to myBlob
cmd.Parameters[0].Value = myBlob;
2. Check only when it's not null then dispose blob object, command object, and connection object. (No need to close connection before dispose)
This is not relevant to the issue.
Edited by: shsu on Jan 12, 2012 4:16 PM

No characteristic value of the material in PO

Hi,
I am testing the configuration material. I've maintianed a class of class type 200 in BOM, and get the PR after running MRP. No any field or view in PO to display the characteristic value of material. How to get it? I thought it should be display somewhere in PO and in the GR view, because the buyer should know what product they should get and the inspector should know what should be inspect and the pass level.
Thanks!

Hello,
I checked all the tab in PO and PR, but no any icon to see the characteristic.
I've created a PO for a material which was maintain a class of class type 001, then I've seen the icon 'configuration'.
Is it necessary to maintain a class of class type 001 for the material related class item in BOM? The on line help told that could create some materials with different characteristic value of one characteristic assigned to a class of class type 200, then maintain this class in BOM. System will pick the right material according to the characteristic value in SO.
I am confused that why have to create some materials to do that because this application is to reduce redundance of material. I thought one material is enought, which will be required by the characteristic value and taking this value in PO. Do I have to maintain the class 001 for this? If yes, how can I get the characteristic value of class 001 from same charactieristic in the class 002?
Lin
Edited by: liang_yielin on May 18, 2010 11:46 AM

Characteristic value

hi,
I have assigned the characteristic, class to the particular material.
For example for material A->class--->c203
assigned characterics are length=2mm
                                          width =6mm
I want to know these characteristic value for this material in table.
what are the tables to refer?
thanks
Bhuvaneswaran

Hi,
Check the tables given below:
KLAH                   Class Detail
CABN                  Characteristic Detail
AUSP/CAWN       Characteristic Values
CAWNT               Characteristic Value Texts
KSML                  Characteristic Allocation to Class
KSSK                  Material Allocation to Class
Regards,
Rohit.

Numc characteristic values are not saving in AUSP

Hi All,
I am unable to save numc/Date type characteristic values in AUSP table using CL20N tcode. i am able to retrive CHAR values from AUSP table but NUMC / DATE values are not saving in this table.
Regards,
Praveen

Hi Praveen,
If you are fetching ATINN from AUSP table, then you need to use conversion routine..
Call the FM CONVERSION_EXIT_ATINN_* & you will get the converted value.
Thanks,
Sharath

KE0C133 : Characteristic value does not exist for charact KMVTNR

Hi Gurus,
In my system i have the field CO-PA KMVTNR, assigned to KNVP - LIFNR.
When i try to create a shipment cost, i get the error: "The characteristic KMVTNR (Sales employe) should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value is not valid in CO-PA."
I have debbug, and the problem is that in report RK2FVPKE, check that my value is not a valid PERNR. And it is not, because i am assigning a lifnr number not a pernr number.
I not allways get this error, when i create the same shipment cost in other case. What make that the system check that the value is a valid pernr or not?
thanks

Hi Luis
To me, it seems logical that if the pernr is not there, the system gives you an error
In the cases where it did not, can you check if valid pernr exists?? If you create a wwxxx char "without own value maint", it should not check for the valid pernr. But with kmvtnr, I am sure it will check
Br. Ajay M

Not able to fetch characteristic Value(ATWRT)

Hi expert,
By using CLAF_CLASSIFICATION_OF_OBJECTS Function module I am only able to the characteristic description
from AUSP1 field . But My requirement is to fetch the characteristic value(ATWRT) when we are creating or changing MM01 or MM02.
Could you please tell how can i get characteristic value.
I have found out one BAPI BAPI_CLASS_GET_CLASSIFICATIONS where characteristic value(CHAR_VALUE field )has been maintained but message is showing BAPI_CLASS_GET_CLASSIFICATIONS has been obsolete. So can I use is BAPi into my program?

hello rajib bali ,
see if this helps you
1. if you have MATNR and WERKS select single CUOBJ from MARC table
2. Pass this CUOBJ to VC_I_GET_CONFIGURATION
Hope it helps...
Thanks and regards

Populate Batch characteristic values in create sales order BAPI

Can anybody help me in populating the batch characteristic values using BAPI_SALESORDER_CREATEFROMDAT2?
I have checked the related notes provided by SAP, like, 567348 but it will be great if someone can send some code snippet on this.

