Check list for automatic accounting document creation

Sir,
I have created a new depot [ STO process ]
After that I tested SOP in development server, and could successfully create sales order, delivery, billing, accounting document.
Accounting document was automatically created at the time of VF01.
But in production server, after billing document, I have to manually release the document for accounting.
I checked following conditions.
1] " Posting block" is unchecked in billing document type
2] Account Assignment is maintianed in VKOA
3] Account Assgn Grp is maintained in customer master and material master.
What could be possible reason, why accounting document does not generate automatically. For all previous depots created it is generated automatically in production.
Would appreciate reply
Regards
Trupti

Dear,
        I think you do the check mark on posting block. I have check this scenario and it is work.
        In STO process, There is no requirement to create accounting document because STO is process of company inter transfer process. and in this scenario, accounting document should not be generated and invoice create as a perform invoice.
       Hope will help.
Regards,
Sandip

Similar Messages

Function module to find the attachment list for an accounting document?

Is there a function module to find the attachment list for an accounting document? Or which table stores such references?
I know I can find this info from the transaction FB03, but is there a function module to find the attachments for an accounting document? So far I only found the attachments are stored in the table SOOD, and archived documents in table TOA03, but I can't find the table that stores the links between the accounting document and its attachments?
<b><REMOVED BY MODERATOR></b>
Thanks,
Ning
Message was edited by:
        Alvaro Tejada Galindo

Hi,
i_object1-typeid = 'YARSATTA'. "<<< Give your Object id name
i_object1-catid = 'BO'.
i_object1-instid = i_yarsitem-docno.    "<<<< Document Number
call method cl_gos_attachment_query=>count_for_object
    exporting
     is_object = i_object1
     ip_arl    = space
    receiving
     rt_stat   = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
     move wa_stat1-counter to v_attno1.
endif.
For link you need to check for table SRGBTBREL
and also please check class CL_GOS*
a®

Manual creation of idoc for a Accounting document FIDCC1

Hi,
Some of the config for the change pointer was not moved to production and some accounting documents have been created which have not triggered the IDOC.
Is there a way to create the idoc for the accounting documents already created.
Regards,
Puneet.

Once you have all your change pointers setup correctly (view bd52) then you should be good to go BUT to answer your question about the existing documents .. you would need to somehow "touch" those documents to trigger the creation of the IDOCs. You can modify something on then that also is attached to the change pointer say a date? 1/11/11 change to 1/12/11 but don't save that value .. change back to 1/11/11 then save.
Just my thoughts .. let me know how it goes.
Jay Esparza

What is the user exit for automatic account determination in PO

Hi Experts
I ned to know what is the user exit for automatic account determination in PO
my client needs the document type to defines Account Assignment Category.
choosen a document type Account Assignment Category is defined automatically. you can't choose
a wrong Account Assignment Category from the drop down list.
thanks form you help.

If this is the case than why don't you use the Transaction variant
SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
The exact solution for your problem is as follows
Go to Tcode SHD0 and enter the transaction variant
In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
Once you finish system will save this one as a variant
Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
W content and output only for your case the field XXXXXXXX should be selected for W content and output only
Make sure you have value 1 in contents field
If not then restart the variant again and on the ME21Nscreen reselect the invoice field
Later exit and save (save in the object which you can transport)
Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

Check list for Customization of FI module

SAP Guru's
Can any one guide me for Steps/check list for customisation of FI module
and how to document it.
Sandeep

Hi,
In SAP, there are quite a few configuration steps which are required in each and every FI implementation. However, it will be different in each client, depending upon several factors like Business Processes / requirements of the client / what modules are being implemented / what interfaces are to be maintained etc.
Similarly, if FI module alone is implemented it will be simple, but if FI and CO are implemented, it will be complex. Hence, I suggest first understand the requirements in a broad manner and based on that you can arrive on what configuration needs to be done.
Also note that SAP standard configuration will already exist and you can copy most of the settings to your Company Code(s).
At the high level, Organization structure has to be created based on Business requirements like Company Codes, Credit Control Area, Controlling Area, Operating Concern, Sales Organization, Division, Plant etc.
Some of the specific configuration steps in FI are creation of Chart of Accounts, Document types, Field Status variant, Account Groups for Customer / Vendors etc. This is not exhaustive and you can look at IMG to identify the different config steps required for your client.
Thanks
Murali.

Check list for testing

Hello everyone,
I am trying to put a document together to have a check list for integration testing. does anybody have anything like this that can share? Or any tips of what steps should be taken in consideration to complete integration testing?
Thank you for your help!

Hi,
1) Integration testing validate end to end business scenarios including interfaces. Use converted data (if applicable and based on the data strategy). Can be executed in multiple cycles based on the implementation strategy
2) Scenario-based testing across process areas
May include multiple t-codes, or equivalent units in a string or sequence
3) Testing across modules
4) Primarily deals with cross-application chains that directly or potentially impact each other
5) Consists mostly of positive testing with selected negative testing
6) Executed in the Quality Assurance test environment
7) Integration Testing will be performed in multiple cycles
8) Next cycle should not begin if critical discrepancies have not been dispositioned. All Integration test discrepancies must be closed by the end of the last integration test cycle
9) A discrepancy can be dispositioned if:
Retest Passes or
Workaround approved or
Alternate resolution approved
Regards
R. Senthil Mareeswaran.

Check list for creating a cost element?

