Check new user SB and pureupload ASP user

Hello,
ASP
I was wondering has any one used the dw SB "Check New
Username" with
pureupload.
I have a form with a textfield and a file field. I want my
user to add an
image and an SKU. I want to be sure the sku is unique, I want
to use the
"Check New Username" but I cannot seem to get it to work.
I am calling the vairable like this in my check new user
query
UploadFormRequest("picrefsku")
if any one has done this before or can add any input am
grateful
regards
k

this is the code for the check new user
this UploadFormRequest("ininbutt") is rfom the form button,
when the form is
submitted then this should be finred, but its not the case.
<%
' *** Redirect if username exists
MM_flag = UploadFormRequest("ininbutt")
If (CStr(Request(MM_flag)) <> "") Then
Dim MM_rsKey
Dim MM_rsKey_cmd
MM_dupKeyRedirect = "ffff.asp"
MM_dupKeyUsernameValue = CStr(Request.Form("ggg"))
Set MM_rsKey_cmd = Server.CreateObject ("ADODB.Command")
MM_rsKey_cmd.ActiveConnection = MM_connpeepeek_STRING
MM_rsKey_cmd.CommandText = "SELECT imagesku FROM
piddle.ps_usr_image WHERE
imagessku = ?"
MM_rsKey_cmd.Prepared = true
MM_rsKey_cmd.Parameters.Append
MM_rsKey_cmd.CreateParameter("param1", 200,
1, 45, MM_dupKeyUsernameValue) ' adVarChar
Set MM_rsKey = MM_rsKey_cmd.Execute
If Not MM_rsKey.EOF Or Not MM_rsKey.BOF Then
' the username was found - can not add the requested
username
MM_qsChar = "?"
If (InStr(1, MM_dupKeyRedirect, "?") >= 1) Then MM_qsChar
= "&"
MM_dupKeyRedirect = MM_dupKeyRedirect & MM_qsChar &
"requsername=" &
MM_dupKeyUsernameValue
Response.Redirect(MM_dupKeyRedirect)
End If
MM_rsKey.Close
End If
%>

Similar Messages

  • The User portlet and the Portal User Profile portlet

    Im trying to create a sub administrator home page on version
    309, however the 'create user' portlet has been split into
    a 'create user' and a 'update user profile' portlet (as seen on
    the new default portal30 homepage).
    However the only portlet that seems to be available in the
    portlet list is 'update user profile' portlet.
    So how do I add the create user portlet to my homepage?

    I found the wwsec_api and wwsso_api_user_admin packages. I now know I can build my own user profile screen and use these APIs to add, update, and remove users.
    However, do I need to use the wwsec_person$ table, or can I create my own? Or can I add additional fields to the wwsec_person$ table? I have 7 additional pieces of information that need to be captured. I could just use some of the database fields in the table that we don't currently have use for, but then the name of the field will not accurately represent the contents of the data (i.e. store our "Organization" data in the "Department" field, our "DSN Phone Number" in the "Work Phone Number" field, etc.) and it would make for difficult maintenance.
    Can anyone offer suggestions as to how they implemented a customized User Profile, easily?

  • User name and Country from User master

    Hello Friends,
             I want the User name as per User master record and the Country.  I have USR03 table. But in that  I have a fieldname BNAME.
    That is not the direct user name. Where can i get these both ( User name and Country ).
    Thanks,
    Ajay

    Hi,
    Try using function module to get the user names
    ALM_ME_READ_USER_STATUS
    PAR_EBPP_GET_USER_LOGIN_INFO
    BP_CENTRALPERSON_GET
    SUSR_USER_ADDRESS_READ
    Regards
    Ravi

  • User Groups and non Developers users

    Hi,
    two questions.
    1) How do I create users groups.
    I want to divide specific users to specific groups.
    2) I created users not as developer and not as a administrator.
    When I logged on with that users I didnt see any of the applications, why?
    Thanx.

