Check for the postal code of Belgium

Hi Expert,
I have a question with the postal code in the infotype 6.
Normally the Belgian postal code must be in 5 digits (4 chiffers and one letter).
But for some reasons, in my society we must use only the postal code on the 4digtis.
So I know that I must change the custo table V_T5B5C.
And check all the custo for this.
But I would like in the infotype 6, enter manually the name of the village.
Because In belgium, several villages want have the same postal code.
So I would like remove the check in the infotype 6 on the postal code. So I would like that the system don't return the name of the village related to the postal code.
Someone can help me on this subject ??
Thanks in advance,
Virginie

Sorry I'm not familiar with IDocs, but you could just update field ORT01 from the new client-specific field in the user-exit "after input" (ZXPADU02) if you want to keep ORT01 correct at all times.
To create a new field, just create (if not yet done) structure CI_P0006 in transaction SE11, give your field an ID (starting with Z) and a data type (probably the same as ORT01). This will then automatically appear in a new subscreen (of module pool ZP000600) if I remember correctly. Then, you can change your new subscreen if you like using the screen painter (transaction SE51)...

Similar Messages

Removing the mandatory mark for the postal code in add new ship to address

Hello All,
Is there any configurtatoin available to make the postalcode optional in add new ship to address page for a particular country?.
What will be the bestway to do this?.
Regards
Shanto Aloor

There is no single configuration to help you.
See shiptodetails.jsp or shiptodetails1.jsp , the mandatory values are hard-wired and marked with "*" explicitly. For removing the visual cue, you need to change the JSP.
To suppress the CRM messages from showing in the web layer, see my message Re: Tax Jurisdiction In B2C Webshop (SAP CRM 7.0) as an optional field. and the messages therein.
Even these two may not grantee the full requirement. The error message comes as a part of validating the address of the business partner. You can get different behaviors for different "profiles" of BPs. But that requires you to maintain the configuration at (Tcode SPRO)
CRM--> Master Data --> Business Partner --> Define Profiles
Hope this helps.

HT1918 what is the postal-code for lebanon ? I cand find it :(

what is the postal-code for lebanon ? I cand find it

From a quick search, some of the results that I've found seem to imply that Lebanese addresses can have postal codes, which consist of 8 numbers - the first 4 for the region, the second 4 for the building. Are you being forced to enter a post code ?
What sort of visa card are you trying to add, debit or credit ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

Authority Check at the T.Code level for the user in particular User Group

Hi Friends,
I have created a ZREPORT and assigned this report to a ZTRANSACTION CODE.
Need to give Authority Check at the T.Code level for the user in particular User Group.
I have searched in SCN, but not get suitable pages.
How to solve this?
Regards,
Viji.

Hi Viji.
Saha way is actual way for authority tcode but user authority in TCODE:- SE38 he/she can run report(ZREPORT) wise program is run is no authority check.
Another way is you have also check authority in program level.
DATA: T_ROLE_USERS TYPE STR_AGRS OCCURS 0 WITH HEADER LINE.
   INITIALIZATION.
CALL FUNCTION 'ESS_USERS_OF_ROLE_GET'
    EXPORTING
      ROLE       = 'ZROLE'' " Role define
    TABLES
      ROLE_USERS = T_ROLE_USERS.
READ TABLE T_ROLE_USERS WITH KEY UNAME = SY-UNAME.
   IF SY-SUBRC NE 0.
   RETURN.
   ENDIF.
Thanks & Regards
Rahul

How to check for the sub folder in the document library Is already Exist using CSOM?

Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
            context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
            camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
                                        <Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
                                            </Eq>
</Where>
</Query>
                            </View>",
@"/sites/test/hcl/"
+ InputFolderName);
            Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
            context.Load(listItems);
            context.ExecuteQuery();
if (listItems.Count > 0)
                retStatus =
true.ToString();
else
                retStatus =
false.ToString();
catch (Exception ex)
            retStatus =
"X02";
return retStatus;
thanks
Sundhar

Hi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support

Required clarification for the below code:

Hi All,
For one of my requiremnet, i found one solution which worked as expected.. But i was not able to understand the logic.. Can any one explain me the below
syntax what exactly the meaning for the below code:
Code:
SELECT NULL
FROM apex_application_page_ir_cond cond
WHERE cond.application_id = v('APP_ID')
AND cond.page_id = v('APP_PAGE_ID')
AND cond.condition_type = 'Filter'
AND cond.condition_enabled = 'Yes'
AND cond.report_id = (SELECT report_id
FROM apex_application_page_ir_rpt
WHERE application_id = v('APP_ID')
AND page_id = v('APP_PAGE_ID')
AND application_user = v('APP_USER')
AND report_type = 'SESSION'
AND TO_CHAR (session_id) = v('SESSION')
AND report_name IS NULL))
For your refernec i have enclosed the link also
URL : Re: Interactive_Report with Search Bar only
Thanks,
Anoo..

