Charm Issue - Won't Migrate to Prod

Hi
We are testing ChaRM in our DEVELOPMENT Solution Manager.
We are testing ZMHF and pushing a transport from DEV > QAS > PROD.
The transport was successfully release and imported to QAS successfully. However, the import to PROD did not work.
There is two possible reasons why:
1) Our DEV and QAS systems are on EHP5. Our PROD system is on EHP7. Please note, these are ALL test systems!!!!!! There is no way in the world we would have this setup in our real environments Our real environment is all EHP7 haha. Given this is purely for testing, we thought we would just test with three available dummy systems...two which happened to be EHP5 and one which was EHP7.
Anyway, in the Import Queue for Production it states "Does not match component version". I'm assuming this is why the ZMHF does not import. I have also tried importing via the Task List (and have clicked the option to IGNORE INVALID COMPONENT VERSIONS)....this still didn't import.
My first question is should the Maintenance Cycle Task List import Urgent Corrections (ZMHF) as well? I believe it should?
I then tried importing via STMS into PROD (and checked the IGNORE INVALID COMPONENT VERSIONS) and it worked. I was then able to close the ZMHF in ChaRM.
Did it not import from ZMHF Directly and Maintenance Taks List because of the INVALID component versions?
OR
2) I noticed in the Alert Monitor for our PROD system the following:
Plug-in SAP_CTS_SERVICE is not registered in bootstrapper.
Also in the task list for the import I noticed the following:
What exactly is SAP_CTS_SERVICE Plugin or cCTS plugin??? Is this needed for ChaRM? Or is this warning something I can ignore? If it's 100% required, which systems does it need to be installed in?
Also, is this the reason why it didn't migrate to Prod?
Thanks so much!!!!!!!!
Shaun

All sorted.
Installed the CTS plugin and the warning disappears...although this wasn't the issue.
The test system we had setup had the wrong transport domain in SMSY.
All good now.
Cheers

Similar Messages

Migrating from Oracle to SQL Server - data won't migrate but no errors

I'm attempting to migrate a database from an Oracle 11g (11.1.0.7.0 64-bit) database to a SQL Server 2008 R2 (10.50.4033.0). I'm using SSMA, and the Oracle tool was installed on the target SQL Server by the DBA. I've completed all the steps up
to and including synchronizing the database, and the empty tables all exist in SQL Server. When I run the step to migrate the data, I get:
Migrating data...
Analyzing metadata...
Preparing table POLICYS.LOGINS...
Preparing data migration package...
Starting data migration Engine
Starting data migration...
Data migration operation has finished.
   0 table(s) successfully migrated.
   0 table(s) partially migrated.
   1 table(s) failed to migrate.
Then a summary box appears, and there is a red X next to the table (I'm trying to just convert 1 small table to begin with.) What immediately appears to be wrong is that the "To" table is blank.
I've attempted this multiple times, different tables (initially tried all tables) and tried both Server Side and Client Side migrations with the same result. There are no errors or warnings on the Error List.
I've found another online post where the user had the same issue, but in that instance they fixed it by changing the case of the table name. I tried that, but it didn't help. I'm not sure what is wrong that it won't migrate any data. Any help
is appreciated. TIA
-George

Hello,
Please review the migration process steps from the following tutorial:
http://blogs.msdn.com/b/ssma/archive/2010/08/27/migrating-oracle-s-sample-hr-schema.aspx
You can also get help writing an email to
[email protected]
For more information, please read the following article:
http://msdn.microsoft.com/en-us/library/hh313173(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Outlook Users connection issues after Mailbox Migration from 2007 to 2013