    1. You asked "how do I assign users to that group and later attach the group..." I think your question is not about how to assign users to a group but rather how to attach the group... Use the function wwv_flow_fnd_user_api.user_in_group in an authorization scheme (desc wwv_flow_fnd_user_api). Attach the scheme to a region, button, etc. to control access. Please read about authorization schemes in the user guide and search this forum for "authorization" and "groups" for useful threads.
    2. A user account without development privilege will be useful for authenticating to an application you create. It will not be useful for developing any applications in the Application Builder.
    Scott

  • IMac AirPort first user working, second user not and add MacAir user

    I'm really struggling to get my Airport working properly i have two users on my iMac, only one is connected to the AirPort and therefore the Time Machine and also a MacAir that needs to be backed up on the Airport for first time and also synch Outlook for Mac archiving
    Be grateful of assistance.

    Hi Jeroen,
    Unfortunately you have discovered a bug.  Some suggestions:
    1. You can delete the problem collection and re-create it.  Please note that you will
    lose all data contained in the User Profile Disks, so if there is anything you need you should have each user log on and copy their data to some other safe location such as OneDrive, Dropbox, local client
    drive, etc.  For example, your users may have saved files in their Documents or other folder under their profile folder (C:\Users\<username>) and these will be lost if you delete the collection.
    2. Open an
    Azure Support ticket.  It may be possible for support to manually fix the issue you are having so that you do not need to recreate the collection.  You need to have at least the Developer plan to create a support ticket.
    3. Wait for someone from the RemoteApp team to read this thread and investigate the issue.
    In the future, until this issue has been resolved, I would advise you to always remove a user account from the RemoteApp user access tab before removing the account from Azure AD.
    Thanks.
    -TP

  • Export User Id and Passowords from User Administration

    Hi
    I have exported users from Dev to QA Portal. Users are successfully imported to QA, but when I tried to login with the DEV password I am unable to login.
    Do we have to manually change the password for each user id transported from DEV.
    Thanks
    Murthy

    Hi Murthy,
    Yes, you have to assign the initial PWD for all the user ID's. With eport you will get the roles, groups etc exported not the PWD.
    Thanks.
    Sushil

  • Hi i want to become  storng in user exit and bapi

    hi experts.,
    i want to become strong in the area of user exits and badi's .
    please send  me the documents for it ,
    Thanks in advance.
    Regards,
    Hitu

    Hi Hitu,
    Check these links..
    <u><b>Badi</b></u>http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
    http://support.sas.com/rnd/papers/sugi30/SAP.ppt
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
    http://members.aol.com/_ht_a/skarkada/sap/
    http://www.ct-software.com/reportpool_frame.htm
    http://www.saphelp.com/SAP_Technical.htm
    http://www.kabai.com/abaps/q.htm
    http://www.guidancetech.com/people/holland/sap/abap/
    http://www.planetsap.com/download_abap_programs.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
    http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
    <u><b>User-Exits</b></u>
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm
    Regards,
    Younus
    <b>Reward Helpful Answers:-)</b>

  • User Exits and VOFMs

    I am looking for a document that suggests coding practices and rules that should be followed in User Exits and VOFMs in SAP R/3. Like value the variable XKWERT with the desired value in Pricing Condition Formula VOFMs, or never read an SAP defined internal table into the header line. Things like that. Does any one know of such a document?

    Hi, this may help you.
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm
    VOFM is the transaction where you can maintain Requirement routines, which are assigned through cusomization.
    To create a routine you need access key & routine no. starts with "9".for ex. 901,902 etc.
    one important thing to note that even if you have some syntax errors inside your routine, it will get activated without errors. So, you need to do Main Program check before activation.
    Refer to SAP Note no : 327220,381348,156230.
    goto VOFM tcode for wrting the Routines
    from menu Requirements-> pricing
    You can create the pricing related routines here
    Use the Number from 900 only
    take the acess key and try to copy the existing routine and change the code to your requirement  and keep a break point and see
    Activate it before execution
    Reward If Helpfull.
    Regards Madhu.

  • New to Enhancements and Modifications in SAP ABAP

    Hi experts,
    Could anyone has a tutorials or ebooks on this topic? I need to learn more about this.. tnx in advance!!!

