Chart Axis Order

Hi All,
I have a report which has a chart, the x axis has quarter details...but I need to put them in ascending order of quarters....like q1 2008 q2 2008 q3 2008 q4 2008 q1 2009.....etc
I am not able to do this change using the existing propoerties? Can any one suggest a solution
Thanks
Natraj

try one thing. in the step 1 of your report design, set the order of the quarter field to ASC and then generate your graph

Similar Messages

Tool tips on chart axis

Is there a way to create a dynamic tool tip for the labels on
the chart axis. For example I have a bar chart that shows the
quantity ordered in 5 categories. I want to be able to add a tool
tip to the category label on the vertical axis to help explain what
the category is. I need this tool tip to change based on the
category that is rolled over. I'm assuming I should be able to do
something with the ToolTipCreate action on an axis renderer but I
can't figure out how to find out which label is being moused over.
Any help would be greatly appreciated. Thanks in advance.

I'm not sure if you're refering to components you can place in containers, but if you are, there's a ToolTipText option in the component inspector for every component you can select. If you want to change the tooltips manually for specific components, you can use the method (Component).setToolTipText(String text). Hope that helps...
hello again,
just one more question :) i was wondering if anyone
knows how to implement tool tips with controls in
JavaForte. i looked through the properties window,
but didnt see any .ToolTipText property.... i know
its possible, and probably just one line of code,
anyone know it? thanks a lot in advance for any help!
talk to ya later,
Steven M. Berardi
[email protected]

Change chart legend order

I have bar chart with legend. I can change chart sort order from Chart Expert. When I change order in chart I can not see same order in legend list. How can I change legend sort order.

Go through the following SAP Note
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303330333933313335%7D.do]
Regards,
Raghavendra

How do I rotate chart axis labels?

Trying to rotaet chart axis labels for the x-axis, but would like to know the same for the y-axis too. Know the solution for a text box, but doesn't seem to work for the axis labels.

Hi Martin,
The solution is the same for X and Y labels. Select the labels and then set the rotation angle, either in the Format Bar or in the Metrics Inspector.
Jerry

How to display PIE chart Axis label horizontally?

Hi
Currently my PIE chart axis label is displying in 2 lines. How make it to display in one line?
Thank you

hi,
For Pie chart there will be no X-axis or Y-axis terms generally.
Label/Text could be one of the following.
Title?
or Sub Title?
or Foot note?
Right Click -> Format Title . Reduce the font size such that it fits into a single line.
Regards,
Vamsee

Chart Axis: Label Renderer pixel width

Am using custom label renderer for Chart Axis labels.
CustomLabelRenderer extends label
override public function set data(value:Object):void
if(value is AxisLabel){
dataValue = String(value.text);
else{
dataValue = String(value);
I would like to get the Width of the Label component in PIXELS on runtime.
Can you please tell me how I can get the pixel width of the labels that gets updated when user changes the screen resolution.
Please let me know ASAP.
Thanks

See this example and the related thread:
http://apex.oracle.com/pls/otn/f?p=31517:222
Basically, you need to customize the chart XML. That is quite easy to do.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Problem replacing chart axis title with &string. syntax

Apex 4.1.1
Hi,
I am having a problem replacing a chart axis title with substitution syntax &P5_MYFIELD., where P5_MYFIELD is an item with Source Type PL/SQL Function Body:
begin
return web_message.show('LASTNAME', 'dk');
end;
The Item is defined on the same Page as the chart in a different region. I can see that function is working ok, because the return value is displayed in P5_MYFIELD.
There is a second item in an other region on the same page where the source value is defined with substitution syntax &P5_MYFIELD. It also displays the expected value. But when I use the string &P5_MYFIELD. as axis title it is not displayed.
I also defined a field P0_MYFIELD on Page Zero with the same function, when I reference that with &P0_MYFIELD. as axis title on Page 5 the value is displayed correctly. I tried the same with a field on Page 1, &P1_MYFIELD. and it is displayed correctly.
I think, the chart axis title must be substituted before the item P5_MYFIELD is executing the PL/SQL function body to get its value. Can anyone tell me why?
We want to use string substitution syntax to translate all our labels in different languages. I would like to create hidden items with source type PL/SQL function body for all labels on a page and reference these values as label definitions. I would like to place them on the same page as the labels.
Thanks
Anne

