Child table provisioning to SQL using DBAT

I have a Multivalued attribute named 'AuthzIds' coming from Sun LDAP thru target reconciliation. I wanted to provision this value to SQL's 'MyAuthz' table (Child of MyUser table) using GTC - DBAT.
USR table -> already provisioned to -> MyUser table
UD_AUTHZ table -> to be provisioned to -> MyAuthZ table.
How will I make this child table provisioning work ? Do I have to write any custom adapter ? I see a task 'Child Table UD_MYAUTHZ row inserted" task in SQL_GTC process, which uses a adpSQL_GTC adapter.
Thanks!
Kabi

After Create User User, you'll have to add one more task which will read the data from iplanet user form and add in Child Table using Form APIs.*
You are suggesting to add a dependent-task to GTC-Process's "create user" task. Is my understanding correct ?
If yes, this may not work for the following reason.
I assume GTC task 'create User' invoked when the use is created in SQL. In my use case, users are created in SQL thru auto provisioning during 'iPlanet trusted Recon'. The SQL child table 'MuAuthz' suppose to be provisioned with child data when I run 'iPlanet Target Recon' (not 'trusted Recon'). Because 'target Recon' brings the mutlivalue attribute AuthzId to iPlanet resource UD_AUTHZ table (already associated to OIM Users). I run the 'iPlanet Target Recon' separately after successful completion of 'trustes recon'. So create user may not be the appropriate place for adding this dependent task, since there will be no child data available to OIM user after 'trusted recon' .
Another question related to this. I see few tasks like "Child Table UD_MYAUTHZ row inserted/ updated/ deleted" in GTC process. What are these tasks used for ?

Similar Messages

Create Partition tables in PL/SQL using Execute Immediate

Hi
I have to create a partiton table in PL/SQL using Execute Immediate. I concat the necessary Create Table syntax into a variable and use Execute Immediate variable name. This gives a error ORA-00900: invalid SQL statement. However if i cut and paste the SQL statement from DBMS_OUTPUT, the table creation goes through without any problem.
What could be the issue. Has anyone face this before please.
I am using 10G DB

Thanks for your reply. It is a big code. I am pasting the part required.
v_sqlstmtout :='CREATE TABLE a_10(MYDATE DATE NOT NULL,ID NUMBER(14) NOT NULL)';
v_sqlstmtout := v_sqlstmtout || ' PARTITION BY RANGE (MYDATE) ';
v_sqlstmtout := v_sqlstmtout || 'SUBPARTITION BY HASH(id) ';
v_sqlstmtout := v_sqlstmtout || 'SUBPARTITION TEMPLATE(';
v_sqlstmtout := v_sqlstmtout || 'SUBPARTITION SP1,SUBPARTITION SP2) ';
v_sqlstmtout := v_sqlstmtout || '(PARTITION mth_dummy VALUES LESS THAN ';
v_sqlstmtout := v_sqlstmtout || '('||V_SQLSTMT3||')' || v_sqlstmt||')';
EXECUTE IMMEDIATE ''''||v_sqlstmtout||'''';
variables are substituted through data from different tables.
The output looks like the following
CREATE TABLE a_10(MYDATE DATE NOT NULL,ID NUMBER(14) NOT NULL)
PARTITION BY RANGE (mydate) SUBPARTITION BY HASH(id) SUBPARTITION
TEMPLATE(SUBPARTITION SP1,SUBPARTITION SP2) (PARTITION mth_dummy VALUES
LESS THAN ('01-MAY-2006'), PARTITION mth_JAN2007 VALUES LESS THAN
('01-FEB-2007'))
The above is the output from DBMS_OUTPUT. If i run this statement the table is created. Please help..

SQL Server 2012 Management Studio:In the Database, how to print out or export the old 3 dbo Tables that were created manually and they have a relationship for 1 Parent table and 2 Child tables?How to handle this relationship in creating a new XML Schema?

