Cin registers query

hello all,
what is the diffrence between updating and extracting the registers.
is registers are not updated automatically when excise invoice is posted?
also explains the excise depot purchasing scenario from mm point of view.
pls explan me in detail,so that other sdn readers also benefit from this thread.
regards
sumit simran

HI,
In Depot plant register Rg23D will get update and no excise invoice will get generated means part2
rest process in sap as normal excise
table for depot is J_1IRG23D
read following link
[http://forums.sdn.sap.com/thread.jspa?threadID=1756210]
Regards
Kailas Ugale

Similar Messages

Cin registers are not updating

cin registers RG23A RG23C PLA are not updating eventhough i have done al required l configurationl settings
Edited by: akhilreddym on Jul 27, 2011 9:15 AM

Hi,
it wont update automatically, you have to update them manually.
T-codes to view excise registers are
J1I2 - Prepare a sales tax register
J1I5 - Update the RG 1 and Part I registers
J2I5 - Extract data for excise registers
J2I6 - Print excise registers
J1IR - Download register data
thanks & regards,
siva reddy.s

CIN registers Update Process

Dear Friends,
Can anybody guide me for the process used to Update the CIN registers (RG1, RG23A, RG23C etc.) using J1I5.
Regards,
Harsh

Incase of Return Sales Order:
T.Code for copy control: VTAF
Source Document: F2
Target Document: RE
Item category REN
Considering the above settings are done:
Create return sales order RE (with Reference to Billing Document) & the data will be copied as it is in Return Sales Order - RE. For Eg: here you require to change to quantity from 10 to 2, as you want to take back into Inventory of only 2.
Incase of Return Delivery:
T.Code for copy control: VTLA
Source Document: RE
Target Document: LR
Item category REN
Considering the above settings are done:
Create Return Delivery through T.Code VL01N & do PGR (Post Goods Receipt). This will add the stock to blocked stock. This will take care of Inventory.
To address the issue of how to take Credit for Excise, use T.Code: J1IH --> other Adjustment & based on the credit to be taken, make the necessary entry.
Incase of Credit Memo:
T.Code for copy control: VTFA
Source Document: RE
Target Document: Credit Memo
Item category G2N (Check in System)
First in VA02, remove the Billing Block in Return Sales Order - RE & save the document. Now in T.Code: VF01, enter Return Sales Order Number & select the appropriate Billing Type (Credit Memo) & Enter& Save. This will create Credit Memo.
Hope this helps you.
Regards,
Rajesh Banka

Regarding CIN Registers

HI Experts
1. What is the Meaning of registers and their purpose.
How many registers have to update in CIN Configuration
2. What is the meaning of Exports Under bond and how to configure.
3. what is the 100 % EOU in CIN , and how make the configuration in CIN
4.What is the meaning of Deemed Exports, and how to configure in CIN point of view and SD point of View.
5. what is the meaning of CENVAT utilyzation, how to configure in CIN
Please do the needfull ASAP and if you guys having any config documents for the above please share the same to
mjr_raju at yahoo.co.in
Thanks
Raju

