Checkbox to active calculation

New to JavaScript. Need some help please. “A” is a checkbox, “B” is a field I will fill out (will be a number); “C” should equal “B” times 5% only if “A” is checked. Otherwise it should be blank. Thank you.

You can use the sumif() function like:
Set the first row to be a header and the add a footer row:
to sum item prices where a checkbox is checked use the formula:
C10=SUMIF(A, TRUE, C)
I hope this helps

Similar Messages

Error in activating Calculation view

Hi Gurus,
Please help me in resolving this issue below as I get an error when activating calculation view.
Internal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Unable to create hierarchy view: CREATE COLUMN VIEW
SQL: transaction rolled back by an internal error: identifier is too long: the identifer
description" is too long. Maximum length is 127:
I have checked all content related to this error but not able to find a solution.
Please advise

Though your calc view name could be small, the 'fully qualified' calculation view name could be bigger than 127 character.
Fully Qualified name = <packagename.packagename.packagename.....>/<calc view name>
For each calc view that you activate, HANA internally creates more than one column views (based on your attributes) which are found under the _SYS_BIC schema and there it will fail if the column view name is exceeding 127 characters.
Solution: make sure the fully qualified name is not too big
Regards,
Sesh

Set a default value to checkbox on Active Directory form

Hi all
how to set a default value to checkbox UD_ADUSER_MUST on Active Directory form?
I set the value 1 on the column default value (ADUSER form), i try the provisioning resource AD to the user and this field is not selected.
please help me.

hi
My problem is solved, I tried to change the default form ADUSER, but this value was overridden by the policy form.
I set this value in the policy form.
thanks

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

Is it possible to use checkbox to active cell/row?

I´m making a spreadsheet where is multiple values and I´d like to use a checkbox to activate/deactivate some cells. Is it possible in Numbers and how or should I try it in other way? The spreadsheet is going to customer and it is easiest way to choose what they want just only marking the right checkbox.

You can use the sumif() function like:
Set the first row to be a header and the add a footer row:
to sum item prices where a checkbox is checked use the formula:
C10=SUMIF(A, TRUE, C)
I hope this helps

When a checkbox is activated I want it to make the following textbox mandatory

If a checkbox is marked, I want the following textbox to be mandatory to fill in. My form has several checkboxes where one or more can be choosen.

Yes, that's possible too, but I thought you wanted to do that when the file is saved...
So to show an error message when the check-box is ticked you can use something like this as its mouse up action (of course, adjust the name of the text field so that it matches the one in your file): if (event.target.value!="Off" && this.getField("Text1").value=="")
app.alert("Enter your message here.",3);

Populate other fields when checkbox is activated....

I have seen several threads in regards to copying the Billing Address to use as the shipping address through the use of scripting. My project is to have a form the creates an quick invoice, in which the client clicks a check box for product(s)/services they would potential want. When a check box is selected the "cost" will be displayed in another field. So let's say:
Product A = $300
I want the form to display $300 in another box when the client puts a check in the box next to "Product A"
Can anyone help a newbie?
thanks

You will have to add a custom JavaScript action to the "Mouse Up' action for the check box. This action will have to take into consideration the box being checked and unchecked. The Acrobat User's Community, http://www.acrobatusers.com/ , has a number of tutorials and eSeminars on demand that cover creating forms and JavaScript in forms.

ACTUAL ACTIVITY RATE CALCULATION

Hi Gurus,
Is it possible to calaculate actual activity rate based on plan hours......
I know that we can splitt the actual cost based on plan hours by selecting splitting rule 22...
Now im doing actul activity rate calculation through ksii...
Then system considering actul hours confirmed in production for actual activity calculation.....
Pls suggest me.
RAM

Thank you for prompt reply.
Suppose this month we have produced only . 10 finished products.... But actual capacity is 20..... What ever cost moniterd by the production cost centers will be loaded on total 10 products only at the time of revaluation of production orders if we calaculate actul activity rate based on actual hours....... so the cost of the product is getting increased... so that he want to calculate actual rate aslo with planned hours..... Is there any other solution for this..
Pls suggest me ...... its very urgent.
Ram

BAdi: Meaning of "active not switchable through custom" ?

Looking at a BAdI implementation on the tab named "Enh. Implementtation Elements" of se18, there is a checkbox labelled "active not switchable through custom" . What exactly does this mean? And if I uncheck it, where in the IMG might I be able to customize BAdI activity?
I have observed that a BAdI implementation was active in one client (the one in which it was developed) and inactive in another one (the test client) when this box was unchecked. So it doesn't seem to have anything to do with having an active version of the code.
I'd also appreciate a pointer to documentation. SAP help wasn't much use to me.
-- Sebastian

Hi Bill,
if i may ask, does the column already referenced well?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1084935b-0367-4814-b4fc-390670806bd3/content-query-custom-fields-not-showing-up-even-after-following-all-the-steps-all-steps-listed?forum=sharepointdevelopmentprevious
http://msdn.microsoft.com/en-us/library/ms497457%28v=office.14%29.aspx
if possible please have a try to create some calculated columns that reference the InfoPath content type columns and used the calculated ones.
you may also try this codeplex, for testing ：
http://enhancedcqwp.codeplex.com/
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Math.round with checkbox for tax