Anoo,
Two things. First, it makes things a lot easier if you put "{code}" (no quotes) around your SQL when you post it:
SELECT rowid "EDIT", attr_code,ATTR_ATCL_CODE "Atcl Code", attr_description, attr_atcl_code,
                attr_abbreviation,
                attr_include_short_desc "Include short desc",
                attr_include_long_desc "Include long desc",
                attr_attr_type "AttrType", rowid "DELETE"
           FROM t_new WHERE EXISTS (SELECT 1 FROM APEX_APPLICATION_PAGE_IR_COND WHERE APPLICATION_ID = :APP_ID AND PAGE_ID = :APP_PAGE_ID AND CONDITION_ENABLED = 'Yes'
AND APPLICATION_USER = :APP_USER) ORDER BY attr_description;Though the spacing still needs work, it's a little easier to read.
Second, your query's exist clause just checks for an enabled condition, without checking the condition type. Without checking, I'd guess that either APEX creates at least one internal condition, or that your IR has a default condition on it (other than a filter). Try adding the condition_type constraint to your where clause to see if that fixes it.
Also, I noted that you don't have the extra code for getting the report_id. It shouldn't be necessary, since there's currently only support for one IR per page, but you asked what the differences are.
-David

Reg : Enhacement for the transaction code MD04

Hi experts,
I have implemented an user exit for the transaction code MD04 where in the stock/requirement list I am supposed to add a new column for the exception number which displays the exception description for the corresponding exception number.
The coding part for fetching the exception description for the corresponding exception number is done in the include 'ZXM61U03'.
The problem is in the importing parameter IMDEZEXIT in which all the screen data will be present basing on which the data fetching is done .The AUSKT(Exception number) value is not getting populated . All the other data in the row is getting populated.
Please suggest e a solution for this.
Regards,
Ramkishore.

Hi
Hope it will help you.
reward if help.
Please use FM MD_STOCK_REQUIREMENTS_LIST_API to get all information for transaction MD04/MD05.
You might also want to check out the function module API.
MD_MRP_LIST_API
and also
check this link for extracting data from MRP tables:
http://www.sap-img.com/pp001.htm

For the ISO code TRY there is no unique SAP currency code for ALE

Hi,
I was trying to download cost centres from FICO to SAP HR via BD17.
These are Turkish cost centres.
I received an error: For the ISO code TRY there is no unique SAP currency code for ALE
What is missing and how can it be fixed? I guess it is sth on ALE side so probably requires some config from Basis?
Or correct me if I'm wrong.
Thanks in advance!
Monika.

Hi satya,
Not sure if this might help ... check out this OSS note "Note 313772 - Performance problem in CURRENCY_CODE_SAP_TO_ISO"
Regards
Genie

For the ISO code there is no unique SAP currency code for ALE

While entering in incomming invoice , we got this error message.
"For the ISO code there is no unique SAP currency code for ALE" .Any idea what this error is related to ?
Thanks
SN

Hi satya,
Not sure if this might help ... check out this OSS note "Note 313772 - Performance problem in CURRENCY_CODE_SAP_TO_ISO"
Regards
Genie

For the currency code ALE communication is not allowed

Hi,
I am executing the transaction for - International Payment Medium Payment orders by EDI .
On executing this t-code I am getting this error "For the currency code ALE communication is not allowed" .
Please help me resolve this issue.
Thanks.
Hemanth

Hi,
Check if SAP Note 758433 can help?
Regards

Problems with the postal code in address iview ESS.

I would greatly appreciate if someone answer this threat. I am having this big problem with the address iview. It is not possible to change the postal code in the address iview.

