CIF user exit works for Integration Model only when we De-Activate
Hi Friends,
I have enhanced the CIF User Exit [EXIT_SAPLMEAP_001] and populated the code in Include ZXCIFU14 for calculating the value of Open Order Quantities[OOQ] with respect to Material, Plant and Contracts, PO's then It transfer the OOQ from R/3 to APO.
Here it is Triggering the User Exit and working fine only when we De-Actrivate and Activate the Integration Model thru CFM3.
But In case of PO changes it is automatically calling the User Exit and Trasfer the OOQ from R/3 to APO.
When we change the Master Data it is not triggering the User Exit Automatically.
Could you someone suggest why we required to De-Activate the User Exit when we run the Integration Model every time.
Please suggest if we need to follow any pre required steps and why this behaviour for User Exit [EXIT_SAPLMEAP_001].
Waiting for your answer......Thanks in advance.......
Regards,
M N Kumar
Hello,
Could you please provide details about the master data you mentioned in your query. This exit is called for PO, PR ,confirmation, shipping notificatoin objects.
Rgs- Vikas
Similar Messages
-
Can User Exit works for Settlement Rule in Maintenance Order creation?
Dear Experts,
I have this situation where I tried to create an Internal Maintenance Order via IW31 for multiple equipments from different functional location (different cost centers) using the Object List. However, the settlement rule has a problem to pull out as there's no Equipment in the reference object. That's the reason, I'm looking at the User Exit which I understand the IWO10027, can do the work. Since I'm new to User Exit, can I enhance the settlement rule by the following condition.
The costs spent on each equipment will be used as a basis of calculating the weightage (via equivalence no) for the settlement rule.
Can it be done that way?
regards,
AbrahamSanjay,
This data can be checked in the following user-exits:
COZF0001: Change purchase req. for externally processed operation
COZF0002: Change purchase req. for externally procured component
PeteA -
No service user name found for Integration Server
Hi All,
Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above error?
<SAP:AdditionalText>3:No service user name found for Integration Server is.00.******<S/AP:AdditionalText>
<SAP:Stack>Error when reading the access data(URL, user, password)
Thanks
IndrasenaHi,
did you configure your adapters like IDoc, RFC based on the SAP service user created in the SAP system ? i,e RFC destination etc..
did you check pipeline url is correct in the SLD>Business System><Integration Server> and check the url. It should have http port.
Also check this thread-
sRFC-adapter and file adapter with error: no adapter found
Regards,
moorthy -
User Exit MIGO for Purchase Orders
I need to check a purchase order during the Migo process.
I tried the User Exit EXIT_SAPLEINR_001, but the break-point has no effect. The user- exit is useful for schedule agrmts but it seems that there is a different handling.
Do you have an idea where I can check the MIGO date?hi alexander,
this program will display all the user exits available for any specified Tcode.
when u execute this code...... it will ask for tcode..... u enter any tcode.... it will display all available exits for specified tcode.....
i hope this may help u...... all the best....
report y_user_exit .
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
reward me if it is useful..............
with regards..... -
CIF User Exit for Purchase Order CIFPUR01
Hi All,
I had couple of questions related to the way CIF user Exit CIFPUR01 is called whenever there is a change in txn data related to Purchase Orders on R/3 side.
I could see that the User Exit is called only when I completely deactivate the Integration Model using CFM3, and then reactivate the same using CFM3. If I generate a new model using CFM1 and then activate the newest version using CFM3 (without deactivating the earlier version), the system doesn't call the User Exit and this is an issue because the custom code for some calculation logic that we have defined is never called !
Additionally, whenever the change in Purchase Order is done (say to the Quantity, Delivery date etc.), the User Exit is not called when change is done via ME22N and given that Integration Model is active.
Is this the correct behavior?
Any thoughts on the above behavior would be highly appreciated.
Thanks in advance,
Regards,
PrashantHi Vikas,
Thanks for your suggestion.
I had already tried that by putting the break points in the include of the User Exit and the control of the program didn't enter the User Exit code when I generated and activated new version of the Integration model (CFM1 followed by CFM3).
The control enters the User Exit code only when I completely deactivate the existing Integration model and then reactivate.
Below are the scenarios which explain my point.
Scenario 1:
1. Completely deactivate the existing Integration model using CFM3.
2. Put the break point on the user exit code.
3. Generate the new version of Integration model through CFM1.
4. Activate the new version through CFM3. In this case, the control goes to the user exit code and does the calculation specified by us. This is correct and works as expected.
Scenario 2:
1. The Integration model is already activated and I put the break points in the User exit code.
2. I regenerate the new version of Integration model via CFM1.
3. I activate the new version through CFM3. In this case, the control DOES NOT go to the User exit code. This is not the expected behavior.
Scenario 3:
1. The Integration model is already activated and I put the break points in the User exit code.
2. I change the PO qty for existing Purchase order.
3. The change is immediately transferred to APO as expected. The control doesn't get transferred to user exit code. Thus the custom calculation in the INCLUDE of the user exit is not done and hence custom qty is not updated in APO.
