Removing the mandatory mark for the postal code in add new ship to address

Hello All,
Is there any configurtatoin available to make the postalcode optional in add new ship to address page for a particular country?.
What will be the bestway to do this?.
Regards
Shanto Aloor

There is no single configuration to help you.
See shiptodetails.jsp or shiptodetails1.jsp , the mandatory values are hard-wired and marked with "*" explicitly.  For removing the visual cue, you need to change the JSP.
To suppress the CRM messages from showing in the web layer, see my message Re: Tax Jurisdiction In B2C Webshop (SAP CRM 7.0) as an optional field. and the messages therein.
Even these two may not grantee the full requirement. The error message comes as a part of validating the address of the business partner. You can get different behaviors for different "profiles" of BPs. But that requires you to maintain the configuration at (Tcode SPRO)
CRM--> Master Data --> Business Partner --> Define Profiles
Hope this helps.

Similar Messages

  • Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST

    hi all ,
    Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
    what all data i need to give to post a document.
    Thanks and Regards
    JK

    Hi...
    part of my source code:
    ** Header Data " Sending comp code
    wa_documentheader-comp_code = 'XXXXX'.
    wa_documentheader-doc_date = '20060620'.
    wa_documentheader-pstng_date = '20060620'.
    wa_documentheader-doc_type = 'XX'.
    wa_documentheader-username = sy-uname.
    wa_documentheader-ref_doc_no = 'XXxxxxxx'.
    wa_documentheader-header_txt = 'Text Header.
    wa_documentheader-bus_act = 'XXXX'.
    *it_currencyamount
    wa_currencyamount-itemno_acc = '1'.
    wa_currencyamount-currency = 'COP'.
    wa_currencyamount-amt_doccur  = 1943.
    APPEND wa_currencyamount TO it_currencyamount.
    *it_accountpayable
    wa_accountpayable-itemno_acc = '1'.
    wa_accountpayable-gl_account = '1234567890'.
    wa_accountpayable-bus_area = 'DIV'.
    wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
    wa_accountpayable-pmnt_block = ''.
    APPEND wa_accountpayable TO it_accountpayable.
    *it_accountgl
    wa_accountgl-itemno_acc = '2'.
    wa_accountgl-gl_account = '1234567890'.
    wa_accountgl-item_text = 'Text 2 XXxxxxx'.
    wa_accountgl-bus_area = 'DIV'.
    APPEND wa_accountgl TO it_accountgl.
    wa_currencyamount-itemno_acc = '2'.
    wa_currencyamount-currency = 'COP'.
    wa_currencyamount-amt_doccur  = ( 1943 ) * -1.
    APPEND wa_currencyamount TO it_currencyamount.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
      EXPORTING
        documentheader = wa_documentheader
      TABLES
        accountgl      = it_accountgl
        accountpayable = it_accountpayable
        currencyamount = it_currencyamount
        return         = it_return.
    clear it_return.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
          EXPORTING
            documentheader = wa_documentheader
          TABLES
            return         = it_return
            currencyamount = it_currencyamount "currencyamount
            accountpayable = it_accountpayable "accountpayable
            accountgl      = it_accountgl "accountgl
          EXCEPTIONS
            OTHERS         = 01.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

  • How to find the BTE event for FBCJ transaction code

    Hi All,
            i need to find the BTE event for Finance related transaction codes.i checked in the SWEL transaction code, didnt find any event triggered and the standard BADI doesnt suite my requirement.The transaction code  which i tried is FBCJ.can anyone help me how to find the BTE event for the above mentioned transaction.
    Thanks in Advance,
    lokesh kumar.K

    Hello Lokesh,
    The following is one of the process of finding a BTE and implementing it.
    (1)Goto transction FIBF .Execute it with Attribute type = 'A'. Then in the menubar Environment->Info System (P/S )
           Go through the list of BTE's available with the description available beside.
    (2)Select the BTE you want to implement.
    (3)Press button Sample function module
    (4)This brings you to SE37 - Copy the sample function module to a Z-function module (First create a new function group for the function module) . Note: The name of the Z-functionmodule is not important
    (5)Edit the code in the new function module
    (6)Go back to transaction FIBF - Menu Settings->Products -> Of a customer and create a new product whicj identifies the new product . Remember to mark the Active field.
    (7)Go back to FIBF menu Settings->P/S function modules->of a customer - Create an entry that links the BTE and Product with the new function module
    Hope this will help.
    Regards,
    Samson

  • Windows cannot verify the digital signature for the drivers required for this device. Code 52

    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
    I have reinstalled, uninstalled, the whole 9 yards.

    See the driver topic of:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    Hello farahani hairon nizar,
    If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information. 
    If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/en-us/HT203828
    Regards,
    -Norm G.  

  • Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

    I get this message when I check the Device manager for my Ipod
    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
    How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

    I reinstalled Itunes a couple of times.  I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems.  I have a yellow causion lite when I look at the USB-port with the phone connected.  All other devices work without a problem.

