Cisco IOS Syslog Messages

Does anyone have a link that shows all the Cisco IOS syslog messages?
Such as this one for the ASA?
http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/syslog.html
Thanks in advance.

This guide should give you what you want.
http://www.cisco.com/en/US/docs/ios/system/messages/guide/consol_smg.html

Similar Messages

  • Cisco MARS Syslog messages

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    Hi,
    I've recently noticed that ALL the syslog messages that are sent to our Cisco MARS device are then being sent to our syslog server. Besides the messages from our MARS device, the syslog server also gets the original syslog messages from our ASA and PIX firewalls (which, of course, also send to our MARS device). I would like to have MARS send syslog messages to the syslog server that pertain only to changes/events happening directly to the MARS device. Can anyone help me with this?
    Thanks in advance!

    Kerry;
      To have CS-MARS specific incidents forward to your syslog server, you will most likely want to add an action to generate a syslog for the CS-MARS-specific inspection rules.  These rules can be found by navigatng to:
    RULES>Inspection Rules
    from the Group: drop-down choose "System: CS-MARS Issues"
      You can then edit the Action: section for the specific rules (one at a time) to add a syslog action.  Specifics are outlined here:
    http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/alerts.html
    Scott

  • Syslog Messages Location

    Hello All
    Cans someone please show me where I can find the full list of cisco's syslog messages? At the moment I can only find the full list related to ASA's. However, I would like to see the full list of syslog messages for, say, OSPF.
    Cheers
    Carlton

    I believe events parsed by Sylsog analyzer are stored in the RME db. The default location on Solaris is at
    /opt/CSCOpx/databases/rme/rmeng.db
    Configurations are stored in the shadown directory (if enabled in the GUI). On Solaris the default location is at
        /var/adm/CSCOpx/files/rme/dcma/shadow
    Reference.
    Message was edited by: Marvin Rhoads - corrected RME db location - thanks Afroj.

  • Cisco ASA Connection Denied syslog messages

    Hi,
    Could you please provide the connection denied syslog messages, I'm not able to differentiate the messages from syslog guide
    Regards,
    Shalendra

    Hi Shalendra,
    For TCP connection denied syslog , 106001 is the id.
    For protocol denied connection, 106002 is the id.
    For connection denies due to logging permit-hostdown policy, 414006 is the id.
    Refer to this link:
    http://www9.cisco.com/c/en/us/td/docs/security/asa/syslog-guide/syslogs/logsevp.html#13063
    Regards,
    Shrinkhala

  • Cisco EEM script to detect a sequence of SYSLOG messages

    Hi,
    I am trying to create an EEM "Port-knocking" script which should act upon an ordered sequence of SYSLOG messages. The SYSLOG messages are generated by some "deny tcp any any XXX log STRING" ACLs, applied to the outside interface. 
    Here is what I have already tried:
    ! <------- BEGIN ------->
    ip access-list extended INTERNET
    deny tcp any any eq 1234 log OPEN_SEQUENCE_A
    deny tcp any any eq 1235 log OPEN_SEQUENCE_B
    deny tcp any any eq 1236 log OPEN_SEQUENCE_C
    event manager environment 1ST_MATCH 0
    event manager environment 2ND_MATCH 0
    event manager applet ONE
    event syslog pattern "OPEN_SEQUENCE_A"
    action 1 set 1ST_MATCH "1"
    action 2 syslog msg "DETECTED SEQUENCE A!"
    event manager applet TWO
    event syslog pattern "OPEN_SEQUENCE_B"
    action 1 if $1ST_MATCH eq 1
    action 2 set 2ND_MATCH "1"
    action 3 syslog msg "DETECTED SEQUENCE B!"
    action 4 end
    event manager applet THREE
    event syslog pattern "OPEN_SEQUENCE_C"
    action 1 if $1ST_MATCH eq 1
    action 2 if $2ND_MATCH eq 1
    action 3 syslog msg "DETECTED SEQUENCE C!"
    action 4 syslog msg "PORT KNOCK SUCCESSFUL! UNLOCKING!..."
    action 5 end
    action 6 end
    ! <------- END ------->
    In the above I am somehow trying to "chain" the syslog events, yet I do not seem to be able to pass any information between the applets.
    Any comments are highly appreciated.
    Cheers,
    David

    EEM cannot detect syslog messages that it generates.  If you want to chain together events across multiple applets, use application-specific events.  For example:
    action 2 publish-event sub-system 798 type 1
    event application sub-system 798 type 1
    action 3 publish-event sub-system 798 type 2
    You can also pass up to four arguments as well if you need additional context.