I have a form that needs to calculate sales tax. If it ships to California, then tax is applied.
I have been attempting to cobble together a Boolean JavaScript in Acrobat v8 (on a Mac) using Math.round(). No luck, it always defaults to else. I have searched this forum, planetpdf, bought Padlova's Acrobat Forms book, and just have been stonewalled on this issue.
I have a series of items that SubTotal - ItemTotal.1, ItemTotal.2, ItemTotal.3 using the simplified Value is menu.
California tax is calculated with (Tax * SubTotal) * 0.0725, where Tax is a checkbox with a Mouseup value of 1. When the checkbox is active, the tax is added, otherwise the tax value is zero.
As near as I can tell looking at the State Board of Equalizations tax tables, Acrobats default rounding is displaying the correct amount of tax.
Is there any reason I shouldnt leave this as it stands, as opposed to more research into the correct syntax for Math.round() with a checkbox variable?

Interesting - but exactly the sort of thing a programmer hates. It
gives a huge table, but it doesn't give the exact rules needed to
actually write legal code.
There isn't a generic standard to use. In fact, in some states, the
rule changed. For example, in 2005, Ohio changed to "The computation
shall be carried out to three decimal places. If the result is a
fractional amount of a cent, the calculated tax shall be rounded to a
whole cent using a method that rounds up to the next cent whenever the
third decimal place is greater than four. A vendor may elect to
compute the tax due on a transaction on an item or an invoice basis."
Instead of "always rounding up in any case where the tax calculation
yielded any fractional amount over a whole cent".
But you say "rounds up". Let's test that with the table. $100 is a
good starting point. 7.75% of $100 is exactly $7.75, so no rounding is
needed. This matches the table, which says that amounts over $99.93
pay $7.75 tax. So, what about $99.93? Calculated exactly, 7.75% is
$7.744575. If this were simply rounded up, the tax would be $7.75.
This suggests it is actually rounded to the closest, and might be the
same as the new Ohio rule. Or some variation on it.
Interestingly, there is a California sales tax calculator on
http://www.csgnetwork.com/salestaxcalc.html, and it seems to match the
table. They do offer a JavaScript calculator for license, and given
that it runs to something like 60 lines of code, this may be worth
considering, as reimplementing it (without copying) sounds hard work.
Aandi Inston

Report with updateable checkbox

Here is what I want to do :
I have a report with a HTMLDB_ITEM.checkbox on a 'Y', 'N' field. I would like to be able to update that value by simply checking and unchecking my generated checkbox.
Example : select player_no, player_name, htmldb_item.checkbox(1,active,'N','Y') from players.
I would like to be able to uncheck the active checkbox and the field value for that player(using the player_no) would be updated to 'N' and vice versa when checking the box.
I had created a process that looped on my checkbox item like explained in the "how to", but only the check items were processed.
Then I tried adding the following to my select and looping on the second item, but both items do not follow each other. If I have 2 checkbox checked and 10 players, than the item 1(checkbox) has only 2 records compared to 10 for item 2(hidden player_no):
htmldb_item.checkbox(1,active,'N','Y')||htmldb_item.hidden(2,player_no)
Is my request feasible ?

Sorry, I used HTML tags to bold stuff, didn't realize that didn't work.
Sorry for the slow response, I have been swamped with work.
I am assuming everyone is using the htmldb_application.g_fxx(i) variables in PL/SQL processes when trying to process their checkboxes.
Here's an example that would be similar to Patrick's situation (above). This would be in the SQL for the report region:
htmldb_item.checkbox(1, player_no, decode(active, 'Y', 'CHECKED', null) || htmldb_item.hidden(2,player_no)
Let me explain why I'm doing this:
First: htmldb_item.checkbox(1, player_no, decode(active, 'Y', 'CHECKED', null) will create checkboxes. Rows with active = 'Y' would have a checked checkbox, but the value of the checkbox is the player_no. I would assume (and suggest) that player_no is a unique value for that record.
Second: htmldb_item.hidden(2,player_no) will be the item you wish to update. (I always make this the primary key or unique value, so I can update any data for that record, and it must be the same value as the checkbox value)
In the How To documents, they tell you to use this for processing checkboxes:
for i in 1..htmldb_application.g_f01.count
loop
--process here
end loop; where htmldb_application.g_f01 is your checkbox item.
I have noticed that it only counts the rows that have a checked checkbox. So if you have a report with 10 rows, and you've checked 2 checkboxes, the count for that item is only 2. Where as, the count for you hidden items is 10.
There are two ways I have made this process work, but here is probably the easiest way I would process all rows (rows with a checked checkbox and rows without the checkbox checked):
/*this will loop through every row of the report*/
for i in 1..htmldb_application.g_f02.count
loop
/*this will account for when they don't check any boxes*/
if htmldb_application.g_f01.count != 0
then
/*this will loop through the checked checkboxes*/
for k in 1..htmldb_application.g_f01.count
loop
/*this compares the values of player_no of the checkbox and hidden item*/
if htmldb_application.g_f01(k) = htmldb_application.g_f02(i)
then
--process where checkbox is checked
update xtable
set active = 'Y'
where player_no = htmldb_application.g_f02(i);
else
--process where checkbox is not checked
update xtable
set active = 'N'
where player_no = htmldb_application.g_f02(i);
end if;
end loop;
else
--same process where checkbox is not checked
update xtable
set active = 'N'
where player_no = htmldb_application.g_f02(i);
end if;
end loop;
Now I this is not exactly the same thing I have in my process, but this is extremely similar, so excuse any syntactical errors I have made.
Let me know if this helps. I realize when I post this, all the spacing I have to make the code easier to read is gone, so I would suggest spacing things in notepad for easier reading.
If you want to see how to use all the htmldb_item package items then you can be found them in the HTML DB documentation: https://cwisdb.cc.kuleuven.ac.be/ora10doc/appdev.101/b10992/mvl_api.htm#sthref1469

