Charger AC-15E With Charger AC-3E

Dear Friends
I Would Like to ask some question please, i have Nokia E6 and Nokia 2865
Nokia E6 come with AC-15E Charger and Nokia 2865 come with AC-3E Charger
i use AC-3E to charge my nokia E6 is there any consequences ?
Because i check in AC-3 - Compatibility There is no Nokia E6 in the list :
http://europe.nokia.com/find-products/accessories/all-accessories/power/chargers/nokia-charger-ac-3/...
Both Charger  technique specification,
AC-15E
Input      AC 100-240v
               50-60 Hz,180 mA
Output   DC 5.0 v, 800 mA
AC-3E
Input      AC 100-240v
               50-60 Hz,60 mA
Output   DC 5.0 v, 350 mA
Best Regards
Solved!
Go to Solution.

durvenz wrote:
Will I find the same condition if I use AC-15E to charge battery Nokia 2865, so I can charge  faster ?
@durvenz
If you input into Google "Nokia Fast Charger AC-15 compatibility" top of your results should be entry "Nokia Fast Charger AC-15 is compatible with all Nokia phones with a Nokia 2 mm charging connector." to answer your query.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Issue with magsafe/charging (blinks green, amber, off)

    Having a quirky issue with my mid-2009 Macbook Pro.
    A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
    At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
    Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
    But the problem still exists.
    The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
    I have reset the SMC a couple times actually, but no change.
    Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
    Thanks!

    Try resetting the system management controller
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    If that did nothing for you,  try resetting the NVRAM
    https://support.apple.com/kb/HT1379

  • Ipod not recognized by windows, itunes, and will not charge with pc.

    yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
    -1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
    -2nd, windows gave me a message saying the hardware could not be recognized.
    -3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
    i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

    Hello
    I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
    I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
    I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
    Any help would be much appreciated.l=

  • Froze upgrading ios 6 on connect to itunes screen not recognized by itunes and wont charge no power with usb

    The guy at the Apple store said "Now thats a Brick" "I've never seen or heard of one this bad!"
    I bought the phone with little to no info on it. I was told that it froze after several failed attempts at loading IOS 6.
    Now... It will only turn on if plugged into wall, it will show black, then apple, then "connect to itunes" screen and thats it. As soon as I unplug, it dies. If I try power off, it turns back on and freezes in same place. Reset, same. And unabale to Factory restore cuz I cant unplug from wall. Im asuming its in dfu, nothing works.
      When connected to USB,no power, no response from pc (win xp) or Itunes. Although... I swear I heard pc beap once as though it "found new hardware" but on inspection, Nothing.
    My theories: 1) Battery is hooped. ( but I was told it worked fine a month ago) The longest I have had it charging is 4hrs and i died as soon as removed.
                        2) VCC conductor. Would explain USB issue.
                        3) The phone was "jailbroke" and IOS6 did not like that. Isnt there programs to reverse this?
                        4) IOS6 interupted, then phone got factory restored. Is it possible there is No "OS" on it?
    I never touched an Iphone untill 2 days ago, and I have read and tried every troubshooting solution I could find. If I can fix this I'll be an expert!
    Any help appreciated.

    Hello, chipperp. 
    Thank you for visiting Apple Support Communities. 
    Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue persists, try the troubleshooting steps in the first article below.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • Can no longer charge Nano with the USB cable

    My iPod Nano (1st gen) won't charge via the USB cable any more. It will sync if there is enough battery life when I hook it up to the USB cable. However, if I leave it hooked up, it gets drained of all it's battery life. Fortunately I have a wall charger and a car charger and both of them will charge the Nano. It's a lot more convenient for me to charge it via my computer, but that's not possible any more. Is my Nano dying or is it possible the USB cable is damaged? If it's damaged, how can it sync but not charge? Why can I charge with other power sources but not the cable? Unfortunately, I don't have another iPod cable to test if the cable is damaged. If my Nano is dying, can you give me a rough estimate as to how long it will be before it stops charging all together. (I need to prepare my spouse for the upcoming iPod Touch purchase that will appear on credit card.)
    Thanks.........Julie

    Here's my own trial and error analysis of my problem. I hooked my iPod up to my old G4 PowerBook and tried to charge it from there. It didn't charge but it also didn't lose any more power that I could tell. I then hooked it up to my MacBook's first USB slot. I heard that the first slot has more power than the 2nd slot due to the way the 2 USB ports are configured. Unfortunately, the iPod appeared to have lost some power, i.e. the USB port drained some of the power from the iPod.
    I'm guessing I need to take it in to have my USB ports checked out. I prefer to take it to an Apple store with a Genius bar that is 3 hours away instead of to our "local" Apple repair shop that is an hour away. I have Apple Care and I believe my local shop will still charge me for time.
    Thanks for the suggestions. Until I find a day when I can take the long drive, I'll just charge my iPod from with a wall charger. I'm grateful the iPod syncs and I have an alternate way to charge.