Hi,
Who can provide a check list for creating a cost element?
Thank you.
Kind regards,
Linda

Hi,
Cost Elements are broadly of two categories - Primary and Secondary cost elements.
In case of primary cost element a GL Account should have been created and in case of secondary cost no corresponding GL account should exist. Secondary Cost Elements are used only in Controlling Module. The transaction codes are:
KA01 - Create Primary Cost Element.
KA06 - Create Secondary Cost Element.
KA02 - Change Cost Element
KA03 - Display Cost Element
KA04 - Delete Cost Element
KA05 - Display Changes
Once transaction data is posted Cost Element cannot be deleted.
Another point in Cost Elements is defining the Cost Element category. Cost Element category determines which Cost Element category can be used for which Business Purpose. For example cost element category 1 is used for primary costs and 11 is used for revenues.
In the default account assignment tab, we can define a cost center / internal order and always the postings for that cost element will be posted to that cost object.
Thanks
Murali.

Go live check list for HCM & ESS/MSS

Hi,
Can anybody send me some document of go-live check list for SAP HCM and EP (ESS/MSS).
My email is [email protected]
Thanks a lot in advance
Regards.
Saï

Hi,
If you have the check list of SAP HCM then could you please send across on [email protected]
Thanks&regards,
pradeep

Check List for Performance and tuning

Hello Experts,
can anyone send me a document for BW performance and tuning
1. step by step guide for solving the performance issues
or
2. check list for performance

Our book on BW performance tuning has a detailed explanation and recommendations regarding step by step process of how to do the performance tuning as you have desired.
Pl. refer to the following link to know about the book.
http://www.amazon.com/SAP-Performance-Tuning-Shreekant-Shiralkar/dp/0977725146/ref=sr_1_1?ie=UTF8&s=books&qid=1196767811&sr=1-1.
You will notice that the book has screen shots and detailed theory on aspects like indexes like B Tree Index or Bitmap Index to help you identify and improve perfromance of your BW system.
Thanking you in advance for sharing your feedback on the book and its "reference" value for your work.
Shreekant

Open Item Management Check box for GL Account

Hi,
I need to activate Open Item Management check box for one GL Account. But it is not accepting since few postings were there in that GL Account.
Kindly help me how to activate Open Item Management Check box for GL Account.
Thanks
KB
Moderator: Please, search SDN before posting; this question has been answered dozens of times

Hi,
Check the below link. It might be useful for you.
Open item management status change
regards,
Radhika.

DMBE2(LC2 amount for a accounting document) in BW

Hello Friends,
The users have a requirement to display the LC2 amount for an accounting document along with LC1 and LC3 amounts. Now the problem I am facing is that the LC2amount is postive for both the actual debt and payments made against the debt amount. Now in the subtotal for a particular customer for that account is adding to the original debt value instead of subtracting as all the LC2 amount values are positive.
Now, the LC2 amount is mapped to DMBE2(LC2 amount for a accounting document) in SAP R3.It is stored in BSAD,BSIS and BSEG tables and its value is positive in those tables too.
I don't understand why LC2 is positive for both the debt and payment amounts. But LC1 and Lc3 have both positive and negative amounts.
Also, is this the standard SAP design or custom to a client.
How do I resolve this and provide the correct LC2 balance in the reports.
Regards,
Tanya

Hi Tanya,
Do you have a characteristic in the provider(Something like document type) which tell you whether the current record is debt or payment.
If you do have such a characterisic, then you can create a formula with an if condition -multiply LC2 by -1 if it is a debt.
Regards,
Sunmit.

Check List for TTE Basic Settings

HELLO guys..
Can anybody send the check list for TTE Basic settings
Thanks in advance
Regards
vamshi

Yes I have. At this point, that's all I have. I can't change any settings via Computer since the computer doesn't seem to know that the AX exists.
Any other ideas?

Document Summarization for External Accounting Documents - ECC 6.00

Hi All,
I would like to know about the Document Summarization for external accounting documents in controlling. please can anyone suggest when we have to use this in ECC 6.00.
Regards,
Pranav

Hi,
Please see note 1070629 - FAQs: New General Ledger Migration
https://websmp204.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1070629&_NLANG=E
Extract :
77. How can I deactivate classic Profit Center Accounting (EC-PCA) after activating the new General Ledger?
Note 702854 explains how to deactivate classic Profit Center Accounting.
If you use document splitting for profit centers in ERP2004, delete the dummy profit center from the table TKA01 also. For this purpose, Note 702854 provides the program Z30PCA23. Use the program Z30PCA23 to delete the dummy profit center of classic Profit Center Accounting in the controlling area.
Hope this helps.
Cheers,
Gimmo

Check List for Functional Upgrade from 4.7 to ECC 6.0

Hi Gurus,
Cany anybody tell me what is the check list for SAP SD Functional Upgrade from 4.7 to ECC 6.0.?
My Email : [email protected]
Points for sure for useful answer
Venkat
Edited by: Venkat Goteti on Feb 4, 2008 5:34 AM

If it is possible can you send me file to [email protected]

I need the check list for SOLMAN implementation

Hi gurus ,
i need the check list for solution manager implementation and what are the things to be discuss with the client , i am new to SOLMAN, i have to do this by the evening , any one can help me out
Cheers
Gopal.rao

Hi Gopal,
I am not sure if this thread of yours is in continuation of the other thread you have started which has been replied by two other Forum members.
The checklist depends upon which Scenario(s) of SolMan you are trying to implement.
- Implementation/ Upgrade of ERP systems
- Service Desk
- Change Request Monitoring
- Diagnostics
- Solution Monitoring (includes BPM/ Interface monitoring)
- Delivery of SAP Services (EWA, .....)
Unless you specify the scenario you are seeking information on, it is difficult for anyone to pose a satisfactory reply.
Best regards,
Srini

Check list for automatic accounting document creation

Similar Messages

Maybe you are looking for