Subramanian, Brad and Raja.
Thanks for your suggestions its were useful, with
these i can resolve my problem.
!!! Best Regards !!!
Raja
I used the se37 to test bapis, is more easy and fast !!
and you can save data like variant, and you can simulate the real execution without write any code abap,
and re-process the times that you need,
when you know what fields you need you write your abap code faster.
Thanks !!!
Message was edited by: Noemi Huerta

BI-IP change characteristic value in FOX

Hello Guys,
i want to change the characteristic value in FOX.
Therefore the FOX runs through all char combinations to identify the highest
number for the char test.
This step works fine, but i cant write the value for maxloop in the cube.
If i try, only the old row is deleted, but i dont get a new row with the calculated value for maxloop.
the code looks like this:
DATA LOOP TYPE test.
DATA MINLOOP TYPE test.
DATA MAXLOOP TYPE test.
MINLOOP = 00000.
MAXLOOP = 00000.
FOREACH LOOP.
MINLOOP = LOOP.
IF MINLOOP > MAXLOOP.
MAXLOOP = MINLOOP.
ENDIF.
ENDFOR.
MAXLOOP = MAXLOOP + 00001.
{Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
Any suggestions what is wrong here?
Regards
T. Mekler

Hi,
You have written
{Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
But as per the statement MAXLOOP = MAXLOOP + 00001 the MAXLOOP conatins a new figure. Obviously there will not be any record in the cube for this value of MAXLOOP.
You are assigning this to the record with MAXLOOP = 00200, so system is assigning zero to 0AMOUNT for the record that is having MAXLOOP=00200 value.
Make the below corrections and test again:
DATA NEWLOOP type test.
NEWLOOP = MAXLOOP + 00001.
{Amount, EUR, #, #, NEWLOOP, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, MAXLOOP, 00000000, #, 2007, #, #, #, #, #, #, #}.
Regards,
Deepti

How to get Characteristic Values assigned to the line item of Sales Order?

Hi,
I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
this fn. mod. giving all the Characters but not the assigned characteristic values.
Is there any other way to find characteristic values of sales order.
Thanks,
vinayak.
Message was edited by: vinayaga sundaram

For example, please see this example program.
It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
report zrich_0001.
* Internal Table for Characteristic Data
data: begin of i_char occurs 0.
        include structure comw.
data: end of i_char.
data: xcabn type cabn.
data: begin of xcawn,
      atwtb type cawnt-atwtb,
      end of xcawn.
data: xvbap type vbap.
parameters: p_vbeln type vbap-vbeln,
            p_posnr type vbap-posnr.
start-of-selection.
select single * from vbap into xvbap
             where vbeln = p_vbeln
               and posnr = p_posnr.
clear i_char. refresh i_char.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
       exporting
            instance           = xvbap-cuobj
       tables
            attributes         = i_char
       exceptions
            instance_not_found = 1.
loop at i_char.
    clear xcabn.
    select single * from cabn into xcabn
             where atinn = i_char-atinn.
    clear xcawn.
    select single cawnt~atwtb into xcawn
               from cawn
                 inner join cawnt
                   on cawn~atinn = cawnt~atinn
                  and cawn~atzhl = cawnt~atzhl
                      where cawn~atinn = i_char-atinn
                        and cawn~atwrt = i_char-atwrt.
    write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
endloop.
Regards,
RIch Heilman

