Check boxes gone

Hi,
I've made a Application but I've a strange thing.
When I select al columns to be shown in the program (and I run the program) I can select a record and modify it, thts perfect!
BUT...
When I deactivate some columns (Application->Page defenition->Regions->Reports and deactivate some columns). When I run the program I cant modify the records anymore... Anyone an idea?
regards,
Richard

Richard,
I have a few points with regards to your post that might make it a bit easier to help you:
Is this a tabular form, if so, have you created it manually, or using the wizard? Your subject is regarding Check Boxes, but you have not mentioned them again in your post.
Is it a process that is not firing, or your application that is erroring when trying to show this report and finally when you say you "deactivate" columns, are you setting the "Show" checkbox to unchecked, or are you setting them to be displayed conditionally?
Cj

Similar Messages

Dropbox and box sync check boxes gone?

Hello,
Earlier today I went through a deleting spree to try to get rid of all WD "drive stuff" on my computer becuase Mavericks apparently has problems with this stuff and my TimeMachine backup disk sponaneosly erased itself last night.
Now, the "folder check boxes" for my dropbox folders have dissapeared so I can't tell whether or not a folder has been succesfully synced? The same has happened to my "box sync" cloud folders... I reinstalled box sync and restarted but it didn't change anything.
anyone have any idea what I can do to get these checkboxes back ?? Otherwise it is very difficult to know for sure if my files are syncing to the cloud...
Thanks!!!

I believe the issue is that the Dropbox folder and subordinate folders (and files) have os/x extended attributes set to not allow others to read the file (which means spotlight indexing cannot read it to index it).
So here's what I see but I do not know how to set the correct xattr to allow spotlight to do the indexing:
ls -l
drwx------@ 24 <suppressed> staff 816 Dec 28 15:47 Dropbox
and the settings are:
xattr -l Dropbox
com.apple.FinderInfo:
00000000 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 |................|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
Any wizards out there who know how to set the xattr to allow g+r and o+r in normal unix parlance.
Thanks,

How to read the check box value in alv report

hi experts,
i m working on one alv report where i m using the check box for field selection in alv display.
but i don't know how to read the only selected fields.
wa_fieldcat-fieldname = 'BOX'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Box'.
wa_fieldcat-checkbox = 'X'.
wa_fieldcat-input = 'X'.
wa_fieldcat-edit = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AUFNR'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Sales Doc'.
wa_fieldcat-hotspot = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = v_repid
     I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     it_fieldcat                       = i_fieldcat[]
     i_save                            = 'A'
     it_events                         = v_events
    TABLES
      t_outtab                          = it_header
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
when '&RELEAS'.
endcase
endform.
i gone through some already posted que for same problem i tried options like
loop at it_header.
endloop.
but i m getting box field empty.
is there i missed something? plz sugeest.. if u have any other solution plz post...

Have this code in your user command fm:
* For capturing changed data
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = w_grid.
CALL METHOD w_grid->check_changed_data
    IMPORTING
      e_valid = w_valid.
IF w_valid = 'X'.
loop at itab where mark = 'X'.
endloop.
ENDIF.
Regards,
Ravi

Pdf's display check boxes wrong

I was able to post this question as it was not asked before. This is incorrect. A thread on this was closed on 2/28/2013 see here...
https://support.mozilla.org/en-US/questions/951196
I am presently using FireFox V 23.0.1
When opening up a PDF with preselected check boxes, instead of a check box the #4 is placed in the box (I know totally random). The previous link has screen shots that represent the problem.
The previous thread, it was closed with a vague declaration that the problem was A) fixed or B) being addressed. This problem should now be considered pervasive as 4 verions have gone by with no correction.
Further PDF documents seem to have all sorts of bugs in them not the least of which is that editable fields for forms are un-editable when viewed in FireFox. If the Adobe API for working with PDF's is lacking, no worries. Please just declare this and state bug fixes for PDF's are low priority due to their hair-pulling, eye gouging, frustrations. I/We will not like the answer but will understand (I code too).
Any thoughts on the cause of this? It ain't cookies or browser cache.
Thank you for your attention on this matter...and your general awesome-es-ness.

The built-in PDF viewer still lacks many features of the Adobe plugin.
A slightly updated version (compared with Firefox 24) is available on the Add-ons site here: https://addons.mozilla.org/en-US/firefox/addon/pdfjs/
A development version that contains the latest changes is available from this page (scroll down to Browser Extensions): https://github.com/mozilla/pdf.js
I haven't tested those to see whether they change the problems you're encountering.
One of the complexities of researching issues with the Javascript-based PDF viewer is that problems are tracked both on the github site and in the traditional bug tracking system...

