Receive syslog messages from remote system

I want to replace my ancient and aging Slackware 12.0 server with an Arch server. One of the hurdles is to receive syslog messages (UDP/IP, port 514) over the network from a Cisco 678 DSL modem/router, and from a DD-WRT based wireless access point.
How do I go about getting a systemd-based Arch server to receive syslog-formatted messages from the network on UDP port 514?
I'm not looking to view the Arch system's journal over the network, but rather to receive non-local messages and log them.
Last edited by bediger4000 (2013-08-01 15:44:48)

WonderWoofy: I hope you mean "man systemd-journal-gatewayd", as I find that man page, but not "systemd-journal-gateway".  systemd-journal-gatewayd works the other way. According to the man page it "serves journal events over the network. Clients must connect using HTTP."
sbmomeni: I agree that your reference says the systemd journal provides the same function - but how?  And does "this functionality" refer to the logging part of syslog-ng, or to the receiving messages from other machines part?

Similar Messages

  • Can't get syslog messages from Remote SA520 over VPN

    I'm trying to set up a central logging server on a debian system running rsyslog.
    The syslog server is local & I have a branch office connected via a VPN. Both buildings have SA520 routers.
    I have set up both firewalls to allow ANY from each network 192.168.150.X & 19.168.160.X
    (also tried to add a rule for UDP514 but that didn't help)
    The debian system is new & has no iptables set up
    I've entered the syslog server IP in remote logging.
    I've set up facilities in Send to syslog for both routers.
    I am logging messages from the local router but don't see anything from the remote.
    I've checked with wireshark & see no syslog packages from the remote (I do see SSL negotiation & others when using the web admin and of course the functioning vpn)
    I rebooted the router to see if that mae a difference but no luck.
    Any ideas why I can't get the syslog traffic across the VPN?

    I do have the correct IP address of the syslog server set up. I do not want email logs so have not enabled that.
    My setup is
    remote lan > SA520-remote (192.168.160.1) > [ site to site IPSec VPN over WAN ] > SA520-local (192.168.150.1) > syslog server (192.168.150.25) & local lan
    Firewall is set up to allow ANY IN & OUT to local lan on both routers.
    I have also set up specific rules for UDP 514 Syslog traffic (no difference, currently disabled)
    syslog server has -no- firewall at the moment.
    Syslog server is receiving messages from the local router with no issues.
    Log Severity is set to Information &  Log Facility is set up to send to Syslog.
    I have also setup a SNMP trap on the syslog server & pointed the remote router to it in hopes of diagnosing the issue.
    Both routers have the latest firmware applied.
    Using wireshark on the syslog server I see no traffic on UDP 514 (syslog) or UDP 162 (snmp)
    I can use the WUI for the remote & ping the 160.1 with no problem. Both ping & TLS/TCP traffic show up in wireshark on the syslog server when I do so.
    It looks to me like there is a problem routing the syslog messages out of the router & then back through the VPN.
    Worst case I'll set up another syslog server on an old machine at the remote location & then cron the logs to the central syslog server but it really seems I shouldn't have to.

  • Receiving zfs snapshots from remote system

    Hi guys,
    if you create zfs snapshots on systemA and then send them to systemB, how do you recover the snapshots from systemB back to systemA?
    Thanks guys .

    The same way, just do a send/receive from B to A. But that would create a new filesystem, not get you the snapshot within the original zfs back.
    cheers
    bjoern

  • Keep receiving messages from FSS.system.notice.urg...

    Keep receiving messages from FSS.system.notice.urgent.us.  
    Anyreason why?  Cannot find explainations.

    Hi, Plastic, and welcome to the Community,
    But my question is this, This is a brand new account (2 days old) set up only on a skype phone. I have told no one my skype name, so how did the caller know my name to call?
    Question: When you set up your new Skype account, did the Skype app on your phone provide the option to secure your account via setting the privacy settings to permit incoming audio calls, video calls, and instant messages from people on your contact list only?   If not, please sign on via a laptop or computer to do this.  Remember to Save your settings as you proceed through the screens/windows.
    It's not like they can randomly guess a skype name.
    Yes, they can.
    How are our details stored?
    Please refer to these FAQ articles for explanation: https://support.skype.com/en/faq/FA143/is-skype-se​cure and https://support.skype.com/en/faq/FA31/does-skype-u​se-encryption
    Can wild characters be used in skype calls?
    If you mean something like an "*" such as in a database search, then, no.
    No one should be able to call my skype number unless I tell them my ID or chose to use something easily guessed, and then even if this was the case, within two days?
     If you secure your account and profile (do not specify a gender; leave location and other settings which default to "Public" neutral or blank), then your Skype account should not be easily found.
    Skype has significantly reduced the number of ways other Skype users can find their friends, colleagues, and so on, but still allows for general searches based on only four Add a Contact features: Skype name, full name, e-mail address, or telephone number input in the Profile.   Your new Skype account fell into the scammer's random search parameters.
    Also, why does Skype allow user names that include system.notice? This would seem to me words that should be reserved for system notices, or am I missing something here?
    Yours is a valid point which I have read many times - however, these titles are only titles such as how you might change your name as it appears in your Profile settings; the scammers constantly change the underlying Skype account names they use.  Please see this FAQ article for the details of a Skype name vs. a display name: https://support.skype.com/en/faq/FA110/can-i-chang​e-my-skype-name
    Securing your account should rid you of these nuisance messages as well as unsolicited contact invitations.
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Unterstanding syslog messages from our wlc