Hi all,
Long time ago, I manually created a Database (APGriMMRP) and 3 Tables (dbo.Table_1_XYcoordinates, dbo.Table_2_Soil, and dbo.Table_3_Water) in my SQL Server 2012 Management Studio (SSMS2012). The dbo.Table_1_XYcoordinates has the following columns: file_id,
Pt_ID, X, Y, Z, sample_id, Boring. The dbo.Table_2_Soil has the following columns: Boring, sample_date, sample_id, Unit, Arsenic, Chromium, Lead. The dbo.Table_3_Water has the following columns: Boring, sample_date, sample_id, Unit, Benzene, Ethylbenzene,
Pyrene. The dbo.Table_1_XYcoordinates is a Parent Table. The dbo.Table_2_Soil and the dbo.Table_3_Water are 2 Child Tables. The sample_id is key link for the relationship between the Parent Table and the Child Tables.
Problem #1) How can I print out or export these 3 dbo Tables?
Problem #2) If I right-click on the dbo Table, I see "Start PowerShell" and click on it. I get the following error messages: Warning: Failed to load the 'SQLAS' extension: An exception occurred in SMO while trying to manage a service.
--> Failed to retrieve data for this request. --> Invalid class. Warning: Could not obtain SQL Server Service information. An attemp to connect to WMI on 'NAB-WK-02657306' failed with the following error: An exception occurred in SMO while trying
to manage a service. --> Failed to retrieve data for this request. --> Invalid class. .... PS SQLSERVER:\SQL\NAB-WK-02657306\SQLEXPRESS\Databases\APGriMMRP\Table_1_XYcoordinates>   What causes this set of error messages? How can
I get this problem fixed in my PC that is an end user of the Windows 7 LAN System? Note: I don't have the regular version of Microsoft Visual Studio 2012 in my PC. I just have the Microsoft 2012 Shell (Integrated) program in my PC.
Problem #3: I plan to create an XML Schema Collection in the "APGriMMRP" database for the Parent Table and the Child Tables. How can I handle the relationship between the Parent Table and the Child Table in the XML Schema Collection?
Problem #4: I plan to extract some results/data from the Parent Table and the Child Table by using XQuery. What kind of JOIN (Left or Right JOIN) should I use in the XQuerying?
Please kindly help, answer my questions, and advise me how to resolve these 4 problems.
Thanks in advance,
Scott Chang

In the future, I would recommend you to post your questions one by one, and to the appropriate forum. Of your questions it is really only #3 that fits into this forum. (And that is the one I will not answer, because I have worked very little with XSD.)
1) Not sure what you mean with "print" or "export", but when you right-click a database, you can select Tasks from the context menu and in this submenu you find "Export data".
2) I don't know why you get that error, but any particular reason you want to run PowerShell?
4) If you have tables, you query them with SQL, not XQuery. XQuery is when you query XML documents, but left and right joins are SQL things. There are no joins in XQuery.
As for left/right join, notice that these two are equivalent:
SELECT ...
FROM   a LEFT JOIN b ON a.col = b.col
SELECT ...
FROM   b RIGHT JOIN a ON a.col = b.col
But please never use RIGHT JOIN - it gives me a headache!
There is nothing that says that you should use any of the other. In fact, if you are returning rows from parent and child, I would expect an inner join, unless you want to cater for parents without children.
Here is an example where you can study the different join types and how they behave:
CREATE TABLE apple (a int    NOT NULL PRIMARY KEY,
b varchar(23) NOT NULL)
INSERT apple(a, b)
   VALUES(1, 'Granny Smith'),
   (2, 'Gloster'),
   (4, 'Ingrid-Marie'),
   (5, 'Milenga')
CREATE TABLE orange(c int NOT NULL PRIMARY KEY,
d varchar(23) NOT NULL)
INSERT orange(c, d)
   VALUES(1, 'Agent'),
   (3, 'Netherlands'),
   (4, 'Revolution')
SELECT a, b, c, d
FROM   apple
CROSS JOIN orange
SELECT a, b, c, d
FROM   apple
INNER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
LEFT   OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
RIGHT OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
FULL OUTER JOIN orange ON apple.a = orange.c
go
DROP TABLE apple, orange
Erland Sommarskog, SQL Server MVP, [email protected]

Sql server partition parent table and reference not partition child table

Hi,
I have two tables in SQL Server 2008 R2, Parent and Child Table.
Parent has date time, and it is partitioned monthly, there is a Child table which just refer the Parent table using Foreign key relation.
is there any problem the non-partitioned child table referring to a partitioned parent table?
Thanks,
Areef