  • GET_FILE_LIST action:Folder & Mask are the mandatory inputs for this action

    hi all,
    Iam using GET_FILE_LIST action to retrieve few files from a folder stored in WEB directory. Folder & Mask are the mandatory inputs for this action to read the files. To get any xml files we can use the Mask value as ".xml". Is there a way or any mask value which would get all the files from the folder and then using a condition or switch I can create a desired sequence based on file type.
    Thanks,
    Gilmour

    Hi Gilmour,
    Try with mask value  *  ("asterisk")
    or
    ("asterisk.asterisk")
    Regards,
    Anil
    Edited by: Anil Dwivedi on Feb 19, 2009 9:42 AM

  • How to consolidate the financial statements for 3 company codes, assigned t

    Hi Friends,
    How to consolidate the financial statements for 3 company codes, assigned to 3 different companies, 3 different fiscal years, 3 different controlling areas and all the 3 Company Codes assigned to same chart of accounts in the same client?
    Can we need any ABAP program for this (or) Is it possible using Report Painter?
    Please help me.
    Thanks

    Hi friend,
    Is it a real-time situation or something you are visualising ?
    For consolidation, you can use a group chart of accounts and select that in the operative chart of accounts for consolidation purposes.  This would work provided the company codes use the same operative chart of accounts and fiscal year.
    I hope the above would be helpful to you.
    Regards,

  • When I ask Siri the stock price for MBL (other codes work fine), my iphone 5 crashes - does this happen to anyone else?

    When I ask Siri the stock price for MBL (other codes work fine), my iphone 5 crashes - does this happen to anyone else?
    It doesn't shut down completely, but mid-response the Apple shows and then it pops up to put in my pin.

    Nope nothing yet - a few friends have true it and have the same reaction."

  • Does Resetting Internet Explorer Maintenance settings from GPO will also remove the proxy set in IE by a third party tool when the GPO refreshes for the first time

    Hi,
    We have two GPO's with IE maintenance (Preference Mode Configured)
    The settings it has are
    1. Automatically detect configuration settings - Set to Enabled.
    2. Automatic Browser configuration - Not configured.
    We do not have proxy value set in IE through this GPO.
    We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
    Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh. 
    I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
    Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.

    It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
    Thanks
    Ryan

  • Hide the error msg for the mandatory fields

    hi
    how can i hide the error msg for the mandatory fields when they are not entered?? when i don't put a value in a mandatory field and commit the form, an error msg occurs teelling to enter the value for that mandatory field, but the error msg is not friendly at all and i want to hide it.
    thnaks

    User,
    I'll assume you are talking about ADF Faces + ADF Business Components application, since you don't mention it.
    If you are talking about the pop-up Javascript dialog box that pops up, you can do the following:
    1). Set required=false on those fields in your JSP.
    2). Set showrequired=true on those same fields so that there is a visual indication that the fields are required
    3). Ensure the attribute to which the fields are bound have "mandatory" set to true in the BC's
    Now, when you commit the form, you will not see the Javascript pop-up, but you will see a message in the af:messages component.
    Best,
    john

  • HT201269 I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and  basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can

    I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and  basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?

    You can't reset it.  If you don't konw the password then you can't use that backup

  • How to remove the question mark from the dock

    How do I remove the question mark from the dock.  Nothing I tried works.

    What have you tried?
    What happens when you click on it?  Does a menu appear?
    Would you provide a screen shot (SHIFT COMMAND 4).
    Ciao.

  • [svn:osmf:] 10579: Removed the src folder for the AkamaiBasicStreamingPlugin, this folder structure made it impossible to load the swf as a static plugin .

    Revision: 10579
    Author:   [email protected]
    Date:     2009-09-24 16:40:08 -0700 (Thu, 24 Sep 2009)
    Log Message:
    Removed the src folder for the AkamaiBasicStreamingPlugin, this folder structure made it impossible to load the swf as a static plugin.
    Modified Paths:
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
    Added Paths:
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/AkamaiBasicStreaming PluginInfo.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/AkamaiMediaEr ror.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/AkamaiMediaEr rorCodes.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ion.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ionFactory.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetLoader. as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetNegotia tor.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetStream. as
    Removed Paths:
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/src/

    Hello
    On my flash, I already have those parameters in place.
    I don't think there would be any security issues however, since I have used a player .swf which loads from the media site and plays the videos without a problem.
    http://www.iongeo.com/channelguide_test_dev/
    click on the four images at the bottom of the screen to see how it works.
    Now, I am pretty much doing the same thing, but this time embedding the other swf to load the videos.  As I mentioned, I was able to do this when everything was on our server, but now there is an issue for some reason when I try to load the .flv into the .swf from the other media server.

  • IOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    iOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
    You cannot play movies from ATV without itunes, which streams to the ATV.
    If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
    The next issues is speed of slowest connection.
    Your download to your home maybe great.. what is the upload speed from your office like??
    If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net..  and third to download it again.. net to home..  Sorry but it is better to play the movie directly from online itunes store.
    If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
    Overall this sounds like you need to think it out a bit more.

Maybe you are looking for