I started the application again and now also the Items are not displayed, only the message 'Label not defined', so I probably did something wrong with the computation. Why the correct values were shown during the first run, I do not know, maybe i did not logout in between.
Here is the debugging information, but I cannot see any error message:
0.02844 0.00038 Computation point: Before Header 4
0.02881 0.00032 ...Perform computation of item: P5_CYCLE, type=FUNCTION_BODY 4
0.02913 0.00060 ...Performing function body computation 4
0.02973 0.00464 ...Execute Statement: declare function x return varchar2 is begin begin return web_message.show('CYCLE','de'); end; return null; end; begin wwv_flow.g_computation_result_vc := x; end; 4
0.03437 0.00042 ......Result = Wurf 4
0.03479 0.00046 ...Session State: Save "P5_CYCLE" - saving same value: "Wurf" 4
0.03526 0.00027 Processes - point: BEFORE_HEADER 4
0.03553 0.00027 ...close http header 4
0.03580
Edited by: Anne-Marie Rosa on Jun 8, 2012 10:09 AM
Now the correct value is displayed again in the P5_MYFIELD, because I had to set the item source back to PL/SQL Function body, but I am still getting the chart error and the chart is not displayed.
Edited by: Anne-Marie Rosa on Jun 8, 2012 10:17 AM

Urgent: Chart Axis with Min, Max, Help needed.

Hi guys,
I am rushing on a report submodule in our application, which will go on live in a short time. We need to have charts which use min and max value from the table and calculate the appropriate interval as the scale of the axis, instead of the default interval.
I also tried to put page items into the Min&Max in the chart attributes, but always got the error message that asks for a number.
I have searched the forum and the conclusion I can made now, is that HTMLDB does not support parameterized value for chart axis.
So, my question is: if I have to do it manually, how should I do it? I don't have much experiences in pl/sql, so really need some help here.
Any input is appreciated.

Does anybody know whether a chart can be built on a collection? I've tried but didn't succeed.
If somebody has experiences on this, please let me know, so I won't waste more time on trying it if the answer is no. Thanks.

Chart Axis With a Filter

Hi,
I have 7 charts (One for each day of week) and I have put a filter on each chart to show that respective days data.
However I want the Y axis Value to remain the same for each day and i want this value to be the Maximum Value of the entire dataset.
How can I do this.
I have a field called MAX_AXIS but this is only showing me the max axis for that day not the week because of the filter
Thanks

Hi lrj1985,
In order to achieve your requirement, we should set the Minimum value of Vertical Axis with maximum value of the whole dataset as Andrew post. And then set a static value (0, =MIN( Fields!MyValue.Value, "MyDataset" ) or others) as the Minimum value of Vertical
Axis. Then the Vertical Axis will display the max value of the week, not that day.
The screenshot below is for your reference:
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Controlling Chart Axis limits in Interactive Report

I have set up a bar chart in an Interactive Report where the x-axis is supposed to be a percentage. Currently, the bar chart's x-axis goes out to 120. Is it possible to limit it to 100 without having to create a chart region?
Thanks in advance!

Hi Dimitri,
Firs of all thank you for your patience. I do not oblige you to answer or whatever. it was kind of showing you the error.
There are date columns but they were not selected for the chart.
SELECT
     a."FICHE_ID" "N°",
     b."AGENT_ID" "AGENT_ID",
     b."NOM" || ' ' || b."PRENOM" "Agent",
     a."EQUIPE_ID" "EQUIPE_ID",
     c."LIBELLE" "Equipe",
     a."DATE_ACTIVITE" "Journée",
     a."TOTAL_HEURES",
     a."TOTAL_HEURES_EXCEPTIONNELLES" "H. excep.",
     a."FICHE_CREE_PAR" "Fiche créée par",
        a."DATE_CREATION" "Le"
FROM
     "OBSERVATOIRE"."FICHE" a,
     "OBSERVATOIRE"."AGENT" b,
     "OBSERVATOIRE"."EQUIPE" c
WHERE
     a.AGENT_ID = b.AGENT_ID
AND     a.EQUIPE_ID= c.EQUIPE_ID
AND     (a.total_heures IS NOT NULL
         OR a.total_heures_exceptionnelles IS NOT NULL)
group   by a."FICHE_ID" , b."AGENT_ID" ,
        b."NOM" || ' ' || b."PRENOM" ,
           a."EQUIPE_ID" ,
           c."LIBELLE" ,
           a."DATE_ACTIVITE" ,
     a."DATE_CREATION" ,
     a."FICHE_CREE_PAR",
     a."TOTAL_HEURES",
     a."TOTAL_HEURES_EXCEPTIONNELLES"
ORDER BY
     a."DATE_CREATION" DESCThank you
PS if you want we stay here, no problem I you do not want to go further with this thread.