The tables will need to be offline for the operation. "Offline" here, means that you wrap the entire operation in a transaction. Ideally, this transaction would:
1) Drop the foreign key.
2) Use ALTER TABLE SWITCH to drop the old data.
3) Use ALTER PARTITION FUNCTION to drop the old empty partition.
4) Use ALTER PARTITION FUNCTION to add a new empty partition.
5) Reapply the foreign keys WITH CHECK.
All but the last operation are metadata-only operation (provided that you do them right). To perform the last operation, SQL Server must scan the child tbale and verify that all keys are present in the parent table. This can take some time for larger tables.
During the transaction, SQL Server holds Sch-M locks on the table, which means that are entirely inaccessible, even for queries running with NOLOCK.
You avoid this the scan by applying the fkey constraint WITH NOCHECK, but this can have impact on query plans, as SQL Server will not consider the constraint as trusted.
An alternative which should not be entirely dismissed is to use partitioned
views instead. With partitioned views, the foreign keys are not an issue, because each partition is a pair of tables, with its own local fkey.
As for the second question: it appears to be completely pointless to partition the parent, but not the child table. Or does the child table only have rows for a smaller set of the rows in the parent?
Erland Sommarskog, SQL Server MVP, [email protected]

Peovisioning multivalued attribute to a Detail table in SQL using GTC

I have a trusted recon set up from Sun LDAP to OIM followed by auto provisioning to SQL's "MyUser" table using GTC. This works fine so far.
Now the difficult part of the requirements. I have a multi-valued attribute called 'AppRoles' associated to User in Sun LDAP. I want to provision this attribute to SQL's "MyUserToRole" table (this is a detail table of Master "MyUser" table). What should be the best approach to do this task ?
Thanks!
Kabi

For Look-Up:
Once you run Trusted Recon, all your AppRoles are inserted into this look-up as different rows for different users. Use OIM API's for that. A basic structure could be like following:
Code - Decode
User01 - Role01,Role02
User02 - Role02,Role03,Roel04
User03 - Role08,Role12
This way all the roles are stored in this look-up. Bu the only issue with this could be the modification in the look up manually which could be tolerated as their are glitches with almost every solution implemented.
For UDF Field
Yes, their would be a limitation in the Text Area field and it is *200* characters. So if that is the case then you should go for Look-up which doesn't have such restrictions at-least for your requirement.

Integrating MS SQL 2005 using DBAT Connector 9102

Hi,
I am trying to integrate MS SQL 2005 using DBAT Connector 9102 using GTC. My OIM version is 9102. Though the table exist in MS SQL still it is not able to find it.
It is able to connect but throwing error that table "test" does not exist.
I also tried to connect with small java program to test the connectivity
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
 con = DriverManager.getConnection("jdbc:sqlserver://<IP>;instanceName=<instance>;portNumber=1433", "sa", "******");
 System.out.println("connect done");
 stmt = con.createStatement();
 ResultSet rset = stmt.executeQuery("SELECT * FROM test");
It is throwing following error
com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'test'.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:196)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(SQLServerStatement.java:1454)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(SQLServerStatement.java:786)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(SQLServerStatement.java:685)
at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4026)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1416)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:185)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:160)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQuery(SQLServerStatement.java:620)
at TestingDB.main(TestingDB.java:33)
I have also tired to put 1433 port in firewall exception list but same result.
Any suggestion how to fix this issue?
Regards,
Sajid

just try the appending the username in the sql query .., select * from sa.test
- Double check that the table exist in the same schema which your are connecting
Thanks
Suren

How to process each records in the derived table which i created using cte table using sql server

I want to process each row from the CTE table I created, how can I traverse from first row to second row and so on....
how to process each records in the derived table which i created using cte table using sql server

Ideally you would be doing a set based processing rather than traversing row by row as thats more efficient. To answer it specific to your scenario we may need more info. Can you explain with some sample data your exact requirement?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to use Temporary Table in PL-SQL

In MySQL there is no Temporary table concept.
So for intermediate calculation I have created a table as below
create table SequenceTempTable
SessionId VARCHAR(50),
Sequence VARCHAR(500),
CreatedDate DATE
) ENGINE=MEMORY;
Whenever I invoke a SP, I load the data into SequenceTempTable using Session Id as below
CREATE PROCEDURE `GetSequence`(
IN Start_Date VARCHAR(25),
IN End_Date VARCHAR(25)
BEGIN
SELECT UUID() INTO v_SessionId;
INSERT INTO SequenceTempTable values (v_SessionId,'1,2,5,3',now());
required code
DELETE FROM SequenceTempTable WHERE SessionId = v_SessionId;
COMMIT;
END;
i.e. I have created a table as temporary table (created once),
and load the data using Session Id and once session specific intermediate computation done,
I deleted the session specific data.
Could you give me examples of How to use Temporary table in PL-SQL code with respect to my above example.
Because I have gone through creating Temporary table but I stuck with use in PL-SQL. I mean to say Is there any need of creating table in advance before invoking SP.
And one more thing as in MySQL temp table I created which is using MEMORY engine i.e. this table will always be in MEMORY so there is no need of writing data on disk.
Regards
Sanjeev