Hi,
We have a coexistance between Exchange 2007 SP3 and Exchange 2013 CU7. There is an issue when after migrating the user from exchange 2007 mailbox to exchange 2013, the outlook keeps on prompting for password when it is being launched. Checking the Connection
Status we found that there is a connection to the old 2007 Server and the type is Exchange Public Folder. I have migrated the public folder and checked the Mailbox of the user and found that the DefaultPublicFolderMailbox is set to the 2013 Public Folder Mailbox.
If I check my 2013 MailboxDatabase Properties, It sill shows that PublicFolderDatabase Properties is still pointing to the 2007 Public Folder Database. Any resolution on this?
Another issue is, We set outlook anywhere on the 2013 to use basic authentication, however, when users are migrated to 2013 the Outlook client changes to NTLM. even if we set the outlook to basic to make it work, it still comes back to NTLM after a while.
I did most of the resolutions online to use powershell to make changes to outlook anywhere but no luck. any suggestions is highly appreciated.
Thanks & Regards,
Arthur

Hi,
For the first problem, please check the msExchHomePublicMDB attribute for mailbox database in Exchange 2013, you can check this attribute in ADSIEdit.
If this attribute is pointing to Exchange 2007 public folder database, please set to blank. After that, please restart the information service.
And for the second question, I suggest we open a new case for this issue. In order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one
issue per thread in order to find a resolution efficiently.
Thanks for your understanding.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Bus Rules won't migrate - 11.1.1.3

Hi,
We have 4 applications. We use LCM and migrate all the artifacts from Dev to Test. For all applications, everything comes over. Except in one application the Bus Rules do not migrate. The LCM process complets with 'Successful' too, thus there is nothing in the logs to indicate why they don't show up in Calc Mgr.
Anyone have any idea why/how only one apps BR's won't migrate?
Also is there a utility similiar to formdef utility for webforms that migrates BR's?
Thanks

Try exporting from EAS:
http://download.oracle.com/docs/cd/E12825_01/epm.111/hbr_admin_help/export.html
If you are using calc manager:
http://download.oracle.com/docs/cd/E12825_01/epm.111/calc_manager_help/cmgr_export.html
Cheers..!!

Why won't Mail.app rules won't migrate, System Tiger to System Leopard?

Hi,
Mail.app rules won't migrate from System Tiger to System Leopard.
Here's what I did:
-- Clean install of System Leopard 10.5.6 onto a new Mac Pro.
-- Used Migration Assistment to move files from System Tiger to System Leopard 10.5.6.
-- Mail.app's rules failed to migrate.
So, I manually finder-copied MessageRules.plist into the proper folder to replace the newly created and empty rules set in System Leopard's mail.app, and afterwards, the rules then showed up in mail's preferences.
However, the "manually migrated" [finder copied] rules won't run.
In order to narrow the scope of the problem, I moved the former System Tiger's mail.app rules to the desktop and allowed mail.app to re-create a new rules plist file, then I created a test rule and it worked.
Questions:
Why won't System Tiger's mail.app rules files migrate to System Leopard, and won't work upon manual migration?
What is the remedy to "properly import" the rules to the new [System Leopard based] mail.app, or to make the manually moved rules plist file work?
For what it's worth I did follow the procedures at
http://discussions.apple.com/thread....9306&tstart=90
in order to make the messages migrate, but that failed to affect the rules.
Thanks much,
Jack

Here's the fix, along with recommendations for Apple programmers.
http://www.macfixitforums.com/ubbthreads.php/topics/463491#Post463491

Possible permissions issue - i used migration assistant from a backup and now i have multiple issues

