Charging Nano w/ ipod4G adapter

I have an ac adapter for a 4G 30gig (I think) ipod. Can I use this to charge my ipod nano?

Yes, it will charge fine with it.

Similar Messages

  • Ipod nano 3g is not being recognised by my laptop(running win XP sp2) nor it is getting charged by an AC adapter

    My i pod nano is not being recognised by the computer(XP SP2) nor it is getting charged by an AC adapter..iTunes does not recognise it.
    Used all the troubleshooting tips and enabled disc use too..all these efforts were in vain....Need some quick tips!

    Big Big thank you to Varun at Apple Service & Support e-mailed me the following article and after following the instructions, I'm up and running. Thank you ......
    Link: http://www.info.apple.com/kbnum/n305136
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • Charging Nano with firewire?

    I have one of the firewire Power Adapters with the dual-cable dock connector that I charge my 3G 20gig iPod with.
    Can I use the same power adapter to charge an ipod nano, or would I be forced to buy a USB power adapter, just so I can use the included USB cable? I read somewhere that firewire isn't supported by the Nano, but I'm not sure if this would apply in cases of just charging from a power adapter.

    Hey Derek,
    iPod nano will charge from Firewire. Infact i am charging mine with the same set up as you. I have the nano charging with firewire and syncing with USB
    iPod will not sync over firewire. It will only sync with USB.
    *nathan

  • HT4060 Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged informatio

    Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged information. How can I get it to charge beyond 1% so I can proceed to troubleshoot?

    I have had your exact problem with my old 3GS, now I cannot even get it to turn on, I still see that it is supposed to be charging though, but it never charges any so it seems.
    I replaced the Lower Dock Connector Assembly back when it still charged while hooked to my PC, and it found it made no real difference.
    http://www.amazon.com/gp/product/B003Y5YXLK/ref=oh_details_o05_s00_i00?ie=UTF8&p sc=1 
    At this point I am not sure if I should replace the battery and hope for the best, or just junk the phone, I cannot really sell it if I cannot reset it...

  • HT4060 My I pad 2 is not charging throuh USB Power Adapter but it is chrging from computer through USB (with sign of no charging). Would  you please give any solution for that?

    I have facing problem of charging my I pad through USB power adapter. It is not giving any response when connected to power adapter. When it is connected with USB port of computer it is charging with sign of "not charging" and it takes long time to cahrge. please help me to sove my problem.

    I have no idea why the iPad would not be charging with another power adapter but will charge thought the USB port on your computer. Try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
    If that doesn't help, I think that the next thing that I would try would be to reset all settings. Settings>General>Reset>Reset all settings. If you do this, all device settings will have to be re-entered and tha does take some time to do.

  • Battery won't charge even if AC adapter is on-line

    I recently installed Arch on my R61 Thinkpad. I did not have any problem I couldn't solve until today when I noticed that my battery won't charge anymore.
    acpitool's output is:
    Battery #1 : charged, 95.85%
    AC adapter : on-line
    Thermal zone 1 : ok, 48 C
    Thermal zone 2 : ok, 45 C
    Battery level will not go higher than this percentage, but will get lower if I unplug the adapter.
    I don't know what is the source of this problem.

    how old is the battery? how often was it recharged? batteries usually lose capacity over time. try to discharge and recharge it completely.

  • TS1538 My 4 month old iPhone 5s stopped charging, original cable with adapter works fine on other iphones

    My 4 month old iPhone 5s stopped charging, original cable with adapter works fine on other iphones.
    I have tried restarting iPhone while its connected to my macbook pro and when it restarts, I see it starts charging again.
    After this, when I plug phone to wall outlet, it works perfectly and charges but next day again it stops charging.

    Will Apple cover this under warranty if the port is damaged due to unknown reasons as its under 1 yr warranty?
    Also, I am out of USA now and would like to know if I can send it through a friend and get it checked out by Apple tech...
    Never has any iPhones of all generations that I owned gave such problem.