Can you explain the issue? Means for which country this issue is coming. We faced similar issue. There is some bug in ESS/MSS package itself. You send me details of issue at [email protected] I will reply you back with OSS message answered by SAP if that is a bug.

Search for the t-code where the specefic output type is used

Hi
I want to know how can we search for the t-code used for a specefic output type in use?
I have a requirement where in i have a output type, i knwo teh prog name and the form name...
i know it is used in SD and billing but i am not able ot exactly pin point as to in which t-code to be used..so that i can check the output throught the T-code.
Experts sugget!!
Thanks
Prashant

Hi
It is used for a Standard t-code i want to find that T-code. Through NACE the outputtype (which i already have) i can find teh prog name and the form name.
and through SPRO also its the same info...
i want to knwo for SD-> Billing->INvoice i can find the output type...i want to knwo what T-code needs to be run and on givign the data and running the out put type from the menu and choosing my OUTput type...and seeing the output in the print format.
Hope you got my problem.Thanks for the reply.
Prashant

Performance checking inside the source code

performance checking inside the source code who to check it.
thanks and regards
chandra sekhar

I guess you are asking how to check it, then here is the answer
SQL Trace transaction ST05
The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on the SPFLI table in our test program is mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use

Power Map Locations for Canadian Postal Codes showing incorrectly

I see great potential in the possibilities of using Power Map. However the location for one Canadian postal code is showing incorrectly on the resulting map. I have verified that the postal code itself is correct and my data has been entered correctly and
it is below:
N6K 0B3
It is showing nowhere near where it is supposed to be. Users of the application have to have confidence that the mapping behind it is correct. I need to create maps for each poll for volunteers to retrieve
the signs post-election and don't want to send them to the wrong locations.
By the way, why is my font size changing if I modify the text in my post?
Thanks,
Lila

Ahh Geolocations are fun, aren't they!
Bing maps is showing N6K 0B3 as just south west of London, ON. Google maps shows it north of there, West of London. If Bing is not correct, you'd need to request a fix from Bing/Microsoft.
While you wait for that, you'd have to create your own kludge to correct it:
CASE WHEN postcode = 'N6K 0B3' THEN geography::Point(-81.437296,43.0041629,4326) ELSE bingsGeospatial as geoPoint
I was in talks with Canada Post regarding acquiring their geo location data for post codes a while ago. You can get a product from them for about 7500 a year. I was rather disappointed to find they only provided points, and not bounding boxes (as google
maps does).

Regular expression: check for the presence of special characters.

I have the following requirement:
I need to check for the presence of the following characters in a keyword: @, #, > if any of these characters are present, then they need to be stripped off, before going further. Please let me know the regular expression to check for these characters.

I am trying to extend the same logic for the following characters:
.,?!@#%^&*()-~<>[]{}\+=`©® . here is the code fragment:
Pattern kValidator = Pattern.compile("[\\.,\\\\?!@#%^&*()-~<>[]{}\\+=\\`©®]");
Matcher kMatcher = kValidator.matcher(keyWord);
if (kMatcher.find(0)) {
keyWord = keyWord.replaceAll("[.,\\\\?!@#%^&*()-~<>[]{}\\+=\\`©®]", " ");
}I get the following error. This error is from the weblogic command window. I dont understand these special characters.
Error:
28 Oct 2008 12:27:48 | INFO | SearchController   | Exception while fetching search results in controller:Unclosed character class near index
39
[\.,\ΓÇÿ\ΓÇ£?!@#%^&*()-~<>[]{}\+=\`┬⌐┬«]
                                       ^
java.util.regex.PatternSyntaxException: Unclosed character class near index 39
[\.,\ΓÇÿ\ΓÇ£?!@#%^&*()-~<>[]{}\+=\`┬⌐┬«]
                                       ^
        at java.util.regex.Pattern.error(Pattern.java:1650)
        at java.util.regex.Pattern.clazz(Pattern.java:2199)
        at java.util.regex.Pattern.sequence(Pattern.java:1727)
        at java.util.regex.Pattern.expr(Pattern.java:1687)
        at java.util.regex.Pattern.compile(Pattern.java:1397)
        at java.util.regex.Pattern.<init>(Pattern.java:1124)
        at java.util.regex.Pattern.compile(Pattern.java:817)

Check for the postal code of Belgium

Similar Messages

Maybe you are looking for