  • Cisco PI syslog server configuration

    Hi all,
    I need to configure the PI as syslog server and get the log file from the PI to read it ??
    how can I do it, please advice
    thanks in advance

    Hi,
    Which prime version are you using ?
    Here is what Prime 2.1 user guide says
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/user/guide/pi_ug/alarms.html#pgfId-1054572
    Prime Infrastructure logs all emergency, alert, and critical messages generated by all devices that are managed by Prime Infrastructure.
    Prime Infrastructure also logs all SNMP messages and syslogs it receives. To view syslogs, choose Operate > Alarms & Events , then click the Syslogs tab.
    Syslog Predefined Filters
    Prime Infrastructure uses the following syslog filters:
    Severity 0 and 1
    Severity 2
    Environmental Monitor
    Memory Allocation Failure
    Catalyst Integrated Security Features
    Cisco IOS Firewall Denial of Service
    Read this thread as well, it talks about tweak this setting, but it could leads to fill up your prime disk space quickly.
    https://supportforums.cisco.com/discussion/11645481/prime-infrastructure-12-syslog
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Cisco Devices Syslog monitoring and user monitoring tools

    Can anyone help me how to monitoring syslog and users log (which command use specific user). if any software or hardware need for this purpose we will purchace it. note that our network running all cisco devices (router, switch, ASA etc) and more then 200 devices are in our network.
    thanks.

