Cisco NAM 5.0 API

Hi,
What all API's are exposed by cisco NAM 5.0 for data extractiom from it's embedded database.

Most if not all NDE collectors do include their own database. So, yes, that would be another database. The NAM CSV export feature does allow you to specify custom date ranges and get periodic exports in either CSV or HTML format. You can view these reports prior to sending them by first clicking the Export button, then click the Preview button. For example, here is a preview of the Application traffic report for SNMP for a day's worth of traffic:
Application,snmp
Time From,Sat, 18 Jun 2011 15:54
Time To,Sun, 19 Jun 2011 16:09
Application Traffic
Time,Bytes/sec,Packets/sec
Sat, 18 Jun 2011 16:00,1,769,9
Sat, 18 Jun 2011 17:00,1,893,10
Sat, 18 Jun 2011 18:00,1,683,9
Sat, 18 Jun 2011 19:00,1,690,9
Sat, 18 Jun 2011 20:00,1,702,9
Sat, 18 Jun 2011 21:00,1,726,9
Sat, 18 Jun 2011 22:00,1,669,9
Sat, 18 Jun 2011 23:00,1,684,9
Sun, 19 Jun 2011 00:00,1,695,9
Sun, 19 Jun 2011 01:00,1,734,9
Sun, 19 Jun 2011 02:00,1,682,9
Sun, 19 Jun 2011 03:00,1,686,9
Sun, 19 Jun 2011 04:00,1,706,9
Sun, 19 Jun 2011 05:00,1,734,9
Sun, 19 Jun 2011 06:00,1,672,9
Sun, 19 Jun 2011 07:00,1,681,9
Sun, 19 Jun 2011 08:00,1,683,9
Sun, 19 Jun 2011 09:00,1,735,9
Sun, 19 Jun 2011 10:00,1,670,9
Sun, 19 Jun 2011 11:00,1,690,9
Sun, 19 Jun 2011 12:00,1,692,9
Sun, 19 Jun 2011 13:00,1,738,9
Sun, 19 Jun 2011 14:00,1,669,9
Sun, 19 Jun 2011 15:00,1,706,9
Sun, 19 Jun 2011 16:00,1,730,9
Thu, 01 Jan 1970 00:00,,
Top N Hosts - Traffic In
Host,Bytes/sec
14.32.100.30,92
172.18.123.238,163
14.32.15.2,244
14.32.12.17,285
14.32.15.1,332
Top N Hosts - Traffic Out
Host,Bytes/sec
14.32.15.1,163
172.18.123.238,173
14.32.15.101,198
172.18.123.174,224
14.32.12.17,310
Application Configuration
Protocol,Port,Bytes/sec
UDP,161,1,643

Similar Messages

Cisco PI 2.0 API - GET Device Interface Description

Hi,
we are using Cisco Prime Infrastructure 2.0 as our central device discovery and inventory for all network equipment. Then we export the database to multiple other systems, primary through the REST API. My question is if anyone have used the PI API to retrive a device interface descriptions?
Looking at the documentation at https://[prime IP]/webacs/api/v1/data/InventoryDetails?_docs you'll see under the value PhysicalPort[] a description field, but it seems like it only get the port name i.e. FastEthernet1/1. Basically the same as the Name field.
Do anyone know how to get the description on an interface through the Cisco PI 2.0 API?
Cheers // Mattias

Because you would think that GET InventoryDetails -> PhysicalPort -> Description would be it... but no, it shows exactly the same thing as "name"!?
PhysicalPort[]
physicalPort
This nested field provides information about the physical ports associated with this device.
Type
Attribute Name
Description
String
description
The port description (i.e. Fast Ethernet Port, etc.).
long
deviceId
An internal id to recognize the device, which is the id of the associated management network element associated with this device.
long
equipmentId
The ID of the equipment object that this port is contained in.
String
name
The name of the port.
String
residingModule
The module that contains the port.
String
vendorEquipmentType
The vendor equipment type.

