Exit for PO number checking in VA01 Transaction.

Hi Experts,
Does there exists any exit to perform PO Number checking while it is been entered in the VA01 transaction.
There is a requirement to perform some extra validation when this checking is performed.

Hi,
Please check the exit V45A0001.
regards,
Renjith Michael.

Similar Messages

  • User Exit for assignment number check

    Hi SAP GURUS,
    I want to have a cheque in system for not to enter a cheque number twice in assignement field. Which user exit i can use for the cheque payment made thru F-53 OR F-58 OR F110.
    Thanks
    CHEERS
    Edited by: NITIN on Apr 26, 2010 7:50 AM
    Edited by: NITIN on Apr 26, 2010 11:18 AM

    Identification of user EXIT
    1.     Enter T.code for which you want to maintain User exit. For ex : ME51 (Purchase requisition)
    Path:  Status Status Double Clicks on the program NameGo toAttributesNote down development class.
    For Ex : ME51u2014development class/package name is  ME
    2.     Enter T.code : SMODutilities FindEnter Development class/package name Execute
    3.     It shows all the Exit names. Click on Exit Name and click on Functional module name.
    for ex: f-53 having following exits.
    F050S001  FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002  FIDCC1: Change IDoc/do not send
    F050S003  FIDCC2: Change IDoc/do not send
    F050S004  FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005  FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006  FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007  FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001  Balance Sheet Adjustment
    FARC0002  Additional Checks for Archiving MM Vendor Master Data
    FEDI0001  Function Exits for EDI in FI
    RFAVIS01  Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00  Line item display: Checking of selection conditions
    RFKORIEX  Automatic correspondence
    SAPLF051  Workflow for FI (pre-capture, release for payment)
    Thanks
    ANJI

  • Condition type check in va01 transaction

    Hi friends,
    I have a requirment.
    in va01 transaction , at the line item level iam entering a  material number and order quantity and  when i press enter i get the corresponding values for that particular line item.
    now iam double clicking on that particluar line item(matnr) and clicking on the conditions tab.
    there in the condtion type i will get what all the condition types are maintianed for that particular line item.
    now my requirment is i need to add another concdtion type manully
    say 'ZABC' and hit enter. the pricing for that particlular contion type 'ZABC' will be Determined.
    Now  can any one tell me in which internal table will i get all the condition type,
    coz i need to do some additional check for the  the manual entry'ZABC'  (condition type ) which i have given .
    which user exit should i use it.
    remember i need user exit for condition type check but not for pricing bsaed on the contion type
    Regards
    Priyanka.

    Hi priyanka
    If you want to Check  then check in the  KOMK and KOMP tables
    As you want to go for user exit use any one of the user exits as per your requirement  USEREXIT_PRICING_PREPARE_TKOMK  or USEREXIT_PRICING_PREPARE_TKOMP
    But can you tell what exactly you want to change and why you want to go for user exits
    Regards
    Srinath

  • Field Exit for Sales Document Type in VA01

    hi
       i want to do field exit for Sales Document Type in VA01.
    but i dont know to find the correct exit.
    pls tell the exit name and the steps to find it.
    thank u

    Hi,
    Goto this link u will get the information u required....
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
    Check the numerous threads that already exist in SDN :
    CMOD and SMOD
    http://www.sap-img.com/abap/what-is-user-exits.htm
    Regards,
    Manish

  • Need a user exit for Export Control check in Sales Order fro VA01/VA02

    Hi ,
         I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ‘ultimate destination country’ User Exit needs to be built in with following logic
    1.     Check to see if ‘ultimate destination country’ field is maintained in Sales Order
    2.     If a value is maintained then for the Export control checks use ‘ultimate destination country’ instead of the Ship-To country (step 1)
    3.     If no value is maintained then use Ship-To country as default
    The user exit is called when the user creates or changes a Sales Order.
    Can anybody help ?
    Thanks

    Hi,
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    <b>Reward points</b>
    Regarsd

  • F4 help for PO date field in VA01 transaction during upgrade

    Hi All,
    We are working on upgrade project 4.6c to ECC 6.
    We came across one scenario.
    F4 help for PO date field is not coming in newer version in VA01 transaction but i checked in older version it is coming F4 help for PO date(calender).
    May i know the reason regarding this.
    Any clues
    Regards
    Jai
    Edited by: Jayanth16 on Nov 12, 2009 6:14 PM
    Edited by: Jayanth16 on Nov 12, 2009 6:22 PM

    Hi,
    User did some changes in include LSDSDF05 due to that F4 help is not coming.
    So i correct that one.
    Regards
    Jai

  • User Exit for "Serial Number" in VL02N before "Post Goods Issue".

    Hi Friends,
    Current Scenario:
    End User has to scan "Serial Number" for Main Unit (Item CAtegory - TAN) while doing "Outbound Delivery". But, sometimes he forget to do this activity of scanning "Serial Number". And do "Post Goods Issue" without "Serial Number".
    Requirement:
    When End user will click "Post Goods Issue", system should first check "Serial Number" for Main Unit (Item Category - TAN). If he will not find "Serial Number" then system should give warning message for "Serial Number".
    Please suggest the suitable "User Exit" that can be used for above purpose.
    Or if there is any other way then let us know.
    Regards
    Siva

    hi
    check is there any standard User Exit available for VL02N. apply your logic and activate

  • BADI or USER Exit for BP Adress check

    Hi All ,
                what is the badi or user exit for giving a additional check on Postal Codes when creating a BP ?
    I have checked BUPA_ADDR_CHECK
    BUPA_ADDR_EXPORT
    BUPA_ADDR_IMPORT
    BUPA_ADDR_UPDATE
    BUPA_ADRREL_EXPORT
    and the user exit ZXSZARU01
    but when i am entering the postal code and pressing Enter , i am not able to catch the User/EXIt or badi .
    Thanks for help.

