Check in qa32 transaction

hi,
  my requirement is in transaction QA32 (inspection lot selection) ,suppose from the list of inspection lot data ,any lot is having a lot quantity of 100 and in usage decision i post 50 stock out of 100 and do usage decision then it pops a message 'Reqd characterstics still open.Do u want to force inspection completion' and if i choose yes the stock is posted.
         i want that till complete lot quantity in any lot is not posted force inspection can't take place .a message should pop for the user.
            any cooments.

Dear Nehal,
Status is there for all teh inspection lot, but it is coming empty. lask week i used to get system status for all the lots.
Now If i see old lots status field is coming blank. I think some body made this setting.
Please suggest how to get this status .
Thanks
Don

Similar Messages

  • Addition of new field in the qa32 transaction

    HI,
    I have to add a new field in qa32 transaction.which is AFNAM in the alv output,for a given purchase document i have to display the requested by field,could any body tell me how to do it.
    Regards
    Abhinay

    this must be displayed when the inspection lot no given is 01.

  • CRM - Process Flow of Authorization Check in Business Transactions

    Hello Folks:
    I have implemented CRM security using Process Flow of Authorization Check in Business Transactions.
    What I have in place:
    CRM_ORD_OP (inactive, don't want access to own documents)
    CRM_ORD_LP (inactive, not using standard org level values Distribution Channel, Sales Group, Sales Office, Sales Organization, and Service Organization.)
    CRM_ACT (active)
    CRM_CMP (active)
    CRM_ORD_OE (active, restricted to display with dummy value ' ' for Distribution Channel
    Sales Group, Sales Office, Sales Organization and Service Organization, as we are not restricting on them)
    CRM_ORD_PR (active and restricted to display)
    Issue:
    Restrictions to display for documents works fine when using CRM backend system and the system throws out a message that you are not authorized to change. But, when i come in through Portals (PCUI), i dont get the display at all and it throws out a message insufficient access authorizations.
    Traces on backend CRM reveal failing on change access for CRM_ORD_LP and CRM_ORD_PR, which we dont want to give out b/c we dont want to provide change for documents.
    OSS notes to SAP have resulted in no results....please advise what is wrong here.
    Thanks
    KT

    Thanks for the Priyanka for the reply, but what you mention is not correct.
    BSP errors are different from what I am refering to.
    The issue is still open...and looks like a SAP bug, which even they havent been able to fix so far.
    Regards,
    KT

  • Authorization Check in Business Transactions

    Hi All,
    i need to create Authorization Check for Business Transactions ( create/display/change ).
    The standart sap Authorization  object CRM_ORD_OP  or CRM_ORD_LP is no good for me .
    does  anyone know  a BADI or something else i can use ?
    Thanks
    Lilach.

    I would suggest to give the authorization with CRM_ORD_OE if he isn' t in the document may be he is the organization which is selected on the activity..
    For details, please have a look at this link :
    http://help.sap.com/saphelp_crm70/helpdata/EN/48/a44236ceb873e8e10000000a42189b/content.htm
    BR,
    Cenk Sezgin

  • Check in Billing Transaction

    Dear All,
    I want to place a Check in Billing Transaction that the Billing Date must be equal to the ACTUAL GI DATE of the Delivery Document. There are chances that sometimes User changes the Billing date while generating the Billing Document.
    So please tell whether it can be possible through Customization or not. If possible then how?
    If not possible, then please tell me the best UserExit in which I should write the code for it.
    Regards,
    Vishal

    Hi Lakshmi,
    But this userexit i.e. USEREXIT_NUMBER_RANGE_INV_DATE has one condition that if this exit is activated then USEREXIT_NUMBER_RANGE will be DEACTIVATED.
    And already in USEREXIT_NUMBER_RANGE, a code has been written to get the Billing Number.
    Now the question is: Should I put the same code in this USEREXIT_NUMBER_RANGE_INV_DATE also?
    Regards,
    Vishal

  • Check whether a transaction is running

    I need to know if there is a function I can use to check whether a transaction is being run by a specific user.

    hi,
    there is some stand teransaction called STAT(not sure abt the name ) which gives u the details abt the last reun transaction run pls chekc that out... or go to table TSTC and give STA* it will disply u some transaction just read the help info to find out the transaction..
    check also the transaction STAD..
    Thanks
    Ashu

  • Check Incoming/Outgouing Transaction

    Hi, is any way, how I can check incoming/outgoing transaction to/from database Oracle in my own third party application? Is possible set database server Oracle that way to send all transaction to my own third party application, or any other way to get same effect?