  • HT201209 My ipod will adapt to a wall charger and it will adapt  To my I-home but not my computer

    My ipod will adapt to a wall charger and it will adapt
    To my I-home but not my computer it is just going on and off
            With the apple sign but no
        Functions will happen what should I do
    <Edited By Host>

    please refrain from providing personal data, this forum is publically accessible to anyone and you're not addressing Apple or its employees here, only fellow product users.
    Regarding your issue:can you explain in your native language because it's not quite clear.

  • My new iPad mini will not charge when plugged into adapter. Any suggestions?

    my new ipad mini will not charge when plugged into adapter. What should I try?

    Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Battery is not charging Power source: power adapter

    I am very confused by my MagSafe power adaptor.
    Often I get : "Battery is not charging Power source: power adapter" with an orange LED on the adapter, Last time this happened the battery was 65% charged
    Right now I have NO led on "1:33 until full. Power Source: Power adapter"
    Sometimes, I get a dim green LED
    Each of these becomes normal on removing and reseating the adapter.
    The spring loaded pins are perfectly sprung and are clean. The receiving bit of the laptop is clean. The adapter clicks in perfectly. The battery is new enough (and this happened when the battery was replaced anyway, and beforehand).
    This happened since I got a new style adapter, the one where the cable is parallel to the Macbook, not the one where it sticks out at 90 degrees. I have two of these, and it happens with both.

    I let the battery drop to 71% and connected the cable. Orange LED.
    Now we are at 87%, just clicked up to 88% with No LED showing.
    0:52 until full (was 0:58 when it said 87%)
    Power source: Power Adapter
    I have done all the checks in the link you gave me, done them to the letter. Pins look good, receptor looks good. My lead is the L shaped one. The adapter is the 60W one
    89% now, 0:49 until full
    Obviously it is 'working', but weirdly
    System Information:
    Battery Information:
      Model Information:
      Serial Number: [redacted]
      Manufacturer: SMP
      Device Name: bq20z451
      Pack Lot Code: 0
      PCB Lot Code: 0
      Firmware Version: 201
      Hardware Revision: 000a
      Cell Revision: 165
      Charge Information:
      Charge Remaining (mAh): 4820
      Fully Charged: No
      Charging: Yes
      Full Charge Capacity (mAh): 5373
      Health Information:
      Cycle Count: 106
      Condition: Normal
      Battery Installed: Yes
      Amperage (mA): 1390
      Voltage (mV): 12443
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes): 15
      Disk Sleep Timer (Minutes): 10
      Display Sleep Timer (Minutes): 10
      Wake on AC Change: No
      Wake on Clamshell Open: Yes
      Wake on LAN: Yes
      Current Power Source: Yes
      Display Sleep Uses Dim: Yes
      PrioritizeNetworkReachabilityOverSleep: 0
      Battery Power:
      System Sleep Timer (Minutes): 15
      Disk Sleep Timer (Minutes): 10
      Display Sleep Timer (Minutes): 2
      Wake on AC Change: No
      Wake on Clamshell Open: Yes
      Display Sleep Uses Dim: Yes
      Reduce Brightness: Yes
    Hardware Configuration:
      UPS Installed: No
    AC Charger Information:
      Connected: Yes
      ID: 0x0100
      Wattage (W): 60
      Revision: 0x0000
      Family: 0x0085
      Serial Number: [redacted]
      Charging: Yes
    By the way, the orange LED is now on (how random is that?) 91% 0:37 until full
    This is not a mission critical fault, just a weirdness

  • Can i charge my new nano with old adapter

    can i charge the new nano with a old ipod nano power adapter?

    thank you, is it possible to use any usb outlet charger for the nano not just made by apple, from what i heard some works but some people's ipod got fried idk
    It's hard to tell for certain, but if you are going to use a third party USB AC Charger, I would check for different reviews online for whether or not they are compatible with your iPod. Just double check for input and output voltages it works with and compare it to those that your iPod Nano can handle.
    B-rock

