Charges not apportioned to items in PO

Hi All,
For a purchase order, we received delivery in 2 shipments.
The charges (freight, landing) is being apportioned only for the 2nd shipment
and not for both. This should not be the case since it should be apportioned to both shipments.
There are more that 900 items on this PO.
Does anyone has any idea how to correct this?
Thank you.
Malini

Hi
Where did you handle your conditions in PO at headr level or item level? If header level it will get apportioned automatically .
Best Regards
SAM

Similar Messages

I have been charged several times for items I have not ordered or received...Paradise Cove App

I have been charged several times for items I have not ordered or received...Paradise Cove App.
On a few dates I have attempted to purchase items on Paradise cove...then been billed several times for items I never received.
please remove these charges.
Tony Starace

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

I bought a charger not long ago and it had just stopped working is there something i can do to fix it?

I bought a charger not long ago and it had just stopped working is there something i can do to fix it?

Hi Amandarendalll,
If you are having issues with an iPod accessory that you purchased fairly recently, you may find the following Service page helpful (Apple Accessories is the last item on the list to the left):
Apple - Support - Service Answer Center
Accessories are covered under the coverage of the iPod they are included with, or under their own warantee if purchased seperately, as noted below:
Apple One (1) Year Limited Warranty – Accessory - For Apple and Beats Branded Products Only.
Regards,
- Brenden

Forwarding agreement can not release; Check items and calculation sheets.

Hi Experts,
While releasing status of a forwarding agreement to getting error message "Agreement can not release; Check items and calculation sheets''.
Please refer the screen shot attached and suggest.
Thanks & Regards,
Shaktiprasad Dash

Hello Shakthi,
Firstly, have you maintained TCCS in your forwarding agreement?
You migt have inserted new item. However, there are no TCCS maintinaed in that agreement item.
In such cases those error messages are displayed. Restricting you from releasing the agreement.
Other cases:
is your TCCS local?
If your TCCS is global then ideally the charge usage should be any of the below: "customer", "Customer & service" or "ALL" for Forwarding Agreement to consume it.
For Local TCCS by defalut charge usage will be set to "Customer".
If Local, check whether have you missed any mandatory fields like amount, Currency.
If there are any % charge line, then the refrence number would have been missing or you might be referencing incorrectly.
For Global TCCS if any of the above is incorrectly maintianed it will not allow you to save the TCCS.
If you can attach the screenshot of the TCCS it will be helpful for me to solve your issue.
Best Regards,
Dimpu

TS1368 CHARGED TWICE FOR SAME ITEM....PLEASE FIX THIS PROBLEM.

11/23/12 order MGK8JL6NJJ INVOICE 214042327611 CHARGED TWICE FOR SAME ITEM.. TRYED TO DOWNLOAD 3 TIMES 2 X GOT ERROR AND TOO TRY AT LATER TIME 3RD TIME WENT THROUGH RECIEVED ITEM. PLEASE FIX THIS PROBLEM. THANKS

These are user-to-user forums, you are not talking to Apple here. You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
For future info typing all in capitals is considered shouting, and may mean that people don't reply to your posts.

Turning roundup off...and not taxing an item

Hi I am running Pages '08 which I use for making invoices.
I notice that I cannot add a cell without it rounding it up. For example if I did 6.5 hours of work it rounds it up to 7. It also does this for taxes. It will round up 8.17% to 8.2. How do I turn this off?
Also, I need to bill for a reimbursement which I do not want to charge tax. Is there a simple way to not tax that item?
Thanks,
Gary

Set the number of decimal places to one or two, in the Tables Inspector.
To not charge tax, edit the formula to charge 0% tax.
Peter

Error when deleting file: Could not find this item. This is no longer located in ...

We are setting up a new Windows 2012 server. Users access this server using a 'terminal services'. We have mapped some folders from a legacy server (different domain). Using group policy preferences, we map this folder as a drive for a user.
When user wants to delete some files, he get's the error: 'Could not find this item ..' The error is displayed to the user and it looks like the file can't be deleted. But when I press the F5 (refresh) button, the file is gone. My problem is very similar
to a problem in the following post: http://social.technet.microsoft.com/Forums/windowsserver/en-US/042e747a-0e25-4190-b0a2-82f3e9635eb0/can-not-delete-file-error-is-could-not-find-this-item?forum=w7itprogeneral
When I create 'txt' (or 'pdf', 'zip') file, i can delete it without the error. When I create 'xlsx', 'docx', 'pptx', 'bmp', 'jpg', I get the error.
Does somebody have an idea, how can I fix the cause of this problem? (I can't tell to users to hit the F5 button everytime when they face this issue)
Thank you for your help in advance!
Juraj