"GR Non-Valuated" check box in Goods Recipt tab

How "GR Non-Valuated" check box in Goods Recipt tab of production order gets activated.
I have a ticket wherein the customer does not want this check mark to be checked but it is checked automatically
Please help understand the logic behind it and advice to stop this from happenning.
Thanks,
Ganesh

Dear,
Production order settlement in case of sales order is derived based on the sales order account assignment defination, In this case it appears they have gone for Non-Valuated Sales order stock. Are you using the Make to Order production with Strategy 20 or 25 then it comes under the non-valuated customer order stock.
Please refer this link,
GR done as Non Valuated Goods Receipt
Regards,
R.Brahmankar

** Create New Transaction Check Box in BPM

Hi Friends,
I have ticked the check box 'Create New Transaction' for every step in BPM. In Block I have mentioned 'Block Start' & 'Block End' property as 'New Transaction'.
I have gone through SAP Help Transactional Behaviour of BPM. Somewhere it is mentioned by check this to increase system performance, database hit time will be reduced. Somewhere 'No New Transaction' is recommened.
I am confusing on this.
Could you kindly help me to understand this clearly ? (Like, what is the advantage of 'Create new Transaction'?, If untick what will happen ? ...)
Kind regards,
Jegathees P.

it depends on how you decide to use the property.
in help it mentions;
Transactional Behavior for Specific Step Types
At runtime, the system normally creates a separate transaction for each step. The transaction then covers this step only. However, you can influence the transactional behavior of particular step types. In the step properties, you can define that the system is not to start a new transaction when the step is executed. The system then executes the step in the transaction that was started at the time of execution. Consequently, no background work item is created for the step and the database does not need to be accessed. In this way you can improve system performance.
by defining to not use a new transaction at the right place you can improve performance.
It also depends on step types. For example in case of a sync send this is what help says;
No New Transaction: You can expect better system performance if the system does not create a new transaction for the send step. However, only select this setting if by repeating the send step the result is not changed (idempotency). This is the case, for example, with lookup operations.
Note
If you have selected this setting and an error occurs, synchronous sending can also cause problems in the pipeline and the receiver system following the rollback. Messages with an error status can also remain in the pipeline.
New Transaction: If the result is changed when the step is repeated, choose Create New Transaction. Otherwise the following error situation can occur: The system successfully executes a synchronous send step but an error occurs in the subsequent step. The system rolls back processing and executes all steps in the transaction - including the send step - again. If the send step results in a write-to operation in the receiver system, for example, creating a purchase order, this is also repeated. This can result in semantic errors.
Mainly transaction processing helps to have a roll back implemented.

Interactive fields and check boxes don't stay in tab order

Hi everyone. I'm creating a census form for my parish which contains questions and check boxes. I've laid out the first section of this form (called Household Member 1), then gone back and added all the text fields / check boxes in the order in which I want the user to be able to tab through the form. When I open the Tab Order dialogue box to make sure the user will be able to tab through the form correctly, all the fields / check boxes are in the correct order. Now I need the exact same sections repeated... Household Member 2, Household Member 3, etc. In total, there will be 7 sections on the form that request the exact same information. So after I get the first section the way I want it, I copy and paste, or drag and duplicate the section with all it's fields onto the next page. However, when I check the Tab Order on this subsequent sections, all of my check boxes have moved to the end of the list, requiring me to have to manually move each check box back into its correct position in the section. This happens every time I duplicate the section... I have to manually put the tabs in their correct order. I tried duplicating the entire page rather than just duplicating the section, and the same thing happens. These fixes are tedious to say the least. Any thoughts about how to fix this would be appreciated.
I'm using CS6 on a Mac with OS 10.8.3

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How to get the "delete" check box back?

Hi Guys,
I just used the "Migrate to Interactive Report" feature. After doing so, the check box is gone that is used to indicate rows to delete. A copy of the region is marked as "disabled" and the check box is still there, but it's not in the newly created region. Without that check box, my page has no way to delete rows. How do I add the check box to the new Interactive Report region? I'd rather not re-create the page from scratch.
Thanks,
Kim
P.S. I'm using Apex 4.1 and Oracle 11g xe - all running on Windows 7.