    Hi
    Enhancements and User Exits
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm
    ENHANCEMENT-POINT
    ENHANCEMENT-POINT can either be static (for example, additional data declaration) or dynamic (for example, additional coding).
    http://help.sap.com/saphelp_nw2004s/helpdata/en/56/ee9441026aae5fe10000000a1550b0/content.htm
    Refer the very useful links below:
    Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    Please check this blogs and wiki as well.
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
    Please check these weblog for more information and sample codes.
    /people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    Look at this articles:
    New Enhancement Framework
    Enhancement Framework
    Enhancement Framework - The New Way to Enhance Your ABAP Systems
    Switch Framework Demo
    Introduction to the Enhancement Framework
    To now more about BADi Implementation see:
    How To Define a New BAdI Within the Enhancement Framework
    How to implement a BAdI And How to Use a Filter
    Enhancement-Point is a part of the new enhancement framework. He is some lite reading.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    Please check this blogs .
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/thenewEnhancementFrameworkandthenewkernel-basedBAdI&
    Enhancement frame work is the new concept using which SAP allows you to change the existing programs
    See the following blogs that talk about the same in detail
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    Defines a position in an ABAP program as an enhancement option, at which one or more source code plug-ins can be inserted.
    Syntax
    ENHANCEMENT-POINT enh_id SPOTS spot1 spot2 ...
                      [STATIC]
                      [INCLUDE BOUND].
    Extras:
    1. ... STATIC
    2. ... INCLUDE BOUND
    Effect
    : This statement defines an explicit enhancement option at the current position in the program at which a source code enhancement can be made. In program generation, the source code plug-ins of the assigned enhancement implementation that are available in the current system and have a switch in the status stand-by or on, are inserted at this position.
    If the addition STATIC is not specified, the source code enhancement is dynamic. This means that in program execution, only those source code plug-ins are executed whose switch has the status on. If a source code plug-in does not have a switch assigned to it, it is handled in the same way as a plug-in with a switch in the status on.
    With enh_id, an ID must be specified directly for the enhancement option, which is unique in the current compilation unit without the addition INCLUDE BOUND, and with this addition, is unique in current Include program. At least one enhancement spot must be assigned to the enhancement option using the specification simple enhancement spots spot1, spot2, and so on.
    Within enhancements, one or more source code plug-ins can be created for one enhancement option. A source code plug-in is created by the assignment of an enhancement implementation in the Enhancement Builder. This automatically generates an empty source code plug-in with a unique ID, which is displayed underneath ENHANCEMENT-POINT in the Editor, where the actual enhancement can be implemented between ENHANCEMENT and ENDENHANCEMENT.
    A source code plug-in is assigned to only one enhancement option. Multiple source code plug-ins of one enhancement implementation and the source code plug-ins of multiple enhancement implementations can be assigned to one enhancement point.
    Notes
    : In the terminology of the enhancement concept, the statement ENHANCEMENT-POINT includes both the enhancement spot element definition and the enhancement spot invocation of the enhancement option.
    The statement ENHANCEMENT-POINT can either be entered directly or created by choosing Edit ? Enhancement operations ? Create enhancement in the Enhancement Builder. After the program has been saved or created using Edit ? Enhancement operations ? Create enhancement, the statement can only be deleted by choosing Edit ? Enhancement operations ? Delete enhancement.
    In addition to the enhancement options explicitly specified by ENHANCEMENT-POINT, ABAP programs also contain implicit enhancement points, which can also be enhanced using source code plug-ins.
    Addition 1
    ... STATIC
    Effect
    : The addition STATIC is used to define a static source code enhancement. In a static source code enhancement, all incorporated source code plug-ins are taken into account when the program is executed, including those whose switch is in the status stand-by.
    Note
    : The STATIC addition is intended for the enhancement of data declarations, while the statement ENHANCEMENT-POINT without the STATIC addition is designed for the enhancement of executable coding. When the statement is executed using Enhancements ? Create enhancement, the addition is set according to this selection.
    Addition 2
    ... INCLUDE BOUND
    Effect
    : This addition can be entered in Include programs. It links the source code enhancement to the current Include program. Each program that incorporates an Include program only includes the source code enhancements that are defined with this addition. Source code enhancements created using the INCLUDE BOUND addition have their own namespace in each Include program. This ensures that if several Include programs are integrated into one compilation unit, no namespace conflicts arise, either between Include programs, or with the source code enhancements of the compilation unit.
    Without the addition INCLUDE BOUND, a source code enhancement is assigned to only one compilation unit. If the statement ENHANCEMENT-POINT is executed in an Include program without this addition, a compilation unit must be assigned to it in the Enhancement Builder.
    Note
    : In an Include program, Include-bound and non-Include-bound source code enhancements can not be defined at the same time. This also applies if an Include program incorporates other Include programs.
    Enhancement points are points provided by sap in standard programs to modify the source code. Go to any standard program, Locate the spiral button on the toolbar. Then press it and then navigate to edit->enhancement operations->display enhancement point menu. Then a no of yellow lines would appear, which are the available en points. You would have to change it and write the applicable source code.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/2342e1f3-0b01-0010-a186-fdd404884050 [original link is broken]
    Please try the link given below
    http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    Regards
    Anji