Hi. i used Function module to change Characteristic values of a sales order

hi. i used Function module to change Characteristic values of a sales order..
but sales order's Characteristic values didn't change.
And the Function module doesn't occur any log message.
please tell me wrong code, and how to solve this problem.
if i have wrong method, what data can i pass to change the characteristic values
DATA: LT_E1CUVAL TYPE TABLE OF E1CUVAL.
DATA: WA_E1CUVAL TYPE E1CUVAL.
DATA: LS_CFG_HEAD LIKE CUXT_CUCFG_S,
 LS_INSTANCES LIKE CUXT_CUINS_S,
 LS_VALUES LIKE CUXT_CUVAL_S,
 LS_E1CUCFG LIKE E1CUCFG,
 LS_E1CUINS LIKE E1CUINS,
 LS_E1CUVAL LIKE E1CUVAL,
 LS_PROFILE LIKE E1CUCOM,
 LS_VBAP LIKE VBAP,
 L_CUOBJ LIKE INOB-CUOBJ,
 L_ATINN LIKE CABN-ATINN.
DATA: LT_INSTANCES LIKE CUXT_CUINS_S OCCURS 0,
 LT_PART_OF LIKE CUXT_CUPRT_S OCCURS 0,
 LT_VALUES LIKE CUXT_CUVAL_S OCCURS 0,
 LT_VAR_KEYS LIKE CUXT_CUVK_S OCCURS 0,
 LT_KSML LIKE KSML OCCURS 0 WITH HEADER LINE,
 BEGIN OF LT_CLINT OCCURS 0,
 CLINT LIKE KSSK-CLINT,
 END OF LT_CLINT.
DATA: LT_CUIB LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
DATA: E_ROOT_INSTANCE TYPE CUXT_INSTANCE_NO.
DATA: EV_ROOT_PERSIST_ID TYPE IBEXTINST_DATA-EXT_INST_ID.
DATA: EV_CFG_HAS_CHANGED TYPE XFELD.
DATA: EV_HANDLE_APPL_LOG TYPE BALLOGHNDL.
DATA: L_CUOBJ_NEW TYPE CUOBJ.
DATA: L_OWNER TYPE IBXX_BUSINESS_OBJECT.
REFRESH LT_E1CUVAL.
CLEAR LS_VBAP.
SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
 FROM VBAP WHERE VBELN = I_VBELN
 AND POSNR = I_POSNR.
IF SY-SUBRC <> 0.
 RAISE INSTANCE_NOT_FOUND.
ENDIF.
REFRESH LT_CUIB. CLEAR LT_CUIB.
LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
APPEND LT_CUIB.
CALL FUNCTION 'CUCB_INITIALIZER'
 EXPORTING
 IT_INSTANCES = LT_CUIB[].
CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
 EXPORTING
 I_ROOT_INSTANCE = LS_VBAP-CUOBJ
 IMPORTING
 E_CFG_HEAD = LS_CFG_HEAD
 ES_PROFILE = LS_PROFILE
 ET_RETURN = ET_RETURN
 TABLES
 E_TAB_INSTANCES = LT_INSTANCES
 E_TAB_PART_OF = LT_PART_OF
 E_TAB_VALUES = LT_VALUES
 E_TAB_VAR_KEYS = LT_VAR_KEYS
 EXCEPTIONS
 INVALID_INSTANCE = 1
 NO_ROOT_INSTANCE = 2
 INSTANCE_IS_A_CLASSIFICATION = 3
 INTERNAL_ERROR = 4
 NO_PROFILE_FOUND = 5
 INVALID_DATA = 6
 OTHERS = 7.
IF SY-SUBRC <> 0.
 CASE SY-SUBRC.
 WHEN 1.
 RAISE INSTANCE_NOT_FOUND.
 WHEN 3.
 RAISE INSTANCE_IS_A_CLASSIFICATION.
 WHEN OTHERS.
 RAISE INVALID_DATA.
 ENDCASE.
ELSE.
 LOOP AT LT_VALUES INTO LS_VALUES.
 IF LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
 OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
 LS_VALUES-VALUE = '7100010'. "This is test data
 MODIFY LT_VALUES FROM LS_VALUES.
 ELSE.
 DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
 ENDIF.
 CLEAR LS_VALUES.
 ENDLOOP.
ENDIF.
영업정보 특성 변경
CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
 EXPORTING
 I_CFG_HEADER = LS_CFG_HEAD
 I_ROOT_INSTANCE = LS_VBAP-CUOBJ
 I_PLANT =
 I_STRUCTURE_EXPLOSION_DATE =
 I_STRUCTURE_EXPLOSION_APPL_ID =
 I_LOGSYS =
 IS_PROFILE = LS_PROFILE
 IV_ONLY_SINGLE_LEVEL =
 IV_HANDLE_APPL_LOG =
 IV_OBJECT_APPL_LOG = 'CIF'
 IV_SUBOBJECT_APPL_LOG = 'T_CNFG'
 IMPORTING
 E_ROOT_INSTANCE = E_ROOT_INSTANCE
 EV_ROOT_PERSIST_ID = EV_ROOT_PERSIST_ID
 EV_CFG_HAS_CHANGED = EV_CFG_HAS_CHANGED
 EV_HANDLE_APPL_LOG = EV_HANDLE_APPL_LOG
 ET_RETURN = ET_RETURN
 TABLES
 I_TAB_INSTANCES = LT_INSTANCES
 I_TAB_PART_OF = LT_PART_OF
 I_TAB_VALUES = LT_VALUES
 I_TAB_VAR_KEYS = LT_VAR_KEYS
 I_TAB_BLOB =
 EXCEPTIONS
 NO_CONFIGURATION_DATA = 1
 NO_ROOT_INSTANCE = 2
 INVALID_INSTANCE = 3
 INSTANCE_IS_A_CLASSIFICATION = 4
 INTERNAL_ERROR = 5
 NO_PROFILE_FOUND = 6
 INVALID_DATA = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
 CASE SY-SUBRC.
 WHEN 1.
 RAISE NO_CONFIGURATION_DATA.
 WHEN 3.
 RAISE NO_ROOT_INSTANCE.
 WHEN 3.
 RAISE INVALID_INSTANCE .
 WHEN 3.
 RAISE INSTANCE_IS_A_CLASSIFICATION.
 WHEN 3.
 RAISE INTERNAL_ERROR.
 WHEN OTHERS.
 RAISE INVALID_DATA.
 ENDCASE.
ENDIF.
COMMIT WORK.
save configuration with next commit
CLEAR: LS_INSTANCES.
READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
L_OWNER-OBJECT_KEY = LS_INSTANCES-OBJ_KEY.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
 EXPORTING
 ROOT_INSTANCE = LS_VBAP-CUOBJ
 ROOT_OBJECT = L_OWNER
 IMPORTING
 NEW_INSTANCE = L_CUOBJ_NEW
 EXCEPTIONS
 INVALID_INSTANCE = 1
 INVALID_ROOT_INSTANCE = 2
 NO_CHANGES = 3
 OTHERS = 4.
IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
 CLEAR LS_VBAP-CUOBJ.
 RAISE INTERNAL_ERROR.
ELSEIF SY-SUBRC = 1.
 LS_VBAP-CUOBJ = L_CUOBJ_NEW.
ENDIF.
What's wrong?
help me to solve this problem.
Thanks a lot.

