Cisco 1921 CCP discovery error username/password

Hi,
I have some servers here that needed a more stable router than my WNDR3700 with dd-wrt could offer. I have never used the Cisco IOS before and am a gui lover by nature. After reading about the new CCP and its flexability I made the plunge. I have done the initial configuration via a serial connection. I gave the router its basic information and figured out how to turn on HTTP/HTTPS via the IOS. CCP pro is unable to discover the router due to a bad username or password. I entered in 3 different passwords during setup but never a username and password. I thought all I needed to do was to create a new level 15 username and password.
I found this command
Router(config)# username name privilege 15 secret 0 password
I tried to use the new user but I still couldnt discover the router when I use "show users all" I do not see the created user.
I have been at it for several hours now. I had hoped that with these new ISR gen2 routers I wouldnt need to learn to much of the IOS at once. Is this not the case?

Hi Dave,
Cisco 1900 Router should be shipped with a default configuration for you to able to discover the router with the IP address 10.10.10.1. However, if you have already changed the default config, the command you are using to configure a username is correct.
Router(config)# username name privilege 15 secret 0 password
You could be seeing an incorrect username password error on Cisco CP if you are missing the below command:
Router(config)# ip http authentication local
I have just mentioned the mandatory configuration on the router to be able to discover the router on CCP:
Router(config)# username name privilege 15 secret password
Router(config)# ip http server
Router(config)# ip http authentication local
Router(config)# ip http secure-server <-- for secure connection
Router(config)# line vty 0 4
Router(config-line)# login local
Router(config-line)# transport input telnet ssh
Router(config-line)# line vty 5 15
Router(config-line)# login local
Router(config-line)# transport input all
Thanks
Chaitra

Similar Messages

Cisco 1921 no username password commad

Hi,
I ahve countered an issue today. I was working on 1921 which is used as test router in ISP. I have loaded a router with test config with username & password in running config. After a while i have removed the username & password with no username---password---- command, then i logged out of router. But now its not allowing me to login as its asking username & password while its not taking any username/password not even cisco/cisco, admin/administrator.
Is this a behaviour of 1921 as i have not copied the runn to start but i disconneced from secure putty session when router was in running config mode. Kindly help.
Regards,
Vishal

You have the router configured to use the local user database, but you have removed all the accounts. Doing that will not disable the configuration for using the local database. What you are experiencing is "normal". Menaing that the router is configured for authentication but there are no valid accounts. Like Reza stated, reboot the router and you'll get the startup config. If the config was saved, you'll have to do a password recovery on it.

Cisco Jabber Invalid Username/Password

Hello All,
I am currently deploying CUCM 8.6 with CUP 8.6. The end users of CUP are synced to CUCM, which in turn synced to an OpenLDAP server. The synchronization is working properly i.e. users in CUCM also exist in CUP. However, when I tried to login into Jabber, it keeps giving me "Invalid Username/Password" error. I tried logging into Cisco Unified CM User Options (<ip address>/ccmuser) using the same credentials and succeeded. However, I failed to login to Cisco Unified Presence User Options (<ip address>/cupuser).
Any help?
Thank you

I had this exact same issue. Mine was due to a failover. Users were all moved to one server so about half were not working. In CUPS go to System -> Cluster Topology and expand the cluster. Look for Red Xs indicating an issue. Click one where it gives the number of assigned users. Do any say "Failed Over" and have that check box? The ones that do not likely are getting this message of invalid UN/PW. You can test this by pointing the jabber client directly at the working server (the server their name is not under in Cluster Topology). If this is your scenario look for errors and then try clicking the cluster to get "Subcluster Detail" page and click the "Failover" button on the server that has that option. The red X should disappear and the users should be on their subsequent server again and thus should be able to log in.

Error when starting Firefox 3.6. "Javascript Application error. Invalid username/password combination. If you continue to get this error, try entering your email address as your username." Any suggestions on what to look for to resolve this?

When starting Mozilla Firefox 3.6, I get an error window which opens up additionally overtop my browser windows stating:
"Javascript Application"
followed with :
"Invalid username/password combination. If you continue to get this error, try entering your email address as your username."
Obviously it is happening with one of my email addresses/usernames & password combinations of which I know the username for (which I choose not to post here) and I'm not sure where to begin looking for a resolution to this problem.

I was able to resolve this by disabling (under Tools - Add-ons) Yahoo! Mail Notifier
Hope this helps some of you also!

