Cisco SCE 2020 and SNMP
I am trying to figure out how to retrieve the output of the comannd "show party all-names" via SNMP.
Does anybody have some suggested OID strings I could try?
here is my sh ver:
sce1#sh ver
System version: Version 3.6.0 Build 716
Build time: Mar 28 2010, 12:34:53 (Change-list 600192)
Software version is: Version 3.6.0 Build 716
Cryptography class: K9
Hardware information is:
rx : 0x0079
dp : 0x1d08
tx : 0x1712
ff : 0x0077
cls : 0x1e05
cpld : 0x0025
lic : 0x0202
lic-drv : 0x02020000
lic-prm : 0x02020000
rev : G001
Bootrom : 2.1.0
L2 cache : Samsung 0.5
lic type : 4GBE
optic mode : MM
Product S/N : CAT1425G00V
Product ID : SCE2020-4XGBE-MM
Version ID : V04
Deviation :
Part number : 800-26601-08
Revision : C1
Software revision : G001
LineCard S/N : CAT1422G00Z
Power Supply type : AC
SML Application information is:
Application file: /tffs0/release_.sli
Application name: Engage SML Version 3.6.0 build 126 (Protocol Pack 21 build 24)
Using Lib - PL_V3.6.0PP_B24
Using Lib - Classifier_V3.6.0_B24
Application help: Entry point of Engage
Original source file: /auto/srbu-proj1/apps/users/obenreph/autoBuild/App/SML/Engage/V3.6.0/src/com/pcube/AppTemplate/Main/template_app_main.san
Compilation date: Mon, April 26, 2010 at 09:04:40
Compiler version: SANc v3.20 Build 14 built on: Tue 08/04/2009 06:58:22.;SME plugin v1.1
Capacity option used: 'EngageDefaultSCE2000'.
Logger status: Enabled
Platform: SCE2000 - 4xGBE
Management agent interface version: SCE Agent 3.6.0 Build 429
Software package file: ftp://ftpserver/C:\Documents and Settings\btadlock\Desktop\scos-v360-b716-sce2000-k9.pkg
Hi Olaf,
The lwapp APs are not snmp-manageable but the controllers takes care of that. You can poll the WLC via SNMP and it will give you the radio status of all the APs.
I suggest using the Cisco MIB browser tool to find out more about the AIRESPACE mib that the WLC is using.
Nicolas
Similar Messages
-
Cisco Threat Responder and SNMP
Any one with experience with CTR sending alerts to a SNMP Mgmt Center ? I have tried to send to Tivoli with not much luck in terms of formatted alerts (yes, mib loaded) as well as too much information (ie: not filtered to just critical alerts) being sent.
I havent seen this with CTR. However SNMP traps, as-well-as events can be generated with IPS 5.0.
-
Cisco WCS integration with SNMP based monitoring
I am looking for a solution to integrate Cisco WCS with any SNMP based monitoring solution. My requirement is below,
- Alerts for Access points up/down should be picked up by an alerting system in its console through SNMP.
- I dont want all access points to be monitored, but only a critical group.
Currently all access points are configured on LWAP mode under a wireless controller. Can i configure APs individually for SNMP and get it monitored through the 3rd party monitoring tool.
Can anyone please guide me to find a solution for this.http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch2_CAS.html
-
SCOM SP1 Groups, Classes and SNMP
I've been working on a management pack using some of the examples on the net (Kristopher Bash from the operating-quadrantin has been a huge inspiration) to monitor an Isilon cluster. This had lead me to a number of interesting challenges to over come since I have to design this within the confines of SP1 and I have a unique networking to device configuration.
Device Overview:
The Isilon cluster itself is a number of FreeBSD systems (nodes) joined together via and infiniband backend to create a single NAS. While normally this would not be an issue, network connectivity to the device and SNMP response from the cluster have been. In my configuration I have a total of 8 nodes each node has 2 network interfaces. Of these 16 network interfaces only 2 are accessible/on the same network as my RMS (em1 node2, em1 node4).
Device SNMP Design:
While the cluster is highly dynamic the SNMP sub-systems are not. The MIB created by Isilon does not join the whole of the cluster into an index for SNMP polling. I can only poll a single nodes OID's. To over come this limitation Isilon implemented SNMP-Proxy or comtosec within the system. This allowed me to poll node 3 by changing the community name for the OID I was polling from the discovered name to <discoveredname>_node_3.
MP Design:
Now I'm not the best at MP design since I rarely work within SCOM so don't laugh too hard... I reused items from Kristopher's Cisco MP and created a number of classes for discovery and item hosting. To address the limitation I found within SCOM for dynamic discovery and 1 IP address 1 Community Name, I created a class property within the root called ConfiguredNodes. I can poll the Isilon an populate this value (8). Then I created a sub-class property value called NodeCommStr to fill in all the custom community names I generate using a VB script with Base64 encode/decode, the discovery community name and the ConfiguredNodes value, in the data source for sub-class discovery. public_node_1 public_node_2 etc...
All in all this is working well however I have run into a few design roadblocks and I have some questions.