  • How can i use exisitng user data(Id, password) for user mapping

    Hi All,
    For User mapping , we can import user mapping data for many users from user administration. and for each user
    we can maintain mapping data in the standard format.
    eg:
    [User]
    uid=user2
    $usermapping$:BCE:user=ext_user2
    $usermapping$:BCE:mappedpassword=password
    i am clear till this point.
    this all works if we know the userid and passowrd on the system 'BCE'.the passwords on the system 'BCE', are encrypted . so there is no chance for me to know the passwords.
    so how can i use the existed userid/passowrd on the system 'BCE' for the mapped user and mapped password on the portal while doing usermapping.
    Thanks in Advance,
    Lakshmi

    Hi,
    I think this should work.
    1. Setup SSO with SAP logon tickets first. How to do this is described many places, e.g. http://help.sap.com/saphelp_nw04/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
    This SSO will not work at first, because the username is different in the back-end system. So what you need to do is to get the back-end username into the ticket (don't need a password because that is done by the SAP logon ticket)
    2. Create a portal component which uses the usermanagement API to create a usermapping which only consists of the username and a blank password. You can do this manually I think if you have no reference system defined.
    IUserMappingService umap =(IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
    //this is the currently logged in user. You might another user
    IUserContext user = request.getUser();
    //Get the existing data (think it can be null)
    IUserMappingData userMapping=umap.getMappingData(systemAlias, user);
    HashMap map = new HashMap();
                             map.put(IUserMappingService.UMAP_KEY_USER, backEndUserName);
    //add blank password               map.put(IUserMappingService.UMAP_KEY_PASSWORD, "");
    //store the values                    userMapping.storeLogonData(map);
    Voila, this should allow you to do SSO using SAP logon tickets, but with another name that you use against the portal. I am uncertain if this will work if you have multiple usermappings in the sap logon ticket
    PS since the sap logon ticket is issued at logon time, you need to relogon to get the changes done by the code
    Regards
    Dagfinn

