Check box and Drop down in ALV

Hi all ,
I am using ALV to display my output . I am narrating my question in a example ,
For eg : In my ALV in 1st column i am getting check boxes in all the rows but i want the check boxes oly in specific line no's and in the 3rd column i want to use dropdown list , so user can select some datas from the list , Depend upon the user selection in the drop down list i want to display the values in the 4th column .For every selection in a drop down list
4th column should refresh and give the values . So kindly provide some inputs to finish this task .
Note : I am using set table for 1st display and Function Module LVC_FIELDCATALOG_MERGE .

Hi Saravanan.
FOLLOW THIS .
data : gd_layout TYPE lvc_s_layo, "slis_layout_alv,
 gd_repid LIKE sy-repid.
TYPES: BEGIN OF TY_ITAB,,
 LINE TYPE CHAR10,
 CHECK TYPE CHAR1,
 .....................................END OF TY_ITAB..
DATA: ITAB TYPE TABLE OF TY_ITAB,
 WA TYPE TY_ITAB.
wa_fieldcat-fieldname = 'CHECK'.
wa_fieldcat-scrtext_m = 'CHECK BOX'.
wa_fieldcat-col_pos = 8.
 wa_fieldcat-edit = 'X'.
wa_fieldcat-checkbox = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
loop at itab into wa.
 if wa-line <> 3 or 6 or 7.
 ls_stylerow-fieldname = 'CHECK' .
 ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
 "set field to disabled
 APPEND ls_stylerow TO wa-field_style.
 MODIFY itAB FROM wa.
 ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
 EXPORTING
 i_callback_program = gd_repid
 i_callback_user_command = USER_COMMAND
 is_layout_lvc = gd_layout " Use this Parameter
 it_fieldcat_lvc = it_fieldcat
 i_save = 'X'
 TABLES
 t_outtab = ITAB
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
REGARDS
MURTHY.

Similar Messages

CHECK BOX IN DROP DOWN LIST

HI PLS TELL ME HOW TO INSERT CHECK BOX IN DROP DOWN LIST.
NITIN

Hi,
You can select only one value from dropdown list.Checkboxes are to select more than one.Why do you need checkbox in drop down??
Thanks,
Keerthi

Interactive boxes (e.g. google maps text box) and drop-downs from those boxes go blank white.

So for certain websites//boxes when I open them they are just blank white, or toolbars on websites will also randomly go between visible and completely white randomly as I scroll. So for example the facebook toolbar randomly goes white, when I try to check my messages//notifications it goes white, the google maps text box and all the drop downs are completely white, etc.

You can try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
You need close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

ABAP WebDynPro tutorials for Roadmaps and drop-down list box

Hi Experts,
I need some tutorials on Roadmaps and drop-down list box in ABAP WebDynPro which will show me step by step process how to create application using this. 'help.sdn' pages do show the procedures for implementing those ui elements.
And also the previous threads refer to some expired documents.
Thanks in advance.....
Plz help....
Edited by: Akashdeep Basu on Aug 9, 2008 9:30 AM

Hi
[SAP BLOG on ABAP-WEBDYNPRO|https://www.sdn.sap.com/irj/sdn/nw-development?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9]
[Step-By-Step Approach|http://help.sap.com/saphelp_nw04s/helpdata/en/79/002c2a0d43e645a39a89dd662b5f68/content.htm]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
Regards
Pavan

How does one come to know this..drop down in ALV in WD

Hello Friends,
 I had a requirement of adding a drop down in ALV, i eventually got it but I have some questions about it
I used the following code and got the drop down
lr_column = lr_column_settings->get_column( 'BWART' ).
CREATE OBJECT lr_input_field
 EXPORTING
 value_fieldname = 'BWART'.
lr_column->set_cell_editor( lr_input_field ).
DATA : LR_DROPDOWN TYPE REF TO CL_SALV_WD_UIE_DROPDOWN_BY_KEY.
CREATE OBJECT LR_DROPDOWN EXPORTING SELECTED_KEY_FIELDNAME = 'BWART'.
LR_COLUMN->SET_CELL_EDITOR( LR_DROPDOWN ).
DATA: LT_VALUESET TYPE TABLE OF WDR_CONTEXT_ATTR_VALUE,
LS_VALUESET TYPE WDR_CONTEXT_ATTR_VALUE,
LR_NODE TYPE REF TO IF_WD_CONTEXT_NODE,
LR_NODEINFO TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
LR_NODE = WD_CONTEXT->GET_CHILD_NODE( 'RETURN_NODE' ).
LR_NODEINFO = LR_NODE->GET_NODE_INFO( ).
LS_VALUESET-VALUE = '973'.
LS_VALUESET-TEXT = '973'.
APPEND LS_VALUESET TO LT_VALUESET.
LS_VALUESET-VALUE = '222'.
LS_VALUESET-TEXT = '222'.
APPEND LS_VALUESET TO LT_VALUESET.
LR_NODEINFO->SET_ATTRIBUTE_VALUE_SET( EXPORTING NAME = 'BWART' VALUE_SET = LT_VALUESET ).
My question is ... how does 1 know which class to use? how to use that class... most of concepts about OOPS are clear.. but i still cant figure out how does 1 find out which class to use.. is it all by expericence..