Check box for activating Page break for each subform in Binding is inactive

Hi,
I am designing a PO layout copying MEDRUCK_PO to a custom form.
I am facing a problem here, as the checkbox for "REPEAT SUBFORM FOR EACH DATA ITEM" in Binding Tab is inactive(display only mode). Also in Subform tab, checkbox for "ALLOW PAGE BREAKS WITHIN CONTENT" is in inactive mode.
I can see the same checkboxes are active in the standard Adobe form on my system.
Can you please help me understanding the issue with it?
Thanks,
Divya

Dear Friends,
I have got the solution from my technical lead for the below issue, I like to share this resolution with you all.
Best Regards,
Ravishekar.Thallapally
*&      Form after_line_output
      After line output event is handled via this form
      L_V_LINE : Capturing line value for page break.
FORM sub_after_line_output1 USING l_v_line TYPE slis_lineinfo."#EC CALLED
   DATA: l_v_int TYPE int1.
   IF l_v_line-sumindex IS NOT INITIAL .
     l_v_int = l_v_line-sumindex MOD 2 .
     IF l_v_line-subtot = 'X' AND l_v_int = 0.
     Write:/ sy-uline.
        NEW-PAGE.
       CLEAR:l_v_int.
     ENDIF.
   ENDIF.
ENDFORM.                    " after_line_output

Cumulative value calculation in script logic

Hi,
Assuming i have the following values:
Acc1, time1 = 2
Acc1, time2 = 10
Acc1, time3 = 20
Acc1, time4 = 30
What script logic can i write such that the end results are:
Acc2, time1 = 2
Acc2, time2 = 12
Acc2, time3 = 22
Acc2, time4 = 32
time1 could start from any month of the year, and the next month is always one month after the current month (i.e. if time1 = june, then time2 = july).
Basically the above calculation involves some sort of cumulative effect. I would like to have this cumulative amounts stored in the database, hence i don't want to rely on measures="ytd" in the report.
Cheers

Hi Raja,
You can get the daywise cumulative value for the user selected date range by creating a formula on the KF & turning on the 'Cumulated' checkbox in the 'Calculations' tab.
--Priya

Grand total on a Percentage calculation

Guys,
I have report where i am calculating % active and % inactive aircrafts for two different types. The data is as below
Columns : CustomerType Active Active % Inactive Inactive% Total
Data : COMMERCIAL 277 38.96 434 61.04 711
CORPORATE 4593 48.42 4892 51.58 9485
SUM : 4870 87.38 5326 112.62 10196
The Active% and Inactive% are calculations as below
Active % = ( Active/Total )*100 (i.e (277/711) * 100 = 38.96 and (4593/9485)*100 = 48.42 )
Inactive % = ( Inactive/Total )*100 (i.e (434/711)*100 = 61.04 and (4892/9485)*100 = 51.58 )
The sum is caculated by the Totals functinality in discoverer , the sum for Active 5 and Inactive % is being calculated incorrectly.
Is it possible to make discoverer to calculate the sum for Active % as ( 4870/10196 ) * 100 and for Inactive % as ( 5326/10196) * 100 ??
Please help.
thanks

Hi,
That is how the Discoverer totalling should work. Ensure that you are using SUM rather than CELL SUM. Also try including an aggregate function in your calculations, i.e. so that your active calculation is SUM(active) and your total is SUM(total) so that your Active % is (SUM(active)/SUM(total))*100
Rod West

Doubt in using html:checkbox in struts

Hi all,
In my jsp page i have 2 checkboxes name mandatory and active.
<html:checkbox property="mandatory" value="true"/>
<html:checkbox property="active" value="true"/>
Insertion of data works fine,and now my doubt is about the edit mode.
In edit mode,depending on th value of thethese fields wheteher 0 or 1,checkbox should be checked.how can it be done?
In th corresponding for,the properties I declared as boolean values.Also reset method is provided .
Anyone pls help.
thanks

It's rather nasty, but you could wrap all your strings in <html></html>. Even so you still have to use entities, but the
following displays what you want:JLabel lbl = new JLabel("<html><html></html></html>");

Checkbox to active calculation

Similar Messages

Maybe you are looking for