    Hello,
    we use two wlc 4402 (4.1.181.0) and several leightweight accesspoints (AIR-AP1010-E-K9 and AIR-AP1030-E-K9 ) connected to them.
    On our syslog server we get a lot of messages from the two wlc, and there are 3 message types which I am a little bit afraid of.
    1. ca. 10 times per hour we get the message
    apf_80211.c:4792 APF-6-NO_CONFIG_CHANGES: Not saving 'apf.cfg' - no config changes."
    Cisco system message guide:
    Error Message %APF-6-NO_CONFIG_CHANGES: Not saving '[chars]' - no config changes.
    Explanation Not saving - no config changes.
    Recommended Action No action is required.
    Does anybody know why we get this messages and if it's possibly to suppress them?
    2. Intermittently (several times a day) we get the following message types:
    a) [ERROR] spam_l2.c 723: Max retransmissions reached on AP 00:0B:85:56:63:40 (CONFIGURE_COMMAND^M , 2)"
    b) [ERROR] spam_tmr.c 569: Did not receive hearbeat reply from AP 00:0b:85:56:ae:40"
    The MAC address is not every time the same but one of our accesspoints.
    On our network management system we get the following trap messages with nearly exactly the same timestamp:
    14.01.2008 04:21:56 CET
    AP ''00.0b.85.56.63.40'', interface ''0x1'' is down.
    When Airespace AP's interface operation status goes down this trap will be sent.
    bsnAPDot3MacAddress = 00.0b.85.56.63.40
    bsnAPIfSlotId = 0x1
    14.01.2008 04:21:56 CET
    AP disassociated from Switch.
    When an Airespace AP disassociates from a Airespace Switch, the AP disassociated notification will be sent with the dot3 MAC address of the Airespace AP. This will notify the management system to remove Airespace AP from this Airespace Switch.
    bsnAPMacAddrTrapVariable =
    14.01.2008 04:22:25 CET
    AP associated with Switch.
    When an Airespace AP Associates to a Airespace Switch, the AP associated notification will be sent with the dot3 MAC address of the Airespace AP. This will help the management system to discover the Airespace AP and add it to system.
    bsnAPMacAddrTrapVariable =
    bsnAPPortNumberTrapVariable = 1
    Cisco system message guide:
    a) Error Message %LWAPP-3-TX_ERR3: Max retransmissions for LWAPP control message reached on AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] for [chars] (number of pending messages is [dec])
    Explanation Maximum number of times an LWAPP control packet is transmitted before declaring the AP dead has been reached for this AP. The AP may not be on the network, or might have rebooted.
    Recommended Action Check if the AP has rebooted or if it has been removed from the network, or if there are connectivity issues between the AP and the controller.
    b) Error Message %LWAPP-3-ECHO_ERR: Did not receive heartbeat reply; AP: [hex]:[hex]:[hex]:[hex]:[hex]:[hex]
    Explanation Controller did not get a response for the AP heartbeat message. There may be connectivity issues between the AP and the controller.
    Recommended Action Check if the AP has rebooted or if it has been removed from the network, or if there are connectivity issues between the AP and the controller.
    Because we don't see any network problems I'm wondering why the connection is lost.
    Does anybody have an idea, perhaps CSCsh13928 (http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsh13928, but we don't have much traffic on the wlans) ?
    Is there any possibility to remotely check if the accesspoint rebooted?
    If you need further information please give me a short feedback.
    Many thanks in advance,
    Thorsten Steffen

    Thanks for the help.
    I have set up to send email and syslog messages from the RME applications. LMS server immediately started to send messages to the email server but syslog messages are not forwarded to the syslog server. Everything was done according to your instructions except that the name of the first script (syslog_forward.pl) is made consistent with what the second script (.bat) refer to (forward1.pl). What's the problem?  Do RME sends the standard syslog messages via UDP port 514?
    Sincerely.

  • Error while processing message to remote system

    Hi,
    I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
    I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
    Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
    Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
    The previous thread relating this is:
    Process Integration (PI) & SOA Middleware
    Requesting for a solution.
    Regards,
    Raghavendra

    Hi,
    >>><i>So i tried creating a RFC(using sm59)in the R/3,
    When i try to import the RFC i have created, I am not able to see the one i have created.</i>
    In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
    This will enable your RFC to be called by an application outside the R/3 system.
    >>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
    You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
    You are not able to find your RFC since it has not been remotely enabled or has not been activated.
    Regards,
    Smitha.

  • File to RFC - error while processing message to remote system:com.sap.aii.

    Hi
    i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      Screen output without connection to user.    
    Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      Screen output without connection to user.   
    It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
    But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
    could anyone help.