SD_SALES_DOCUMENT_READ Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
SD_SALES_DOCUMENT_READ_POS Reads sales document header and item material: tables VBAK, VBAP-MATNR
SD_DOCUMENT_PARTNER_READ partner information including address. Calls SD_PARTNER_READ
SD_PARTNER_READ all the partners information and addresses
SD_DETERMINE_CONTRACT_TYPE
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
SD_SALES_DOCUMENT_COPY
RV_ORDER_FLOW_INFORMATION Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod

Fox formula - Copy variable value to a characteristic in IP

Hi All,
I have to copy the value of a variable to a characteristic in Fox formula in IP. In this scenario I am forecasting data using copy function. Whenever new data is copied I need to save it as a new version. So in the fox formula I have mentioned only 'version' as the field to be changed. I get the value of version automatically from a function module. In BPS I think it is possible but I am using IP.
Example.
Copied data
Customer Material Version Year Qty
c1            m1          0           2012 10
c2            m2          0           2012 20
c3            m3          0           2012   15
This is the reference data got as a result of copy function. In the code I get the version computed from a function module in variable fm_version.
I wrote the logic like this.
data lv_version type version.
foreach lv_version.
{0quant_b, lv_version} = {0quant_b, fm_version}
endfor.
When it is execute it is showing error as records changed and deleted.
Is it the correct method or is there any other workaround.
I would realyt appreciate your time and effort.
Thanking you,
Jerry Jerome

Hello,
You can use either standard copy function or fox formula.
So here I need to make the version as 1 since it is forecasted for the first time. I am trying to do it with a fox formula. In the fox formula I am trying to change the characteristic value of version from 0 to 1.
You can not change the characteristic value of version from 0 to 1. The copy function or fox formula will copy the key figures from version 0 to 1.
For example:
The transaction data contains data like -
customer     material            year     version    qty
c1                 m1            2012     0           10
c2                 m2            2012     0            5
After copy you will get both version like this
customer     material            year     version    qty
c1                 m1            2012        0        10
c2                 m2            2012        0         5
c1                 m1            2012        1        10
c2                 m2            2012        1         5
Thanks.
With regards,
Anand Kumar

Value 'KIRBYu00A0' of characteristic 0SORTL contains invalid characters

hello experts!
i am facing this error while activating 0vendor. data not available either in info object master neither in psa.
Error Message: Value 'KIRBY ' (hex. '004B004900520042005900A0') of characteristic 0SORTL contains invalid characters
Message no. BRAIN060
Diagnosis
Only the following standard characters are valid in characteristic values by default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.
Furthermore, characteristic values that only consist of the character # or that begin with ! are not valid.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 004B004900520042005900A0).
Procedure for System Administration
Try to change the invalid characters to valid characters.
If you want values that contain invalid characters to be admitted into the system, make the appropriate setting in BW Customizing. Refer to the documentation describing the requirements for special characters and the possible consequences.
For more information on the problems involved with valid and invalid characters, click here.
regards
vijay

Hi Vijay,
after KIRBY is a characteristic value which cannot be interpreted by BW properply / is not in the valid char list.
KRIBY is hex value 004B0049005200420059
the invalid char is hex value 00A0 -> online hex converter didn't found a ASCI match.
To solve the problem you will need to fix the record in the source. Or you go to PSA -> delete all in teh field and re-enter KRIBY.
Best regards,
Axel

Characteristic value '5000000000 ' of characteristic 0MATERIAL is not MATN1

Similar Messages

Maybe you are looking for