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • Issue with Taxes getting Posted to Customer Account in case o Free of Charg

    Hi All,
    We have a requirement in our project where we need to pay tax to government on   giving free of charge items to customers in a Sales order along with normal items.
    But the tax should be not be charged to customer but to be born by us ( Selling company).( Since itu2019s a free of charge   , so customer should not pay the tax)
    The Legal  rule  is that tax should  be calculated on Cost of Goods .
    We have done the necessary configuration to calculate this tax but when the  account posting happen this tax is getting charged to customer account .
    We want to change the configuration so that this should not be charged to customer but to be paid by us,
    For example .
    Product Selling Price = 1000 GBP
    Free of charge , so 100 % discount = -1000 GBP
    Net value of item  = 0 GBP
    Cost of Good  = 100 GBP
    Tax rate = 15 %
    Tax = 15 GBP
    This 15 GBP should not be charged to customer account   but to be paid by Selling company.
    If anyone has faced a similar scenario  and can give some  pointers, please suggest.
    Regards,
    Divyanshu

    Dear friend,
      Maintain R100 condition type ie 100% discount in the last step of your pricing procedure, so when ever you sell item with TANN item category the value will become ZERO. Try this and let use know.
    Regards,
    Sudhir

  • Moving average price in case of goods receipt with free of charge

    Hello everyone,
    Need some inputs......
    Sometimes we receive materials from suppliers free of charge (e.g. warranty replacement) u2013 moving average goes down u2013 worst case 0,01 EUR/piece. This causes problems in government reporting and export documentation EX1 and clearance/pro-forma invoice) for deliveries to field engineers (Order type ZIS1, ZIS3 u2013 item cat. ZICA), because moving average price is used for the values in government reporting and on the invoices. In government reporting and on invoices we need to state a true value of the part.On the other hand, the value warehouse stock is depending on the moving average cost as well.Could you please let me know, how to handle such receipts from the supplier to have a correct stock value and correct values on invoices and government reporting?
    Thanks
    Deepthi...

    Hello Deepthi,
    It depends on your company policy. If you want to valuate the material along with the material purchased handled in moving average price, free consignment will bring down the MAP for the material.
    In that case, you can revaluate the material to the original price in MR21 transaction.
    If you are not going to handle the materials received free of charge along with the purchased material, you can go with another material code, with non valuated material type.
    But i guess, no company will be asking for another material code. So go for revaluation after the receipt of free consignment.
    Regards

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Error message charging is not supported with this accessory

    I have an iPhone 3GS from Jul 2009. Fully updated. I normally charge it using a USB port on my MacBook Pro so it also syncs at the same time. This week began getting an alert on my phone which said "charging is not supported with this accessory". I resolved initially by unplugging/replugging the cord. In all cases the phone had been charging for some time before the alert appeared. In most cases the phone was sitting on the same surface as the macbook and had not been moved since beginning charge.
    The only support document I can find refers to firewire and does not apply to my device.
    Since starting this week it is happening more frequently and may require being re-connected several times.
    It is still intermittent issue but I depend on my phone.
    Thank you for your assistance

    I just found some on eBay for about 1.99 each with free shipping and ordered about 6 of them from the seller, I think they came from China so it takes a couple weeks. So far I never got a bad cable, but if you do use eBay please check their feedback to make sure they have a history of delivering quality cables and working cables. Always pay using PayPal if possible so you don't lose your money. There are online sites like Meritline and such that have cheaper cables for direct sales with PayPal checkout and free shipping.
    I use the 6' cable in the car, so I don't have figure where to put the iPhone or iPod when plugged into the stereo and it is helpful to have them when trying to charge when the plug is being a dresser or something when I travel.
    I also like the retractable cables ($0.99)
    I also have the Scosche FlipSYNC Keychain cable too, a bit expensive, but you always have a cable with you just in case.
    Message was edited by: cls24

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Since updating to I.O.S7 on my ipad2 all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all?

    all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
    What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resetting

    Please see: http://support.apple.com/kb/HT1808 for further info.  It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
    Regards,
    Steve

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • Bought app in order to sync itunes with a blackberry playbook.  Now Itunes will open on my computer but when i plug  my ipods in to charge or sync, itunes is not showing that they are plugged in. Cant charge or anything!