In short: Yes, by experience. Then again, for WD4A there is a class for each UI-Element available. Once you know this, you can easily search se24 for CLWD<UI-NAME>* or the like.

MULTIPLE-ROW drag and drop between 2 ALV grids

Hi,
Can anybody help me with acheiving MULTIPLE-ROW drag and drop functionality between 2 ALV grids.

hi Prakash,
Actually I'm trying to develop multiple drag and drop between 2 ALV's. To understand the events properly, I started working on this sample program where it uses 1 ALV and splits it into 2 and uses single row drag and drop between them. Now I'm making it to work for multiple drag and drop, so that I can use it on my application. This is the code which I'm working on..
*& Report Z_ALV_GRID_CONTROLS_DRAG_DROP                               *
REPORT z_alv_grid_controls_drag_drop.
DATA   : i_ztransactions TYPE TABLE OF ztransactions
                               WITH HEADER LINE.
DATA   : i_ztransactions2 TYPE TABLE OF ztransactions
                               WITH HEADER LINE.
DATA   : ok_code LIKE sy-ucomm .
DATA : mcontainer TYPE REF TO cl_gui_custom_container .
DATA : mcontleft TYPE REF TO cl_gui_container .
DATA : mcontright TYPE REF TO cl_gui_container .
DATA : msplitcont TYPE REF TO
                        cl_gui_easy_splitter_container .
DATA : malv_left TYPE REF TO cl_gui_alv_grid .
DATA : malv_right TYPE REF TO cl_gui_alv_grid .
DATA : mrow TYPE lvc_s_row .
DATA : gt_outtab_source TYPE ztransactions.
DATA : gt_outtab_target TYPE ztransactions.
DATA : g_repid LIKE sy-repid.
DATA:   gs_layout TYPE lvc_s_layo ,
        g_behaviour_alv TYPE REF TO cl_dragdrop .
DATA : mlines TYPE i .
      CLASS lcl_dragdropobj DEFINITION
This is the Class of Drag Drop Object .
This Object is used as a temporary storage means
of the information extracted with drag
CLASS lcl_dragdropobj DEFINITION.
PUBLIC SECTION.
    DATA: i_ztransactions TYPE ztransactions ,
          index TYPE i ,
          original_table(5) TYPE c ,
          proceed_trans(1) TYPE c .
ENDCLASS.                    "lcl_dragdropobj DEFINITION
DATA : mdata TYPE REF TO lcl_dragdropobj .
      CLASS DND_TOOLS DEFINITION
This class contains the methods responding to the
events ONDRAG , ONDROP , ONDROPCOMPLETE
of the ALV Grid Controls
CLASS dnd_tools DEFINITION .
PUBLIC SECTION .
   METHODS:handle_user_command
                           FOR EVENT user_command OF
                           cl_gui_alv_grid
                           IMPORTING
                           e_ucomm.
    METHODS : handle_drag_from_left
                         FOR EVENT ondrag OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_dropcomplete_from_left
                          FOR EVENT ondropcomplete OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_drag_from_right
                          FOR EVENT ondrag OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_dropcomplete_from_right
                          FOR EVENT ondropcomplete OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_row
                          e_dragdropobj .
    METHODS : handle_drop_to_left
                          FOR EVENT ondrop OF
                          cl_gui_alv_grid
                          IMPORTING
                           e_dragdropobj .
    METHODS : handle_drop_to_right
                          FOR EVENT ondrop OF
                          cl_gui_alv_grid
                          IMPORTING
                          e_dragdropobj .
ENDCLASS .                    "DND_TOOLS DEFINITION
      CLASS DND_TOOLS IMPLEMENTATION
CLASS dnd_tools IMPLEMENTATION .
METHOD handle_drag_from_left .
METHOD handle_user_command.
   DATA: lt_rows TYPE lvc_t_row.
    DATA: lt_rows TYPE lvc_t_roid.
    DATA: lt_row TYPE lvc_s_roid.
    DATA: mdata TYPE REF TO lcl_dragdropobj .
    DATA: dragdropobj TYPE REF TO lcl_dragdropobj .
get selected row
    CALL METHOD malv_left->get_selected_rows
      IMPORTING
        et_row_no = lt_rows.
    CALL METHOD cl_gui_cfw=>flush.
    IF sy-subrc NE 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = g_repid
          txt2 = sy-subrc
          txt1 = 'Error in Flush'(500).
    ENDIF.
    CREATE OBJECT mdata.
    LOOP AT lt_rows INTO lt_row.
     mrow = lt_row .
      READ TABLE i_ztransactions INDEX lt_row-row_id INTO
                 i_ztransactions.
      MOVE i_ztransactions TO mdata->i_ztransactions .
      MOVE lt_row-row_id TO mdata->index.
      MOVE 'LEFT' TO mdata->original_table .
      e_dragdropobj->object = mdata .