  • Push settings to AD users does not work / OD users works well

    Hi,
    I still have problems to push settings to users from Microsoft ActiveDirectory with Profile Manager. I can't see an error message...
    What I did so far:
    - Domain-Name (I can't rename): dudel.local
    - Mac mini with Mavericks 10.9 and Server 3.0.1, IP 172.30.200.1/16, norad.dudel.local
    - iMac with Mavericks 10.9, IP 172.30.220.19/16, a220019.dudel.local
    - 2 Windows DNS Server on server daedalus.dudel.local (172.30.200.9) and prometheus.dudel.local (172.30.200.15)
    - 3 Windows Domain Controller on server daedalus.dudel.local (172.30.200.9), prometheus.dudel.local (172.30.200.15) and aurora.dudel.local (172.30.200.16)
    - Windows Domain Controller daedalus.dudel.local (172.30.200.9) acts as ntp server
    - Opened and forwarded ports tcp/2195, tcp/2196, tcp/5223 and tcp/1640 to 172.30.200.1 (norad.dudel.local). Since the web interface of profile manager is only accessable from inside, I do not forward tcp/80 and tcp/443 from outside.
    Mac mini:
    1. After a clean install of Mavericks and Server 3, I set LocalHostName, ComputerName and HostName:
              scutil --set HostName norad.dudel.local
              scutil --set ComputerName norad.dudel.local
              scutil --set LocalHostName norad
    2. Set in preferrences date/time server to 172.30.200.9 (daedalus.dudel.local)
    3. With Server 3 I requested a APNS certificate
    4. Checked DNS A and PTR with "changeip -checkhostname". changeip reports "success, there is nothing to change".
    5. Activated/Setup OpenDirectory with the standard self-signed certificate in Server 3
    6. Activated Web Server in Server 3
    7. Configured Profile Manager (http://krypted.com/iphone/setting-up-profile-manager-in-lion-server/)
    8. Bound norad.dudel.local (172.30.200.1) to ActiveDirectory:
              dsconfigad -add dudel.local -username administrator -password secret
    9. Installed Workgroup Manager for Mavericks to set permission for users from ActiveDirectory (http://krypted.com/mac-security/integrating-mac-os-x-lion-servers-profile-manage r-with-active-directory/). After adding AD user 'marcus' to group com.apple.access_devicemanagement, I can add settings to the user with Profile Manager on https://norad.dudel.local/profilemanager
    For testing I set the magnifying effect for the dock.
    iMac:
    1. After a cleant install of Mavericks I set LocalHostName, ComputerName and HostName:
              scutil --set HostName norad.dudel.local
              scutil --set ComputerName norad.dudel.local
              scutil --set LocalHostName norad
    2. Set in preferrences date/time server to 172.30.200.9 (daedalus.dudel.local)
    3. Bound to OpenDirectory norad.dudel.local
    4. Bound norad.dudel.local (172.30.200.1) to ActiveDirectory:
              dsconfigad -add dudel.local -username administrator -password secret
    3. With the local user 'admin' I accessed https://norad.dudel.local/mydevices and installed the "Trust Profile for DUDEL" and then registered the device. In Profile Manager the device is there, after clicking to "Devices" on the left pane. The Device is associated to user 'admin'. I changed it, by clicking in Profile Manager on "Users/marcus" and then added the device with the plus-sign on the right pane.
    After logging in with user 'marcus' on the iMac, there is no setting pushed to the user. The setting I did is still "pending". Logging of and loggin in as user 'admin' makes it happen... the pending task is successful... But now, the setting to the Dock is now at the user 'admin' and not at user 'marcus'
    This only happens to AD users. I tried an OD user. All settings are applied successful to the specified OD user....
    What am I doing wrong?
    Kind regards,
    Marcus

    Yes, DNS is is fundamental for networks, even for Windows networks. The DNS is working well for the existing Windows network and there are no problems in distributing certificates etc.
    There are more than 150 users and 180 devices on the network without DNS problems.
    I don't know how to discover a DNS problem... Windows works well.
    DNS resolves fine... dig does it for "a" records and "ptr" records. nslookup resolves, too.
    When the problem is a faulty DNS, why does the usage of users/devices from OD work with Profile Manager?
    Renaming and/or migrating the ActiveDirectory is not possible. First, I want to be sure that there is a faulty DNS.
    The .local TLD is not optimal for Bonjour/mDNS but I can't believe that there is no workaround

  • Use resource user attributes while creating a user

    Hi All,
    I'm developing a resource adapter for our rescource, and need to input attribute to real create that user in the rescoure. by modify skeleton resource adapter I have no where to fonud the field to input attributes for my resorce user, but for ldap there is form in tab Attribute for ldap user create, how can I do same thing in my adapter?
    Thanks a lot,
    Alice
    Message was edited by:
    Alice_1234