Hi everyone,
I'd say my techie skills are low to medium so bare that in mind and be gentle with me
So 20" dual core died on Friday. poss psu issue which i will fix in due course. In a fit of extravagance I decided this message from beyond the grave from MR JObs was telling me to buy a new quad core on Saturday morning.
Because old imac was dead i used time machine back up via "migration assistant"
intially it could see the back ups but then seemed to spring to life after 20 mins
Got message saying not all content had transferred but reckon most did except for some safari stuff ( paswords etc).
Then i started to get issues with permissions i think.... asked me for passwords every time i tried to move files between folders or to trash or do pretty much anything.
read something about permissions conflicts when migrating from another admin/home account from and old imac
That when i started to activate my over "confident with technolgy" gene - i set HD permission to owned by "me" instead of system and then applied to all enclosed items
oops
now getting lots of dodgy messages eg every driver on the make brings up eeor message sayuing it was incorrectly installed
ran permissions repair - 25 mins later loads of unexpected acls have been corrected though not all -
still getting error messages about a few which i tracked down manually one by one and, sure enough, are still showing as owned by "me" and not system. Corrected them
Noticed at this point all other .kext files in same loaction have two permissions rows for "system in "get info" window = is this the root of my problem since using migration assitant?
still having issues
software updates won't install via the "software update" function but was able to install a couple of them myself direct from apple website.
back ups won;t back up to drive assigned - just keeps saying T|ime machine could not complete the back up even though there is space on freshly formatted external drive
so guys ..
have just created an unholy mess?
should i reassign "system" as owner for everything and then change foders such as documents and music etc to be owned by "me" or is that tooo simplistic?
should i wait till my old mac is brought back to life and re-do my migration ( since deleted the existing back up from old imac so thats not an option)
should i blame it all on apple and get them to sort it out under warrenty
or should i run naked down the street shouting wibble...
all help gratefully received . MY experience of apple products has been seamless over the years until now and I can't help think I have done some thing bad the wife will never forgive me for
HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

You may not have created a mess, it's possible you simply don't know where your data is after migrating. Had you followed the Setup Assistant's on-screen prompts when you initially turned on your new system you would be running just fine by now. My guess is you haven't been exposed to Pondini's Lion Setup Assistant tips.
Migration Assistant (MA) and Setup Assistant (SA) are cousins, similar but different. The primary difference is MA creates a new user account which can be confusing to some users. If you successfuly migrated then log out of your existing using account and you should see the new user account. Log into that account then you should see the migrated data. If you do then use Pondini's Transferring files from one User Account to another.
However if you have totally made of mess out of things then I'd start over, this time using the Setup Assistant Tips beginning where he discusses Second Chance.

Why won't migrated files show up in search or in "all my files" despite being perfectly accessible?

I have just migrated all my files to a new macbook pro from an old macbook pro and ì have stumbled upon a minor issue: all my files are here, and work perfectly fine, but they won't show up if I do a search in finder or in "all my files" until I modify them (for a microsoft word document anyway). Music that I play will show up in search but not in "all my files" if is not included in the itunes folder in my music, but if it comes from the itunes folder it won't show up in either even if I play it. Is there an easy way to solve this problem? It's not too much of an issue but opening every file or attempting to make it show may be cumbersome.

Hey there Cabocel,
it sounds like you're not seeing all you files in your All My Files list as expected. It seems to me like you need to re-index your Spotlight. The following article will help you do that:
Spotlight: How to re-index folders or volumes
Thank you for using Apple Support Communities.
All the best,
Sterling

Printers won't migrate correctly from 2k to xp

We use Personality Migration from ZENworks 7. Everything seems to be working ok except for the printer migration. I'm able to export the settings from a win2k installation, but when I try and import them back to a windows xp installation the printers don't migrate correctly. Usually it will spray printer icons on the desktop and then bring up the add new hardware wizard. If I cancel out of the new hardware wizard most of the printers install correctly, but sometimes the printers just don't import. I can see them in the registry, but they don't show up in the control panel. They won't show up either if I just try and reinstall them. I have to completely remove the printer from the registry and then reinstall.
I've seen a couple other threads on this with no responses. Is there no work around for this?
Eric Becker
WWT - End User Systems
314-919-1655 (Office)
314-608-3806 (Cell)

