Check box column trouble

Hi !
I am new with java server faces.
What i am trying to do now is adding a check box column to a rich extended data table, i did this adding a new column with a h:selectBooleanCheckbox inside of it.
The trouble is that i could not syncronize my check box selection with onRowClick event of table, an example could be when i deselect a table row the check box still remain selected. I am trying to solve this issue using just control components without using beans logic (i don't know if this is right).
Please if you know some tutorials explaning how to add a check box column to a extended data table or if there are some properties or events of table that could help me, give me a feed back.
Basicly what this is what i did:
<rich:extendedDataTable .... >
<rich:column width="8%" styleClass="checkBoxColumn">
<h:selectBooleanCheckbox value="true" />
</rich:column>
</rich:extendedDataTable .... >
Regards,
Radu

cezarini wrote:
The trouble is that i could not syncronize my check box selection with onRowClick event of table, an example
could be when i deselect a table row the check box still remain selected.
Basicly what this is what i did:
<rich:extendedDataTable .... >
<rich:column width="8%" styleClass="checkBoxColumn">
<h:selectBooleanCheckbox value="true" />
</rich:column>
</rich:extendedDataTable .... >
By default the value attribute of h:selectBooleanCheckbox tag is true i.e.
<h:selectBooleanCheckbox value="true" />I would suggest you use a4j:support tag. For more information about this tag please visit the following URL:
[http://livedemo.exadel.com/richfaces-demo/richfaces/support.jsf;|http://livedemo.exadel.com/richfaces-demo/richfaces/support.jsf;]

Similar Messages

What is the check box column for in iTunes?

I just upgraded to the latest version of iTunes (11 something). Now the checked songs on the Music/Song page do not sync with my iphone. I have to go to a separate page to select what I want to sync with my phone and if it's not my whole library I have to recheck everything manually. Why isn't this just what I have already checked on my Music/Song page, like in older versions? Now I have to start from scratch and the sync page isn't even by song, it's by album. I don't want to sync every song in each album as this takes up too much space on my iphone. So I don't understand what the point is of the check box column now since it's purpose seems to have been made redundant. If I uncheck the box, the song now disappears completely. It used to still be on my list but just was unchecked. Where does the song go now? And how can I get it back? If there is any sort of support documentation on these features/functions, please point me to the link as I could not find anything on the apple site.

Check marks can be used to mark out tracks that you rarely want to listen to but still want to keep in your library, e.g. a bonus interview track at the end of an album. Unchecked tracks are usually excluded from syncing to devices, skipped during track to track playback and ingored when shuffling. To easily check or uncheck all tracks hold the ctrl key down while clicking a checkbox.
tt2

Hide or Remove OCI Check Box column from Standard MDM Result Set iview

Hi,
Can we hide or remove the OCI Check box column from the Standard MDM Result set ivew?
Though i have made OCI disabled, I dont want to display the check boxes along with the product list.
Can you please help?
Thanks and best regards,
Arun prabhu S

Hi Arun,
If you are talking about the very first check box, then that is not related to OCI. Use of check box is to anable multiple item selection which can be used adding the records in the workflow, for comparison etc.
Regards,
Jitesh Talreja

Check box in matrix column bind correctly but doesn't appear check sign

Dear Sirs,
I have a check box in a matrix column (the matrix is placed i an extra folder in the item master data form).
The column is bound to a DBDataSource related to the user defined table @IIT_ITM1 as reported in the following code. The table field bound to the check box column is alphanumeric of size 1.
I use the following code:
                oCln = oMtx.Columns.Add("Per_coll", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX);
                oCln.DisplayDesc = true;
                oCln.Description = "For test";
                oCln.TitleObject.Caption = "For test";
                oCln.ValOn = "Y";
                oCln.ValOff = "N";
                oCln.Width = 60;
                oCln.DataBind.SetBound(true, "@IIT_ITM1", "U_IIT_PerColl");
                oCln.Editable = true;
The problem is: the binding to the database work (if I click on the check box and save the data, then the database content change accordingly) but I CANNOT LET THE USER SIGN APPEAR on the check box control!
Does anyone have the solution?
Thank you for help
Massimo