    If you are creating PO in foreground, you dont have the option of giving user id.
    But if you create POs in background using a scheduled job, then when you are scheduling the job, you can overwrite the default user id and give the user id you want. In this case all the POs created by the job, will have the user id created by you.
    But if you have to create a PO through background job, you have to give the inputs to PO through some programs may be BDCs or LSMW.
    Reward if this helps. you

  • Check java on users PC and give message

    The following code has been written with Java 1.4 and works great, but if a user has Java 1.3 they get an error message and if a user has Java 1.2 nothing happens at all. Is there a way to check if the user is using a version older than 1.4 and if so pop up a message telling them they need to download a newer version of Java?
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.*;
    import java.util.List;
    import java.io.*;
    import java.util.*;
    import javax.xml.parsers.*;
    import javax.xml.transform.*;
    import javax.xml.transform.dom.*;
    import javax.xml.transform.stream.*;
    import org.w3c.dom.*;
    public class Sametime extends JFrame implements ActionListener {
        private int indentation = -1;
        JPanel panel = new JPanel();
        JTextArea jta = new JTextArea(
        //Instructions for user
        "For a successful buddy list migration do the following:\n"
        + "1. Save your current Sametime Buddy List to your PC.\n   "
        + "The default location should be: C:/Program Files/Lotus/Sametime Client.\n"
        + "  A. Open the Sametime Client.\n"
        + "  B. Click on People\n"
        + "  C. Click on Save List.\n"
        + "  D. Save as your first.last.dat\n"
        + "     Ex. john.doe.dat\n"
        + "NOTE: If you have AOL contacts in your Sametime buddy list they will not be migrated.\n");
        JButton browse = new JButton("Continue");
        JButton exit = new JButton("Exit");
        public Sametime() {
            super("Sametime Buddy List Migration");
            setSize(610, 245);
            Container c = this.getContentPane();
            c.add(panel);
            browse.addActionListener(this);
            exit.addActionListener(this);
            panel.add(jta);
            panel.add(browse);
            panel.add(exit);
            jta.setEditable(false);
            setLookAndFeel();
            setVisible(true);
            setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        } //end Sametime
        public class DATFilter extends javax.swing.filechooser.FileFilter {
            public boolean accept(File f) {
                //if it is a directory -- we want to show it so return true.
                if (f.isDirectory())
                    return true;
                String extension = getExtension(f);//get the extension of the file
                //check to see if the extension is equal to "dat"
                if ((extension.equals("dat")))
                    return true;
                //default -- fall through. False is return on all
                //occasions except:
                //a) the file is a directory
                //b) the file's extension is what we are looking for.
                return false;
            }//end accept
            public String getDescription() {
                return "dat files";
            }//end getDescription
             * Method to get the extension of the file, in lowercase
            private String getExtension(File f) {
                String s = f.getName();
                int i = s.lastIndexOf('.');
                if (i > 0 &&  i < s.length() - 1)
                    return s.substring(i+1).toLowerCase();
                return "";
            }//end getExtension
        }//end class DATFilter
        public void actionPerformed(ActionEvent e) {
            //Default Location for JFileChooser search
            String error = "The file selected is not a .dat file!\n"
            + "Please select your recently saved .dat file and try again.";
            JFileChooser fc = new JFileChooser("/Program Files/Lotus/Sametime Client");
            fc.setFileFilter(new DATFilter());
            fc.setFileSelectionMode( JFileChooser.FILES_ONLY);
            String user = System.getProperty("user.name");// finds who the current user is
            if (e.getSource() == browse) {
                int returnVal = fc.showSaveDialog(Sametime.this);
                if (returnVal == JFileChooser.APPROVE_OPTION) {
                    //if (fc.getSelectedFile().getName().equals(".dat")){
                    if (fc.getSelectedFile().getName().endsWith(".dat")){ // checks to see if selected file is .dat
                    }else{
                        JOptionPane.showMessageDialog(null, error, "Wrong File", JOptionPane.ERROR_MESSAGE);
                        return;
                    }//end else
                    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Documents and Settings/" + user +"/My Documents/OLCS/",// looks for directory for list
                        "contacts-list_migration.ctt"));
                    } catch (Exception exc) {
                        File f = new File("C:/Documents and Settings/" + user +"/My Documents/OLCS/");// setting directory for list if not there
                        boolean yes = true;
                        yes = f.mkdir();// creating directory
                        try {
                            String[] contactArray = parseDatFile(fc.getSelectedFile());
                            Document document = createXMLDocument(contactArray);
                            saveToXMLFile(
                            document,