    IMHO you don't have incoming/outgoing transactions on your database. You've incomming statements and outgoing resultsets. The transactions is on your database.
    If you want to protokoll every DML statements which were executed on your system than you can use the logminer.
    Regards
    Marc

  • Entry to QA32 transactions

    Hi,
    My requirement is that entry into QA32 tcode should be restricted based on particlular User Name, Plant, Inspection type and Storage location. Others should not view the QA32 transactions. I request your help to solve my requirement.
    Thanks & Regards
    V.Devaraj

    First, why limit QA32 to specific users?  QA32 is simply a work list.  It's usaully the transaction under QA32 that we use to control access.  I.e QA11, QA12, QE01, QA02, etc.... 
    If its simply that you are looking for a way to help the user only see those lots they need to deal with, then create a user variant for the user for QA32 where the storage location is populated with their particular storage unit.
    I've never heard of the need to secure QA32 itself.  Can you describe the business reason for this and why teh security on the underlying transactions wouldn't work?
    FF

  • FM or table to check whether a transaction is locked or not

    Hi all.
        I  need to create change a return order (VA02 Transaction ) & then need to create a delivery (VL01N Transaction) for this
       return order no. My issue is before creating delivery (VL01n) I need to check whether return order (VA02) is lockked or not in report program. Is there any FM or table for this.  Thanks in advance.
    Kind Regards,
    sami

    Hi,
    check the below function module to check the return order is locked or not..
          CALL FUNCTION 'ENQUEUE_EVVBAKE'
            EXPORTING
              mode_vbak      = 'E'
              mandt          = sy-mandt
              vbeln          = w_lvbeln  "pass return order
              x_vbeln        = ' '
              _scope         = '2'
              _wait          = ' '
              _collect       = ' '
            EXCEPTIONS
              foreign_lock   = 1
              system_failure = 2
              OTHERS         = 3.
          IF sy-subrc NE 0.
    " Sales Order is locked
          ENDIF.
    Prabhudas

  • Condition type check in va01 transaction

    Hi friends,
    I have a requirment.
    in va01 transaction , at the line item level iam entering a  material number and order quantity and  when i press enter i get the corresponding values for that particular line item.
    now iam double clicking on that particluar line item(matnr) and clicking on the conditions tab.
    there in the condtion type i will get what all the condition types are maintianed for that particular line item.
    now my requirment is i need to add another concdtion type manully
    say 'ZABC' and hit enter. the pricing for that particlular contion type 'ZABC' will be Determined.
    Now  can any one tell me in which internal table will i get all the condition type,
    coz i need to do some additional check for the  the manual entry'ZABC'  (condition type ) which i have given .
    which user exit should i use it.
    remember i need user exit for condition type check but not for pricing bsaed on the contion type
    Regards
    Priyanka.

    Hi priyanka
    If you want to Check  then check in the  KOMK and KOMP tables
    As you want to go for user exit use any one of the user exits as per your requirement  USEREXIT_PRICING_PREPARE_TKOMK  or USEREXIT_PRICING_PREPARE_TKOMP
    But can you tell what exactly you want to change and why you want to go for user exits
    Regards
    Srinath

  • Error in "check" in PRRW transaction: RW609 and NR751

    Hi all,
    When i run the PRRW transaction and when i press "check", the errors below appear:
    E RW609 error in document number: TRAVL 2000000250 SYSLOG010
    E NR751 Para o objeto RF_BELEG XXX, number range does not exist FBN1
    I already entered a range number in FBN1 transaction. I already made changes in SNRO in RF_BELEG object but no succes.
    Someone please could help me?
    Thanks in advance,
    Regards,
    Teresa Laia

    Hi,
    a few minutes ago i got the point...
    i forgot to maintain the number range field in the document type TR in transaction OBA7 ... that is why the error.
    Many thanks.
    Kind Regards,
    Teresa

  • Print 3rd Party  Check using F110 Transaction

    Hi Folks
    I am working on US Payroll.
    I am executing the following programs.
    1)RPCALCU0 to calculate payroll
    2)Posting to Accounting
    3)Third Party Posting
    Everything is working fine.
    Now i want to transaction code F110(Print 3rd Party check) to do check printing for Garnishment.
    Here only i am not getting the correct out put for one employee for check printing.
    The correct format is like this.
    We have check in the upper column
    and in below column we have
    Garnishment Information:
    Employee Number:
    Employee Name:
    Social Security:
    Case Number:
    Error message we are getting is:                                                                               
    B!015                    The OPEN_DI of BTE 00002060 could not determine any function modules                                           
    F0286                    Payroll: Pmnt advice section missing for check C001 CMB09 DIS01 001331                                         
    Appreciate if any one can help me to solve the issue and to print the 3rd party check for garnishment.                                                                               
    Regards,
    Rajendra.