Hi Sanjeev
Read about GTT here
http://www.oracle-base.com/articles/8i/TemporaryTables.php
GTT always contains just session specific data. \
In case you want to use the GTT in the same session again you can use option
ON COMMIT PRESERVE ROWS;
Or if it is used just once in the session use can use
ON COMMIT DELETE ROWS;
Do remember that for GTT the data of one session can not be accessed in other session.
Also you can go away with Delete from GTT if not used again in same session.
Regards
Arun

Perfomance Issue on Parent Child table SQL

I am having table a and child table b contains data and message .
both are linked with id column. how can i pick the latest message from b against id . how can we make fastest sql.
I tried with subquries but it is taking time and working slow.
When i checking the cost of the sql in plan it is showing more than which i am expecting
Edited by: SA123 on Jun 22, 2009 3:22 PM

Old Structure output
PLAN_TABLE_OUTPUT
| 0 | SELECT STATEMENT | | 194 | 149K|
591 (7)| 00:00:08 |
| 1 | SORT ORDER BY | | 194 | 149K|
591 (7)| 00:00:08 |
|* 2 | HASH JOIN | | 194 | 149K|
590 (7)| 00:00:08 |
|* 3 | HASH JOIN RIGHT OUTER | | 192 | 142K|
504 (8)| 00:00:07 |
PLAN_TABLE_OUTPUT
| 4 | VIEW | | 5 | 2535 |
288 (4)| 00:00:04 |
|* 5 | FILTER | | | |
| |
| 6 | HASH GROUP BY | | 5 | 570 |
288 (4)| 00:00:04 |
|* 7 | HASH JOIN | | 32116 | 3575K|
PLAN_TABLE_OUTPUT
283 (2)| 00:00:04 |
| 8 | TABLE ACCESS FULL | b | 31837 | 373K|
141 (2)| 00:00:02 |
| 9 | TABLE ACCESS FULL | b | 31837 | 3171K|
141 (2)| 00:00:02 |
| 10 | NESTED LOOPS | | 192 | 48768 |
216 (13)| 00:00:03 |
New Structure
PLAN_TABLE_OUTPUT
| 0 | SELECT STATEMENT | | 196 | 152K|
| 1108 (4)| 00:00:14 |
| 1 | SORT ORDER BY | | 196 | 152K|
| 1108 (4)| 00:00:14 |
|* 2 | HASH JOIN | | 196 | 152K|
| 1107 (4)| 00:00:14 |
|* 3 | HASH JOIN | | 193 | 145K|
| 1021 (4)| 00:00:13 |
PLAN_TABLE_OUTPUT
| 4 | NESTED LOOPS | | 192 | 48192 |
| 216 (13)| 00:00:03 |
|* 5 | HASH JOIN | | 3832 | 419K|
| 206 (11)| 00:00:03 |

How to use a Sybase table in Oracle SQL statement?

How to use a Sybase table in Oracle SQL statement?
Sybase version : 11.9.2.4
Oracle version : 10.2.05
Thanks.

user12088323 wrote:
How to use a Sybase table in Oracle SQL statement?
Sybase version : 11.9.2.4
Oracle version : 10.2.05
Thanks.Any Oracle client connected to the Oracle database can access Sybase data through the Database Gateway for Sybase (it requires an additional license) or the Database gateway for ODBC (it's free).
The Oracle client and the Oracle database can reside on different machines. The gateway accepts connections only from the Oracle database.
A connection to the gateway is established through a database link when it is first used in an Oracle session. In this context, a connection refers to the connection between the Oracle database and the gateway. The connection remains established until the Oracle session ends. Another session or user can access the same database link and get a distinct connection to the gateway and Sybase database.
Database links are active for the duration of a gateway session. If you want to close a database link during a session, you can do so with the ALTER SESSION statement.
To access the Sybase server, you must create a database link. A public database link is the most common of database links.
SQL> CREATE PUBLIC DATABASE LINK dblink CONNECT TO
2 "user" IDENTIFIED BY "password" USING 'tns_name_entry';
--dblink is the complete database link name.
--tns_name_entry specifies the Oracle Net connect descriptor specified in the tnsnames.ora file that identifies the gatewayAfter the database link is created you can verify the connection to the Sybase database, as follows:
SQL> SELECT * FROM DUAL@dblink;
Configuring Oracle Database Gateway for Sybase
{message:id=10649126}