    Configuring Cisco Devices to Use a Syslog Server
    Most Cisco devices use the syslog protocol to manage system logs and  alerts. But unlike their PC and server counterparts, Cisco devices lack  large internal storage space for storing these logs. To overcome this  limitation, Cisco devices offer the following two options:
    Internal buffer— The device's operating system  allocates a small part of memory buffers to log the most recent  messages. The buffer size is limited to few kilobytes. This option is  enabled by default. However, when the device reboots, these syslog  messages are lost.
    Syslog— Use a UNIX-style SYSLOG protocol to send  messages to an external device for storing. The storage size does not  depend on the router's resources and is limited only by the available  disk space on the external syslog server. This option is not enabled by  default.
    TIP
    Before configuring a Cisco device to send syslog messages, make  sure that it is configured with the right date, time, and time zone.  Syslog data would be useless for troubleshooting if it shows the wrong  date and time. You should configure all network devices to use NTP.  Using NTP ensures a correct and synchronized system clock on all devices  within the network. Setting the devices with the accurate time is  helpful for event correlation.
    To enable syslog functionality in a Cisco network, you must configure the built-in syslog client within the Cisco devices.
    Cisco devices use a severity level of warnings through emergencies to  generate error messages about software or hardware malfunctions. The  debugging level displays the output of debug commands. The Notice level  displays interface up or down transitions and system restart messages.  The informational level reloads requests and low-process stack messages.
    Configuring Cisco Routers for Syslog
    To configure a Cisco IOS-based router for sending syslog messages to  an external syslog server, follow the steps in Table 4-11 using  privileged EXEC mode.
    Table 4-11. Configuring Cisco Routers for Syslog
    Step
    Command
    Purpose
    1
    Router# configure terminal
    Enters global configuration mode.
    2
    Router(config)# service timestamps type datetime [msec] [localtime] [show-timezone]
    Instructs the system to timestamp syslog messages; the options for the type keyword are debug and log.
    3
    Router(config)#logging host
    Specifies the syslog server by IP address or host name; you can specify multiple servers.
    4
    Router(config)# logging trap level
    Specifies the kind of messages, by severity level, to be  sent to the syslog server. The default is informational and lower. The  possible values for level are as follows:
    Emergency: 0
    Alert: 1
    Critical: 2
    Error: 3
    Warning: 4
    Notice: 5
    Informational: 6
    Debug: 7
    Use the debug level with caution, because it can generate a large amount of syslog traffic in a busy network.
    5
    Router(config)# logging facility facility-type
    Specifies the facility level used by the syslog messages; the default is local7. Possible values are local0, local1, local2, local3, local4, local5, local6, and local7.
    6
    Router(config)# End
    Returns to privileged EXEC mode.
    7
    Router# show logging
    Displays logging configuration.
    Note
    When a level is specified in the logging trap level command, the router is configured to send messages with lower severity levels as well. For example, the logging trap warning command configures the router to send all messages with the  severity warning, error, critical, and emergency. Similarly, the logging trap debug command causes the router to send all messages to  the syslog server. Exercise caution while enabling the debug level.  Because the debug process is assigned a high CPU priority, using it in a  busy network can cause the router to crash.
    Example 4-12 prepares a Cisco router to send syslog messages at  facility local3. Also, the router will only send messages with a  severity of warning or higher. The syslog server is on a machine with an  IP address of 192.168.0.30.
    Example 4-12. Router Configuration for Syslog
    Router-Dallas#
    Router-Dallas#config terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Router-Dallas(config)#logging 192.168.0.30
    Router-Dallas(config)#service timestamps debug datetime localtime show-timezone
       msec
    Router-Dallas(config)#service timestamps log datetime localtime show-timezone msec
    Router-Dallas(config)#logging facility local3
    Router-Dallas(config)#logging trap warning
    Router-Dallas(config)#end
    Router-Dallas#show logging
    Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
        Console logging: level debugging, 79 messages logged
