Cisco Historical Report no displays data after an CCX update

Hi team.
I have an issue with the Cisco Historical Report.
On December 14 we performed a version update of UCCX:
New Version 8.5.1.11004-25
Old Version 8.5.1.10000-37
Now I am informed by the Call Center Supervisor can not generate reports in the CHR with dates before 14 December.
When you request a report, for example, the 1st to March 31, 2012, the error "No report data to display the specified date range." (See attached image Cisco Historical Report (4). JPG).
When asked the same report, but from the 1st to 31 January 2013, the report is generated successfully and the Supervisor can see the data.
Anyone have idea why this happens?. You should not miss the update data to make and less with the UCCX server restart. Or can it?.
Thanks in advance.
Best regards.
Ernesto González

Similar Messages

Cisco Historical reports Data Mismatches

dear all
i need to ask you about cisco Historical reports, i am using UCCX 8.6 and CUCM 8.6
i am collecting data of calls presented handled and Abundant from these three reports:
ccdr Call detail
csq detail
call abandont detail
from all these reports data is different and difference is around 1000 calls of all month, abundant presented and handle all three are showing data mismatched,
Second question is which report i should use to get data of: presented calls, handled calls abundant calls and per agent abundant calls, please suggest
please help me to resolve this issue

Kindly read the following for better understanding of their relationship
a) UCCX Reporting Guide - Data reconciliation between reports
b) UCCX Report Developer Guide - Interpret Database Records
Thanks!
-JT-

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

SSRS report not displaying data in correct order

Guys,
I have a SSRS 2012 report not displaying returned records from SQL in the correct order. Running the stored procedure in SSMS and supplying the parameter values returns the data correctly and running Query Designer in SSRS using the stored procedure
on the dataset in question, likewise returns the data correctly. Only when I run the actual report does the data display incorrectly(always last name order). I've done similar reporting using very similar stored procedures and I've never had this
problem. Below is the stored procedure. "@SortBy" is the parameter with the sorting value. 1=Due Date; 2=Denial Amt and 3=Last name and is passed by SSRS to SQL. Wish I could supply screen shots.
Thanks for any help,
Dave
ALTER PROCEDURE [dbo].[RAC_PT_List]
@Level as int,
@SortBy as int,
@PTLName as varchar(30) = NULL,
@User as varchar(10) = NULL
AS
SELECT pat.headerID,
pat.PT_LName + ', ' + pat.PT_FName AS PTName,
pat.PT_AcctNo,
rco.RCO_CLMREF,
rco.RCO_AppealLevel,
rco.RCO_LevelNo,
rco.RCO_AuditorStatus,
let.LET_DEN_DueDate,
CONVERT(varchar(12),let.LET_DEN_DueDate) as DueDate,
let.LET_DEN_Dollars,
let.userID
FROM Master_PT_List pat
INNER JOIN Master_RCO_Work rco on RCO.PT_headerID = pat.headerID
INNER JOIN Master_Letters let on LET.PT_headerID = pat.headerID
WHERE (@PTLName IS NULL OR(pat.PT_LName LIKE + '%' + @PTLName + '%'))
AND (rco.RCO_LevelNo = @Level)
AND (let.userID = @User)
--AND (rco.RCO_AuditorStatus <> 'Closed' and rco.RCO_AdminStatus <> 'Closed')
ORDER BY
CASE WHEN @SortBy = '1' THEN LET_DEN_DueDate
END
DESC,
CASE WHEN @SortBy = '2' THEN let.LET_DEN_Dollars
END
DESC,
CASE WHEN @SortBy = '3' THEN pat.PT_LName
END

Hi DaveMac1960,
According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
Reference:
Sort Data in a Data Region (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Routing Report to display data in CA03

Hi Experts,
I am making a report that displays the routings of all materials. In the table PLPO, i can see all the informations of operations its hours. But if an operation is deleted in the routing master then the entry inthe table is not deleted. So when i diaplay the data in the report the delleted operation is also listed. How can i find in the table PLPO that which line is deleted. Is there any link with field ARBID.
Regards
SAPXPT

Hi,
You will have to read the valid routing operations from the table PLAS. Logic would be PLAS-LOEKZ should be blank.
Add the above into your program & you will be reading the relevant operations.
Regards,
Vivek

Can Cisco Historical Reports Report Average Hold Time for Incoming Calls?

Is the a way that Cisco Historical can report on the Average Hold Time for Incoming Calls? User is trying to figure out if there is a hold time prior to the agent picking up the call.
I am running CRS Historical Reports Versions 5.0 (2.5).

Hi,
You can check the link belowCisco Unified Contact Center Express 5.0 Historical Reporting Administrator and Developer Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_5_0/programming/hr_admin_devp/crs501hd.pdf
this document includes all the details regarding the reports and its cutomization.
Regards,
Trad

Question: using links in report to copy data into form for update

Hi there,
I have a report that selects data from one a table, and i want to populate a form to update the report info and more info that a user will enter into another table. With alot of help I have managed to get the first 3 column fields across by editing the report link, under report attributes -> column link. The values of Item 1 to Item 3 work fine, but how do i get the rest of the info in the other 5 columns across??
regards