Please let me know if you would need more clarifications.
Thanks,
Prashant -
Can I work backward from APO CIF function module to ECC Integration Model
On our APO box, I have activated the "new-style" BAdI which is called by the CIF function module /SAPAPO/CIF_TLANE_INBOUND:
CALL BADI lr_ref_cif_enhance->inbound_tlane
How can I find out what the business analysts have to do in their ECC Integration Model
to make sure that the CIF_TLANE_INBOUND function module is called when the Integration Model is activated (so that the BAdI will also fire)?.
Our current Integration Model does fire the BAdI /SAPAPO/IF_EX_TR_TRANSFER , but not the "enhance inbound tlane" BAdI called by CIF_TLANE_INBOUND.
So ...to restate the question:
How do I figure out what I have to tell the business analysts to do in their Integration Model to make sure that CIF_TLANE_INBOUND is called when the model is actrivated ???Hi David,
I was away in a long meeting and just came back. A quick check in another R/3 (Enterprise) system showed the following:
There is no FM in the R/3 Enterprise box as CIF_TLANE_SEND and in APO (SCM4.1)
/SAPAPO/CIF_TLANE_INBOUND. This is not surprising esp when I check the other system versions based on which I did the initial research. It was ECC 6.0 with Enterprise Extension DFPS switched on (checked SWF5) and the APO system SCM 5.0.
Lucky me I checked the internal Sandbox systems instead of my client systems otherwise I would have posted there is no FM CIF_TLANE_SEND
Forget the SD Scheduling Agreement object I mentioned in the previous reply. That master data object will not trigger FM CIF_TLANE_SEND. I found the correct FM for it CIF_SDLS_SEND on R/3 side and /SAPAPO/CIF_TPSCO_INBOUND on the APO side.
So you have to necessarily use the BADI or User Exit enhancements for TPSRC and NOT TLANE.
In any case if its a Contract or Scheduling Agreement or Purchasing Inforecord master in R/3 (or ECC any version) then TPSRC is the FM used to create External Procurement Relationships (txn /SAPAPO/PWBSRC1) in APO during CIF transfer. Also a corresponding Transportation Lane (txn /SAPAPO/SCC_TL1) gets created when the Procurement Relationship is added in APO. Otherwise you can always manually create a transportation lane in APO which is an important master data for External Procurement Order / Requisition creation in APO.
Hope this helps. I am logging off for today - so no more further digging. But thanks to you I discovered another small "blackbox" of SAP. Will blog on this some time later - till then you can take a look at the [CIF Wiki|https://wiki.sdn.sap.com/wiki/display/SCM/CIF] page.
Best regards,
Somnath -
Program execution during RIMODAC2..will it always reach to cif user exit
Hello ,
We are implementing cif user exit for Purchase Order at R3 side to capture additional date field. So logic to capture additional date field is put in user exit CIFPUR01. We have RIMODAC2 background job for Purchase order running on daily basis.
if there is no change in standard Purchase Order objects. When RIMODAC2 is executed for purchase order Integration models ..will program execution still always reach to R3 user exit part of the program irrespective of if any change in standard purchase order object has happened or not.
Will appreciate your answer.
Thank you
Best Regards
Nilesh PatilNilesh,
I am no longer sure I understand the question.
RIMODAC2 activates the model. Once a model is activated, if someone changes certain specific fields in an R/3 object, then these changes are sent to SCM, either immediately or via change pointers. All this happens irrespective of IM userexits.
If this same field in this same object is changed in R/3, and a userexit also has been implemented, the userexit will execute according to its design, performing whatever task it has been programmed to do.
If you create and implement a userexit, it begins working at that moment in time that it is installed. Data that flowed across 'yesterday' to SCM is not affected. Data that flows across 'tomorrow' will be affected. Data in R/3 will usually only flow across to SCM if there is some kind of triggering event, usually a database 'change' transaction (e.g., ME22N for POs) The mere act of installing a userexit will not generally affect existing data on either side. The userexit only affects data that flows across the IM. Unchanged records in the R/3 database will generally not be sent to SCM by the IM, and will not be subject to userexit processing.
It is not generally the responsibility of a functional consultant to explain the workings of a userexit to a technical consultant. It is enough that the functional identifies the userexit, and specifies the business requirement in as much detail as possible. The developer is then responsible for carrying out the coding. Technicals are generally expected to be competent enough to determine from the userexit docs, and from the surrounding code, how a userexit works. They can also raise a message to SAP. In the end, it is all just ABAP, although userexit implementations can be quite challenging. SAP seldom provides enough details in their documentation. Once the Technical has finalized the code, Functional and Technical together then perform unit testing, before passing the mods to users for integration testing.
If your client's coders are unable to manage the task, perhaps they should engage your company to provide technical expertise, as well as functional expertise.
Best Regards,
DB49 -
User Exit/BADI for Transaction CNR1 & CNR2
Hi All,
We have a requirement where we need to make use of the transaction CNR1 & CNR2 to validate the employee number, can anyone tell me is there any user exit/BADI available for this purpose, I have searched for the user exits using a small utility program which resulted in 'No Exits',
Your quick help would be highly appreciated,
Rgds,Hi Sailatha,
I am not very clear with the requirement. I would appreciate if you can explain me the scenario.