        Monitor logging: level debugging, 0 messages logged
        Buffer logging: disabled
        Trap logging: level warnings, 80 message lines logged
            Logging to 192.168.0.30, 57 message lines logged
    Configuring a Cisco Switch for Syslog
    To configure a Cisco CatOS-based switch for sending syslog messages  to an external syslog server, use the privileged EXEC mode commands  shown in Table 4-12.
    Table 4-12. Configuring a Cisco Switch for Syslog
    Step
    Command
    Purpose
    1
    Switch>(enable) set logging timestamp {enable | disable}
    Configures the system to timestamp messages.
    2
    Switch>(enable) set logging server ip-address
    Specifies the IP address of the syslog server; a maximum of three servers can be specified.
    3
    Switch>(enable) set logging server severity server_severity_level
    Limits messages that are logged to the syslog servers by severity level.
    4
    Switch>(enable) set logging server facility server_facility_parameter
    Specifies the facility level that would be used in the message. The default is local7.  Apart from the standard facility names listed in Table 4-1, Cisco  Catalyst switches use facility names that are specific to the switch.  The following facility levels generate syslog messages with fixed  severity levels:
    5: System, Dynamic-Trunking-Protocol, Port-Aggregation-Protocol, Management, Multilayer Switching
    4: CDP, UDLD
    2: Other facilities
    5
    Switch>(enable) set logging server enable
    Enables the switch to send syslog messages to the syslog servers.
    6
    Switch>(enable) Show logging
    Displays the logging configuration.
    Example 4-13 prepares a CatOS-based switch to send syslog messages at  facility local4. Also, the switch will only send messages with a  severity of warning or higher. The syslog server is on a machine with an  IP address of 192.168.0.30.
    Example 4-13. CatOS-Based Switch Configuration for Syslog
    Console> (enable) set logging timestamp enable
    System logging messages timestamp will be enabled.
    Console> (enable) set logging server 192.168.0.30
    192.168.0.30 added to System logging server table.
    Console> (enable) set logging server facility local4
    System logging server facility set to
    Console> (enable) set logging server severity 4
    System logging server severity set to <4>
    Console> (enable) set logging server enable
    System logging messages will be sent to the configured syslog servers.
    Console> (enable) show logging
    Logging buffered size: 500
    timestamp option: enabled
    Logging history size: 1
    Logging console: enabled
    Logging server: enabled
    {192.168.0.30}
    server facility: LOCAL4
    server severity: warnings(4
    Current Logging Session: enabled
    Facility            Default Severity          Current Session Severity
    cdp                 3                         4
    drip                2                         4
    dtp                 5                         4
    dvlan               2                         4
    earl                2                         4
    fddi                2                         4
    filesys             2                         4
    gvrp                2                         4
    ip                  2                         4
    kernel              2                         4
    mcast               2                         4
    mgmt                5                         4
    mls                 5                         4
    pagp                5                         4
    protfilt            2                         4
    pruning             2                         4
    radius              2                         4
    security            2                         4
    snmp                2                         4
    spantree            2                         4
    sys                 5                         4
    tac                 2                         4
    tcp                 2                         4
    telnet              2                         4
    tftp                2                         4
    udld                4                         4
    vmps                2                         4
    vtp                 2                         4
    0(emergencies)        1(alerts)              2(critical)
    3(errors)             4(warnings)            5(notifications)
    6(information)        7(debugging)
    Console> (enable)
    Configuring a Cisco ASA for Syslog >
    http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/monitor_syslog.html
    You can get a free copy of Syslog server from here
    http://www.kiwisyslog.com/free-edition.aspx
    Hope it helps!!
    Regards