    ENDLOOP.
ENDMETHOD.                           "handle_user_command
METHOD handle_dropcomplete_from_left .
NB : the following data object MDATA is local to
the method and contains the information from the
import parameter of the method E_DRAGDROPOBJ
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    DATA: lt_rows TYPE lvc_t_roid.
    DATA: lt_row TYPE lvc_s_roid.
    CALL METHOD malv_left->get_selected_rows
      IMPORTING
        et_row_no = lt_rows.
    CALL METHOD cl_gui_cfw=>flush.
    IF sy-subrc NE 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = g_repid
          txt2 = sy-subrc
          txt1 = 'Error in Flush'(500).
    ENDIF.
    LOOP AT lt_rows INTO lt_row.
      mdata ?= e_dragdropobj->object .
      CHECK mdata->proceed_trans = 'X' .
      mrow = mdata->index.
      DELETE i_ztransactions INDEX mrow .
      APPEND mdata->i_ztransactions TO i_ztransactions2 .
      SORT i_ztransactions2 BY kunnr belnr .
      DELETE i_ztransactions2 WHERE kunnr IS INITIAL .
      DESCRIBE TABLE i_ztransactions LINES mlines .
      IF mlines EQ 0 .
        CLEAR i_ztransactions .
        APPEND i_ztransactions TO i_ztransactions .
      ENDIF .
    ENDLOOP.
    CALL METHOD malv_left->refresh_table_display.
    CALL METHOD malv_right->refresh_table_display.
ENDMETHOD .                    "HANDLE_DROPCOMPLETE_FROM_LEFT
METHOD handle_drag_from_right.
    mrow = e_row-index .
    READ TABLE i_ztransactions2 INDEX mrow INTO
               i_ztransactions2 .
    CREATE OBJECT mdata .
    MOVE i_ztransactions2 TO mdata->i_ztransactions .
    MOVE mrow TO mdata->index .
    MOVE 'RIGHT' TO mdata->original_table .
    e_dragdropobj->object = mdata .
ENDMETHOD .                    "HANDLE_DRAG_FROM_RIGHT
METHOD handle_dropcomplete_from_right .
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    mdata ?= e_dragdropobj->object .
    CHECK mdata->proceed_trans = 'X' .
    mrow = mdata->index .
    DELETE i_ztransactions2 INDEX mrow .
    APPEND mdata->i_ztransactions TO i_ztransactions .
    SORT i_ztransactions BY kunnr belnr .
    DELETE i_ztransactions WHERE kunnr IS INITIAL .
    DESCRIBE TABLE i_ztransactions2 LINES mlines .
    IF mlines EQ 0 .
      CLEAR i_ztransactions2 .
      APPEND i_ztransactions2 TO i_ztransactions2 .
    ENDIF .
    CALL METHOD malv_left->refresh_table_display.
    CALL METHOD malv_right->refresh_table_display.
ENDMETHOD .                    "HANDLE_DROPCOMPLETE_FROM_RIGHT
METHOD handle_drop_to_left .
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    mdata ?= e_dragdropobj->object .
    IF mdata->original_table = 'RIGHT' .
      mdata->proceed_trans = 'X' .
    ELSE .
      mdata->proceed_trans = ' ' .
    ENDIF .
    e_dragdropobj->object = mdata .
ENDMETHOD .                    "HANDLE_DROP_TO_LEFT
METHOD handle_drop_to_right .
    DATA : mdata TYPE REF TO lcl_dragdropobj .
    DATA: lt_rows TYPE lvc_t_roid.
    DATA: lt_row TYPE lvc_s_roid.
    CALL METHOD malv_left->get_selected_rows
      IMPORTING
        et_row_no = lt_rows.
    CALL METHOD cl_gui_cfw=>flush.
    IF sy-subrc NE 0.
add your handling, for example
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = g_repid
          txt2 = sy-subrc
          txt1 = 'Error in Flush'(500).
    ENDIF.
    LOOP AT lt_rows INTO lt_row.
      mdata ?= e_dragdropobj->object .
      IF mdata->original_table = 'LEFT' .
        mdata->proceed_trans = 'X' .
      ELSE .
        mdata->proceed_trans = ' ' .
      ENDIF .
      e_dragdropobj->object = mdata .
    ENDLOOP.
ENDMETHOD .                    "HANDLE_DROP_TO_RIGHT
ENDCLASS .                    "DND_TOOLS IMPLEMENTATION
DATA : mlistener TYPE REF TO dnd_tools .
======================================================
START OF SELECTION
======================================================
START-OF-SELECTION .
PERFORM get_data .
CALL SCREEN 100 .
The screen 100 has the custom control MCONTAINER and
on the flow logic has the following modules :
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
MODULE PREPARE_SCREEN .
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
(Off course not commented out in the real flow logic)
      FORM GET_DATA                                 *
FOR THIS EXAMPLE THE DATA SELECTION IS HARD CODED
FORM get_data .
CLEAR : i_ztransactions , i_ztransactions[] .
i_ztransactions-mandt = sy-mandt .
i_ztransactions-waers = 'EUR ' .
i_ztransactions-kunnr = '0000000001' .
i_ztransactions-belnr = '0000000001' .
i_ztransactions-bldat = '20030101' .