Chart axis with PV

Hi Experts!
I would like to know if is possible configure X Axis with presentation variable. My chart can be periodic data so I would like to see specified X axis only 9000 to 12000 and the other hand with cumulative data I would like to see dinamically axis.
I get this if I create two charts and guided navigation but I want to know if is possible to do it with one report?

Hi lrj1985,
In order to achieve your requirement, we should set the Minimum value of Vertical Axis with maximum value of the whole dataset as Andrew post. And then set a static value (0, =MIN( Fields!MyValue.Value, "MyDataset" ) or others) as the Minimum value of Vertical
Axis. Then the Vertical Axis will display the max value of the week, not that day.
The screenshot below is for your reference:
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Editing chart Axis label

Hi. I have a report where one chart repeats one time, and in Preview, I am able to click on the Axis label and find an option to Edit the label, where I define 1 - 12 as Jan - Dec. However, another chart repeats for 80 or so pages, thus I can't use Preview to edit the label as it effects one chart at a time. Is there a place to edit axis labels in Design?
Thanks!
Robin

Thanks so much for following up on this. To clarify, converting month numbers to names is nice, and I did that using the specified order suggestion, but it doesn't effect the order of say, May, when Jan thru Apr are missing, and in fact created other issues of data misintrepatation I didn't bother resolving at the time.
I suppose the best solution would be something that supplies a placeholder for blank months, so that the Jan-Dec order remains constast and the data graph bars appear in appropriate months, Jan-Apr no bars, May-Dec with data generated bars.
Does this help?

CR4E Chart Axis Label

I have a report developed with Crystal Reports XI Standard that includes a chart. The axis labels for the chart have been set (via Edit Axis Label) and appear correctly in preview mode of the Crystal Reports XI designer (e.g. "District" instead of "Sum of StateReportsView.District").
When this report is exported to a PDF file via a Java program (using Crystal Reports for Eclipse), the axis labels revert to their original values (e.g. appear as "Sum of StateReportsView.District").
Can the axis labels be set before exporting the report via the JRC API?
Or is there some way to save the axis labels to the report using the Crystal Reports XI designer?
Thank you...

Thanks so much for following up on this. To clarify, converting month numbers to names is nice, and I did that using the specified order suggestion, but it doesn't effect the order of say, May, when Jan thru Apr are missing, and in fact created other issues of data misintrepatation I didn't bother resolving at the time.
I suppose the best solution would be something that supplies a placeholder for blank months, so that the Jan-Dec order remains constast and the data graph bars appear in appropriate months, Jan-Apr no bars, May-Dec with data generated bars.
Does this help?

Chart, axis and customize grid and labels

Hi!
I created simple LineChart. Chart is dynamic. It changes when
I choose something from ComboBox.
I want to customize vertical axis (mx:verticalAxis) to show
grid and label for: 0,1,2,3,4...etc.
Now I have:
<mx:verticalAxis>
<mx:LinearAxis interval="1" minimum="0"/>
</mx:verticalAxis>
But It doesn't work. Sometimes I see grid/labels in: 0,3,6
and sometimes 0,2,4,6 !! My maximum is changing but I think it
doesn't matter. I want to show label/grid for each integer number.
How to set it?
Thanks for help! :)
newman

Hi,
Yes you can do this....you need to increase Top value for xtitle in cordalayout.cxml at this location OracleBI\web\app\res\s_oracle10\chartsupport.
Totaly we had five types in this LEFT LEGEND WITH TITLES ,RIGHT LEGEND WITH TITLES ,TOP LEGEND WITH TITLES,BOTTOM LEGEND WITH TITLES,NO LEGEND WITH TITLES.
So based on the type of view you used in you chart,change x and y axis titles,title and legends top,left,width,height as per your need.
I think you used BOTTOM LEGEND WITH TITLES,as per you requirement you need to increase xtitle-top value in order to increase size between x-axis and label.
**Restart Presentation and BI Server*
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/

Bar Chart Sort Order

HI
I'm having a display/sort issue with Bar Charts and cannot find an option in the properties to fix it.
If I have the following in cells B2:C5 in a spreadsheet:
A   500
B   250
C   400
D   750
The Bar Chart will always displays the category labels in reverse order:
D   750
C   400
B   250
A   500
How can I get the Bar Chart to display the Y axis as it's sorted in my spreadsheet?
Thanks
Xcelsius SP1 FP1

Hi Tammy
I think you meant to say:
"Sorry I think this is by poor design"
Do you know if this will be address in future Service/Fix Packs?
Thanks

Chart Axis Order

Similar Messages

Maybe you are looking for