  • ISE 1.1.3 en Cisco IOS SCEP

    Hi,
    I'm running Cisco ISE 1.1.3.124 and a Cisco IOS 2811 (c2800nm-spservicesk9-mz.150-1.M2.bin) which I configured the be a SCEP server.
    PKI Authentication and enrollment of a Cisco switch with this SCEP server is running well but BYOD clients enrollment via EAP-TLS (1024/2048) giving me the following error on the Cisco IOS SCEP server:
    SCEP#
    .Mar 17 15:21:59.446: Sun, 17 Mar 2013 15:21:59 GMT 10.0.0.164 /cgi-bin/pkiclient.exe ok
            Protocol = HTTP/1.1 Method = GET Query = operation=PKIOperation&message=MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgU
    AMIAGCSqGSIb3DQEHAaCAJIAEggPoMIAGCSqGSIb3DQEHA6CAMIACAQAxggEvMIIBKwIBADATMA4xDDAKBgNVBAMTA2lzZQIBA
    TANBgkqhkiG9w0BAQEFAASCAQAmbK6WZ5L6gw+uh7h4Qi53XL76QsBNcY8E6cMxWDp8hWbLvujNOylSvJLF
    .Mar 17 15:21:59.446:
    .Mar 17 15:21:59.454: CRYPTO_CS: received a SCEP request, 3652 bytes
    .Mar 17 15:21:59.454: CRYPTO_CS: read SCEP: registered and bound service SCEP_READ_DB_10  
    .Mar 17 15:21:59.482: CRYPTO_CS: scep msg type - 19
    .Mar 17 15:21:59.482: CRYPTO_CS: trans id - 9871e81c65121310b77df8b341c7c887a5392da2
    .Mar 17 15:21:59.486: CRYPTO_CS: failed to open env data
    .Mar 17 15:21:59.486: CRYPTO_CS: read SCEP: unregistered and unbound service SCEP_READ_DB_10  
    .Mar 17 15:21:59.486: CRYPTO_CS: failed to read SCEP request
    .Mar 17 15:21:59.502: Sun, 17 Mar 2013 15:21:59 GMT 10.0.0.164 /cgi-bin/pkiclient.exe ok
    SCEP#
    I'm stuck now on the message: failed to open env data. So can anyone explain what the meaning is of this message or maybe know if IOS SCEP with ISE is supported ?
    Thanks in advance.
    greetz Michel
    btw the tracelog of the switch enrollment with IOS SCEP is below:
    SCEP#
    .Mar 17 14:57:10.932: Sun, 17 Mar 2013 14:57:10 GMT 10.0.0.161 /cgi-bin/pkiclient.exe ok
            Protocol = HTTP/1.0 Method = GET Query = operation=PKIOperation&message=MIIGWgYJKoZIhvcNAQcCoIIGSzCCBkcCAQExCzAJBgUrDgMCGgUAMIIDAAYJKoZI
    hvcNAQcBoIIC8QSCAu0wggLpBgkqhkiG9w0BBwOgggLaMIIC1gIBADGBujCBtwIB
    ADAgMBsxGTAXBgNVBAMTEGNhLndlc3R3aWp6ZXIubmwCAQEwDQYJKoZIhvcNAQEB
    BQAEgYAo/LNaINm+tcgzF8V8d7d5x
    .Mar 17 14:57:10.932:
    .Mar 17 14:57:10.936: CRYPTO_CS: received a SCEP request, 2210 bytes
    .Mar 17 14:57:10.940: CRYPTO_CS: read SCEP: registered and bound service SCEP_READ_DB_1   
    .Mar 17 14:57:10.948: CRYPTO_CS: scep msg type - 19
    .Mar 17 14:57:10.948: CRYPTO_CS: trans id - 59D142A6D0F525668626A435229BAAF1
    .Mar 17 14:57:11.040: CRYPTO_CS: read SCEP: unregistered and unbound service SCEP_READ_DB_1   
    .Mar 17 14:57:11.040: CRYPTO_CS: received an enrollment request
    .Mar 17 14:57:11.040: CRYPTO_PKI: creating trustpoint clone ise1
    .Mar 17 14:57:11.040: CRYPTO_CS: checking policy for enrollment request ID=1
    .Mar 17 14:57:11.040: CRYPTO_CS: request has been authorized, transaction id=59D142A6D0F525668626A435229BAAF1
    .Mar 17 14:57:11.040: CRYPTO_CS: locking the CS
    .Mar 17 14:57:11.040: CRYPTO_CS: added CDP extension
    .Mar 17 14:57:11.044: CRYPTO_CS: added key usage extension
    .Mar 17 14:57:11.044: CRYPTO_CS: Validity: 13:57:11 UTC Mar 17 2013-13:57:11 UTC Oct 3 2013
    .Mar 17 14:57:11.128: CRYPTO_CS: writing serial number 0x2.
    .Mar 17 14:57:11.180: CRYPTO_CS: file opened: nvram:ise.ser
    .Mar 17 14:57:11.180: CRYPTO_CS: Writing 32 bytes to ser file
    .Mar 17 14:57:13.864: CRYPTO_CS: reqID=1 granted, fingerprint=2
    .Mar 17 14:57:13.864: CRYPTO_CS: unlocking the CS
    .Mar 17 14:57:13.864: CRYPTO_CS: write SCEP: registered and bound service SCEP_WRTE_DB_1   
    .Mar 17 14:57:13.984: CRYPTO_CS: write SCEP: unregistered and unbound service SCEP_WRTE_DB_1   
    .Mar 17 14:57:13.988: CRYPTO_CS: Certificate generated and sent to requestor
    .Mar 17 14:57:13.988: CRYPTO_CS: removing trustpoint clone ise1

    Michel,
    Officially supported it is not:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud86973
    Some people mentioned varios degrees of "having it working".
    In your case it's the envelope data which appears to be a problem for IOS.
    M.

  • ACS appliance1120 ACS 4.2.1.15 syslog message to syslog server

    Hi All ,
             I am using ACS 1120 appliance running ACS version 4.2.1.15 , I am pointing out all syslog message to my external syslog server (passed authentication , failed authentication , database replication , administration aduit ,tacacs accounting )  , but i could recieve only passed authentication log message to my external log server , no other log message except passed authentication is pushed to my external log server , But i could see failed attempts , database replication,administrtation audit log message locally on my acs appliance as CSV file ,
    Syslog server configuration is configured under all logging (passed , failed , administration , tacacs accounting ) , but i am surprise to see only passed authentication logg is sent out from acs appliance , Is there any patch to be installed for logg message scripting ?? , please advise ..