i_ztransactions-dmbtr = '1000' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000002' .
i_ztransactions-bldat = '20030202' .
i_ztransactions-dmbtr = '1010' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000003' .
i_ztransactions-bldat = '20030323' .
i_ztransactions-dmbtr = '1020' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000004' .
i_ztransactions-bldat = '20030404' .
i_ztransactions-dmbtr = '1030' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000005' .
i_ztransactions-bldat = '20030505' .
i_ztransactions-dmbtr = '1040' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000006' .
i_ztransactions-bldat = '20030606' .
i_ztransactions-dmbtr = '1050' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000007' .
i_ztransactions-bldat = '20030707' .
i_ztransactions-dmbtr = '1060' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000008' .
i_ztransactions-bldat = '20030808' .
i_ztransactions-dmbtr = '1070' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000009' .
i_ztransactions-bldat = '20030909' .
i_ztransactions-dmbtr = '1080' .
APPEND i_ztransactions .
i_ztransactions-belnr = '0000000010' .
i_ztransactions-bldat = '20031010' .
i_ztransactions-dmbtr = '1090' .
APPEND i_ztransactions .
CLEAR : i_ztransactions2 , i_ztransactions2[] .
APPEND i_ztransactions2 .
ENDFORM .                    "GET_DATA
*&      Module STATUS_0100 OUTPUT
The PF STATUS STATUS100 called from the module below,
has on the Standard toolbar the buttons
BACK , EXIT and CANCEL .
These buttons are provided with function code = 'EXIT'
MODULE status_0100 OUTPUT.
SET TITLEBAR 'TITLEDRAGDROP' .
SET PF-STATUS 'STATUS100'.
ENDMODULE.                 " STATUS_0100 OUTPUT
     Module USER_COMMAND_0100 INPUT
The following module checks the User Command and ends
the program
MODULE user_command_0100 INPUT.
IF ok_code = 'EXIT' .
    CLEAR : mcontainer ,
           mcontleft ,
           mcontright ,
           msplitcont ,
           malv_left ,
           malv_right .
    LEAVE TO SCREEN 0 .
ENDIF .
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module PREPARE_SCREEN OUTPUT
MODULE prepare_screen OUTPUT.
IF mcontainer IS INITIAL .
    CREATE OBJECT mcontainer
                  EXPORTING
                  container_name = 'MCONTAINER' .
    CREATE OBJECT msplitcont
                  EXPORTING
                  parent = mcontainer
                  orientation = 1 .
    mcontleft = msplitcont->top_left_container .
    mcontright = msplitcont->bottom_right_container .
    CREATE OBJECT malv_left
                  EXPORTING i_parent = mcontleft .
    gs_layout-sel_mode = 'D'.
    CREATE OBJECT malv_right
                  EXPORTING i_parent = mcontright .
    gs_layout-sel_mode = 'D'.
    PERFORM set_layout_capable_of_drag_dro
                  USING 'X' 'X' .
    CALL METHOD malv_left->set_table_for_first_display
      EXPORTING
        i_structure_name = 'ZTRANSACTIONS'
        is_layout        = gs_layout
      CHANGING
        it_outtab        = i_ztransactions[].
    CALL METHOD malv_right->set_table_for_first_display
      EXPORTING
        i_structure_name = 'ZTRANSACTIONS'
        is_layout        = gs_layout
      CHANGING
        it_outtab        = i_ztransactions2[].
    CREATE OBJECT mlistener .
    CALL METHOD malv_left->set_toolbar_interactive.
    SET HANDLER mlistener->handle_drag_from_left
                FOR malv_left .
    SET HANDLER mlistener->handle_dropcomplete_from_left
                FOR malv_left .
    SET HANDLER mlistener->handle_drag_from_right
                FOR malv_right.
    SET HANDLER mlistener->handle_dropcomplete_from_right
                  FOR malv_right .
    SET HANDLER mlistener->handle_drop_to_right
                 FOR malv_right .
    SET HANDLER mlistener->handle_drop_to_left
                 FOR malv_left .
ENDIF .
ENDMODULE.                 " PREPARE_SCREEN OUTPUT
      Form SET_LAYOUT_CAPABLE_OF_DRAG_DRO
Definition of a Drag & Drop behaviour for the ALV
grid
FORM set_layout_capable_of_drag_dro USING drag drop.
DATA : effect TYPE i ,
         handle_alv TYPE i .
CREATE OBJECT g_behaviour_alv.
effect = cl_dragdrop=>move + cl_dragdrop=>copy .
CALL METHOD g_behaviour_alv->add
    EXPORTING
      flavor     = 'Line'
      dragsrc    = drag
      droptarget = drop
      effect     = effect.
CALL METHOD g_behaviour_alv->get_handle
    IMPORTING
      handle = handle_alv.
gs_layout-s_dragdrop-row_ddid = handle_alv.
ENDFORM.              " SET_LAYOUT_CAPABLE_OF_DRAG_DRO