Hi,
Please check if the problematic files’ filename ended with a dot. If so, you could refer to the article below to troubleshoot the issue:
Solved: “Cannot read from the source file or disk”
http://blog.dotsmart.net/2008/06/12/solved-cannot-read-from-the-source-file-or-disk/
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Windows 7 error: Location is not available or Item not found

I'm using windows 7 ultimate. I have a directory on a 1TB external usb drive called "1976 T.N.T". I am neither able to access this directory nor am I able to delete it. When I double click to access it windows says -
Message Title: "Location is not available"
Message Text: J:\Music\Library\Rock-Metal\ACDC\1976 T.N.T refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet
or your network and then try again. If it still cannot be located the information might have been moved to a different location.
When I try to delete it windows says -
Message Title: Item Not Found
Message Text: Could not find this item.
This item is no longer located in J:\Music\Library\Rock-Metal\ACDC. Verify the item's location and try again.
I have tried the following -
1. Deleting file using command prompt but that doesn't work
2. Check disk with both options "File system errors" and "Bad sector recovery" selected - it does not report any errors and the problem persists
3. Rebooting the computer
4. Disconnecting the drive and connecting it to my xp pro laptop (messages on xp are slightly different but to the same effect)
Any suggestions short of formatting the drive will be appreciated.

The cause of this is as follows:
The directories in question were created or last modified by a process other than Windows Explorer. This process created a directory name with a space at the end. When you created a duplicate directory, the exact directory name you created was therefore
not exactly the same; it had no space on the end. That is why both directories with the apparent same name could coexist.
Note: if you attempt to create a directory from within Windows Explorer with a space on the end, the process explorer.exe is designed to prevent this from happening. That's why it's never usually an issue.
To reproduce this problem, you could do the following:
1) Create C:\foo
2) Create C:\bar
3) Use Robocopy to create the erroneous directory using the following command:
robocopy "C:\foo" C:\bar" /E
Notice that I missed the first double-quote on the target location. Robocopy should have responded with an error, but due to the way it interpreted my input, it didn't.
Now you will see a directory called C:\foo\bar
Except this directory is actually: "bar " - the word "bar" with a space on the end.
Now try deleting C:\foo altogether. It won't because there is a directory underneath it that has an invalid name.
Now try entering C:\foo, and creating a second directory called "bar". This will work, and there will appear to be two directories named "bar".
But this time you can go up a level and delete "C:\foo".
Put it down to a bug in Windows, a bug in Robocopy, whatever you like! That's the reason though...

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple in the past asking letting me know a purchase had been made and asking if I had made the purchase, but the item listed has alway been a purchase that I had made. Since I had received similar emails in the past, I didn't think anything of it. Because I had not purchased the item listed, I immediately clicked on the link in order to change my password, which has been suggested in authentic emails i had received from Apple in the past. The site I was redirected to was exactly the same as the Apple site where you go to change your password. I entered my userID and password and it stated a verification email would be sent, if it was not sent click "resend email." When I did not receive an email, after about 10 seconds I went to the Apple site and followed the SAME EXACT step on pages that were IDENTICAL to the FRAUDULENT website I apparently had just been at. When I clicked "Send verification email," I DID receive an email within seconds, which had a special link that brought me to a page where I could change my password, which I did. I later compared a legitimate email to the FRAUDULENT email and I DID FIND A DIFFERENCE, BUT IT WAS ALMOST UNNOTICEABLE unless you were really, really looking. I doubt it would be noticed by anyone if not comparing it closely to a real email. THE DIFFERENCE WAS AT THE BOTTOM OF THE AUTHENTIC EMAIL, THERE WERE THREE LINKS THAT COULD BE SELECTED - My Apple ID/Support/Privacy Policy. ON THE FRAUDULENT EMAIL THESE LINKS WERE NOT PRESENT!!! Just today I received an email from Apple stating my password had been changed today. I did not change my password today. When I changed after getting the fake email, I did not think about my SECURITY QUESTIONS!!! If you forget your Apple password, you are able to answer the security questions in place of your ID and you get a confirmation email. Even though I changed my password within a one minute when I did not get a confirmation email with a link to change my password right away and I went dierctly to Apple's site, apparently it was enough time to take all the information on my account - INCLUDING MY DEBIT CARD NUMBER, WHICH HAD BEEN REQUIRED WHEN I INITIALLY SET UP THE ACCOUNT!!! Today I received a call from VISA FRAUD PROTECTION asking about strange activity on my account and stating they were concerned and wanted to ensure I had used the account. I HAD NOT, AND ALL THE MONEY IN MY BANK ACCOUNT HAD BEEN STOLEN!!!!! I am writing this in hopes that many people will see it and NOT FALL VICTIM TO THIS SCAM. Please pay close attention to any emails you supposedly receive from Apple - If the links "MY APPLE ID/SUPPORT/PRIVACY POLICY," PLEASE DO NOT ASSUME IT IS AN AUTHENTIC EMAIL FROM APPLE. I suggest you immediately forward the email to apple, which I didn't do because this happened days ago. Nothing was taken from my money that was already on the Apple account, and nothing had been taken from my checking account. I guess I assumed there had been something wrong with the link in the email directing me to where I could change my password, plus I had gone to the valid Apple website and changed my password for real, and I guess I was thinking that changing my password would prevent someone from being able to acces my account info. PLEASE DO NOT FALL VICTIM TO THIS SCAM AS I DID!!!!