    Obviously not too smart with all this technology.  I puchased a Blackberry Playbook Tablet and wanted to sync my itunes music, so following directions on the Playbook, I downloaded this app - Daniel Bingham Itunes sync - and when I went to my pc, I pulled it up, plugged in my Playbook and it did sync all my music from my Itunes library to the Playbook.  However, now when I plug an ipod in my pc to charge or sync more music, my pc is not showing it recognizes any of my ipods being plugged in.  It makes no mention of any of my ipods being connected!  I also keep getting this "Found New Hardware Wizard" box that keeps popping up everytime I plug an ipod in - it originally showed up when I had Playbook plugged in to download all its info (I think) but it never completes, saying not compatible - so I click cancel. I have since clicked on remove New found hardware but it still pops up. Why does it continue to show with every Ipod now?  Any idea on what I can do to repair this situation?  Please help!

    You performed all of the steps outlined in this link?
    http://support.apple.com/kb/TS1567
    You uninstalled and reinstalled iTunes?
    GB

  • Charging issues with g2 shuffle

    Hi,
    I have a iPod g2 shuffle. I have purchased 2 units because I thought the first one was defective, but here is my problem. When I plug my G2 onto the docking station and pull up itunes the orange led light is on and solid and when I load my music it naturaly blinks orange because it's uploading music. I proceed to load my music and eject my ipod when done using the eject button provided on itunes. Once closed out of itunes my orange light stays solid, indicating a charge until green. This is where it gets frusterating. If I take my ipod off the docking station, use it for a little while and then return it to the docking station to just charge only WITHOUT pulling up itunes, the orange light blinks constantly. I have tried other computers and it does the same thing. I have to pull up itunes, wait until the orange light shows solid for charging, then close out of itunes just to get it to start charging. Has anyone else had this problem? I called tech support and the Apple store, and they can't explain it. I was under the impression that you could just plug in your docking station to any computer and connect your G2 and just charge your ipod without itunes being up. Can anyone explain this? Thanks for your help!!!

    This is nice to know and solves one problem I've had
    as well. My other problem is also related to
    charging. The g2 shuffle is my wife's and even if
    she doesn't use it and leaves it turned off all day
    long the charge only lasts about 8 hours. According
    to everything I've read it should last a month turned
    off and not being used, but I have to charge it
    constantly or she can't use it at all. I charged it
    right before going to bed a couple of nights ago and
    the next morning when she took it with her to the gym
    it was completely dead. It was NOT on at all until
    she tried using it the next morning, and with the 2nd
    gen shuffle it's easy to tell when it's off since you
    actually have to slide the button to the on position.
    Does this sound like I need to just replace it? I
    bought it online from Apple only a couple days
    before Christmas so it's not even two weeks old yet.
    If you have fully charged the battery (to get the green light on the LED) and it can't hold a charge (when turned off) longer than 8 hours, you have a bad battery.
    If you can't charge it until you have a green LED light, then you may not be charging it through your USB port as you think you are.

Maybe you are looking for

  • Can't see iCal in .mac account

    I am brand new to Mac and apologize if this is dense of me. . . .I can't find my iCal in my .mac account. I've published it, synchronized everything and still can't see it. Is there a special place I should look or something else I need to do? Also -

  • Exception HAndling B2B 11g .AQ Integration

    Trying to catch the B2B exception for 850 and send it to SOA. I have used AQ integration for B2B.Please tell me how to implement this in soa

  • Can't seem to find my iPad in new iTunes!

    How do you find your device in the new iTunes?    I used to just plug in and it would appear in the panel down the left hand side of iTunes.   The new version seems different.   How the heck to I find my device so I can edit the content?!?

  • Prem Pro 2.0 audio capture

    Have camera setup for on camera mic tracks 1/2 and extra mic for PTC on track 3 - how do I captureaudio track 3? using adobe capture Thanks for any help - appreciated

  • Question marks at top of folder

    Hi Helping a friend with his computer. when he opens a folder, at the top underneath the name of the folder are two question marks side by side. anyone know what this means?