Hello Raju,
Ques: What is the meaning of Exports Under bond and how to configure.
Ans: It is notification under which an Merchant exporter or exporter export goods without payment of duty and goods moves out of their premises without paying any duty. Bonds can be based on different type of export sales. ARE-1 Bond for Export and ARE-3 Bond for Deemed Export.
Ques: What is the 100 % EOU in CIN , and how make the configuration in CIN
Ans:Units undertaking to export their entire production of goods and service, except permissible sales in the DTA, as per the Export u2013 Import Policy are referred to as Export Oriented Units (EOU). The Electronic Hardware Technology Park (EHTP) Scheme and the Software Technology Park (STP) Schemes are two special variants of the general EOU scheme. These units can undertake manufacture of goods including repair, remaking, reconditioning, re-engineering, rendering of services like development of software data processing & conversion, data management and call center activities. The purpose of EOU scheme is to boost exports by creating additional production capacity. The EOUs basically function under the administrative control of the concerned Development Commissioner of Export Processing Zones i.e., under the Commerce Ministry, Government of India.
Ques: What is the meaning of Deemed Exports, and how to configure in CIN point of view and SD point of View.
Ans: As per cahpter 8 of Foreign Trade policy, Deemed Exports" refers to those transactions in which the goods supplied do not leave the country and the payment for such supplies is received either in Indian rupees or in free foreign exchange.
The following categories of supply of goods by the main/ sub-contractors shall be regarded as "Deemed Exports" under this Policy, provided the goods are manufactured in India:
(a) Supply of goods against Advance Licence/Advance Licence for annual requirement/DFRC under the Duty Exemption /Remission Scheme;
(b) Supply of goods to Export Oriented Units (EOUs) or Software Technology Parks (STPs) or Electronic Hardware Technology Parks (EHTPs) or Bio Technology Parks (BTP);
(c) Supply of capital goods to holders of licences under the Export Promotion Capital Goods (EPCG) scheme;
(d) Supply of goods to projects financed by multilateral or bilateral agencies/funds as notified by the Department of Economic Affairs, Ministry of Finance under International Competitive Bidding in accordance with the procedures of those agencies/ funds, where the legal agreements provide for tender evaluation without including the customs duty;
(e) Supply of capital goods, including in unassembled/ disassembled condition as well as plants, machinery, accessories, tools, dies and such goods which are used for installation purposes till the stage of commercial production and spares to the extent of 10% of the FOR value to fertiliser plants.
(f) Supply of goods to any project or purpose in respect of which the Ministry of Finance, by a notification, permits the import of such goods at zero customs duty.
(g) Supply of goods to the power projects and refineries not covered in
(f) above.
(h) Supply of marine freight containers by 100% EOU (Domestic freight containersu2013manufacturers) provided the said containers are exported out of India within 6 months or such further period as permitted by the Customs; and
Supply to projects funded by UN agencies.
(j) Supply of goods to nuclear power projects through competitive bidding as opposed to International Competitive Bidding
Ques: What is the meaning of CENVAT utilization, how to configure in CIN
Ans:CENVAT is a centrally value added tax. CENVAT (Central Value Added Tax) has its origin in the system of VAT (Value Added Tax), which is common in West European Countries. Concept of VAT was developed to avoid cascading effect of taxes. VAT was found to be a very good and transparent tax collection system, which reduces tax evasion, ensures better tax compliance and increases taxrevenue.
All the configuration takes place when you go for the CIN Configuration from SD / MM. Kindly, refere following for CIN configuration.:
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
Each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
Take care.
JP

Cin registers

Hi experts,
Could any one answer the queries
1. What is meant by utilisation in CIN
2. What are the configuration setting required for updating the excise registers.
points will be awarded for useful replies.
Thanx in advance,

HI
CIN is meant for taxation of excise tax, sales tax.In manufacturer put the input tax when he produces goods.When you buy the material you are taking credit MODVAT/CENVAT for the material and you can claim from excise department.
I'm giving you the a/c entries for CIN
For Domestic Procurement of Raw Material
     During GR
               Material Stock      Dr.
               GR/IR clearing          Cr.
     During Excise Invoice Credit
               Cenvat Account     Dr.
               Cenvat Clearing          Cr.
     During Invoice Verification
               Cenvat Clearing     Dr.
               GR/IR Clearing     Dr.
               Vendor Payable          Cr.
For Domestic proceurement of Capital Goods
     During GR
               Material Stock      Dr.
               GR/IR clearing          Cr.
     During Excise Invoice Credit
               Cenvat Account     Dr.     (50%)
               Cenvat On-hold     Dr.     (50%)
               Cenvat Clearing          Cr.
     During Invoice Verification
               Cenvat Clearing     Dr.
               GR/IR Clearing     Dr.
               Vendor Payable          Cr
Subsequent of Capital Goods
               Cenvat Account     Dr.     (50%)
               Cenvat On-hold          Cr.     (50%)
For Import Procurement of Raw Material
     During Customs Duty Clearing invoice
               Custom Clearing     Dr.
               Custom Payable          Cr.
     During GR
               Material Stock      Dr.
               GR/IR clearing          Cr.
     During Excise Invoice Credit
               Cenvat Account     Dr.
               Custom Clearing          Cr.
     During Invoice Verification
               GR/IR Clearing     Dr.
               Vendor Payable          Cr.
For Excise Duty Credit of Raw Material without PO
               Cenvat Account     Dr.
               Cenvat Clearing          Cr.
For Excise Duty Reversal through Excise JV
               Cenvat Clearing     Dr.
               Cenvat Account          Cr.
During Excise Invoice Creation
          Cenvat Suspense Account     Dr.
          Cenvat payable               Cr.
For TR6C Challan
PLA Account          Dr.
PLA on hold Account          Cr.
During Fortnightly Utilization
Cenvat payable     Dr.
Cenvat Account          Cr.
PLA Account               Cr.
Note: Cenvat Suspense Account should be cleared apprpiately using FI JVs.
For Subcontracting Challan Reversal
          Cenvat Reversal     Dr.
          Cenvat Account          Cr.
For Subcontracting Challan Recredit
          Cenvat Account     Dr.
          Cenvat Reversal          Cr.