Parent - child table issue wrt to count - SQL question

I have a scenario:
There are 2 tables (parent and child). lets say, case summary table and task level dimension table.
for every case id in case summary table, there would be multiple tasks in task level dim table with a flag indicator set to 1 for all tasks.
but while counting the number of cases active with flag indicator 1 (ofcourse when joining case summary table with task dimension table), for a case id only 1 instance of task needs to be accounted (even though it has more than one task , for counting active cases, the flag ind corresponding to a task in a case if set to 1 , then the case is considered active)..but while joining and taking count of case ids with flag indicator as 1, you get the count of every task row of a case which is incorrect logically. how to discard the rest of child records of a case in child table (task dimension table)?
I am not sure how to achieve this in sql query
Kindly help!
Case summary table
case id, busininess_unit, agent_name
1001, admin, Ram
1002, Finance, Sam
task table
case id, task_id,task_name, flag_indicator
1001, 1, 'New', 1
1001,2, 'Open',1
1001,3,'In progress',1
1002, 4, 'New', 1
(In fact task_id is not a big deal... even you can assume task id doesn't exist..only task name ... )
now my question... if my query should get the current active cases (ind=1); as per above it should essentially give 2... but my query gives me 4..you know the reason why.. but how do i get the correct count?
Thanks!

may be you need just this:
select count(distinct case_id) from task
where indicator = 1;
If this is not what you are looking for, please elaborate and tell us the expected output and rest of the details as mentioned in FAQ Re: 2. How do I ask a question on the forums?:

Managing statistics for object collections used as table types in SQL

Hi All,
Is there a way to manage statistics for collections used as table types in SQL.
Below is my test case
Oracle Version :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> Original Query :
SELECT
     9999,
     tbl_typ.FILE_ID,
     tf.FILE_NM ,
     tf.MIME_TYPE ,
     dbms_lob.getlength(tfd.FILE_DATA)
FROM
     TG_FILE tf,
     TG_FILE_DATA tfd,
          SELECT
          FROM
               TABLE
                    SELECT
                         CAST(TABLE_ESC_ATTACH(OBJ_ESC_ATTACH( 9999, 99991, 'file1.png', NULL, NULL, NULL),
                         OBJ_ESC_ATTACH( 9999, 99992, 'file2.png', NULL, NULL, NULL)) AS TABLE_ESC_ATTACH)
                    FROM
                         dual
     )     tbl_typ
WHERE
     tf.FILE_ID     = tfd.FILE_ID
AND tf.FILE_ID = tbl_typ.FILE_ID
AND tfd.FILE_ID = tbl_typ.FILE_ID;
Elapsed: 00:00:02.90
Execution Plan
Plan hash value: 3970072279
| Id | Operation                                | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                         |              |     1 |   194 | 4567   (2)| 00:00:55 |
|* 1 | HASH JOIN                               |              |     1 |   194 | 4567   (2)| 00:00:55 |
|* 2 |   HASH JOIN                              |              | 8168 |   287K|   695   (3)| 00:00:09 |
|   3 |    VIEW                                  |              | 8168 |   103K|    29   (0)| 00:00:01 |
|   4 |     COLLECTION ITERATOR CONSTRUCTOR FETCH|              | 8168 | 16336 |    29   (0)| 00:00:01 |
|   5 |      FAST DUAL                           |              |     1 |       |     2   (0)| 00:00:01 |
|   6 |    TABLE ACCESS FULL                     | TG_FILE      |   565K|    12M|   659   (2)| 00:00:08 |
|   7 |   TABLE ACCESS FULL                      | TG_FILE_DATA |   852K|   128M| 3863   (1)| 00:00:47 |
Predicate Information (identified by operation id):
   1 - access("TF"."FILE_ID"="TFD"."FILE_ID" AND "TFD"."FILE_ID"="TBL_TYP"."FILE_ID")
   2 - access("TF"."FILE_ID"="TBL_TYP"."FILE_ID")
Statistics
          7 recursive calls
          0 db block gets
      16783 consistent gets
      16779 physical reads
          0 redo size
        916 bytes sent via SQL*Net to client
        524 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed Indexes are present in both the tables ( TG_FILE, TG_FILE_DATA ) on column FILE_ID.
select
     index_name,blevel,leaf_blocks,DISTINCT_KEYS,clustering_factor,num_rows,sample_size
from
     all_indexes
where table_name in ('TG_FILE','TG_FILE_DATA');
INDEX_NAME                     BLEVEL LEAF_BLOCKS DISTINCT_KEYS CLUSTERING_FACTOR     NUM_ROWS SAMPLE_SIZE
TG_FILE_PK                          2        2160        552842             21401       552842      285428
TG_FILE_DATA_PK                     2        3544        852297             61437       852297      852297 Ideally the view should have used NESTED LOOP, to use the indexes since the no. of rows coming from object collection is only 2.
But it is taking default as 8168, leading to HASH join between the tables..leading to FULL TABLE access.
So my question is, is there any way by which I can change the statistics while using collections in SQL ?
I can use hints to use indexes but planning to avoid it as of now. Currently the time shown in explain plan is not accurate
Modified query with hints :
SELECT
    /*+ index(tf TG_FILE_PK ) index(tfd TG_FILE_DATA_PK) */
    9999,
    tbl_typ.FILE_ID,
    tf.FILE_NM ,
    tf.MIME_TYPE ,
    dbms_lob.getlength(tfd.FILE_DATA)
FROM
    TG_FILE tf,
    TG_FILE_DATA tfd,
        SELECT
        FROM
            TABLE
                    SELECT
                         CAST(TABLE_ESC_ATTACH(OBJ_ESC_ATTACH( 9999, 99991, 'file1.png', NULL, NULL, NULL),
                         OBJ_ESC_ATTACH( 9999, 99992, 'file2.png', NULL, NULL, NULL)) AS TABLE_ESC_ATTACH)
                    FROM
                         dual
    tbl_typ
WHERE
    tf.FILE_ID     = tfd.FILE_ID
AND tf.FILE_ID = tbl_typ.FILE_ID
AND tfd.FILE_ID = tbl_typ.FILE_ID;
Elapsed: 00:00:00.01
Execution Plan
Plan hash value: 1670128954
| Id | Operation                                 | Name            | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                          |                 |     1 |   194 | 29978   (1)| 00:06:00 |
|   1 | NESTED LOOPS                             |                 |       |       |            |          |
|   2 |   NESTED LOOPS                            |                 |     1 |   194 | 29978   (1)| 00:06:00 |
|   3 |    NESTED LOOPS                           |                 | 8168 | 1363K| 16379   (1)| 00:03:17 |
|   4 |     VIEW                                  |                 | 8168 |   103K|    29   (0)| 00:00:01 |
|   5 |      COLLECTION ITERATOR CONSTRUCTOR FETCH|                 | 8168 | 16336 |    29   (0)| 00:00:01 |
|   6 |       FAST DUAL                           |                 |     1 |       |     2   (0)| 00:00:01 |
|   7 |     TABLE ACCESS BY INDEX ROWID           | TG_FILE_DATA    |     1 |   158 |     2   (0)| 00:00:01 |
|* 8 |      INDEX UNIQUE SCAN                    | TG_FILE_DATA_PK |     1 |       |     1   (0)| 00:00:01 |
|* 9 |    INDEX UNIQUE SCAN                      | TG_FILE_PK      |     1 |       |     1   (0)| 00:00:01 |
| 10 |   TABLE ACCESS BY INDEX ROWID             | TG_FILE         |     1 |    23 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   8 - access("TFD"."FILE_ID"="TBL_TYP"."FILE_ID")
   9 - access("TF"."FILE_ID"="TBL_TYP"."FILE_ID")
       filter("TF"."FILE_ID"="TFD"."FILE_ID")
Statistics
          0 recursive calls
          0 db block gets
         16 consistent gets
          8 physical reads
          0 redo size
        916 bytes sent via SQL*Net to client
        524 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed
Thanks,
B