As I understand the requirement there is no user exit exists for this purpose but there is one BADI available for CNR2 which can only be used if we try to remove the HR assignment to work center and the assignment is to Object Type "US" (User HR object). Hope this helps.
Definition name: CRHRORG
Method: CHECK_DEASSIGN_HRORG
Kind Regards,
Sanjeev Munjal -
User exit / BADI for training and event management
Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOIHi
BADI's for Training and Event Management
HRTEM00MASTERDATA HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT Customer Enhancement: Name Format
RHPV0001 Customer Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA HR: Training and Event Management - Master Data
~~~Ganesh Kumar K. -
To find out appropriate user exit/ badi for transaction VT01n
Hi,
I have the following requirement.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
Thanking in advance to give your suggestion in order to resolve it.
With regards,
Ajit.Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
Just for your information the User exits available for VT01n are
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
V56LOCID Shipment Processing: Determine Location Identification
V56MVT04 Extensions for Collective Processing of Shipments
V56SLDET Shipment processing: Leg determination
V56TDLIF Filter Delivery Items for Shipment
V56UCHCH Shipment processing: Check whether changes were made
V56UCHCO Check shipments are complete
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UNUMB Shipment number allocation
V56USTAT User-individual definition of transportation planning status
V56USVDO Update new objects for transport
V56USVDP Preparation for updating new objects for transport?
Award points if helpful..
Thanks -
Can anyone give me user exit name for create/update purchase order partners
Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.hi,
check these exits.
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number -
Set default value for people picker only when user checks a checkbox (Sharepoint 2010)
The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
User exit screen for LM51--- urgt.
Hi gurus ,
I am trying to define new User exit screen for LM51. I have developed new screen assigned as,
logical == 9151 variant=9 actual screen = 2151
assighned in lrfmd with variant = 9
Even In Lm51 its not calling the subscreen 9151.i am not getting reson,
kindly help meIt is difficult to understand your requirement,but I suggest you please refer document on mobile data entry screen. Also to develop screen you have to use standard RF screen. Please consult with technical person who has worked on development of RFscreen.
Regards,
PRashant -
User exit / BADI for billing block in VL01n
Hello Techies,
Through custom transaction we are creating delivery notes. We run a background job to pick up these delivery notes & create return deliveries using BDC call transaction method calling VL01N (We also create order of type return for same). Though i can not see any place where billing block is filled in custom program but still there are some deliveries with billing block. Could you please let me know if there is any User exit / BADI for billing block or any configuration setting for same?Just to add more details:
Our program sets memory id field.
We call transaction VL01N.
program clears memory id field value.
all this happens in loop for number of deliveries.
In VL01 user exit overwrites LIKP-FAKSK value to 05. However we have written code here which imports value from memory id. by this we come to know that we have created this delivery using custom transaction & billing block should not be set.
From this we can conclude that only when sy-subrc for import memory id is not equal to 0 then billing block is set.
what could be the reason for sy-subrc for import memory id is not equal to 0 ?
can it be because of number of deliveries created at a time where memory id export / import is causing problem?
we are not able to replicate this issue in Dev/Quality systems.
Thanks & Regards,
Sachin -
User Exit / Badi For CJ37, CJ34, CJ38
I want user Exit / Badi For CJ37, CJ34, CJ38 which will execute whenever there is any change for WBS budget (supplement / transfer / return) regardless WBS have assigned values.
This is required to trigger my Workflow.
Available Exit which i know is EXIT_SAPLBPFC_002 is executing only when WBS have assigned values otherwise not.
PLease reply ASAP.Even you can search all exit and BADI:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=howtofinduserexitandbadi&adv=false&sortby=cm_rnd_rankvalue
Maybe you are looking for
-
The star I would usually double click to add a bookmark is already there with some wrong title that has nothing to do with title of website at top right. It also is in various folders I have. Only way to fix each one is to delete title listed and typ
-
Printing report in calendar format
I need to print a report in a calendar format with monthly view in Reports 9i. I am aware of Portal and APEX but its not an option. There is a table which consists data for several months, and I am trying to use oracle forms as parameter form to pass
-
Hi, since updating to OSX10.10, my Finder menu has been displaying two languages - not really a problem, more a query as to why, and how to resolve it. Im running a mid 2010 27' iMac with the SSD and 1TB option and all latest software (OS X 10.10.1).
-
I already have Adobe reader installed and have been using it. I am now being asked by my banks to accept the end user license agreement. How do i access this ?
-
Field to MIGO cert.enclosed in the BAPI BAPI_GOODSMVT_CREATE
Hi All, I am doing Good Receipt for Purchase Order. In MIGO we have Cert.enclosed (Quality) value Yes or No. I want to insert the Cert.enclosed (Quality) using BAPI BAPI_GOODSMVT_CREATE. Please let me know which field in BAPI_GOODSMVT_CREATE, I can i