    Hi
    I am Facing  Following Error When I am trying to call SAP Screen through JCO.jar
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
    Please Guide Whethere it is possible to call SAP screen Through JCO.jar  ot NOT
    Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
    Thanks
    Vivek

  • Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • My MDB keep receiving the message from the WLS 7.0

              The attachment is my onMessage method in MDB. On the send side, I sent out my message.
              But one MDB side, I keep receiving new message from TOPIC for each 40 seconds.
              Do you guys know what is wrong?
              public void onMessage(Message msg) {
              try {
              Thread thisThread = Thread.currentThread();
              try {
              System.out.println( "[Start]: " + thisThread.toString() );
              while( true) {
              thisThread.sleep( 1000 );
              System.out.println( "[     ]: " + thisThread.toString() );
              System.out.println( "[Exit ]: " + thisThread.toString() );
              catch ( java.lang.InterruptedException ie ) {
              ie.printStackTrace();
              catch(JMSException ex) {
              ex.printStackTrace();
              

    Try using the installer(s) from http://forums.adobe.com/thread/909550

  • Trouble receiving international messages from one specific number

    I cannot receive international text messages from my dad’s phone who lives in the Czech Republic (Vodafone provider) since 12/2014.  There were no issues prior to that date, and he did not change his provider. I can receive text messages from other phones also serviced by Vodafone in the Czech Republic. I can successfully send text messages to phones in the Czech R., including my dad’s, and he can successfully send messages to other cell phones in the US. Simply put, every combination works just fine except for one direction from his phone to mine. I have iPhone 6+, iOS 8.3, and I am not blocking his number (Settings/Messages/Blocked). I troubleshot this issue with Vodafone, and they swear that his messages reach the US.  I deleted my dad’s contact and put it back, did not help. Any ideas what it could be? Thank you so much,Dudley

    Hey there
    I’m sorry to hear you have been unable to text your dad! We certainly need to help get this sorted out as soon as possible. What we can do is research our systems to see if there have been any issues on our end receiving those texts. Can you please send me a private message by Clicking Here and include the following information?
    Full name
    Cell number
    Dad’s number
    Best time to reach you
    Thanks!
    Charise

  • I can call out but all incoming calls are going directly to VM with no signal that I missed a call or have VM. I can send/receive text messages from other iPhone/iPad/iTouch users, I am assuming this is really "iMessage." Is it apple software?

    I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
    Problems: Suddenly ALL  incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive)  other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
    Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem  solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
    I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before.  Where is Steve Jobs when we need him?

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • LG Revolution not receiving text messages from iphone user

    I am not receiving text messages from iphone user, sporatically.  The messages are showing as reveived on Verizon website in usage detail, but not being received on my phone.

        This issue needs fixed asap! I have a few suggestions that should help you get this resolved. If they are showing up in the usage details, that means they are hitting the Verizon network, but for some reason they are not showing up on the phone.   I recommend clearing the cache from your messaging/text messaging programs. Go to settings> applications> manage apps> all> Messaging/Text Messaging> Force Stop/Clear Cache/Clear Data. Erase the old text threads that you have saved and retry.
    If that doesn't work, please let us know the following:
    1) Do they come in delayed or not at all?
    2) Do you have any 3rd party messaging apps installed?
    3) Do they have any problems receiving messages from you?
    4) When they're sending messages, are they directly to you, or do you have this problem when the iPhone user sends to a group of people?
    Thanks for the additional info! I'm sure we can find a fix.
    Regards,
    MikeS_VZW
    Follow us on Twitter @VZWSupport

  • TS4268 I CAN NOT RECEIVE TEXT MESSAGES FROM PEOPLE USING IMESSAGE - I HAVE MY IMESSAGE TURNED OFF BECAUSE I DO NOT WANT TEXTS GOING TO ALL MY ACCOUNTS - HOW DO I RESOLVE THIS PLEASE HELP - MISSING SEVERAL IMPORTANT COMMUNICATIONS...

    I CAN NOT RECEIVE TEXT MESSAGES FROM PEOPLE USING IMESSAGE

    On an iPhone your iMessages will go to your phone number.
    You can select another email to use on iPod or iPad.
    Go to settings
    Messages
    Send and receive
    Check your phone number and uncheck the common Apple ID you share so your messages will not go to other devices.

  • HT4061 I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    http://support.apple.com/kb/TS5185

  • Service Desk - Create Message from Satellite System

    Hi Guru,
    I'm learning SAP Solution manager service desk tools (on EHP1 SP22). I've managed to activate it and I can create the message from satellite system (with SLFN as default transaction type). Is it possible to change default of transaction type while creating support message from satellite system (e.g. using ZSLF, etc)?
    Appreciate for your input.
    Thanks and Regards,
    Yan

    Yes. It is very much possible.
    Use transaction - SPPFCADM
    select the row - DNO_NOTIF
    click on - Define action profile and action
    Select the action profile - SLFN0001_STANDARD_DNO
    Select the action - SLFN0001_STANDARD_DNO_CRM
    in processessing type, change the container value to ZSFN.
    Hope this will be helpful.
    Regards
    K.Kumar

Maybe you are looking for