CIN related query

Hi
I am trying to configure CIN. I have configurde every thing that is cond type JMOD, JAEd etc and the resp. SD cond type JEX2, etc. I also configured the rates for UTXJ and maintaind the record in J1id. When I an creating the order the FI con types are not appearing
What could be the prob
Replay
Vinod

I hav checked it for other material and now FI cond types are coming. Now my new problem is that JNED & JSED are copying 100% of PR00, where as I have not mentioned any rates for this condition types where as I have maintained rates for JCES in J1id but this rate is not copieing and showing it as 0%.
What could be the reason
Pls replay
Vinod

CIN RELATD QUERY

hi friends,
can i know the present percentage of
BED
AED
SED
CESS
LST & CST ????
thanks
manu

Hi,
BED : 14%
AED : 4% (vary depends on the product)
SED : 4% (vary depends on the product)
CESS : 2 %
ECESS :1%
LST & CST ????
LST=VAT, it vary depends on State to State like 4%,12.5% etc.
CST : This is applicable for Intrastate sales and at present its 3%.
Rewards if it helps
Regards
Goutham

India localization CIN

Hi,
I want to know whether the balances of cenvat credit recievable and excise payable balances in GL can be reconciled with that of in CIN registers like RG 23 & RG 21. Further can we utilizse surplus credit in one company code with that of the laiblity of other company code if their excise group is same. Also when we utilizse excise credit whether excise registers get updated and which are those registers? Please let me know if anyone has faced these kind of challanges.
Thanks

Hi,
I think you can maintain various rates of taxes using the following key combination of access sequence which is assigned to your Tax condition type
Country/Plant region/Customer Region/Tax cl 1 of customer/ Tax cl1 of material. ( i think it is 368 table check in V/05).
Regards

Purpose of registers

Gurus
i have searched the forum and did not get the sutiable answer for this .so give me your answers.
what are this registers exactly ,
why are they used ,
why we need to update the registers,
as sd people do we really need to take care of registers if so when and why?
if any one has a link on registers kinldy post

Hi Shiva,
I hope you are asking about CIN Registers:
As per Indian Law, the excise authorities require you to maintain the following registers relating to excise duty.
Register RG 1
Register RG 23A, Parts I and II (for raw materials)
Register RG 23C, Parts I and II (for Capital goods)
Register RG 23D (applicable only to Ist or IInd stage dealers)
Personal Ledger Account (PLA)
Besides, ER-3 (formerly RT-12) returns have to be filed monthly (or quarterly for SSIs).
Register RT-12 Register RG 23A and 23C
When the ordered materials arrive, you post the goods receipt and the excise invoice. The R/3 system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
A record of all receipts and issues related to excisable materials is being kept in excise register in RG 23A (Raw Material) and RG 23C (Capital goods) by manufacturing plants. The register consists of two parts:
Part I shows the quantities of the materials.
Part II shows the amounts of excise duty on the materials, and how much you have transferred to the CENVAT accounts.
Part I Entries
When you enter a goods receipt for excisable materials, the system automatically asks you if you want to create the Part I entry in Register RG 23A or RG 23C. If so, the system generates a Part I entry. If not, it does not, but you can generate all missing Part I entries later.
In the following two cases, the system does not automatically generate Part I entries for goods issues of excisable materials;
A goods issue for vendor returns
A goods issue for stock transport orders for plants (in case of Goods Movements transaction only)
Part II Entries
The system automatically creates an entry in Part II of the appropriate register in case of posting of an incoming excise invoice, or an outgoing excise invoice. All Part II entries are serially numbered. An accounting document for each posting is created by the system to transfer the various types of excise duty to the appropriate CENVAT account.
Regards,
Abhee.