Getting invalid username/password error while trying to create_queue_table

Here is how I get it.
connect / as sysdba
create user aq identified by aq
default tablespace users
temporary tablespace temp
quota unlimited on users;
grant connect,
create type,
create procedure,
aq_administrator_role
to aq;
grant execute on dbms_aq to aq;
grant execute on dbms_aqadm to aq;
begin
dbms_aqadm.grant_system_privilege('ENQUEUE_ANY','AQ',FALSE);
dbms_aqadm.grant_system_privilege('DEQUEUE_ANY','AQ',FALSE);
end;
connect aq/aq
create Type aq.message_typ as object (
subject Varchar2(30), text Varchar2(80)
begin
dbms_aqadm.create_queue_table(
queue_table => 'aq.objmsgs80_qtab',
queue_payload_type => 'aq.Message_typ',
multiple_consumers => true);
end;
Error at line 1:
ORA-01017: invalid username/password; logon denied
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2934
ORA-06512: at "SYS.DBMS_AQADM", line 58
ORA-06512: at line 2

In what version of Oracle?
I see a couple of problems assuming you are working with a currently supported version:
1. Never grant CONNECT to anyone: Ever. Grant CREATE SESSION.
2. GRANT CREATE TABLE to AQ;
Go to Morgan's Library at www.psoug.org and look at AQ Demo 1. You should have no problem cutting and pasting your way to where you are trying to go.

On starting up firefox i am getting an error message from javascript application telling me that my username is an invalid username/password combination.If i continue to get this error message,try entering my email address as my username.

Hi,on starting firefox which i have used solely as my browser for years i am now getting an error message from java script application that shows my username followed by a message saying; 'username'-Invalid username/password combination.If you keep getting this error,try entering your email address as your username'. I then press the OK button within that error message box and it dissapears and everything seems ok although hover my cursor over the mail(envelope) icon and it says not connected.
I only started having this problem since downloading firefox 4.It also does not tell me where this problem is occuring so i do not know where to log on with this information.I would be most grateful for any help with this matter.Many thanks.

Take a look in the Error Console for details about that.
Tools > Error Console <br />
Right-click the message and use '''Copy''' to get that complete message.

JAVA SCRIPT application: Invalid username/password combination. If you continue to get this error, try entering your email address as your username.

Every time I start up Firefox, I get the following:
JavaScript Application
"mfernandez1957" Invalid username/password combination. If you continue to get this error, try entering your email address as your username.
What do I do?
Another issue is hang ups, I mean every few seconds it hangs up and I get (Not Responding), which is frustrating when you're entering data or whatever and in the middle it freezes so then you have to go back and retype stuff that never got entered. It even hangs right out the gate, I get (Not Responding), I mean, before Firefox is even fully loaded, it hangs, it even hangs (though considerably less frequently) with all my plug ins currently disabled. So that's another issue.
If y'all can help, I would be grateful.

hello, please try to [[Reset Firefox – easily fix most problems|reset firefox]] and see if this can address the issue...

I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

See my answer to your previous duplicate question. What happened when you tried my answers?
LN

Entourage error "The server for my email acount returned the error "Login Failed". Your username/password or security settings may be incorrect. Would you like to try re-entering your password?"

I have 1 user on a Mac who just started having a pop up message when opening entourage "The server for my email acount returned the error "Login Failed".
Your username/password or security settings may be incorrect. Would
you like to try re-entering your password?" I know the settings are right because the users mail works on iPhone,iPad,an windows machine. I have deleted entourage plist and also tried a new user same message appears in new user.

See thread here:
https://discussions.apple.com/message/23175721#23175721
It worked for me.

In iPhoto, I am getting this error when trying to email a photo. "The email server didn't recognize your username/password combination."

I am trying to email a photo from iphoto using my gmail account. I am receiving this error that my email server doesn't recognize my username/password. I do have a different password for Gmail, should that matter? How can I correct this?

in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

I'm trying to email a photo from my iPhoto album, but I'm getting an error message that says "The email server didn't recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

I'm trying to email a photo from one of my iPhoto albums, however I'm getting an error message that says "The email server didn’t recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

Never mind. I was able to find the solution via an earlier post from West. Thank you!

When I try to send a photo by email, an error message reads "The email server didn't recognize your username/password combination" How do I fix this?

When I try to send a photo from iPhoto by email, and error message reads "The email server didn't recognize your username/password combination". How do I fix this?

Try to reenter you rmail account details in the iPhoto Preferences > Accounts tab.
Delete the mail account entry by pressing the "-" button below the left column in the panel, then add it again by pressing "+".
Also, it is recommended, to set "Mail" as mail client in the iPhoto preferences, and not iPhoto. This has been working much more reliably lately.