How about something like this? Instead of a check box add a new column with a delete image, you can use something like delete.gif (#IMAGE_PREFIX#delete.gif). The downside is that will be deleting one at a time, but in my experience this may not be an issue.
Add a hidden item to hold the ID of the row your want to delete. We'll call it P1_ID.
The new column with the delete image will need to "branch" to a URL and use this code (ALL in one single line)
apex.confirm("Are you sure you want to delete?", {
request:"DELETE_ROW",
set:{"P1_ID":#ID#}
});Then add a page process that fires when the request is DELETE_ROW
Would probably look something like this:
delete from some_table where id = :P1_ID;
A similar technique can be used for checkboxes, but it's a little more advanced as you need to loop through the selections.
Oh and add the column to the IR you don't really need to select anything. Or better yet, you could re-use the ID column of the report if you have one as your delete column. The #ID# on the code above needs to be the name of your column. So if your column is EMPNO the above would be #EMPNO# instead of #ID#.
Hope this helps.
-Jorge

Check Box in SAP Business Partner

Hello Everybody,
I'm working with BUPT and trying to place a check box in SAP Business Partner (Role: MKK).
Actually the Check box is delivered from SAP standard (Function Group: FSBP_05 and screen 0201) and I'm trying to custom it under Partnerdaten "BUP310". I have gone through the standard customizing procedure. Still the Check box field is not visible on the screen.
Can anybody please provide me a tip or any kind of Doku.
Thanks and Regards
Ravi

Hi Ravi, check this.
See these related SAP OSS Notes.
Note 675800 - Business partner enhancement SRM on maintenance screen
Other Related Notes
937838 - Customer fields on BBPMAININT: Dump on Vendor Data tab
821235 - Customer enhancement for maintaining BP causes errors
672960 - User-defined fields 2
494966 - Composite SAP Note for Easy Enhancement Workbench (EEW)
484597 - Customer enhancement of CRM applications
937838 Customer fields on BBPMAININT: Dump on Vendor Data tab
853818 DLA: Error messages in BBPMAININT not displayed
847618 DLA: IBU data not displayed 14.10.2005
821235 Customer enhancement for maintaining BP causes errors
cheers,
Hema.

Keeping or Saving a check box in agentry

Hi;
I am working on customising Work Manager 6.0 on Agentry Editor 6.1.3. I have a list of personnel on the left side of the screen and on the right hand side, I have a check box that shows for every personnel selected on the left side. Somehow when I tick this check box and move on to select another personnel, when I return to the previous one that I had checked, the check is gone and the check box is empty again. What steps do I have to do/undertake so as to retain this check box tick even when I navigate/select another personnel with their own tickbox?
Your help is very much appreciated!
Thanks and Regards;
Sizo Ndlovu

Hi Jason;
Thank you for the prompt response, ok, so I am using the WPF Client on windows to do the testing. This is a totally new screenset that I have created from scratch. Please see screenshot:
The screen on the left hand side is a Tile List.
The screen on the right hand side is a transaction screen that is being called by a Tile Edit defined field. What I would like to do is that, when a particular individual/personnel has been selected on the left and ticked on the right hand side, have their details: PersName, PersID and Work Centre stored on a different object/table for transmission later to the backend. This check box is created as a button on the screen and attached to a boolean property type, true when checked and false when unchecked.
I hope this answers all your questions to help me.
Thanks;
Sizo

Hidden Email Submit Button & Mandatory Check Boxes

Hi guys
I'm trying to get my form to only allow people to return the form (via email) once they have accepted the terms and conditions AND the privacy policy.
Their acceptance of these is confirmed by 2 check boxes called acceptservicesterms and acceptprivacypolicy respectively. For each of these check boxes I have added this script to 'initialise':
this.mandatory = "error";
this.mandatoryMessage = "You must accept our Services Booking Terms and Conditions to request a booking";
I have then set my email submit button (EmailSubmitButton) to 'hidden (exclude from layout)' and created a 'fake' email submission button in its place. The click event for the FakeEmailSubmitButton is scrpited as:
if (acceptserviceterms.rawValue != "bookingtermsagreed")
xfa.host.messageBox("You must accept our Services Booking Terms and Conditions to request a booking");
else if (acceptprivacypolicy.rawValue != "privacypolicyagreed")
xfa.host.messageBox("You must accept our Privacy Policy to request a booking");
else
EmailSubmitButton.execEvent("click");
Where the 'on' values are 'bookingtermsagreed' and 'privacypolicyagreed' respectively.
Unfortunately, this hasn't worked for me - I'm not sure if the javascript is completely correct, or if I have gone about this the right way. Can anyone shed any light on what I've done wrong please?
Thanks in advance

if (acceptserviceterms.rawValue != "bookingtermsagreed")
in this line the field name is acceptservicesterms but u typed as acceptserviceterms - letter s missing.
after this correction i am able to see the error messages.