Font in Menu Bar and Drop Down list way too small

I just tried PSE 10 and was very surprised to see that Adobe did not address the problem with the font size being way too small in the menu bar and drop down list. I cannot possibly read the font - so the program is basically unusable. I am using a new 17inch laptop. Is it possible that after all the complaints Adobe didn't fix this problem in PSE 10? Are they even working on it? I love the program but unfortunately I am going to have to switch to something else because there is no way I can read the font and thus cannot use the program at all. Very, very disappointing. Hopefully they are working on a fix???

Photoshop CS5 Essential has preferences that offer users the opportunity to adjust menu bar background color as well as font size. For example,
"UI Font Size
If you find that Photoshop's interface text is a little too small for comfort, you can increase its size by changing the UI Font Size option to either Medium or Large. And no, this option isn't just for old folks with poor eye sight. Working on a very high resolution monitor can make Photoshop's interface text appear very small. Personally, I like to set my font size to Large which I find helps to avoid eye strain. You'll need to close and then re-open Photoshop for the change to take effect:
Change the font size to increase some of the text in Photoshop's interface.
(From an article by Steve Patterson at http://www.photoshopessentials.com/basics/cs5/preferences/ .
Why not Photoshop Elements? ?
Lensw

Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

Gallery with Paypal buttons and drop-downs on the index page?

