Checking error message using Exception ID

Hello,
How can I search the log files using an Exception ID? I can goto the NetWeaver administrator, and open the Logs and Traces screen. The log file is also getting displayed.
But how can I do a search on the Exception ID, so that I can find my error easily?
Thanks in advance,
PKS.

Hi Sachin
Login as admin into the portal and then paste this url in the same address bar
http://<server>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.admin.logviewer.default
Then look for defaulttrace file with the smallest size and search for the exception ID, give the filter as the last 2 days and click search. Look for your exception in your results page.
Hope it helps.
OJ

Similar Messages

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

Getting Error Message using Formatted Search

Hi,
I am using formatted search for validating a particular field, and that happens fine. Kindly let me know if I can also display error messages using the same formatted search.
If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
Thanks in advance.
Satish.

Hi Satish,
if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
1. Solution
You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
Example:
DECLARE @save AS ....
SET @save = $[xxxxx]
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
ELSE
SELECT $[xxxxx] -- no error - sustain valid data
END
2. Solution:
You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
END
May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
Good luck!
Frank Romeni

How to show error message using java.awt?

How to show error message using java.awt?
Which is the class corresponding to the JOptionPane?
Or I need to use Frame ?

No, JOptionPane is swing!
You would have to create your own frame, put your message in it, then show it.

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Error Message Using MRM_HEADER_CHECK

Hello All,
I need some help here in this BAdi to validate a field and issue an error message. Documentation clearly says that you can check header and item fields and issue error messages. But I couldn't get this done as I wanted...
I tried all these...
       MESSAGE w006(ZFI_MESSAGES) WITH 'ERROR' DISPLAY LIKE 'E' RAISING error.
       MESSAGE s006(ZFI_MESSAGES) WITH 'ERROR' DISPLAY LIKE 'E' RAISING error.
       MESSAGE e006(ZFI_MESSAGES) WITH 'ERROR' RAISING error.
       MESSAGE e006(ZFI_MESSAGES).
       CALL FUNCTION 'POPUP_TO_CONFIRM'
         EXPORTING
           titlebar      = 'test pop up'
           text_question = 'test miro: pls enter material group'
           text_button_1 = 'YES'
           text_button_2 = 'NO'
         IMPORTING
           answer        = lv_answer.
       IF lv_answer EQ 2.
         EXIT.
       ENDIF.
Message Type 'E' is locking the screen, that makes sense, but is there any other way to make this work?
What is the use of EXCEPTION 'ERROR'?. How do I make use of it? Do I need to create another exception class and use it here? Please somebody help me.
Thanks,
Shekar

Hi
Previous variant is not fully correct.
If field "source" is filled with space, standart removes this message before post.
Correct variant is:
   clear lt_errprot[].
   call function 'MRM_PROT_INIT'
            EXPORTING
             i_xall   = space
             i_source = 'Z' -- Clear messages with own type
        EXCEPTIONS
             OTHERS = 0.
if i_rbkpv-sgtxt eq space.
       clear ls_errprot.
       ls_errprot-msgty = 'E'.
       ls_errprot-msgid = 'ZSTM'.
       ls_errprot-msgno = '008'.
       ls_errprot-source = 'Z'. -- Use own type of the message
       append ls_errprot to lt_errprot.
endif.
if lines( lt_errprot ) gt 0.
       call function 'MRM_PROT_FILL'
         tables
           t_errprot = lt_errprot.
endif.

How to return error message using macro or others ways

Hi !
I need your help to find a technical solution.
We have an alv object with 2 parameters (a checkbox and a writable field which is for address mail.) When you push the button B1, the function module SX_INTERNET_ADDRESS_TO_NORMAL is called to verify the email address.
If I use the classic way to show the exceptions returned by the function module, the user can read the message but when he does an action on the program this dump. (The program has been killed.)
I am looking for a way to show the error message and the possibility to change the email address. I think that using a popup information would work but I do not find this way very nice. Can I use macro to have the message on the status? In positive case, could you explain me how to use it?
Thanks!

check the context in which the message statement is running, [here in sap library - message processing|http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaae335c111d1829f0000e829fbfe/frameset.htm], you will get the answer why!