  • IPod Nano + USB Power Adapter (+ Universal Dock)

    Hi,
    I've got an iPod Nano and a USB Power Adapter to charge it. Untill a few days ago it went fine, even with my Universal Dock between them. But since 2 days my iPod only charges when I put the Power adapter direcly into the wall plug, but with my Hi-Fi installation I'll have to use it with a multiple socket.
    Does anybody know why and how to get round this?
    Thanks
      Windows XP  

    possibly a fuse blown in the multiple socket plug?? or even in the power adapter itself

  • Connecting nano to AC adapter

    I have an AC adapter for my ipod Classic. Can I use this adapter to charge my new ipod nano generation 4?

    Depends on if the wall charger charges via USB power of +5V or Firewire power of +12V. If it charges via the Firewire pins on the iPod, it won't work on the new 4th Generation iPod.
    The good news is, if it does charge via Firewire, you will simply get a message on the iPod's screen telling you it won't work. It won't actually damage anything, so go ahead and plug it in and see if it works.
    Cheers,
    Patrick

  • Charging with A1070 power adapter

    Just bought a Nano 4th gen, tried to charge it with my A1070 Adapter. I know some older adapters won't work, but going through web support pages it seems this is one of the ones that should work.
    Can someone advise please?
    Thank you.

    This is from another post, it might be helpful,
    http://www.amazon.com/dp/B001HN6CVA/?tag=googhydr-20&hvadid=2655063891&ref=pdsl_15z29ty07eb
    I have the same issue. My old ipod cable for wall outlets wont charge it but my old USB cable does, go figure. Other than that link im not sure there's anything else to do.

  • How to Charge Nano 7th Gen Ipod

    7th Generation Nano Ipod
    1.  When plugged into the automobile USB for playing music (system: Entune Toyota) is the Nano also being charged?
    2.  Is the Nano charging when plugged into the USB in a PC desktop computer that is on?
    3.  Can the Ipad 2 electric connection (10 watt USB Power Adapter (using house power (110 volts)) - the little square white connector used to recharge the Ipad 2 batter) be used to charge the Nano?  That is, instead of inserting the Ipad 2 into the connector to charge the Ipad, can I insert the Nano's USB connection into the connector to recharge the Nano? 

    1.  Found it does charge in the Toyota.
    2.  Still pending.
    3.  Probably best not; disparity between ipad and ipod (10 versus 5 watts).

Maybe you are looking for

  • If statement not working/being run

    I have a button which makes a panel flip 180 on the x axis if its name is not in an array called "panes", it determines this by running an if statement. If its name is in the array then the button should run some code to make the panel flip back. How

  • Problem in Starting the Analytical Server

    Hi, I was instaled the Hyperion 9.3 license,Shared services, Aanlytical servers in my PC successfully it was running. But after restart my system The Analytical server get corrupted it was not started. After runnig the configuration utility it was wo

  • FCP X freezes "Restoring the window layout"

    Hello everybody, I downloaded Final Cut Pro X, and at startup, the software freezes, showing "Restoring the window layout". I tried all the solutions indicated on the web, nothing works... (deleting preferences, deleting layout, using PreferecencesMa

  • Problem with iText pageEvent.

    I am creating a PDF document using iText and writing some tables to it. On page end event of PDFWriter I am creating footer. method :onEndPage(PdfWriter pdfwriter, Document document) My problem is that this event is getting called twice. so some tabl

  • Biztalk WCF Cutom Adapter

     Actually my WCF Custom adapter is pointing to my local machine SQL now ineed to point to my Dev environment the same send Port like my local machines URL is mssql://HDUPEDEVBIZ\Biztalk/AfmsDevice? i have to change now to mssql://HDUPEDEVSQLDB02\INST