                            new File(
                            "C:/Documents and Settings/" + user +"/My Documents/OLCS/",// used only if the directory didn't exist
                            "contacts-list_migration.ctt"));
                            //exc.printStackTrace();// not sure if this is needed?
                        } catch (Exception exc1) {
                            exc1.printStackTrace();
                        }//end inner catch
                    }// end catch
                }// end if
                if(returnVal==JFileChooser.CANCEL_OPTION){
                    String Warning = "You did not migrate your Sametime buddy list at this time.";
                    JOptionPane.showMessageDialog(null, Warning, "Migration Canceled", JOptionPane.WARNING_MESSAGE);
                    return;
                }else{
                    String thankyou = "Thank You for Migrating your Sametime buddy list to OLCS"
                    + "\nYour new OLCS buddy list has been saved to:"
                    + "\nC:/Documents and Settings/" + user +"/My Documents/OLCS"
                    + "\n as: Contact-List_migration.ctt"
                    + "\n\n To be able to use Contact-List_migration.ctt for Windows Messenger:"
                    + "\n1. Log into Windows Messenger."
                    + "\n2. Click on File"
                    + "\n3. Click on 'Import Contacts from a Saved File...'"
                    + "\n4. Open OLCS in My Documents"
                    + "\n5. Click on 'Contact-list_migration.ctt'"
                    + "\n6. Click Open to import the list."
                    + "\n   A window will pop up confirming that you want to add all of the contacts"
                    + "\n   Click 'yes'"
                    + "\n   Your buddy list is ready to be used.";
                    JOptionPane.showMessageDialog(null, thankyou, "Migration Completed", JOptionPane.INFORMATION_MESSAGE);//Change this when defualt directory is known.
                }//end if else statement
            } //end if
            System.exit( 0 );
            if (e.getSource() == exit) {
                System.exit( 0 );
            } //end if
        } //end actionPerformed
        String[] parseDatFile(File datFile)
        throws Exception    {
            List list = new ArrayList();
            BufferedReader br = new BufferedReader(new FileReader(datFile));
            String line;
            while ((line = br.readLine()) != null) {
                line = line.trim();
                if (line.indexOf("U") != 0)
                    continue;
                int p = line.indexOf("::");
                if (p == -1)
                    continue;
                line = line.substring(p + 2).trim();
                if (line.indexOf("AOL") == 0)
                    continue;
                p = line.indexOf(",");
                if (p != -1)
                    line = line.substring(0, p);
                line = line.trim() + "@mci.com";
                if (list.indexOf(line) == -1)
                    list.add(line);
            }//end while
            br.close();
            String[] contactArray = new String[list.size()];
            list.toArray(contactArray);
            return contactArray;
        }// end String
        // setting up the XML file
        Document createXMLDocument(String[] contactArray) throws Exception {
            DocumentBuilderFactory dBF = DocumentBuilderFactory.newInstance();
            DocumentBuilder builder = dBF.newDocumentBuilder();
            DOMImplementation domImpl = builder.getDOMImplementation();
            Document document = domImpl.createDocument(null, "messenger", null);
            Element root = document.getDocumentElement();
            Element svcElm = document.createElement("service");
            Element clElm = document.createElement("contactlist");
            svcElm.setAttribute("name", "Microsoft RTC Instant Messaging");
            svcElm.appendChild(clElm);
            root.appendChild(svcElm);
            for (int i = 0; i < contactArray.length; i++) {
                Element conElm = document.createElement("contact");
                Text conTxt = document.createTextNode(contactArray);
    conElm.appendChild(conTxt);
    clElm.appendChild(conElm);
    }//end for
    return document;
    }// end Document
    void saveToXMLFile(Document document, File xmlFile) throws Exception {
    OutputStream os =
    new BufferedOutputStream(new FileOutputStream(xmlFile));
    TransformerFactory tFactory = TransformerFactory.newInstance();
    Transformer transformer = tFactory.newTransformer();
    transformer.setOutputProperty(OutputKeys.INDENT, "yes");//puts information on seperate lines
    transformer.setOutputProperty(OutputKeys.METHOD, "xml");
    transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "2");//gives the XML file indentation
    transformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no");
    DOMSource source = new DOMSource(document);
    StreamResult result = new StreamResult(os);
    transformer.transform(source, result);
    os.close();
    }//end saveToXMLFile
    public static void main(String[] args) {
    Sametime st = new Sametime();
    ImageIcon picIcon = new ImageIcon(st.getClass().getResource("/ST_Migration/images/mci.gif"));//Change when default is known!
    st.setIconImage(picIcon.getImage());
    } //end main
    private void setLookAndFeel() {
    try {
    UIManager.setLookAndFeel(
    UIManager.getSystemLookAndFeelClassName());
    SwingUtilities.updateComponentTreeUI(this);
    } catch (Exception e) {
    System.err.println("Could not use Look and Feel: " + e);
    } //end catch
    } //end void setLookAndFeel
    } //end public class Sametime