TACACS+ Authentication For Cisco NAM

Hi All,
I have an cisco ACS v5.1 and also a cisco NAM. Currently, I have configured TACACS+ on the NAM and the ACS v5.1 however when I try to access the NAM, the ACS v5.1 has an error message of "TACACS+ authentication ended with error" and I am not able to access the equipment.
For your information, I have no problem with others equipment TACACS+ authentication with the same ACS.
Please advise.
Thks and Rgds

Steven
I would first suggest that you verify that your ACS has an appropriate and correct entry configured for the NAM as a client. Assuming that is correct then I would suggest that you check and verify that the NAM is originating its TACACS requests from the address that you configured for the client on the ACS and that the shared secret is the same on both devices.
If those are correct then I would suggest to look in the Failed Attempts report of ACS and see if it provides a better identification of the problem.
HTH
Rick

How to get cluster name with c++ API?

Hi everyone,
I want to get cluster name with c++ API, do you know how to do that?
Thanks very much!!!
Guangyin

937347 wrote:
Hi Robert,
For Java, we can get the cluster name like this:
cache.getCacheService.getCluster().getClusterName(),
for c++, just as you said, do you mean that i can try to get cluster name like this:
Sting::View name = cache->getCacheService()->getInfo()->getServiceName();
InvocationService::handle invocation = cast<InvocationService::handle>(CacheFactory::getService(name));
String clusterName = invocation->getInfo()->getServiceName();
But i can not get the right result.
I know little about how to use InvocationService, could you give me example?
Thanks very much!!!
GuangyinHi Guangyin,
I do not know the C++ API, I never used it, but what you wrote definitely does not look right.
InvocationService is a way to send arbitrary Java logic (you need to write both the Java logic and a C++ counterpart class, the C++ class will serialize itself with POF and the Java class will deserialize the same data appropriately) as a command to the cluster via the TCP*Extend connection and the command would execute on the proxy node and thus it would have access to the cluster itself.
You probably should start with the documentation of the Coherence*Extend C++ API documentation for samples.
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/toc.htm
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/cpp_part.htm#CHDHCIEJ
Best regards,
Robert

Cisco NAM - Capabilities

Hello All,
I'm looking for features of NAM 3.0 which may help on daily operational basis, below are few questions regarding the same:
1. Can NAM give real time data showing which IP addresses are connected to a particular server?
2. Can it provide details of which protocol is abruptly disconnecting between two end-points?
3. If I deploy Cisco NAM at my data centre in HQ, how would it help me monitor my traffic at remote sites, or does it help at all in this regards?
4. Can it differentiate between traffic coming from load balancers, WAN optimizers, SSL devices, etc apart from regular endpoints like servers, desktops?
5. I'm guessing it already does, but just wanted to know if NAM gives complete details of all ports active on a server and which protocols, clients connected to it?
6. Does it show real time traffic between two endpoints like two hosts on different remote sites?
Thank you.
Regards,
Adnan

NAM, NAM1, NAM2, NAM SoftAppliance, NAM WAAS Blade or NAM Appliances are hardware denominators. Each new hardware release brings new chipsets, designs and hardware capabilities to NAM.
But majorly, all features depends on the software version you are using, either NAM Software 4.x or 5.x.
As an example, it is like using a Windows Software on a old single processor or a new Quad-core processor, features may remain same. However, some of the selective features does depend on Hardware as well, but mostly the robust hardware adds performence.
The latest NAM3 has following architecture:
•Two high-performance CPUs with hardware-based packet acceleration offering greater than 10 Gigabit Ethernet monitoring performance, 24 GB RAM, 600 GB SATA hard disk drive, mini SAS, and 10 Gigabit Ethernet external storage interface, and 1 Gigabit Ethernet management interface
• 20 gigabit interface to backplane for Switched Port Analyzer (SPAN)/VLAN access control list (VACL) capture data sources, NetFlow, encapsulated remote SPAN (ERSPAN), Cisco WAAS, and Cisco Performance Agent (PA) data sources
For more details on NAM3 please visit this link:
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps11659/data_sheet_c78-655374.html
-Thanks

Unable upgrade cisco NAM

Hi guys!
I have next problem:
I have cisco NAM server (Catalyst 6509 with module WS-SVC-NAM-2). I want install upgrade for 6.0.2 version but I get next error:
upgrade ftp://[email protected]/c6svc-nam.6-0-2.bin.gz
Downloading the image...
Password for [email protected]:
ftp://[email protected]/c6svc-nam.6-0-2.bin.gz (170786K)
- [############# ] 95734K | 11448.08K/swrite: No space left on device
426 Connection closed; aborted transfer of "/c6svc-nam.6-0-2.bin.gz"
Image download failed. Exiting...
Upgrade with <ftp://[email protected]/c6svc-nam.6-0-2.bin.gz> failed (1)
Can anybody help me?
Thanks