I'm looking for a LR gallery where I can have thumbnails with Paypal buttons and drop-downs on the index page.
I would prefer to keep my galleries interface streamlined and don't want to clutter it up with dropdowns and cart. I would like to have 1 page for ordering that has all my images as thumbnails with drop downs for price and size, rather than right-clicking on and image which opens in another page like the LRG Gallery with Paypal.
I don't have a lot of experience messing with code, and none with .js. I did make a drop down in Paypal and have the code, but I think things would be pretty unwield it I designed a page as a table like I would in MS Word.
I'm familiar with LRG Complete gallery, but don't see that it has the ability to not require a right click to order.
I don't have a lot of experience messing with code, and none with .js. I did make a drop down in Paypal and have the code, but I think things would be pretty unwield it I designed a page as a table like I would in MS Word.
Any thoughts, ideas, or help?
Thanks,
Reid

Maybe some could try this out, and has experienced the same problem.
It is on the site http://www.fonetix.biz
and then push the German flag in the top Right corner, and further click on the Button "Contact info". It will give the eroor.

How to put Check Boxes and Radio button in Smartforms

Hi all,
How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use.
regards,
Mohsin

u can declare the checkboxes or radiobuttons whatever in driver program and pass the same to ur form...

How to create the Check box and Text Area inside the Assignment block

Dear all,
        I am new to web UI development. my requirement is to create the Check box and Text box in the Assignment block. Can anyone help me to do this requirement.
Thanks & Regards,
Ashok.

Hi,
Please place the below code in the GET_P methods of the fields.
For Text Area
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_textarea.
ENDCASE.
For Check Box
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_checkbox.
ENDCASE.
Regards,
Lakshmi.Y

CS6 Bridge suddenly no longer opens jpeg images. Double click and drop-down menu do nothing. No new installation or changes.

CS6 Bridge suddenly no longer opens jpeg images. Double click and drop-down menu do nothing. No new installation or changes. Any ideas?

Consider resetting Bridge Preferences.
Close Bridge
Cmd+Opt+Shift held down, Open Bridge.
Choose Reset Preferences

Livecycle: Can you click a check box and have it copy the entire field to a new location?

I have a check box and I want to check the box and have field 1a, field 1b, field 1c be copied to location on a third page.
These are patient goals: and those goals need to be recognized later on while trying to fill out paperwork, but I don't want to have to look back at the front page. so I want to pick which goals I want to see at a later page and have the goal (field) and the field content that was chosen on the first page show up.
I will choose three to five goals and I want them lined up
field 1a, field 1b, field 1c then underneath
field 2a, field 2b, field 2 c etc.
THanks for the help
CHeers

The attachment functionality in this forum keeps fluctuating ....if you do not see an add attachmnet button on your post then email it me instead at [email protected]
Paul

Can anyone tell me how to increase the text size in my menu bar and drop down menus?

Just bought a new 27" screen iMac. The menu bar and drop down menu text is much to small for me to see without leaning close to the screen. Does anyone know how to customize the text to a larger size. This is an issue for any program I open.

Once upon a time Apple displays packed in 72 dots to an inch (making their resolution 72 DPI). That meant that what we saw on screen at 100% scale was exactly what was printed on a printer - not to mention quite comfortable to read. However that advantage was eclipsed by the fact that photopgraphs and video were pixelated and the only solution to that was to increase the resolution - to pack in more dots per inch - which has the side effect of shrinking the size of text. Where I once used Word at 100% scale I now find it most comfortable at 150% scale.
There are several solutions. One, as Lex gave you, was to reduce the resolution of the LCD display. But unlike CRT displays, an LCD is tuned to a specific resolution and when you change it the results tend to be blurry. Another is to keep the resolution as it is and to adjust each program (if the program allows it). This makes Word usable and your browser can be set to use no font smaller than a size you set (which has some unpleasant side affects at some Web sites), but some programs and some parts of programs cannot be changed. The menubar and menus are among them. The third solution is one that Apple promised several years ago but has not yet provided - a resolution independant GUI. We can only hope that comes soon. And there's another partial solution - look in System Preferences under Accessibility.

Why are my slide shows disappearing and drop down menus not working?

I have a huge problem with clients currently waiting on a response from us.
We have created a website with MUSE, we have implemented slideshows and drop down menus which work fine when you preview them.
HOWEVER, once we put an editor in place for the client to then input their content onto the website, all of the slideshows disappear and the drop down menus no longer work!?
What do I do to rectify this problem??
Thanks Guys

This actually did work... But, I have figured out that the issue is really in IE7... and for whatever reason the code was making IE8 go into compatability mode (essentially using IE7).

Check box and Drop down in ALV

Similar Messages

Maybe you are looking for