Very elementary....what is the check box for in itunes?

Would someone please enlighten me on the functionality of the check boxes next to items in itunes? I check several songs I want to delete and then click Edit>Delete but only the ONE ITEM selected by the cursor is deleted. OK, so I know how to do shift-click to select a number of items then click Edit>Delete, but what in the dog-gone world is the check box for?!? when I search for help on "Check Box" no results are found. Also, if you like to show me how non intuitive I am by demonstrating how to find this solution in the Help menu, I would love to learn something from the exercise. Otherwise, I'm going to believe, beyond belief, that the itunes help is not very helpful!
Thanks, inspite of this insanely simple problem!
Alan

you can multiple select songs from your list by using the CTRL or SHIFT keys, and then you can right-click on the selected items and choose delete.
the check box is actually for auto-syncing; which means that if you have some songs checked in your library, then you connect your ipod, those checked songs will automatically update on your ipod, or transfered. (of course, thats only true if you have the auto-sync option selected, and not manual update).
another thing for the checked box; if you change anything to the song like ID tags, or artwork, .... they will automatically be changed and updated on that song on the ipod next time you plug it in.
i found out that this check box thing is useful if you wanna update your ipod ONLY with the new songs added recently to your library. this way, your ipod wont update all songs, it will only do the ones checked.
you can also right click on a bunch of songs and choose check selection, or uncheck selection.
hope i didnt forget anything, and i hope that helps.

Radio Buttons & Check Boxes Replaced w/ Rectangles, when printing Form w/ Adobe Reader XI (11.0.03)

Hello. I need to be able to print a .pdf copy of a completed web page form. The form is completed by entering data into text boxes and text areas, and selecting various radio buttons and check boxes. When the form is complete, it is saved, which converts the form into a .pdf file.
When I open the saved .pdf file, it looks completely normal. I will then select the print button, which is built into the display window for the form. The printed form will appear, but the radio buttons and check boxes will have been replaced with the outline of rectangles.
This is what the source form looks like, before printing:
This is what the printed image looks like, after printing. NOTE: All check boxes and radio buttons (and the data that they contained) are gone:
I am not sure if this is a setting that needs to be changed in Adobe REader XI, or something else.
Please let me know what you think it might be.
Thanks,
Rick

Michael,
It is a web/html form.
The forms are built and used inside of a software program called WebEOC.
WebEOC is used to allow for sharing information between different
emergency response entities (like a State, and the counties within the
State).
The form I am working with was built with a web page editing program. The
form uses html, xhtml, xml, CSS and javascript.
A for user would launch the WebEOC form (after logging into WebEOC), and
they would fill out the form. Text goes into text boxes and text areas,
dropdown menu selections are made, and some information is entered using
radio buttons and check boxes.
When the form is complete, it is saved within the WebEOC database, as a
.pdf file.
You can then open the .pdf file in order to see the form, in it's
completed state, as a pdf.
When I try to pint this pdf file of the completed form, the check boxes
and radio buttons are replaced with rectangles. Any selections made in
the radio buttons or checkboxes is lost.
Thanks,
Rick
[signature removed]

Why have I lost all my check boxes in Yahoo mail ?

Hello , Very recently my Yahoo Mail has gone bonkers and I have lost all my check boxes . You know the ones I would use to check which emails I'd like to delete etc,etc. It looks fine on my other computers and on this computer through Google chrome.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

HT201313 iTunes photo sync check box missing

In iTunes under the tab to sync photos, the check box is simply gone. I can't check anything to sync photos to my iPhone. What do I do?

I have a newer version of iTunes than the one shown in the example picture on the help page so the icon is actually on the left side. However, I can click on it and I have access to everything on my iPhone (music, videos, books, etc.) besides pictures. I have the latest version of iPhoto and only recently started using iCloud so I must have photos that aren't on it yet. Still, I cannot see any photo on my iPhone that I didn't take with the same iPhone camera, so even if my photos are on iCloud, I can't (or don't know how to) access them on my iPhone.

Check boxes gone

Similar Messages

Maybe you are looking for