No response from the forum

Disable Check box in tabular form

Hi,
I am working on apex4.1. I have created a tabular form.There is 2 columns Approve and Cancel. if I tick on cancel check box then Approve check box column should disable and vice versa.
How can i do this ?
Thanks & Regards
Vedant

hi,
this thread maybe help you
Tabular Form: Enable/Disable a field based on the status of a check box
regards,

Re: creating check boxes in ALV grid using web dynpro

Hi Techies,
   I need to have a check box column in alv grid, and it should allow me to select the check box and the selected row has to be updated in the database.
Kindly assist me with the steps to handle the above mentioned scenario
Thanks in advance.

Now to first make the last column of my ALV as a checkbox:
method BUILD_ALV .
data: l_ref_cmp_usage type ref to if_wd_component_usage.
" Instantiate the ALV usage
l_ref_cmp_usage =   wd_This->wd_CpUse_My_Alv( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
endif.
" Get reference to the model
DATA: l_ref_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
l_ref_INTERFACECONTROLLER =   wd_This->wd_CpIfc_My_Alv( ).
data: lr_config type ref to Cl_Salv_Wd_Config_Table.
lr_config = l_ref_INTERFACECONTROLLER->Get_Model( ).
|" Set read only mode to false (and display edit toolbar)
lr_config->if_salv_wd_table_settings~set_read_only( abap_false ).
data: lr_table_settings type ref to if_salv_wd_table_settings.
lr_table_settings ?= lr_config.
lr_table_settings->set_read_only( abap_false ).
data: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lt_columns         TYPE        salv_wd_t_column_ref,
        lr_checkbox1        TYPE REF TO cl_salv_wd_uie_checkbox,
        lr_checkbox2        TYPE REF TO cl_salv_wd_uie_checkbox.
FIELD-SYMBOLS <fs_column> LIKE LINE OF lt_columns.
" Embed the UI elements within the ALV
lr_column_settings ?= lr_config.
lt_columns = lr_column_settings->get_columns( ).
" Embed an checkbox within the column APPROVE
LOOP AT lt_columns ASSIGNING <fs_column>.
    CASE <fs_column>-id.
      WHEN 'APPROVE'.
        CREATE OBJECT lr_checkbox1
          EXPORTING
            checked_fieldname = <fs_column>-id.
        <fs_column>-r_column->set_cell_editor( lr_checkbox1 ).
        FREE lr_checkbox1.
    ENDCASE.
ENDLOOP.
ENDMETHOD.                    "BUILD_ALV

How can I Maximize a Windows and include a check box into my jtable

Hi there,
I have made a program to show a JTABLE it is working well, I'm talking about show information(DATA), my question is related with MAXIMIZE my jframe or window, how can I do that???
other question is related with include or add a new column to my jtable, the goal here is achive include a check box column to select a recorde from my jtable..
Some advise...
here is part of my code
public static void main(String args[]) throws SQLException {
JFrame myFrame = new JFrame("Scan cut ");
Container content = myFrame.getContentPane();
content.setBackground(Color.white);
content.setLayout(new FlowLayout());
SendNotifyB = new JButton("Send Notify");
content.add(SendNotifyB);
//content.add(new JButton("Send Notify"));
//content.add(new JButton("Add O-S-T"));
SendNotifyB .addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
JOptionPane.showInputDialog("Type Odds");
JOptionPane.showInputDialog("Type Seconds");
myFrame.getContentPane().add(new AS3());
myFrame.setVisible(true);
myFrame.pack();

public class MyTableRenderer extends javax.swing.JCheckBox
implements javax.swing.table.TableCellRendererand
myTable.getColumnModel().getColumn(some value).setCellRenderer(new MyTableRenderer());I'll leave the maximizing and other code up to you as an exercise.
Message was edited by:
filestream