    When the SAPscript form is called, it uses the formname which is setup in configuration.  The following is the path in configuration (t-code SPRO) where the formname is entered:
    SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Business Transactions>Outgoing Payments>Payment Media>Make Settings for Classic Payment Medium Programs-->Assign Payment Forms for Payment Method in Company Code
    This path (in SPRO) will allow you to setup payment methods and the corresponding form names for a particular company code.  Once you select a specific company code and click on the "Allocate forms to payment method in company code" folder in the left-hand window area, it looks like you have the option to specify a SAPscript formname or a "PDF-based Payment Medium Form"
    I am unsure of the actual logic used to call the Adobe form.

  • Authorization Check in Business Transactions in CRM 2007

    Hi everybody, I have a problem whit the authorization check in CRM 2007.
    This link help me to follow the steps
    http://help.sap.com/saphelp_crm60/helpdata/en/e9/b29a39e7aee372e10000000a11
    I follow this steps:
    1.- Created a new single role on the PFCG
    2.- On the Menu tab add the transaction BSP_CRMD_BUS2000108 (Trax for LEADS)
    3.- On the authorization tab create a new profile and in the authorization data set the values for CRM_ORD_OP: PARTN_FCT ‘00000012’, PARTN_FCTT ‘*’, ACTVT ‚'02,03’
    4.- Generate the authorization.
    5.- Set my user "TESTUSER" on the user tab
    6.- Save the profile
    Then, I login to CRM whit TESTUSER and I see all the leads.  I miss something, what could be the problem ?
    Thanks for your help

    Hi Shaji, Pankaj and Jushan, thanks four your answers.
    I still have the same problem, I want to see only my leads that I´am the responsible, after I generated the authorization and assign the role to my user from tcode PFCG and SU01, I logout and login again and no changes, I still see all the leads.
    Another test I made, I changed the authorization data and set the values for CRM_ORD_OP: PARTN_FCT ‘’, PARTN_FCTT ‘0008’, ACTVT ‚'’   (person responsible)  and the results was the same, see all the leads.
    How works the User Comparisons and how can I check for errors in my pfcg role ?
    Thanks for your help.

  • Exit for PO number checking in VA01 Transaction.

    Hi Experts,
    Does there exists any exit to perform PO Number checking while it is been entered in the VA01 transaction.
    There is a requirement to perform some extra validation when this checking is performed.

    Hi,
    Please check the exit V45A0001.
    regards,
    Renjith Michael.

  • Additional check in Delete Transaction

    I'd like to add 2 if statements to the this delete transaction and check the @rowcount value before the COMMIT, is this the correct way to do it:
    DECLARE @APP_ID uniqueidentifier
    SET @APP_ID = '1234'
    BEGIN TRY
    BEGIN TRANSACTION;
    --There could be more than 1 record deleted from this Table
    DELETE
    FROM dbo.SERVERS_APPS
    WHERE SA_APP_ID = @APP_ID
    IF @@ROWCOUNT >= 1
    --There should only be than 1 record deleted from this Table
    DELETE
    FROM dbo.ENVIRONMENTS_APPS
    WHERE ENVA_APP_ID = @APP_ID
    IF @@ROWCOUNT = 1
    COMMIT TRANSACTION;
    END TRY
    BEGIN CATCH
    ROLLBACK TRANSACTION
    END CATCH

    Instead of the way you have written, I would suggest that you write only one IF statement checking the count of the records as required.
    DECLARE @APP_ID UNIQUEIDENTIFIER
    SET @APP_ID = '1234'
    BEGIN TRY
    BEGIN TRANSACTION;
    IF (SELECT COUNT(1) FROM dbo.SERVERS_APPS
    WHERE SA_APP_ID = @APP_ID)>=1
    AND
    (SELECT COUNT(1) FROM dbo.ENVIRONMENTS_APPS
    WHERE ENVA_APP_ID = @APP_ID)=1
    BEGIN
    DELETE
    FROM dbo.SERVERS_APPS
    WHERE SA_APP_ID = @APP_ID
    DELETE
    FROM dbo.ENVIRONMENTS_APPS
    WHERE ENVA_APP_ID = @APP_ID
    END
    COMMIT TRANSACTION;
    END TRY
    BEGIN CATCH
    ROLLBACK TRANSACTION
    END CATCH
    Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
    The climb is all there is.

Maybe you are looking for