I think you're trying to reinvent the htmldb wheel.
Have you tried looking at the wizards that help you do this?
Anyway, as an example, to populate the form using the pk
1: create your items on the page, including the PK
eg P2_EMPNO (PK), P2_ENAME, P2_SAL,P2_DEPTNO
2: create a page process "on load" that runs if the PK item is not null
begin
select ename,sal,deptno
into :P2_ENAME,P2_SAL,P2_DEPNTO
from emp
where empno = :P2_EMPNO
end;
3: You now need to write a process that does an update
after submit
begin
update emp
set ename = :P2_ENAME,
sal = P2_SAL,
deptno = :P2_DEPTNO
where empno = :P2_EMPNO;
end
You need to consider how to handle new rows, optimistic locking and a few other things.
I would suggest that you have a look at the existing form wizard that does all this for you. We can then work around any "limitations" you find.
Chris

App did not Restore Data after iOS 4 update on 3G

One App - Magic Pad , a note App failed to restore all my notes after my G3 updated to iOS 4? None of the notes restored. These are mostly important Business / Technical notes and I need them badly, any suggestions are appreciated.
Pete

I was able to fix the issue. I had to manually put the phone in restore mode by holding the power button and the home button until the power turned off while the phone was still plugged into the computer, then when the phone turned off continue holding the home button until you hear the computer recognize the device. Then navigate to the back up folder that is described earlier and cut out all of the back up folders and paste them on your desktop. Then iTunes said that a device was recognized in restore mode or something like that and you click yes to restore. After this happen the iPhone will go through the processes of restoring the phone. When it finishes it will start like a brand new device and it will be updated to the OS4.0. You will then need to go through the tabs at the top of the iPhone sync window and re check all of the items that you want synced to your phone. The only data that was totally lost was my pictures, but after the iPhone finishes reloading, you may be able to go back to the desktop and cut the backup folders and paste them back into the backup folder and restore your phone from a previous back up and you may still be able to recover those photos. This worked for me so I hope it works for all of you as well. Thanks!

Is there any way to save my data after i have updated my phone and backed it up first

Is there any way to retrive or save my data after updating my phone and its locked, asking to restore to original settings in itunes.

If there is a passcode on your iPhone, which you don't know, there is no way around it. You'll have to restore factory settings. The passport is meant to protect sensitive data, and that is, what it does.

Oracle Report: columns display one after another.

Hello
I have a report that has 10 columns. I want all of the rows of first set of 5 columns to display then the second set of 5 columns will display after that. for example
Date range 1/1/07 to 1/5/07
col1 col2 col3 col4 col5
AA BB CC DD CCC
AA VV DDD DD XXX
Date range 1/6/07 to 7/10/07
col6 col7 col8 col9 col10
AA BB CC DD CCC
AA VV DDD DD XXX

Hallo,
In the sense of Applicatin Express you have two Report Regions.
Both regions can be dependent on a master item (e.g. SELECT ... WHERE MASTER_ID = :MASTER_ITEM)
Hope that helps, Willi

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

Report not displaying data in Viewer

Hi All,
I have a problem, wherein when I run a report on Discoverer Desktop or Plus the report runs fine (with data displayed) but when the same report is run from Discoverer Viewer the report does not fetch any data. It does not even give the error of 'No rows returned'.
If there are any settings or any other change that needs to be done, please help.
This is again something very urgent i am looking for. An immediete help will be really appreciated.
Regards,
Shruti

Hi,
what is the version of Discoverer you are using?
Also, Is this workbook created in previous versions and upgraded to the existing version?
log entries in application.log would help in debugging. If you are facing any difficulty to look at the log entires being huge,
Make sure that you clear or take a backup of the existing application.log, restart the middletier. This will create a fresh application.log file.
Now, immediately reproduce your issue.This will record the exact log for the event which Viewer is failing to render the report.
Hope this helps!
Cheers,
Prasad Bolla.

Role analysis report not displaying data

Hi experts,
I'm trying to get data out of all reports from the dashboard and so far all of them work except for the Role Analysis report. When I execute the report all information comes blank and under "Number of Roles Analyzed" shows 0. Is there any way to farther test this report? I see a lot of information on the community but mainly the solutions are "execute job sycn" and check parameter 1025 for default ruleset. Is there any other thing I can do to get results here?
Note: I also try generating all roles, running an all system risk analysis and just fyi SOD is working for User and Role level.

Screen is attach, as far as steps go well after running Authorization Synch, Repository Synch and Action Usage Synch from SPRO I went to NWBC ->Reports & Analytics and under Access Dashboards I click on "Role Analysis" and I get the attach screen. All the other reports under Access Dashboards works (except for "Alerts") but Im guessing thats because I dont have any alerts or something like that. Any help is always appreciated

BPM reporting not displaying data for newly added field

Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please help

Hi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit

SSRS Report Viewer display issues after KB2888505 and now KB2898785

After patch KB2888505 both IE 9 and IE 10 started displaying cropped images with horizontal scroll bars when viewing SSRS Reports.  These reports functioned and fit the screen without scroll bars prior to this patch and returns
to normal once the patch is uninstalled.  There is no compatibility mode icon in the address bar and I have tried all browser modes in the F12 Developer Tools Menu with no change. Rolling back KB2888505 was a temp fix for my
users until KB2898785 was installed reverting back to the same cropped reports with the scroll bar. The only versions of IE in my environment are 9 and 10 and upgrading to 11 is not an option at this time. Others have reported this same issue so
maybe we can get more visibility on TechNet.

Hi,
These two KB include too many Individual updates. It's hard to figure out which exact update lead to this issue.
If you make sure the issue is caused by these updates package. The simple and easier way is to uninstall them.
Karen Hu
TechNet Community Support

Cisco Historical Report no displays data after an CCX update

Similar Messages

Maybe you are looking for