    Hi
      Use the BAdi : ADDRESS_CHECK
      Implement the method: ADDRESS_POSTAL_CHECK
    Once you enter the Post Code and Country on BP Txn, Pressing Enter will trigger this Badi for  address check !
    Good Luck !
    Thanks
    <b>Allot points if this helps !</b>

  • User exit for Credit Management check on SD document

    Is it possible to enhance and put in some custom logic during CREDIT check on SD documents?
    Can some one tell me which User exit can I used?

    Hi,
    Yes, I think you can do. Here is what SAP help says....
    If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
    LVKMPTZZ
    LVKMPFZ1: USER_CREDIT_CHECK1
    LVKMPFZ2: USER_CREDIT_CHECK2
    LVKMPFZ3: USER_CREDIT_CHECK3
    User exit for availability check
    User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
    This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
    Hope this helps
    Thanks
    Mukund S

  • User exit for CJ20n (to check budget when create Reservation) for project

    Dear All,
    Plz advice, is there any user exit for CJ20n(project builder) in order to check available budget when we create reservation under a network/activity for a project?
    Many thanks in advance.

    Hi,
    Budget functionality is available against actual / commitment items, but n't against reservation of materials as there cane be reservation at projects or plant level. Morever there is no such user exit in CJ20N.
    If you can make developments of reservation agsinst network as committments items then budget functionality may work in that case.
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • User Exit for Changing ATP Checking group

    Hi All
    I am new to this area. I have a requirement to change the ATP Checking Group  and ATP: Product availability check to new value.I was looking out if theres any specific user exit for this .Any pointers would be highly appreciated.
    Thanks
    Amruta

    Hello, still I do not have clearcut idea of business process for changing ATP group?
    However i have understood that u want to influence selection of ATP group in the process.
    In case u want to retain it for longer period, then u may use EXIt in cif which is called during transfer of Product master. With this u can have predefined value of ATP group as per your requirement.
    Else you may change the ATP group  in R/3 prior to ATP calls to APO.  U may use exit "EXIT_SAPLATPC_001" in program  " AVAILABILITY_CHECK_CONTROLLER". I am not sure which all prameters u can change in this exit
    Please test in detial before finalizing the design
    Regards
    Mangesh A. Kulkarni

  • Scree exit for Task tab details in IW21 transaction

    Hi All,
    I want to add a new field to the task details in the table control of task tab in IW21.
    This field will be added after List Name column in the table control.
    Please let me know the user exit for this screen 7120 of program SAPLIQS0.
    I need this urgent.
    Regards,
    Shahu

    Check these threads -
    BADI for IW21
    bdc for iw21
    Regards,
    Amit
    Reward all helpful replies.

  • Exit for delivery Date check in Sales order [Via EDI]

    Hi Friends ,
    We have a requirement in which if the Sales Order is created Via EDI with INVALID delivery date then I have to set a flag in some Z Table . I have tried searching for exits and debugging the code but was unable to find a place where SAP checks for delivery date validity . Please help me with possible exits/Badis?Enhancement Pts etc where I can mark this flag .
    Thanks & Regards
    Gaurav Deep

    @Vinod Thanks  for your reply , the delivery date is there in EXIT_SAPLVEDA_009 .
    But how will i check if the delivery date is valid or not , If you go to VA01 and give a invalid delivery date a warning message is issued , here if the warning message is issued then I want to set my flag , this might save my from  coding redundant delivery date check logic , can someone please help me how can i track if this warning message is issued .
    Thanks & Regards
    Gaurav Deep

  • Exit for batch no check not fired for Tr MFBF

    hi. experts,
    i'm new to abap.
    i've to check the manually entered BATCH No. entered in Tr. MFBF and accordingly throw a error message for wrong entry on the first screen.
    for this m using the exit SAPLV1ZE and its Function module EXIT_SAPLV01Z_004.
    i've created a project in Tr. CMOD and have assigned this exit. also i've created the include given inside the function module. i've activated all.
    But while i set a breakpoint there and try executing the transaction, the transaction doesnot stop at the specified break-point in debugger and hence the message doesnot get fired.
    Plz help as to why the exit is not fired and why it doesnot stop in the debugger.

    try this XMRM0001 enhance ment in smod for mfbf.
    NB : activate all the things.
    regards
    shiba dutta

  • User Exit for IW32 accessrights check on fields

    Hello,
    i need to implement a check that enables me to block the access on a column within the table (transaction IW32) at the objects-tab for users of a specific role.
    That check could be done by showing an error message once the user presses SAVE or by blocking the input in that table. I checked the Userexit EXIT_SAPLCOIH_009  but that one only allows a check on the header data not on the data of the objects-tab.
    I hadnt found any other user exit that could do the trick. Is that only possible by SAP-code manipulation ?
    Could somebody help me out here ?
    Thanks and best regards,
    oliver

    Hello and thank you very much for the answers.
    Pete, i checked the BADI IWO1_SCREEN_MODIFY but im unsure if that would work because it only hides fields and doesnt allow to disable input. Another problem is that the screen-loop only runs over the input-fields above the tab and the table. (like Order, Sys. Status etc)
    But i need to modify the table itself. Any idea how i can access the table on the tab here ? I normally use ALVs so the question is too if the screen-loop even run over such old-styled-tables usually. Cant say that 100% but i thought it would. For me it looks it doesnt actually :/
    The loop-screen runs only over the elements of dynpro 1108 and not 0300 which contains the table.
    Any idea ?
    thanks again, your help is highly appreciated.
    oliver
    Edited by: Oliver Neumann on Jan 29, 2009 10:25 AM

Maybe you are looking for