Lost SMS Icon and get error message Uncaught exception Index 20 = 20

Dear All
I have lost my SMS Icon and looking at previous forums have carried out the following techniques which do not work
1. I have gone to Messages - Options - SmS & Email Inboxes - Seperate but this does not solve anything
Within this step i have switched off phone taken out battery etc...
2. I have gone to Applications - menu - "show all" but my SMS icon cannot be found
Just to note even when i go to Messages - View Folder - SMS Inbox .....i get the error message again
Uncaught exception Index 20 > = 20
Anyone able to help ? Would be greatly appreciated.
Thanks

You may have already figured out your fix - but yesterday I went thru the same thing with my son's phone. Overnight he lost his SMS & MMS Icon and was receiving Uncaught Exception Index 28 >= 28. I called Verizon Tech Support and was told there was a corrupt file in the calendar.
We backed up the phone using the Desktop Manager - performed a security wipe and restored his phone.
His phone is back up and running as it should be. Hope this helps.
Laura

Error message using Disk Utility

Okay, my System Preferences is not showing up, so I ran the Disk Utility and this is the error message I got:
Volume Macintosh HD was corrupt and needs to be repaired.
Error: This disk needs to be repaired...then use Disk Utility to repair the disk.
What do I do? Do I reinstall Mac OS X Snow Leopard or is this a whole other issue? Do I take it in to get checked out? Can I fix this without taking it in? HELP!

What you need to do is repair the disk using your install disk (after you make sure that you've backed up your important data or have a current Time Machine backup):
insert install disk and hold down C key while restarting
once booted from the install disk, go past the languages, and then up to Menu bar - Utilities. Open Disk Utility and run repair disk. If it says "repaired", you're done. If not, run it again until you get the repaired dialog. You can then restart from your internal disk, eject the install CD and you're all set.
If Disk Utility can't repair it, you'd need a more powerful application or it could be other things - we'll wait with that until after you've run the repair function.

Equium A60: I get error message using explorer.exe

Everytime I try to open an image file using Paint or Fax/Image viewer, or I try to drag a file into a folder I get the following error message:
"Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience"
The error report says:
"AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll
ModVer: 5.1.2600.2180 Offset: 000847a6"
Also I cannot open webpages that open in new IE windows. Norton Internet Security 2005 also would not open, but did claim to be active in the background.
Does anyone have any advice for me?
I've tried all the help for explorer.exe problems on helpwithwindows.com but nothing they suggested worked - such as spyware, malaware removal. I've run a few online virus checks - since Norton won't work I had to try the online scans.
The laptop was bought last year, and we've lost the recovery CDs - so if we need them, then where can we get replacements?
Many thanks,
Jonathan

Hi
Well, this sound like a OS software malfunction. It's possible that some registry entries or/and data files are corrupted and damage.
However, the best solution is to recover the OS.
The other possibility is to use the "system restore" tool of Win XP.
Then you can try to roll back the OS to the early point. But if it doesnt work so the new installation is needed.
regards

Populate Error Message using MB_MIGO_BADI

Hi Friends,
My requirement is whenever the user does a goods receipt using transaction "MIGO" I need to check whether the item selected has an indicator "Delivery Completed" at the PO level and if this indicator is set for this PO item I need to throw an Error message and should not allow the user to create a GR against that item. I have implemented the BADI "MB_MIGO_BADI" for this purpose and I am using the method "POST_DOCUMENT" to check the PO item and throw an error message, bu the issue is afterI throw an error message and when the user tries to exit from the transaction MIGO using the exit button, the system throws an short dump " Screen: Illegal message" because the program attempted to issue a " " message during "Exit Command" processing. In order to avoid this i tried the method "CHECK_ITEM" to populate the error message to application log, it works fine but I am not able to get the line item details inside this method. I even tried to import the line item details from the method "LINE_MODIFY" and then use it in "CHECK_ITEM" method, but the issue here is CHECK_ITEM is called only once for all the line item, ""LINE_MODIFY" was called every time i change the line item, so I was not able to use it. Can you please let me know if there is any other better way to achieve this.
As per the below weblog, this scenario is available as part of the standard in ECC Ehp4, but unfortunately we are on Ehp1.
Delivery Complete Indicator of PO and Goods Receipt

Dear Imran,
To achieve the best possible solution you have to use two methods of this BADI in combination with each other. These two methods are 'LINE_MODIFY' and 'CHECK_ITEM'.
The method 'LINE_MODIFY' will be called every time there is some activity on the MIGO screen. In this method you will have both the item line id and the item structure available in the interface. You will need to create a class attribute which is an internal table of a locally defined structure. The first field of this structure will be the line_item_id and the second will be the item structure itself. The first time when this method is called for a line item a new entry is inserted into this class level attribute. For each subsequent time this structure needs to be updated with the new values comparing the line item id.
The method 'CHECK_ITEM' will be called when you press the 'CHECK' or the 'POST' buttons. In this method based on the line item id the corresponding item structure will be obtained from the class level attribute. Using the data of the structure you can then perform your validations and populate the BAPIRET2_TAB parameter with the message details which will then be dispayed in the popup message box in MIGO.
Hope this helps.
Best regards,
Pradip

How to customize error message using oraus.msg file?