    Refer the link : https://supportforums.cisco.com/discussion/11513026/migrating-acs-420-421
    you can directly upgrade from 4.2.0.124 to 5.6 : http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/user/guide/acsuserguide/migrate.html#98379

  • CUCM Syslog Message ISSUE (kernel: Exceeded hashlimit)

    Hello.
    Our Customer using CUCM 9.0 (PUB :1 , Sub : 4) and 4 Voice Gateway Cisco 3945 (16 E1 PRI per each Gateway)
    CUCMs have problem with syslog messages.
    I saw these messages in rtmt syslog
    - kernel:  Exceeded hashlimit IN=bond0 OUT= MAC=34:40:b5:d5:63:e8:1c:e6:c7:52:44:40:08:00 SRC=130.1.254.27 DST=130.1.13.11 LEN=204 TOS=0x00 PREC=0x00 TTL=246 ID=19646 PROTO=UDP SPT=19200 DPT=30546 LEN=184
    kernel:  Exceeded hashlimit IN=bond0 OUT= MAC=6c:ae:8b:67:1a:28:bc:16:65:12:99:7f:08:00 SRC=130.1.254.27 DST=130.1.14.13 LEN=204 TOS=0x18 PREC=0xA0 TTL=253 ID=42621 PROTO=UDP SPT=26694 DPT=26842 LEN=184
    What's the problem with these messages ?
    And how can I solve this problem
    Thanks.

    I used to have the same problem, it was a sip trunk against to one CME, just reset the sip trunk in CUCM it fixed the error. it is because the end poing is sending a lot of requests to CUCM

  • Unterstanding syslog messages from our wlc

    Hello,
    we use two wlc 4402 (4.1.181.0) and several leightweight accesspoints (AIR-AP1010-E-K9 and AIR-AP1030-E-K9 ) connected to them.
    On our syslog server we get a lot of messages from the two wlc, and there are 3 message types which I am a little bit afraid of.
    1. ca. 10 times per hour we get the message
    apf_80211.c:4792 APF-6-NO_CONFIG_CHANGES: Not saving 'apf.cfg' - no config changes."
    Cisco system message guide:
    Error Message %APF-6-NO_CONFIG_CHANGES: Not saving '[chars]' - no config changes.
    Explanation Not saving - no config changes.
    Recommended Action No action is required.
    Does anybody know why we get this messages and if it's possibly to suppress them?
    2. Intermittently (several times a day) we get the following message types:
    a) [ERROR] spam_l2.c 723: Max retransmissions reached on AP 00:0B:85:56:63:40 (CONFIGURE_COMMAND^M , 2)"
    b) [ERROR] spam_tmr.c 569: Did not receive hearbeat reply from AP 00:0b:85:56:ae:40"
    The MAC address is not every time the same but one of our accesspoints.
    On our network management system we get the following trap messages with nearly exactly the same timestamp:
    14.01.2008 04:21:56 CET
    AP ''00.0b.85.56.63.40'', interface ''0x1'' is down.
    When Airespace AP's interface operation status goes down this trap will be sent.
    bsnAPDot3MacAddress = 00.0b.85.56.63.40
    bsnAPIfSlotId = 0x1
    14.01.2008 04:21:56 CET
    AP disassociated from Switch.
    When an Airespace AP disassociates from a Airespace Switch, the AP disassociated notification will be sent with the dot3 MAC address of the Airespace AP. This will notify the management system to remove Airespace AP from this Airespace Switch.
    bsnAPMacAddrTrapVariable =
    14.01.2008 04:22:25 CET
    AP associated with Switch.
    When an Airespace AP Associates to a Airespace Switch, the AP associated notification will be sent with the dot3 MAC address of the Airespace AP. This will help the management system to discover the Airespace AP and add it to system.
    bsnAPMacAddrTrapVariable =
    bsnAPPortNumberTrapVariable = 1
    Cisco system message guide:
    a) Error Message %LWAPP-3-TX_ERR3: Max retransmissions for LWAPP control message reached on AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] for [chars] (number of pending messages is [dec])
    Explanation Maximum number of times an LWAPP control packet is transmitted before declaring the AP dead has been reached for this AP. The AP may not be on the network, or might have rebooted.
    Recommended Action Check if the AP has rebooted or if it has been removed from the network, or if there are connectivity issues between the AP and the controller.
    b) Error Message %LWAPP-3-ECHO_ERR: Did not receive heartbeat reply; AP: [hex]:[hex]:[hex]:[hex]:[hex]:[hex]
    Explanation Controller did not get a response for the AP heartbeat message. There may be connectivity issues between the AP and the controller.
    Recommended Action Check if the AP has rebooted or if it has been removed from the network, or if there are connectivity issues between the AP and the controller.
    Because we don't see any network problems I'm wondering why the connection is lost.
    Does anybody have an idea, perhaps CSCsh13928 (http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsh13928, but we don't have much traffic on the wlans) ?
    Is there any possibility to remotely check if the accesspoint rebooted?
    If you need further information please give me a short feedback.
    Many thanks in advance,
    Thorsten Steffen