No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC

FINSTA Bankstatement does not clear Open Items

Dear SAP guru,
I am experiencing an issue where FINSTA bankstatement generated in IHC module does not clear Open items in reciving company code. I would like to get the system to search for the document based on the original FI document number and clear it. The situation is
The bank statement successfully processed has an original document number and processed.
In IMG for EBS, I configure as algorism used is 20 - Document number search and Bank Posting type 4: Clear Debit GL account
Clearing account - and have the posting with relevant document number matched with the bankstatement.
It seems that the system does not find the matching at all.
Could any of you shed some light on what I am missing???
Kind regards
Taro

Creating or even using something like a data migration account is the best way.
Are you saying that you have a GL account with say 100 line items and you want them all cleared. If that is the case you wont need a LSMW, make sure you know the amount, and then create a journal posting to your new GL account, and select all items in the GL account you want to clear.
If there are various GL accounts, again no real problem, in F-03 which is what you would be using, you can enter more than GL account so that should not be an issue.

HT1386 I have IPod touch running iOS 5.1.1 and Windows 7 with iTunes 11.0.4.4. When I connect the IPod to my PC, iTunes recognizes it but before synching can get very far, it is interrupted by "charging not supported on this acc." Now what to do?

I'm having trouble with the wi-fi synch for iTunes and would be happy if I could just synch by the USB cable. With the new iOS, the connection to iTunes seems to get broken every time the dreaded "charging not supported with this accessory" appears, which is only a few seconds into the synch. Since my PC is obviously not an Apple brand charger, IPod won't stop producing this message. Using the Dismiss button doesn't resolve the issue because synch has already stopped. It looks like the hardwire to PC option is now dead.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

Intermittent problems with iphone 3g "charging not supported"

I notice quite a few complaints about intermittent 'charging not supported' messages.
I have been getting the same message on my iphone 3g.
I have ELIMINATED the cord and plug as the problem in this case by the following method:
I found that by LOWERING the line voltage to the charger with a variac, I could get rid of the message RELIABLY for a period of time.
By turning the variac off and on, and by varing the voltage setting, I can reproduceably get either charging or 'charging not supported'.
Since there are no changes being made in the connections to the phone and charger, I eliminate them as causing to the problem.
I suspect a deteriorating component in the charger is reporting some kind of error to the phone via some communications channel.
I have not tried opening the charger, but if and when it finally dies, I will do so.
This morning, the charger worked with the variac set to 80 volts.
Anyone on the design team around that can suggest other tests?
-bz-

The unit finally failed and I opened it up. It appears to consist of an AC-->dc converter with suitable filters and regulators and a small computer that probably talks via I2C or a similar protocol to the iphone.
I suspect that components are defective and the output voltage is outside the range it thinks it should be or some problems with the communications cause it to send an erronious message in response to the query sent by the iphone. I did NOT see any obviously bulging electrolytic capacitors, but I did not test for high ESR and I suspect that is the problem.
A 'off brand' AC Charger of iPod and iPhone from Radio Shack works fine while BOTH authentic APPLE iphone 'tiny cube' chargers are going for recycling.
Software fixes may cause the iphone to either keep trying until it gets the right response or ignore the erronious responses.

Charges not apportioned to items in PO

Similar Messages

Maybe you are looking for