Hi,
Is there a way to modify the oracle error message (for example: instead of ORA-01481: invalid number.. we modify it to "hello ! use a valid format.." ), is it possible using the oraus.msg file if not is there a solution?
Many thanks

968420 wrote:
Hi Gauyav and Keith,
i thak you for your quick responses , but i want the customized message to be displayed wherever the oracle error appears (in oracle forms screens , sql tool requests, ) not only in pl/sql code,That is a really bad idea
{message:id=1007020}
It would render the database completely unsupportable by anyone, and based on the quality of exception handling that is generally seen on these forums would result in databases that simply don't work.
SQL> declare l_dummy number;
2 begin
3    select null into l_dummy from dual
4    where 0 = 1;
5 exception when others then
6    raise_application_error(-20666, 'It doesn''t work!');
7 end;
8 /
declare l_dummy number;
ERROR at line 1:
ORA-20666: It doesn't work!
ORA-06512: at line 6
as we've a lot of forms screens and it's not possible to modify all of them.These are strange kinds of forms that it is possible to create a lot of them but not possible to modify them.
Is there a solution for this?Fix the forms.

InitCVIRTE generates error message "Unhandled exception in "MyApp.exe": 0xC0000005: Access violation reading location 0x00000000."

Hi,
I have converted a LabWindows CVI project to Visual Studio 2005. When I start the application i debug mode I get the message "Unhandled exception at 0x685662ba in EE352-500V.exe: 0xC0000005: Access violation reading location 0x00000000."
It comes when the application calls: InitCVIRTE in this context:
int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpszCmdLine, int nCmdShow)
// Initialize LabWindows/CVI run-time library
if (InitCVIRTE (hInstance, 0, 0) == 0)
return -1; /* out of memory */
The debugger indicates that value of hInstance is 0x00400000 {unused=9460301}
Can someone give me a solution to this problem. I have done some search on the Web without success.
Thanks!

I think that exception might be coming from the data execution prevention service that is part of Win XP SP2. The OS thinks that you're somehow trying to execute in the data segment and kills the process. It's intended to catch worms and viruses.
You can turn this service off for non-Microsoft programs using the control panel.
Many pointer handling errors now report as this exception instead of as a memory violation exception. That looks like a null pointer derefence to me.
Menchar
Message Edited by menchar on 11-09-2007 07:12 PM

Stock check error message in serial numbers problem

Dear Experts,
In serial number profiles i did the stock check indicator to give an error message if there were incosistinces in stock data,
now this is the scenario:
after doing an external maintenance order and creating a PO with reference to the maintenance order PR, and also entering the specified serial number in the PO:
1) Goods Issuing: i used MB1B with movement type 541 and as the serial number already exist and not wrong so it didnt show any error messages and by checking the stock data in MMBE the material was in stock provided to vendor.
2) Goods Receipt: when using MB01 with movement type 101 and when entering the serial number of the material it gives an error message ALTHOUGH it is the same serial number issued and the same serial number in the PO
This is the error message :
Stock data of serial number G081 not suitable for movement
Message no. IO231
Diagnosis
The current stock information for the serial number G081 contradicts the stock information of the movement to be posted. The following stock information is valid for the document and the serial number: Batch Number Stock data Serial data C2
Only the first different field for the stock data/serial data is assigned. However, further data may also be inconsistent. To determine whether this is the case, you can start an analysis.
System Response
Two system responses are possible (set using Customizing): If the case of an error occurring, the assignment of the serial number to this posting procedure is not possible. In the case of a warning, you can, if necessary, transfer the notification.
Procedure
Assign a serial number which corresponds in your stock information to the stock data of the posting. You can display the serial numbers which can be used using Select serial numbers.
Any help is appreciated
Thanks in advance

Try with MB04 t-code.
And External Operation scenario is as follows:
External Operations will be defined in Maintenance Order with control key PM02. There price will be maintained. So based on that, PR will be created for the External operations. Convert to PO & do GR for operations. I guess, here we can't do any goods issue of material to sub-contractor.
The reason is that in Sub-contracting, issue item & receiving item should be different. It can't be same. But here in our case, material code & serial number are same.
So try this process.
Check the below link for External Processing.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/5b/ae48624b8611d182ba0000e829fbfe/frameset.htm

Checking error message using Exception ID

Similar Messages

Maybe you are looking for