    Thanks for the help.
    I have set up to send email and syslog messages from the RME applications. LMS server immediately started to send messages to the email server but syslog messages are not forwarded to the syslog server. Everything was done according to your instructions except that the name of the first script (syslog_forward.pl) is made consistent with what the second script (.bat) refer to (forward1.pl). What's the problem?  Do RME sends the standard syslog messages via UDP port 514?
    Sincerely.

  • LMS 4.2 not processing syslog messages

    I have a new install of LMS 4.2 on a virtual appliance.  No syslog messages are getting into LMS.  They are being received by the server, but are showing up in /var/adm/CSCOpx/log/dmgtd.log, and aren't getting processed by SyslogAnalyser.
    Here's the syslog.conf file:
         local6.info                                                                     /var/log/ade/ADE.log
         *.info;mail.none;news.none;authpriv.none;cron.none;local0.none;local1.none      /var/log/messages
         authpriv.*                                                                      /var/log/secure
         mail.*                                                                          -/var/log/maillog
         cron.*                                                                          /var/log/cron
         *.emerg                                                                         *
         uucp,news.crit                                                                  /var/log/spooler
         local7.*                                                                        /var/log/boot.log
         #Application LMS Generated config
         #BEGIN CSCOmd - DO NOT EDIT THESE COMMENTS OR CONTENTS CONTAINED WITHIN - local0 1
         local0.emerg;local0.alert;local0.crit;local0.err;local0.warning;local0.notice;local0.info;local0.debug  /var/adm/CSCOpx/log/dmgtd.log
         #END CSCOmd DO NOT EDIT BEFORE THIS LINE  1
         local7.info  /var/log/syslog_info
    My guess is that the incoming messages are getting written to the wrong file.  What do I need to change to correct this?

    I found that all of my syslog messages were being captured under /var/log/messages.  This was due to my Cisco devices being configured with "logging facility local5".  Instead of reconfiguring all of my devices to log to facility local7, I just changed the following line in syslog.conf and restarted (/etc/init.d/syslog restart)
    Before:
    local7.info  /var/log/syslog_info
    After:
    local5.*  /var/log/syslog_info
    Probably not the best way to do it, but it worked for me.
    -Rick

  • Syslog messages not showing

    Hello,
    I have a newly installed LMS 4.1 that had the Syslog feature working for a while.
    Recently, the Syslog is no longer displaying any records (neither new or old messages).
    Below are the steps I have tried to troubleshoot the problem:
    - Installed wireshark : Syslog messages are being received by the LMS server on time
    - In the Syslog.log file, I can see that all the Syslog messages are being logged properly
    - I tried to disable all the "Syslog Message Filters" but nothing changed
    In the SyslogCollector.log, I can find the below logs:
    NMSROOT is C:/PROGRA~2/CSCOpx
    propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
    Unable to find the file C:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
    NMSROOT is C:/PROGRA~2/CSCOpx
    propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,673, Logging System Initialized.
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,674, System Initialized.
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,684, Queue Cap 100000
    SyslogCollector - [Thread: main] WARN , 04 Mar 2013 14:54:45,468, Unable to resurrect connection to a subscriber.
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:45,491, Service started...
    I am not sure what to check now. Kindly your suggestions.
    Thanks,
    Justine.