Thanks Tubby,
While searching I had found out that we can use CARDINALITY hint to set statistics for TABLE funtion.
But I preferred not to say, as it is currently undocumented hint. I now think I should have mentioned it while posting for the first time
http://www.oracle-developer.net/display.php?id=427
If we go across the document, it has mentioned in total 3 hints to set statistics :
1) CARDINALITY (Undocumented)
2) OPT_ESTIMATE ( Undocumented )
3) DYNAMIC_SAMPLING ( Documented )
4) Extensible Optimiser
Tried it out with different hints and it is working as expected.
i.e. cardinality and opt_estimate are taking the default set value
But using dynamic_sampling hint provides the most correct estimate of the rows ( which is 2 in this particular case )
With CARDINALITY hint
SELECT
    /*+ cardinality( e, 5) */*
FROM
     TABLE
          SELECT
               CAST(TABLE_ESC_ATTACH(OBJ_ESC_ATTACH( 9999, 99991, 'file1.png', NULL, NULL, NULL),
               OBJ_ESC_ATTACH( 9999, 99992, 'file2.png', NULL, NULL, NULL)) AS TABLE_ESC_ATTACH)
          FROM
               dual
     ) e ;
Elapsed: 00:00:00.00
Execution Plan
Plan hash value: 1467416936
| Id | Operation                             | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                      |      |     5 |    10 |    29   (0)| 00:00:01 |
|   1 | COLLECTION ITERATOR CONSTRUCTOR FETCH|      |     5 |    10 |    29   (0)| 00:00:01 |
|   2 |   FAST DUAL                           |      |     1 |       |     2   (0)| 00:00:01 |
With OPT_ESTIMATE hint
SELECT
     /*+ opt_estimate(table, e, scale_rows=0.0006) */*
FROM
     TABLE
          SELECT
               CAST(TABLE_ESC_ATTACH(OBJ_ESC_ATTACH( 9999, 99991, 'file1.png', NULL, NULL, NULL),
               OBJ_ESC_ATTACH( 9999, 99992, 'file2.png', NULL, NULL, NULL)) AS TABLE_ESC_ATTACH)
          FROM
               dual
     ) e ;
Execution Plan
Plan hash value: 4043204977
| Id | Operation                              | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                       |      |     5 |   485 |    29   (0)| 00:00:01 |
|   1 | VIEW                                  |      |     5 |   485 |    29   (0)| 00:00:01 |
|   2 |   COLLECTION ITERATOR CONSTRUCTOR FETCH|      |     5 |    10 |    29   (0)| 00:00:01 |
|   3 |    FAST DUAL                           |      |     1 |       |     2   (0)| 00:00:01 |
With DYNAMIC_SAMPLING hint
SELECT
    /*+ dynamic_sampling( e, 5) */*
FROM
     TABLE
          SELECT
               CAST(TABLE_ESC_ATTACH(OBJ_ESC_ATTACH( 9999, 99991, 'file1.png', NULL, NULL, NULL),
               OBJ_ESC_ATTACH( 9999, 99992, 'file2.png', NULL, NULL, NULL)) AS TABLE_ESC_ATTACH)
          FROM
               dual
     ) e ;
Elapsed: 00:00:00.00
Execution Plan
Plan hash value: 1467416936
| Id | Operation                             | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                      |      |     2 |     4 |    11   (0)| 00:00:01 |
|   1 | COLLECTION ITERATOR CONSTRUCTOR FETCH|      |     2 |     4 |    11   (0)| 00:00:01 |
|   2 |   FAST DUAL                           |      |     1 |       |     2   (0)| 00:00:01 |
Note
   - dynamic sampling used for this statement (level=2)I will be testing the last option "Extensible Optimizer" and put my findings here .
I hope oracle in future releases, improve the statistics gathering for collections which can be used in DML and not just use the default block size.
By the way, are you aware why it uses the default block size ? Is it because it is the smallest granular unit which oracle provides ?
Regards,
B

PL/SQL TABLE declarations must currently use binary_integer indexes

Hi,
I am having procedure written in form6i, this procedure is having pl/sql table datatyep "v_suppmesg orcl.err_message.error_tabtype;" this pl/sql datatype is defined in database and the procedure in database is not having any error in it.
But when i am compling my form its giving me error
PL/SQL TABLE declarations must currently use binary_integer indexes
and error point is *"i_rowindex"* in the sentance given below.
*"SET_GROUP_CHAR_CELL (g_suppress_error_colid, v_rowindex, v_suppmesg(i_rowindex));"*
PROCEDURE PRC_A IS
v_rowindex NUMBER (5,0) := 1;
v_suppmesg orcl.err_message.error_tabtype;
BEGIN
g_suppress_error_rgid := FIND_GROUP (g_suppress_error_rgname);
IF ID_NULL (g_suppress_error_rgid)
THEN
g_suppress_error_rgid := CREATE_GROUP (g_suppress_error_rgname, GLOBAL_SCOPE);
g_suppress_error_colid := ADD_GROUP_COLUMN ( g_suppress_error_rgid
, g_suppress_error_colname
, CHAR_COLUMN
, 15);
orcl.err_message.get_messages (v_suppmesg);
FOR i_rowindex IN 1..v_suppmesg.count
LOOP
ADD_GROUP_ROW (g_suppress_error_rgid, END_OF_GROUP);
SET_GROUP_CHAR_CELL (g_suppress_error_colid, v_rowindex, v_suppmesg(i_rowindex));
v_rowindex := v_rowindex + 1;
END LOOP;
ELSE
g_suppress_error_colid := FIND_COLUMN (g_suppress_error_rgname||'.'||g_suppress_error_colname);
END IF;
END Init_Suppress_Message;
can anyone tell me what's wrong in this.