Eric
Had the same issue. I'm going to guess the printers are IP based? What is happening is DNA can't see printers that aren't in the default Windows cabs/drivers. So, if it can't find the driver, it runs it's own "add printer" routine, which puts the icons on the desktop.
We tried restoring, then running some reg hacks to delete the icons and reset some registry keys (the runonce key in particular). It didn't work because when you run a restore, it unloads Windows Explorer to do so...which unloads the nal. When done, it reloads Explorer, not the NAL. So, if you do a restore and then try to do "run after" scripts, the nal isn't there to finish them out.
The commercial version of the product has a script that will prevent Windows Explorer from closing....but the Novell version doesn't. Using the registry hacks can help you brute force the problem, but without the script, you are stuck.
We gave up. All our printers are iPrint, so we don't migrate them, customers have been acceptable to go install them again from the maps.
IF you happen upon a good solution, please post it.
thanks
Jeff Ferris
Network Manager
512.239.1041
[email protected]
>>> Eric Becker<[email protected]> 7/20/06 9:43 AM >>>
I tried installing ZEN 7 SP1 Personality migration and the problem persists.
Eric Becker
WWT - End User Systems
314-919-1655 (Office)
314-608-3806 (Cell)
>>> Eric Becker<[email protected]> 7/14/2006 9:09 AM >>>
We use Personality Migration from ZENworks 7. Everything seems to be working ok except for the printer migration. I'm able to export the settings from a win2k installation, but when I try and import them back to a windows xp installation the printers don't migrate correctly. Usually it will spray printer icons on the desktop and then bring up the add new hardware wizard. If I cancel out of the new hardware wizard most of the printers install correctly, but sometimes the printers just don't import. I can see them in the registry, but they don't show up in the control panel. They won't show up either if I just try and reinstall them. I have to completely remove the printer from the registry and then reinstall.
I've seen a couple other threads on this with no responses. Is there no work around for this?
Eric Becker
WWT - End User Systems
314-919-1655 (Office)
314-608-3806 (Cell)

Item Conversion Template Issue for Oracle Migration - Copy functionality

Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PM

Issue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi

Margin Issue(pdf) in migrating 6i report to 10g

Hi,
After I migrated the report from 6i to 10g, I found the report printing issue comes out. Every report printing is not same as 6i, move the data to left and top about half cm. I searched this forum, I got clue was i can add reports_add_hwmargin into registry, then I can add printer margin into the report. I found it works when i run the reprot from 10g builder. But when I generated it into pdf format through IDS then print out, the problem is still there. How can add printer margin into report with pdf format?
My environment is
app server 10g
report 10g,
windows xp
Thanks in advance.
appcat

Try a Compile All ( Ctrl - K ), then Ctrl - T.
Not sure about XP, but in Vista, the 10g Builder and batch compiler will crash if a PLL Library is not available when the form is compiled.
Make sure the PLL Library is available, and all its objects compile in the 10g setup.
If that does not help, then try a semicolon-to-semicolon replace all, then save the fmb. Then restart the Forms Builder, and open the fmb again, and try compiling.
Here is an old link describing the issue:
Re: FMB size shrinks dramatically

Layout issue while trying Migrate Oracle Report to XML publisher Reports

Hi
I am trying to Convert Seeded Oracle Reports (rdf) to BI Publisher reports, in doing so encounter layout issues. The layout of the RTF , PDF or HTML generated by BI Publisher is different form the text, PDF or HTML outputs generated by the concurrent report. The problem with the BI Publisher template and out put
Is, the lay out is getting distorted .
Steps to archive the migration :
-     download the rdf from the server to local m/c.
-     execute Forms 9i Util rwconverter to generate a xml
-     use the oracle.apps.xdo.rdfparser.RTFTemplateGenerator API to generate a RTF template of the report layout
-     Then use this template to generate a XSL via oracle.apps.xdo.template.RTFProcessor API
-     The Apply the XSL on the XML data output of the report using oracle.apps.xdo.template.FOProcessor to generate RTF , PDF & HTML files.
Name of the Report used for migration “FSG - Report Detail Listing” , responsibility GL super User. This was just a random report we picked-up for trial.
The layout of these files seems to distorted than the layout of the original report output as generated by the rdf report.
Pls suggest some means to resolve this or any pointers towards what causing this could be of help.
-     Shudipto