I can't believe no one has replied to you yet. I'm sure you've figured it out by now, but for those who are searching: the disk on the NAM device was full. You know how on the NAM you have your hard drive for all the data that's collected, but that's not where the OS for it resides. It resides on a flash card. That's probably like a 128MB card, and it's full. Typically in this situation you have to remove the old version of the software from flash before you ftp the new image up there. Now be careful with this because if you are not positive that you have the correct image, you could be temporarily bricking your device. By erasing the old image before loading the new one you're going to have the risk that if it doesn't work that you won't have an image to recover from. So typically you want to FTP the current image down to a computer where you can store the old image, until you're sure the new one works.

How to define the Java Resource Name with Consolidator API

Hi everybody,
I want to create a JavaResource with the OracleLite Consolidator API. There is a method ConsolidatorManager.createJavaResource(jarName, className, replace) which provides this, but it does not allow to explicitelly set the object name for this resource. That means, that if I want to create a JavaResource from the jar archive located in C:/temp/MyArchive.jar with the following call:
cm.createJavaResource("C:/temp/MyArchive.jar", null, true);
it automatically takes the whole path (i.e. C:/temp/MyArchive.jar) as the ResourceName. That is really not practical, especially if the path is longer.
Is there some method, which enables to specify the name for the Resource? Or maybe some method which can change an object name for the specified object type?
Thank you in advance,
Filip

i use
Desformat= SPREADSHEET
Destype= CACHE
web.show_document(/reports/rwservlet/getjobid<jobid>?server=ReportServer,_blank);
with a 'name' as getjobid<jobid>
desname doesn't work in CACHE - Mode ?
with
Desformat= SPREADSHEET
Destype= FILE
Desname= my_variable_report_name.xls
there is the file my_variable_report_namet.xls saved on host-file-system
ok, but can I call this with my_variable_report_name from cache without to save it everytime on server before ?

How to get the Class name of an API method?

Like most of us, it's difficult to know where every method within a Java class is. Also, many of the same methods are scattered throughout Java Classes. I know of two methods that retreive this... getClass().getName(). But, you must have an object to use these. Is there a way to find out what Class contains a method or Class variable thru an Applet or Java Application?? Obviously, I can look at API Docs; but this takes time.
Tks Randy

RajEndiran wrote:
Can anyone please let me know how we can get the class name of a page or region in oracle apex?What do you mean with class name? The name of the template (e.g. the css style class name)?
I would also like to know how we get the DOM object ID for particular item.Use firebug or inspect the source code of the rendered page to see the object IDs. Other then then, the typical ID of page items is the name of the item. For regions you can set your own ID.

Cisco Prime 2.2 API maxResults parameter

Dear Mr Cisco,
Concerning the maxResults parameter in an URL, is it possible to surpass 100, or is this the absolute maximum ?
Using the API, we would like to extract all clients (wired & wireless), there are 50000+ clients, so this results in a lot of queries !!
So, is it possible to surpass 100 or is it possible to change a certain parameter so it could be possible to do queries with more than 100 entries ?
Thanks in advance,
Lieven Stubbe
Belgian railways

You can thin provision. Trying to change the overall profile though will most likely result in issues sooner or later. When you run out of disk space it will fail in ungraceful ways.

Cisco NAM 2204 Appliance Problem

Hi,
I wanna seen port utilization for Cisco 3750 with NAM 2204. What can i do this configuration in NAM and 3750?
Thanks.

I have copy&paste the error message in the web search and I did get a bunch of hits on this, all related to Linux. The NAM is build on a Linux kernel, so it is obviously related to it but I didn't found a good hint what really caused the issue, just a couple of suggestions. One thread described how to change some settings in grub.conf which is not soltion for you:
http://www.cyberciti.biz/faq/linux-kernel-uhhuh-nmi-received-for-unknown-reason-30/
In couldn't find an entry for this in Ciscos' bug tool, so I would say, its time to open a TAC service request with Cisco (or your partner) or just try to reload the module and see if you get it back working....