I have the folowing compiling and executing fine (Forms 10.1.2):
DECLARE
type t1 is table of VARCHAR2(100) index by BINARY_INTEGER ;
tab t1;
rg_id RecordGroup;
gc_id GroupColumn;
BEGIN
     tab(1) := 'One' ;
     tab(2) := 'Two' ;
     tab(3) := 'Three' ;
     rg_id := FIND_GROUP ('RG10');
     IF ID_NULL (rg_id)
     THEN
          rg_id := CREATE_GROUP ('RG10', GLOBAL_SCOPE);
          gc_id := ADD_GROUP_COLUMN ( 'RG10'
          , 'COL1'
          , CHAR_COLUMN
          , 15);
          --orcl.err_message.get_messages (v_suppmesg);
          FOR i IN 1..tab.count
          LOOP
          ADD_GROUP_ROW ('RG10', END_OF_GROUP);
          SET_GROUP_CHAR_CELL ('RG10.COL1', i, tab(i));
          END LOOP;
     END IF;
END;Francois

BC4J tag - add new record only in child table using join query

Hi,
I have developed the struts base jsp for BC4J component application using jdeveloper wizard.
i have first developed the BC4J component. using emp table and dept table,
also developed the association between emp and dept , and create view object using created association.
when i haae developed the the struts base jsp for BC4J applicaion using alerady created view object. it creates automatically DataEditComponent.jsp and DataTableComponent.jsp and etc...
and when i want to add new row or record it automatically add the entry in both table ,
in above scenario i have used dept as master and emp as child table.
what is the solution , if i want to add row or record in only emp table.
please help me

Hi Reetesh,
I have written following code into the ADD ROW button
System.out.println("Coming in Click Event");
OAApplicationModuleImpl am = (OAApplicationModuleImpl) pageContext.getApplicationModule(webBean);
OAWebBean innerTablebean = (OAWebBean)webBean.findChildRecursive("region12");
OATableBean innerTable = (OATableBean)webBean.findChildRecursive("innerTablebean");
OAInnerDataObjectEnumerator enum = new OAInnerDataObjectEnumerator(pageContext,innerTablebean);
while(enum.hasMoreElements())
RowSet innerRowSet = (RowSet) enum.nextElement();
Row []rowsInRange = innerRowSet.getAllRowsInRange();
OARow newRow = (OARow) innerRowSet.createRow();
OADBTransaction dbt = am.getOADBTransaction();
Number b = dbt.getSequenceValue("PK_XX_BATCH_PROGRAM_PARAMETERS");
newRow.setAttribute("ProgramId", b);
newRow.setAttribute("ProgramParmId",b);
newRow.setAttribute("ParameterName",new String(""));
newRow.setAttribute("ParameterDataType",new String(""));
newRow.setAttribute("ParameterInOutType",new String(""));
innerRowSet.insertRow(newRow);
Now the problem occurs only when there are more than one rows in parent table... As many rows are there in parent table that many times the rows are being added.
With Regards,
Sandip

DESKI Report using Temp tables in MS- SQL server 2005

Hi,
I am trying to create a Free hand SQL DESKI report using temp tables in MS SQL Server-2005, I am using ODBC connection.
When I run the report, I am getting the error
u201CConnection or SQL sentence error (DA0005) No column or data to fetchu201D
Ex:
Select *
into #t1
from region
select * from #t1
drop table #t1
Please help.
Regards,
Pratik

Pratik, the SQL does not seem right. BTW you can only retreive data via Deski Free hand SQL. Also try to use OLE DB connection.

Child table provisioning to SQL using DBAT

Similar Messages

Maybe you are looking for