Checks Boxes in a Grid

Hi Experts,
I am binding my data to a grid and after that i have added a check box column as last column and i kept the Grid Collapse level as 2.My data is binded as following
COL1                COL2           COL3                     COL4
A                                                      Checkbox1
                     A1                                  Checkbox2
                                   A11                   Checkbox3
                                   A22                   Checkbox4
B                                                      Checkbox1
                    B1                                   Checkbox2
                                   B11                   Checkbox3
                                   B22                   Checkbox4
C                                                      Checkbox1
                    C1                                   Checkbox2
                                   C11                   Checkbox3
                                   C22                   Checkbox4
Now i am unable to check the Checkbox1, Checkbox2 of A and A1 , B and B1,C and C1.But i can check the other check boxes.My requirement is if i check Checkbox1 of A or B or C the respective checkboxes in that group have to be checked.
Please help me regarding this problem.
Regards.
Rajesh.

Hi Experts,
I am binding my data to a grid and after that i have added a check box column as last column and i kept the Grid Collapse level as 2.My data is binded as following
COL1                COL2           COL3                     COL4
A                                                      Checkbox1
                     A1                                  Checkbox2
                                   A11                   Checkbox3
                                   A22                   Checkbox4
B                                                      Checkbox1
                    B1                                   Checkbox2
                                   B11                   Checkbox3
                                   B22                   Checkbox4
C                                                      Checkbox1
                    C1                                   Checkbox2
                                   C11                   Checkbox3
                                   C22                   Checkbox4
Now i am unable to check the Checkbox1, Checkbox2 of A and A1 , B and B1,C and C1.But i can check the other check boxes.My requirement is if i check Checkbox1 of A or B or C the respective checkboxes in that group have to be checked.
Please help me regarding this problem.
Regards.
Rajesh.

Check box in a Grid

Hi Experts,
I am binding my data to a grid and after that i have added a check box column as last column and i kept the Grid Collapse level as 2.My data is binded as following
_COL1        COL2      COL3                      COL4_
A                                                        Checkbox1
                  A1                                    Checkbox2
                                A11                   Checkbox3
                                A22                   Checkbox4
B                                                       Checkbox1
                 B1                                    Checkbox2
                                B11                   Checkbox3
                                B22                   Checkbox4
C                                                        Checkbox1
                 C1                                    Checkbox2
                                C11                   Checkbox3
                                C22                   Checkbox4
Now i am unable to check the Checkbox1, Checkbox2 of A and A1 , B and B1,C and C1.But i can check the other check boxes.My requirement is if i check Checkbox1 of A or B or C the respective checkboxes in that group have to be checked.
Please help me regarding this problem
Regards.
Rajesh.

Please answer my question...

How to enable/disable check boxes in a table.

hi Gurus,
i am new to webdynpro for abap.
the problem i have is.
i have a table with two columns. first one is a check box column and the second one is a value field. the table is populated with data(second field only) upon pressing some button.
while populating data i want to make check box field/row ticked and disabled when second field row value is 'X' . if not leave the check box row/field enabled and unticked ( if i want i can tick the check box later). hope you guys me. this is sort of urgent. please reply with some code.
thanks in advance.
Sree

Hi
Issue what i am facing is,i want to display column of CHECKBOXes in my ALV.
for that i declare atrribute of type CHECKBOX.
And i write the following code.
lr_column_settings ?= l_value.
lt_columns = lr_column_settings->get_columns( ).
loop over table - in each loop another column can be modified
LOOP AT lt_columns INTO ls_column.
IF ls_column-id = 'CHK_BOX'.
CREATE OBJECT lr_chk_box
EXPORTING
checked_fieldname = ls_column-id.
lr_chk_box->set_read_only( ABAP_FALSE ).
lr_chk_box->set_read_only_fieldname( 'ALV_FINAL_STATUS' ).
ls_column-r_column->set_cell_editor( lr_chk_box ).
even i cant able to get checkbox in my ALV.
IT is displaying as general field.
Regards,
Ravi