Can u

Hi Experts
can any body send the answers bellow this questions?
CIN Questions
What is excise duty?
What is excise group?
Which business processes are covered under CIN?
Which t-code display CIN menu?
What master data set up is required before CIN customization can take effect?
How many types of registers are there to be maintained in CIN?
How does system know that which register to update during GR?
How the CIN registers are updated?
What do you mean by extraction and printing of Registers?
What is the difference between the tax procedure TAXINJ and TAXINN?
How does system know that which condition types in tax procedure and import pricing procedure are CIN relevant?
How does system differentiate between deductible excise duty and non-deductible excise duty?
What are the purpose of condition types NAVS, JEXS and JEXC in pricing procedure?
What is the purpose of subtotal 5 & 6 in the pricing procedure?
What setting do we need to do so tax code can work during creation of purchase order and sales order?
What are the excise transaction types (ETT)?
What is sub-transaction type?
Which settings determine that during MIGO transaction, excise invoice can be captured (posting of part I entry) or Pos
What CIN settings are required if we have to do STO between two manufacturing plants or between manufacturing an
Why should a STO (stock transport order) have pricing procedure?
Explain domestic procurement at manufacturing unit?
Explain domestic and import procurement at depot plant?
What needs to be done if the Excise Invoice quantity is not equal to GR quantity?
Is the depot plant process applicable to all the industry sectors?
Explain import procurement at manufacturing unit?
Explain STO process from manufacturing unit to Depot Plant
What is the functionality of the rejection code/reason code?
Specify which movement types involve either excise invoices or part 1 entry of register or both
In the subcontracting attributes (CIN IMG) what is the difference between Movement Type Group Issues and Moveme
What are two different possible scenarios for subcontracting process?
How is the recursive BoM scenario (the parent and the child material being the same) handled in subcontracting?
For which of the movements will I run the Quantity Reconciliation for the subcontracting Challan?
How do I delete challans assigned to the Goods Receipts document?
How will you handle sales return from customer?
How will you handle vendor return and GR cancellation?
How does system determine accounts to be posted for CIN registers?
How does fortnightly utilization determine the accounts to be posted?
What is transaction type u2018UTLZu2019 used for?
What will be the accounting entry during GR of raw material, Excise invoice posting and subsequent LIV of material?
What should be accounting entry in subcontracting reversal / Recredit?
What will be the accounting entry during GR of capital material, Excise invoice posting and subsequent LIV of materia
How does the credit of the amount taken which has gone to Cenvat ON Hold account?
Under what circumstances we may need to transfer the credit amount (against a specific invoice) from Cenvat ON Ho
How the accounts are determined when capital goods are procured?
What will be the accounting entry during scrapping of excisable goods?
What will be accounting entry when the materials are stock transferred from manufacturing unit to depot plant?
What will be the accounting entry for sales excise invoice?
What will be accounting entry during PLA entry and utilization?
What is utilization? How do we execute it in CIN?
How do we take utilization against service tax receivable and payable?
What are PLA and TR6C Challan?
What are the number range objects for which number range should be defined?
What is export under bond?
Edited by: madhusap01 on Dec 22, 2011 12:04 PM
Moderator: Why only 30 questions? You should have posted at least 300; otherwise, no answer can be given

We don't unlock phones here. If your phone came from another carrier and you need it unlocked to work on yours, you can do a search on the internet for people who will unlock your phone.
If you've used up all your attempts to unlock your MEP code, only BlackBerry can help you (we're not BlackBerry employees, we're users like you who volunteer to help out). You'll need to contact your carrier to get access to BlackBerry to perform this function.
And finally, please edit your post and remove your PIN number. Posting it in these forums is not permitted.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Excise duty + flat rs.10000

Hi
I have one MM cin related query.
The client wants for perticulat item the excise duty cond type JMO2 should be 16%+ Rs.10000. By using the AltCaBv routine 363 i am getting 16% exacly, which I have maintained in J1id in excise tax rate but there i also have maintaied in exceptional material excise raters.10000 for this material, which is not getting calculated.
can you give any suggestion
Vinod Pawar