ERROR: ORA-01017: invalid username/password; logon denied

Hi all
I need your kind help.
I have installed Oracle Audit Vault Server Release 10.2.3.2 in Linux system and collection agent in Windows system. Adding and starting DBAUD collector went fine however adding REDO collector return back errors when executing avorcldb add_collector command as follow
[oracle@avsrv ~]$
[oracle@avsrv ~]$ avorcldb add_collector -srcname orcl -agentname avagent01 -colltype REDO -av Lugaopc:1521:orcl
collector REDO_Collector for source orcl already exists
initializing REDO Collector
ERROR: could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
ERROR: ORA-01017: invalid username/password; logon denied
[oracle@avsrv ~]$
Here is the contents of avorcldb.log file
09-09-13 16:58:44 [INFO ] Processing command add_collector
09-09-13 16:58:44 [INFO ] Processing arg -srcname = orcl
09-09-13 16:58:44 [INFO ] Processing arg -agentname = avagent01
09-09-13 16:58:44 [INFO ] Processing arg -colltype = REDO
09-09-13 16:58:44 [INFO ] Processing arg -av = Lugaopc:1521:orcl
09-09-13 16:58:44 [INFO ] Connect info : Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Got AV admin connection using jdbc:oracle:oci:@AVDB
09-09-13 16:58:45 [INFO ] Executing SQL as [ADM@AV] select s.host||':'||a1.num_value||':'||a2.char_value from avsys.av$attrvalue a1, avsys.av$attrvalue a2, avsys.av$source s, avsys.av$attrdef ad1, avsys.av$attrdef ad2 where source_name = :1 and a1.inst_id = s.source_id and a2.inst_id = s.source_id and a1.attr_id = ad1.attr_id and ad1.attr_name = 'PORT' and a2.attr_id = ad2.attr_id and ad2.attr_name = 'DB_SERVICE'
09-09-13 16:58:45 [INFO ] Using bind value orcl
09-09-13 16:58:45 [INFO ] Return value = Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Connect info : Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Executing SQL as [ADM@AV] select to_char(source_id) from avsys.av$source where source_name = :1
09-09-13 16:58:45 [INFO ] Using bind value orcl
09-09-13 16:58:45 [INFO ] Return value = 1
09-09-13 16:58:46 [INFO ] Got source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select decode(c.status, 1, 'active', 0, 'dropped', null) from avsys.av$collector c, avsys.av$source s where source_name = :1 and collector_name = :2 and c.source_id = s.source_id
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Using bind value REDO_Collector
09-09-13 16:58:46 [INFO ] Return value = active
09-09-13 16:58:46 [MESG ] collector REDO_Collector for source orcl already exists
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select decode(c.status, 1, 'active', 0, 'dropped', null) from avsys.av$collector c, avsys.av$source s where source_name = :1 and collector_name = :2 and c.source_id = s.source_id
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Using bind value REDO_Collector
09-09-13 16:58:46 [INFO ] Return value = active
09-09-13 16:58:46 [MESG ] initializing REDO Collector
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select username from avsys.av$source where source_name = :1
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Return value = AVSRCUSR1
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] {? = call avsys.dbms_audit_vault.reset_source_user(?)}
09-09-13 16:58:46 [INFO ] Adding mask for user password
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select table_name from user_tables where upper(table_name) = upper(:1)
09-09-13 16:58:46 [INFO ] Using bind value STREAMS_HEARTBEAT
09-09-13 16:58:46 [INFO ] Return value = STREAMS_HEARTBEAT
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop table streams_heartbeat
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create table streams_heartbeat( src_dbname varchar2(4000), job_number number, heartbeat_time timestamp)
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] declare dbs_name varchar2(4000); begin select global_name into dbs_name from global_name; insert into streams_heartbeat values (dbs_name, 0, SYSTIMESTAMP); end;
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create or replace procedure update_heartbeat IS begin update streams_heartbeat set heartbeat_time=(select systimestamp from dual); commit; end;
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select table_name from user_tables where upper(table_name) = upper(:1)
09-09-13 16:58:46 [INFO ] Using bind value CAPTURE_RULES
09-09-13 16:58:46 [INFO ] Return value = CAPTURE_RULES
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop table capture_rules
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create table capture_rules( rule_name varchar2(50), rule_scope varchar2(6), rule_type varchar2(3), obj_name   varchar2(100))
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select global_name from global_name
09-09-13 16:58:46 [INFO ] Return value = AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select db_link from user_db_links where db_link = :1
09-09-13 16:58:46 [INFO ] Using bind value AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Return value = AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop database link "AVDB.AVSRV"
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select version from v$instance
09-09-13 16:58:46 [INFO ] Return value = 11.2.0.1.0
09-09-13 16:58:46 [INFO ] Creating DB link using AVDB.AVSRV,AVSRCUSR1,{avsrcusr_pwd},Lugaopc,1521,orcl
09-09-13 16:58:46 [INFO ] Connecting as srcuser_ora01 to @(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:46 [INFO ] Output from SQLPlus
09-09-13 16:58:46 [INFO ]
09-09-13 16:58:46 [INFO ] Package created.
09-09-13 16:58:46 [INFO ]
09-09-13 16:58:46 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package body created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package body created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ] Executing SQL as [USR@SRC] select distinct name from user_errors where name = :1
09-09-13 16:58:47 [INFO ] Using bind value DBMS_SRC_STREAMS_COLLECTOR
09-09-13 16:58:47 [INFO ] Return value = null
09-09-13 16:58:47 [ERROR] could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:47 [ERROR] ORA-01017: invalid username/password; logon denied
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
    at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:765)
    at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:414)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
    at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:162)
    at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
    at java.sql.DriverManager.getConnection(DriverManager.java:525)
    at java.sql.DriverManager.getConnection(DriverManager.java:140)
    at oracle.av.avca.jdbc.JdbcConnection.<init>(JdbcConnection.java:87)
    at oracle.av.orcldb.DAO.initConnection(DAO.java:79)
    at oracle.av.orcldb.DAO.<init>(DAO.java:64)
    at oracle.av.orcldb.commands.AddCollector.setupCollector(AddCollector.java:746)
    at oracle.av.orcldb.commands.AddCollector.execute(AddCollector.java:230)
    at oracle.av.orcldb.Command.process(Command.java:89)
    at oracle.av.orcldb.Main.process(Main.java:118)
    at oracle.av.orcldb.Main.main(Main.java:132)
I have searched the forum to my level best without clear solution
Regards
Sadock