    Well, if you don't want to use Package.isCompatibleWith and the version numbers will always be of the form x.y where y is at most one digit, you can use Double.parseDouble() and then compare the numbers. Otherwise you need to write a method of your own.

  • How do I create a new user account and migrate my data to it?

    I have problem with Adobe Bridge crashing when I exit Camera Raw.  I was advised by my local apple service store to create a new user account and test Bridge using the new account.  It works fine.  So what do I do now?  I don't know what in my account is causing the conflict but assume that the solution might be e newly setup user. 

    Checking the behaviour in another user account is a TEST, not a solution! You don't need to move everything over. Otherwise, every time you get a user account problem, you'll keep moving to a new user account again and again.
    If the problem does not occur in a new user account, then the cause is something IN your user account. This is usually a Preference file. Adobe Bridge seems to crash a lot, and it can usually be fixed by deleting the Bridge folder in <user>/Library/Application Support/Adobe/
    You can also try deleting the Bridge preference file, which will be in <user>/Library/Preferences, and called com.adobe.bridge5.plist (or similar).
    If that doesn't work, you can test removing a whole bunch of the various Adobe files in those folders. You can always put them back if they don't change anything. And you've got a backup, haven't you? ;-)

  • HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

    I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

    i had the same problem before using a fresh install of Windows 8.1.  I have resolved this issue by running the program compatibility wizard.  This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter.  When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
    After that, it tired to resolve the issue, and provided the necessary settings to run iTunes.  Now it's running flawlessly.  I have Avast anti-virus installed though.
    HTH!

Maybe you are looking for

  • Not able to read DVD in the optical drive, but able to read CD

    So lately, my MBP's optical drive have been acting up weirdly when I put in a DVD disk. It would suck it in, and I would hear the sound that it tries to put the read head on the disk but failing. After a while it just spit the disk out. This would on

  • 910 application authorization failure blackberry

    hi all im new to here and looking for some help i have just got a sceond hand bb and it dint have appworld on it so when i tryed to download it it came up with this 910 application authorization failure and am not sure y can anybody help me out thank

  • Why can I not open System Preferences?

    My System Preference is frozen and I cannot open it.

  • Loading data into two files

    Hi I have written sql loader script for loading data into two tables. Script is working ..But output is not coming properly. I want to load data into first table which lines are having first char 'R'. In the second table I have to load data which are

  • Questions about the keyboard

    Hi all, I have set up a Hungarian keyboard in Settings > Keyboard > International keyboard, but I still get the default English keyboard when I write something. What have I done wrong? Another question, most of the time the keyboard switches between