The process of "converting" an old Oracle Reports rdf into a BIP report is more akin to writing a brand new report in BIP than to what most people would consider a true conversion.
The conversion routine outlined by Oracle just gives you a starting point for converting RDF layouts into BIP, and nothing more. In regards to the data define it does somewhat better generating your queries and XML layout (but honestly, that is the easy part), but even for the data define it will lose your formula columns as well as report triggers.
I have used the converter on several dozen rdf files and I have yet to see one that is better than 10-20% ready for use after the conversion process.
I would strongly suggest that you only convert the reports that you have to convert (for enhancements, modifications, etc). If it ain't broke in old Oracle Reports, dont' try to fix it in BIP.
Scott

MacBook Pro HD issues; won't boot to any drive; need to recover data

*Apologies in advance for the lengthy post. I just want to be sure I include as much detail as possible. Thanks in advance for reading all of this and offering any thoughts and suggestions.
I have a 13-inch late 2011 MacBook Pro running OS 10.7.
The computer recently began booting slower and slower until finally one day it did nothing but show the gray boot screen with the apple and a spinning circle and/or progress bar at the bottom. It won't do anything else. I assume it's the HD; no surprise there. What's killing me is that no matter what I do, I can't boot to any disk, internal or external, can't mount it in target disk mode, and can't repair it or recover data, which is a first for me with any HD. However, the computer still clearly sees the drive, and the drive sounds and runs normally (meaning no clicks; appropriate amount of whirs and such).
What I've done so far:
Reset PRAM — no help
Reset SMC — no help
Boot in Safe Mode — same result as regular boot: gray logo screen with spinning wheel
Disk Utility message:
Verify Disk — "Error: This disk nees to be repaired. Click Repair Disk."
Repair Disk — gets as far as "Checking catalog file" then shows "Keys out of order". Next is "Rebuilding catalog B-tree." Then "The volume Macintosh HD could not be repaired."
fsck — same as Disk Utility: "Keys out of order (4, 22016)", "Rebuilding catalog B-tree", then "The volume Macintosh HD could not be repaired." FILE SYSTEM WAS MODIFIED." ...over and over again
If I hold Option while starting the computer, it gives me only two drives to boot from, regardless of any other external HDs or flash drives I have attached: Macintosh HD (internal), and Recovery HD (internal partition). If I choose Macintosh HD, it's hit or miss whether it prompts the Disk Utility screen or just gray-screens forever. If I choose Recovery HD, it successfully runs Disk Utility every time. Here's the thing, though — if I attach an external HD, it doesn't see it during the initial Option-startup. However, from Disk Utility I'm able to select a startup disk from the menu to restart into. It sees the externals in there every time and lets me select them as startup disks, but upon restart it returns to the gray Apple logo screen with spinning wheel and/or progress bar at bottom. Sometimes it also sees the internal Macintosh HD here, but selecting that is useless. I can't actually boot from any disk, internal or external, running full OS or even just recovery software.
I've tried using TechTool Pro 8's edisk and ProToGo bootable drives, but again, the MacBook only sees them from Disk Utility only (not on Option-start), and I can select them, but it doesn't actually boot to them; it reverts back to gray screen.
I've installed a full version of OS 10.10.2 on an external hard drive, complete with DiskWarrior 4 on it, but same problem as above — it sees it in the "Select Startup Disk" menu, but not in the initial Option-start or successful reboot.
I've tried booting from a DiskWarrior 4 DVD using C-startup. It recognizes and spins the DVD from the get-go. Eventually it boots to it (after about 20 minutes or so of reading the DVD). I'm able to launch DiskWarrior 4 and start a rebuild. However, it goes all the way through "Step 6: Constructing optimized replacement directory... Overlapped files detected: 7 ...Step 7: Finishing construction ...Step 8: Reading from disc, one moment please..." and then the computer kernel panicked. This happened several times. I reset the PRAM again, then retried DiskWarrior DVD boot, this avoided a kernel panic and it got as far as "Comparing directories... Step 9: Recording any file or folder differences; 3,449,089,956 tests..." and then DiskWarrior and the computer both freeze and I have to force shutdown.
The drive will not mount to another laptop in Target Disk Mode.
Disk Arbitrator immediately sees the the faulty laptop HD, but won't let me mount or unmount it. It's just there, grayed out.
Data Rescue 4 is able to see the faulty laptop HD through Target Disk Mode, even though the drive itself will not mount to my desktop. I am able to scan the drive using DR4, and start a data recovery process. However, DR4 is dumping all recovered data into "User Defined" ai (Adobe Illustrator) files, which makes absolutely no sense at all. What's more, the files aren't able to be opened by any program. Even files that it hasn't recovered into ai files, like txt and mpegs, cannot be opened. I've tried recovering from both the drive itself and from a clone of the drive (made through DR4), with the same result each time.
So, all of that said, I guess my first question is what the **** is going on? The drive mechanically is functioning fine, but there seems to be an issue with its readability (and the directory/files?).
What's more, why won't this laptop mount ANY drive? I should be able to Option-boot into any drive, especially if the USB ports, drives, and OS's are all fully functional, right? Is there any workaround I'm missing? Even if the internal drive and data are just screwed, what's causing a total lack of mounting or booting of any drive, internal or external?

Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

Zen Micro Battery Issue: Won't Char

Hello:
I got my Micro for Christmas and really like it so far. I also got lucky and received one of the limited edition ones with the extra battery. However, it doesn't appear that the extra battery charges to full. I have the new firmware and everything, but the second battery won't charge to more than two bars. Has anyone else experienced this, or does anyone else have a possible solution? The other battery works fine.
Thanks!

Thanks for the advice. I ran the battery to dead, and then I plugged it in. However, the player wasn't doing the normal "glow" thing, although it was showing the battery charging icon. I then plugged the player into my laptop, whereupon it started glowing. After putting it back into the regular charger, it worked fine. The same issue happened with the other battery (the glowing stopped, but after plugging it into the laptop it worked again). Weird, but it works fine now!

Major issues: won't load from blue screen backdrop once blue bar fills up

i am hoping someone can help! my computer won't start up once it gets to the blue screen background with the mac os x and apple logo in a silver box. the blue bar fills up all the way and then just stalls. i can't load the utility disk becuase i have a cd in the disk drive. yikes. i have not backed up in a few months.
The problem started occuring after i was experiencing issues with firefox crashing and subsequently finder locking up. after restarting one time this problem occurred. i completed the latest updates yesterday morning.
Message was edited by: metropink
Message was edited by: metropink

Hi! Hold the mouse button down at startup to eject the disc from the dvd drive. Then startup from the install disc and repair the drive as per THIS doc. Tom

Format issues- won't boot from OSX disc

Help!
I've been having some issues with my iBook G4 recently (it seems every program will randomly quit unexpectedly and it's generally rather slow) so I was thinking I would just wipe the drive and start afresh.
But I can't seem to boot from the OSX install disc. There's an option in the disc itself to restart and that didn't do anything and pressing "c" while restarting still starts things up normally. I've tried zapping NVRAM, PRAM, I went through OF and did reset-all and set-defaults (I'm not even sure if that was necessary- I'm desperate!) and nothing will work.
Help, please!

In order to erase your internal hard drive, you have to be booted from something else. I think you could do this from another Mac in FireWire Target Disk Mode, but I have never done this myself.
http://support.apple.com/kb/HT1661
Is there a reason you don't want to use FireWire?
The biggest problem still seems to be that either your disc or your optical drive is not working properly. Even if you do succeed in erasing the drive, there is still the problem of reinstalling the OS. I think there are methods of doing this with FireWire Target Disk Mode, but I have just never done it myself, so I hesitate to give any instructions.
If you can, you might see if you can borrow an external optical drive and see if you can boot using that. If so, you can erase and reformat your internal drive using Disk Utility and reinstall the OS that way. If an external optical drive won't work, there may be a problem with your disc.
Good luck!

Charm Issue - Won't Migrate to Prod

Similar Messages

Maybe you are looking for