    Hello,
    I have a newly installed LMS 4.1 that had the Syslog feature working for a while.
    Recently, the Syslog is no longer displaying any records (neither new or old messages).
    Below are the steps I have tried to troubleshoot the problem:
    - Installed wireshark : Syslog messages are being received by the LMS server on time
    - In the Syslog.log file, I can see that all the Syslog messages are being logged properly
    - I tried to disable all the "Syslog Message Filters" but nothing changed
    In the SyslogCollector.log, I can find the below logs:
    NMSROOT is C:/PROGRA~2/CSCOpx
    propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
    Unable to find the file C:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~2\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
    NMSROOT is C:/PROGRA~2/CSCOpx
    propFileC:/PROGRA~2/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,673, Logging System Initialized.
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,674, System Initialized.
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:38,684, Queue Cap 100000
    SyslogCollector - [Thread: main] WARN , 04 Mar 2013 14:54:45,468, Unable to resurrect connection to a subscriber.
    SyslogCollector - [Thread: main] INFO , 04 Mar 2013 14:54:45,491, Service started...
    I am not sure what to check now. Kindly your suggestions.
    Thanks,
    Justine.

  • Receive syslog messages from remote system

    I want to replace my ancient and aging Slackware 12.0 server with an Arch server. One of the hurdles is to receive syslog messages (UDP/IP, port 514) over the network from a Cisco 678 DSL modem/router, and from a DD-WRT based wireless access point.
    How do I go about getting a systemd-based Arch server to receive syslog-formatted messages from the network on UDP port 514?
    I'm not looking to view the Arch system's journal over the network, but rather to receive non-local messages and log them.
    Last edited by bediger4000 (2013-08-01 15:44:48)

    WonderWoofy: I hope you mean "man systemd-journal-gatewayd", as I find that man page, but not "systemd-journal-gateway".  systemd-journal-gatewayd works the other way. According to the man page it "serves journal events over the network. Clients must connect using HTTP."
    sbmomeni: I agree that your reference says the systemd journal provides the same function - but how?  And does "this functionality" refer to the logging part of syslog-ng, or to the receiving messages from other machines part?

  • Cisco Prime syslog server

    Where are syslogs stored, if I point my devices to Cisco Prime acting as my syslog server? I am running 2.0
    thanks, Jerry

    Hi ,
    As of now , this feature is not available , I mean PI will not work as syslog server.
    Syslog messages received by  PI from managed devices are found under Monitor > Alarms and Events > Syslogs
    as you are using PI 2.2 , you will be able to see all device syslog messages (0-7 severity)
    That display will show you up to 200,000 messages at a time.
    Check the below link for other related details proved by Marvin :
    https://supportforums.cisco.com/discussion/12486126/cisco-prime-syslog-functionality#sthash.Wbj2a3lj.dpuf
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

Maybe you are looking for

  • Problem in CATS_DA Report output

    Hi Friends. Few days back I added one custom field in CI_CATSDB structure to bring additional field in CAT2 screen.Its working fine and reflected the field in CATSDB table also. But when I run CATS_DA Report, I can able to view the field in developme

  • Deserializing a file not serialized using Java

    Hello , I am trying to deserialize and read a file which has been previously serialized using VC++. Is there a way to read a file serialized by VC++ using Java. When i read using ObjectInputStream, exception is thrown (StreamCorruptedException). The

  • Publish projects in batch mode

    I have 9 projects that I need to re-publish on a regular basis. Can I do this in batch mode. Publishing each one individually gets old real fast. Please let me know, Scott

  • Missing contacts and photo on n96

    Hello all  I have noticed today that some of my contacts have gone missing and nearly all of my photo's are showing as corrupt. I haven't installed anything recently that I am aware of I haven't updated FW as I am on the latest but yet this has reall

  • FLV big size

    I have a 3 GB Quicktime film. I need to compress it and display a text under the film. FLV seems to be the right format. But I got a 45MB FLV-file after compression at 400 bps. This film is targeted towards children. They probably can have a low conn