Hi all,
I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document but while saving it gives me the following error message:
Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
Message no:f1030
DIAGNOSIS:
The application has accessed a funds management or cash management module with parameters messing or defective.
PROCEDURE:
Notify your system administrator.
Hope some body would help me out.
Thanks

SAP SD CIN Query- 7

Hi
I am facing a problem in CIN. The last updation date(J1I5) for for RG23A-1 is different from last extraction date (J2I5). The extraction date is ahead of updation date. If updation isn't complete for any particular date then system cant extract into the register for the same date.
pls help me with it.
Deepak

hi,
The last update date was 01.06.2010 and the last extraction date was 27.06.2010 It means the you have executed the transaction of j1i5 that is updating the registers on 01.06.2010 and if you have extracted on 27.06.2010 than the system will show the extracts till the ;ast update was done. So it might be possible that you have updated in 06 month and you are taking a print in 07 month and for that you have to extract it by j2i5.
So if you want the entries to come in the registers first update til required date and than extract.
Regards,
Krishna O

Initial update of Excise Registers (India - CIN)

Hi Team,
Please let's know the process to be followed and the cares to be taken for initial upload of entries into CIN - Excise Registers (from legacy) during data migration at the time of Go-Live. Request you to provide the details of tables as well
Thank you,
Regards,
Ramakrishna

hi
OPENING BALANCE
Use following
http://help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.doc
http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/8e113999724854e10000000a11405a/content.htm
opening balance for 2 and 1 %
Go to SE11, give table: J_2IACCBAL and choose display F(7).
On Dictionary: Display Table screen, choose Utilities --> Table contents --> Create Entries, from menu bar and make the following entries
Client - Leave it blank
Enter your excise group,
Register: RG23AECS for Edu Cess 2% and
RG23AAT1 for SEC Cess 1%.
CL BAL: enter the closing balace here only and remaining follow the same procedure for entering RG23ABED .
This is only the direct table entry of opening Balance, so you need to make an FI entry thro F-02. For ex.
RG23A ECS Part II Account DR
To Initial balances clearing a/c
Only after this extract the balances thro J2I5 else you may encounter getting wrong extract.
follow the same procedure for RE23C cesses also.
hope it clears
regards
kunal

Registers in SAP for CIN..?

Hi all
Can anybody explain me about the registers available in SAP for CIN.
1.What r all registers available in SAP-CIN..?
2.How we will be paying the excise duty to govt.
Thanks
sap-mm