Hi gurus
I don't believe if this is missing solution from oracle community. I have decided to installed the collction agent and source database in linux system, so now both auditt vault server and collction agent are running in Linux system (but separately)
I am wondering, avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype DBAUD and avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype OSAUD -orclhome /u01/app/oracle/product/11.2.0/dbhome_1 are working fine and I am able to start these collectors
The avorcldb verify -src Lugaosrv:1521:ORCL.LUGAOSRV -colltype ALL command also return good results
[oracle@avsrv ~]$ avorcldb verify -src Lugaosrv:1521:ORCL.LUGAOSRV -colltype ALL
Enter Source user name: srcuser_ora01
Enter Source password:
source ORCL.LUGAOSRV verified for OS File Audit Collector collector
source ORCL.LUGAOSRV verified for Aud$/FGA_LOG$ Audit Collector collector
source ORCL.LUGAOSRV verified for REDO Log Audit Collector collector
[oracle@avsrv ~]$
The problem still I am facing is when attempting to add REDO collector. In fact the collector is added successful and i can see it even on EM console.
[oracle@avsrv ~]$ avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype REDO -av Lugaosrv:1521:ORCL.LUGAOSRV
source ORCL verified for REDO Log Audit Collector collector
Adding collector...
Collector added successfully.
remember the following information for use in avctl
Collector name (collname): REDO_Collector
initializing REDO Collector
ERROR: could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaosrv)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ORCL.LUGAOSRV)))
ERROR: ORA-01017: invalid username/password; logon denied
[oracle@avsrv ~]$
Any help will be appreciated
Sadock

SQLLDR Error Invalid Username/Password

I am trying to load some data using SQL*Loader. I used this statement: sqlldr RPTDBA/rptdba control=C:\myfile
I get the ORA-01017 error invalid username/password but I can log into SQL*Plus using that same username and password. I created the username using the Enterprise Manager Control. Is there something that I need to do so that SQL*Loader recognizes the username?
Thanks,
Veronica

I had not provided the service name before. Somehow, it must have assumed it. I tried using your syntax,
sqlldr RPTDBA/rptdba@RPTDB control=C:\myfile and it works!
Thanks.
V.
Try
sqlldr RPTDBA/rptdba@service_name control=C:\myfile
Don't you provide a service name when connecting to SqlPlus?
Mbo

Deployment error: ORA-01017: invalid username/password; logon denied

Hi,
I created a new target schema against an existing runtime owner user id and runtime access user id.
But deploying the mapping now gives error as follows:
<<ORA-01017: invalid username/password; logon denied>>
Can you please guide where the problem is?
Thanks & Regards,
Lenin

Hi,
Just to add some more informations about this topic. I created one extra target schema for the same runtime user id/runtime access user. And then tried to deploy the mapping and got the above error. And again, I removed the older target schema by using "OWB Runtime Assistant". And then tried to deploy mapping again and got the same error again.
Can you please help me out in this case?
Thanks & Regards,
Lenin

Cisco 1921 CCP discovery error username/password

Similar Messages

Maybe you are looking for