Help needed regarding check box

Hi,
I have report which displays all the records and at the end it has a check box column. If i select the check box and click on the button 'GO' a mail should be sent to those check box selected.
Please can any one help me in this.
Thanks,

user12174050 wrote:
Here the mail is going but if i select more than one check box then mail is not going to the second one selected.Presumably because your call to apex_mail.send is taking place outside of the loop, so it should only send one mail.
And by the way, looking at your process, you have the call: P17_BASE_LOGIN := v_base_login; -if you select multiple chckboxes, :P17_BASE_LOGIN is going to get changed each time, is that your expected behaviour?
Also, don't forget to surround your code with: tags
Ta,
Trent

Numbers: Check Boxes returning 0 (zero) value

In Numbers I would like to add a check box column next to a column of numbers. If the box is checked I would like it to convert the specifc number in the agacent column to a value of 0 (zero). If the box is left unchecked the value will stay as written. Is there a function that can be written to accomodate this?

Hi neofyte,
Wayne's demonstration has a feature that my demonstration lacks. Wayne has correctly avoided Column A, because in some Templates Column A is a Header Column. Header Columns are best used as identifiers (for example, Name or Customer Number).
If your Table has Column A as a Header Column (often a coloured fill), the solution would look somethig like this:
Formula in Cell D2 is
=IF(C,0,B2)
Regards,
Ian.

Urgent Help Required for Check Box in Table Column

Hi all,
Could any body help me to solve my problem?
First of all I have created a table whose one column is check box. The column of the tables are Name,Phone,ID,Address and a checkBox columns.In one view
the table will be found with data. I want to click on some of the rows(suppose there are 5 rows, but based on some condition I have selected the check box of 3 rows).
Next there will be a button(Supose SEND Button).
After selecting the check box I want to press that button and then a new window will come which will show two tables. one for selected rows(with the same columns name except check box) and another for Unchecked rows with the same column name(Name,Phone,ID,Address).
Could any body help me by sending the details and code?
Thanks and Regards.
Sudip

Hi Sudip,
1) create custom controller and appropriate context structure there (dataNode(Name,Phone,ID,Address,Check))
2) create view StartView. Map data node from custom controller to node in view. Create table and bind context node attributes to appropriate table columns.
3) create view ResultView. Map data node from custom controller to node in view. Create 2 nodes (CheckedData, UncheckedData) with supply methods. Create filtering implementation in supply methods (add checked and unchecked node elements to appropriate nodes).
4) create new window with resultView as default view
4) in startView in button action handler put something like
     IWDWindowInfo _windowInfo = wdComponentAPI.getComponentInfo().findInWindows("Popup");
     IWDWindowManager manager = wdComponentAPI.getWindowManager();
     IWDWindow _window = manager.createWindow(_windowInfo, true);
     _window.open();
So, just tried localy and it works.
Best regards, Maksim Rashchynski.

BSP: How to create check box in a column of a Table View

Hi All,
I have a table view in Web IC scenario. my requirement is to display check box in one of the column of the table view.. so that i can select multiple lines from the table and do some calculations!.
Anybody have any hint/clue
Thanks in advance,
sudeep v d.

Hi,
This can be achieved by using a Table iterator.
Please check the standard examples for this.
Thanks,
Rashmi.

Check box als column in a standard table, how to get the selected row

Dear experts,
I habe standard tablt with check box as column. Now I want to get the current selected row structure and do some changes. How could I solve this problem? till now I just know to get the structure via lead selection.
lo_node->get_element().
lo_element = lo_node->get_static_attributes ( static_attributes = ls_row).
How could I get the element through check-box in stead of lead selection. Many thanks!

check this code
To get the selected row number
data: lr_element type ref to if_wd_context_element,
lv_index type i.
lr_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
lv_index = lr_element->get_index( ).
Thanks
Bala Duvvuri

Check box column trouble

Similar Messages

Maybe you are looking for