Receiving Automatic calls from "CISCO" name continuously

We have installed one Cisco SX20 VC in our office last week only. Since then we are receiving auto call with name Cisco with no ip address.
Everyday approx. 250 calls we are getting on VC.
VC Network Configuration: Configured with Public static IP address, we don't have firewall in network and using as a standalone VC.
Product:
Cisco TelePresence SX20
Software version:
TC7.3.0.8cb420c
Can someone please help me to fixed this issue ASAP.
Regards,
Wajid Dabir

This has been covered quite a few times already, take a look at this thread; https://supportforums.cisco.com/discussion/12340591/nuisance-h323-calls-sx20 and https://supportforums.cisco.com/discussion/12336591/sourceh323idcisco-incomingcalls and https://supportforums.cisco.com/discussion/12472426/rogue-calls-expressway-e-can-they-be-blockeddropped for starters.
Not much you can do about it unless you put your system on a private address behind a gatekeeper etc.
You can at least avoid the SIP version of these scans by at least turning off SIP listening port, or turning SIP off all together unless you really need it. But no such luck when it comes to these h.323 scans.
/jens
Please rate replies and mark question(s) as "answered" if applicable.

How to get all GroupSpaces name using Spaces API, irrespective of user logged in?

Hi
Can anyone please tell me, how to retrieve list of all group spaces using Spaces API. I have used this method getGroupSpaces(null) to retrieve all group spaces, however it returns only the logged in members groups.
Is there any way to get all groupspaces details?
Regards
Raj

i don't think so other than admin user can get all group spaces informaiton, is it possible in webcenter portal:spaces default deployment?

Tildes in Field Names for REST API

In spanish, the term "Description" is translated as "Descripción".
So, I have a field name 'Descripción' in a SharePoint List. Internally, Sharepoint stores the name as 'Descripci_x00f3_n'. Ok.
But I don't know why I can't search by this field using any of the following URI's:
http://myhost:myport/_api/Web/Lists/GetByTitle('myList')/Items?$filter=Descripci_x00f3_n eq 'sometext'
http://myhost:myport/_api/Web/Lists/GetByTitle('myList')/Items?$filter=Descripci%f3n eq 'sometext'
http://myhost:myport/_api/Web/Lists/GetByTitle('myList')/Items?$filter=Descripción eq 'sometext'
I obtain the same HTTP error: 400 Bad Request.
any suggestions?

Hi,
Please use the following URI to check whether the issue would still occurs.
http://myhost:myport/_api/Web/Lists/GetByTitle('myList')/Items
If the issue wouldn’t occurs, use the following URI to try it, it working fine in my test environment.
http://myhost:myport/_api/Web/Lists/GetByTitle('myList')/Items?$filter=Descripci%5Fx00f3%5Fn eq 'sometext'
You can also check the field type, use a text field to try it.
Best Regards
Dennis Guo
TechNet Community Support

Identifying application name using Portal API

Hi
I have a Web Dynpro Java component that is being used in two different applications. I'm just wondering if there's a way to programmatically tell which application it was that called the component when a user enter certain input?
Regards,
Revathi Raju.

Hi Revathi Raju
There is no such API. If you need such information in your component you have to organize the logic by yourself. There are several possible ways to add such logic to the child component:
1. Use interface method with parameter which identifies a parent. Example: setMode(String mode). Parent component must invoke setMode() with concrete value.
2. Use several interface windows (interface views). Each interface view will mean specific use case of your component. Interface view's inbound plugs will help you to store the application mode in your component. Parent will embed the concrete interface view. The method also allows to provide different view layouts for each parent. In in other case it requires some routine work to clone the view layouts.
3. Use single interface view, but with several inbound plugs. Parent component will fire the concrete plug.
Personally I like the last methods the most, because it postpones the component mode determination to the WebDynpro navigation phase.
BR, Siarhei

Cisco nam 2204 performance evaluation

Hi,
We are planning export 500 Netflow of ISR G2 to a NAM2204-RJ45 appliance.
But I Cannot find information about NAM2204-RJ45 Netflow Data Export performance.
Can someone share user experience?

The 2204 is an appliance with 4 gigabit ports where the ISR is a module with two ports.
2204 data sheet:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5740/ps5688/ps10113/data_sheet_c78-655535.html
ISR data sheet:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5740/ps11658/data_sheet_c78-655516.html

Cisco NAM 5.0 API

Similar Messages

Maybe you are looking for