Hi,
As required, I am giving you the details of Excise Transactions to be performed in a Manufacturing Plant;
System Requirements to perform Excise Transactions: -
a. All statutory Excise details of the plant like;
 ECC Number
 Excise Registration Number
 Excise Range
 Excise Division
 Excise Commissionerate
 Central Sales Tax Number
 Local Sales Tax Number
 Permanent Account Number
 Service Tax Registration No, etcu2026
b. Company Code Settings for Excise
c. Plant Settings for Excise
d. Excise Groups creation and necessary configuration
e. Series Groups creation and necessary configuration
f. Necessary changes in Tax Procedure and Pricing Procedures for calculation Excise Duties like Basic Excise Duty, Education Cess, Secondary Education Cess, VAT, CST, etcu2026
g. Maintenance of new Tax Codes for Excise Duty conditions and calculation
h. Maintenance of Forms like u201CCu201D Form, u201CHu201D Form, etcu2026
i. Excise Account Determination for proper posting of Excise Duties at the time of different Transactions like, Excise Credit Entry at the time Goods Receipt, Excise Invoice creation in Sales, Monthly Utilization, Excise JVs, etcu2026
j. Classification of Movement Types which are involved during Excise Transactions
k. Required settings for different types of Exports like; Export under Bond, Deemed Export, Export under rebate, etcu2026, Settings of ARE-1, ARE-3 procedures, settings for different license types like CT-1, CT-3, etcu2026
l. Development of Forms/ Layouts for Excise Registers like RG23A, RG23C, RG23D, RG1, PLA, RT-12, etcu2026
m. Maintenance of Number ranges for Excise objects like; RG23A Part I&II, RG23C Part I&II, Excise Invoice No. ranges for Local and Export Sales, 57F4 Challan No. Ranges, etcu2026
n. Maintenance of Excise Masters like;
 Chapter IDs
 Material & Chapter ID Combination
 Material Assessable Value
 CENVAT Determination
 Vendor Excise Details
 Customer Excise Details
 SSI Rates for SSI Vendors
 Excise Tax Rates
Excise Transactions: -
a. Incoming Excise Invoice entries
 For Indigenous Materials (Raw Materials)
 For Imported Materials (Bill of Entry)
 For Capital Goods
 Depot Excise
b. Creation and maintenance of 57F4 Challans for Subcontracting Process
 Subcontracting without Payment of Duty
 Creation of Subcontracting Challan
 Refer Subcontracting Challan at the time of GR
 Reconciliation of Subcontracting Challan
 Completion of Subcontracting Challan
 Generation of Annexure IV
 Subcontracting under Full Payment of Duty
 Creation of Excise Invoice w.r.t. Transfer Posting Document
 Capture Excise Invoice at the time of GR of Finished Goods
 Post Excise Invoice
c. Outgoing Excise Invoices
 For Domestic Sales
 For Export Sales
 Export under Bond (ARE-1)
 Deemed Export (ARE-3)
 Export under Rebate
 For Vendor Return
 Depot Excise Invoice
d. Monthly utilization
e. Excise JV (CENVAT Adjustment Postings): -
 Material Write-off
 Material Non-Production
 Additional Excise
 Other Adjustment
 TR6 Challan
 Excise Cancellation
f. Printing of Excise Invoices, ARE-1, ARE-3 Documents, etcu2026 with necessary excise details.
Excise Registers: -
a. RG23A Part I: - Part I shows the quantities of the Input Materials.
b. RG23C Part I: - Part I shows the quantities of the Capital Goods.
c. RG23A Part II: - Part II shows the amounts of excise duty on the Materials, and how much you have transferred to the CENVAT accounts.
d. RG23C Part II: - Part II shows the amounts of excise duty on the Capital Goods, and how much you have transferred to the CENVAT accounts.
Note: - Previously, manufacturers were required to keep two separate registers, RG 23A and RG 23C for raw materials and capital goods respectively. This is no longer the case, but the distinction still remains in the system.
e. PLA: - Personal Ledger Account
f. RG23D: - A record of receipts and issues of excisable materials, as kept by depots.
g. RG1: - A register of excisable finished goods kept by manufacturing plants.
h. ER 1: - The Government of India vide Notification No 26/2005-Central Excise (N.T.) prescribed the form E.R.-1 to be filled with excise authorities, by all the assessees (as defined under Central Excise Act) on a monthly basis for production and removal of goods and other relevant particulars and CENVAT credit.
Note: - Now ER 1 fulfills requirement of RT-12 i.e. Monthly Return which is to be submitted to Excise Authorities every month end.
Forms / Outputs / Reports: -
u2022 Invoice output u2013 to check whether the existing invoice format is acceptable / make arrangements for a new invoice as per excise compliance
u2022 To arrange for the formats of all excise registers and reports. To name a few
o RG23A
o RG23C
o Monthly return for Excise
o RG1
o PLA
o RT-12

CIN query

Hello,
IN the CIN what do we configure in these steps mentioned below:
Classify condition types
Assign Users to Material Master Screen Sequence for Excise Duty
Also what do you mean by utilization in CIN?
Regards,
Jhon

Dear s.jhon,
Before post please search in the forum or wiki you can find immense information. However please find this.
Classify condition types
You need to configure the respective condition types according to your business requirement for instance JEXP, JCEP,JCET
so on and so forth.
Assign Users to Material Master Screen Sequence for Excise Duty
You have to assign the respective user ids in order to access the material masters CIN data.
Also what do you mean by utilization in CIN?
It is offsetting on inbound excise duty and outbound excise duty.
Also please find this links.
http://wiki.sdn.sap.com/wiki/display/ERPLO/CIN+Configuration
Need Cin Configuration related to sd
Thanks&Regards
Raghu.k

Cin registers query

Similar Messages

Maybe you are looking for