1. When I discover a set of items within the Isilon cluster the health explorer is not sorting this information alphabetically. Is there a value I can include in the dependency roll-up to correct this?
2. I have run into an issue with the Isilon MIB and I'm looking for the best way to overcome the MIB's design. They included a fan table with fan information and speed of the fans however there is no status (success{0}, warning{1}, error{2}). I created a monitor type to compensate for this and included overrides for the warning and critical event points. This is where I found the curve ball, seems that the fans are not the same.... There are 2 sets of fans - Chassis and Power Supply - and they have different thresholds *rolls eyes*. Some I'm asking for the best design advice, should I create 2 classes, discoveries, monitor types, etc.? Or can I address this issue by creating 2 monitor types with a string filter?
3. I've been successful in creating this MP and displaying the information as a single device however I was wondering if there was a way to create dynamic groups with sub groups. This would have to be 100% dynamic since I can add a 9th 10th 192nd (yes 192) node to the cluster.
Cluster
-ClusterNode1
-ClusterNode1Power
-ClusterNode1Fans
-etc
The information is there in the NodeCommStr, I'm just in brain lock on how to design it right now.
Again, code is raw and a work in progress so please no giggling. Oh this is a multi post... Code is too long.
<Manifest>
<Identity>
<ID>IsilonSNMP</ID>
<Version>1.0.1.2</Version>
</Identity>
<Name>IsilonSNMP</Name>
<References>
<Reference Alias="MicrosoftSystemCenterNetworkDeviceLibrary">
<ID>Microsoft.SystemCenter.NetworkDevice.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Snmp">
<ID>System.Snmp.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SystemHardwareLibrary">
<ID>System.Hardware.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SystemPerformanceLibrary">
<ID>System.Performance.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="IsilonSNMP.Class.IsilonCluster" Accessibility="Public" Abstract="false" Base="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice" Hosted="false" Singleton="false">
<Property ID="Hostname" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="ConfiguredNodes" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<!-- <Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" /> -->
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.Nodes" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.Chassis" Hosted="true" Singleton="false">
<Property ID="Name" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.PhysicalDisk" Hosted="true" Singleton="false">
<Property ID="Index" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
<!-- <Property ID="ConfiguredNodes" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" /> -->
<Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="BayIndex" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.Fan" Hosted="true" Singleton="false">
<Property ID="Index" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="FanNumber" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Group.IsilonClusters" Accessibility="Public" Abstract="false" Base="System!System.Group" Hosted="false" Singleton="true" />
</ClassTypes>
<RelationshipTypes>
<RelationshipType ID="IsilonSNMP.Relationship.ClusterHostsNodes" Accessibility="Internal" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster</Source>
<Target>IsilonSNMP.Class.IsilonCluster.Nodes</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters" Accessibility="Public" Abstract="false" Base="System!System.Containment">
<Source>IsilonSNMP.Group.IsilonClusters</Source>
<Target>IsilonSNMP.Class.IsilonCluster</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" Accessibility="Public" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster.Nodes</Source>
<Target>IsilonSNMP.Class.IsilonCluster.PhysicalDisk</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.NodesHostsPhysicalFan" Accessibility="Public" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster.Nodes</Source>
<Target>IsilonSNMP.Class.IsilonCluster.PhysicalFan</Target>
</RelationshipType>
</RelationshipTypes>
</EntityTypes>
<ModuleTypes>
<DataSourceModuleType ID="IsilonSNMP.DataSource.BasicSNMPProbe" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="SNMPProbe" TypeID="Snmp!System.SnmpProbe">
<IsWriteAction>false</IsWriteAction>
<IP>$Config/IPAddress$</IP>
<CommunityString>$Config/CommStr$</CommunityString>
<SnmpVarBinds>
<SnmpVarBind>
<OID>$Config/OID$</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
</SnmpVarBinds>
</ProbeAction>
<ConditionDetection ID="ValueFilter" TypeID="System!System.ExpressionFilter">
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String" />
</ValueExpression>
</SimpleExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="ValueFilter">
<Node ID="SNMPProbe">
<Node ID="Scheduler" />
</Node>
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>Snmp!System.SnmpData</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverContainmentClasses" Accessibility="Internal" Batching="false">
<Configuration>
<IncludeSchemaTypes>
<SchemaType>System!System.ParamListSchema</SchemaType>
<SchemaType>System!System.Discovery.MapperSchema</SchemaType>
</IncludeSchemaTypes>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ClassID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="InstanceSettings" type="SettingsType" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>60</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ConditionDetection ID="Mapper" TypeID="System!System.Discovery.ClassSnapshotDataMapper">
<ClassId>$Config/ClassID$</ClassId>
<InstanceSettings>$Config/InstanceSettings$</InstanceSettings>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="Mapper">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverCluster" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IP" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommunityString" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="SystemOID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval Unit="Seconds">$Config/Interval$</Interval>
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="Probe" TypeID="Snmp!System.SnmpProbe">
<IsWriteAction>false</IsWriteAction>
<IP>$Config/IP$</IP>
<CommunityString>$Config/CommunityString$</CommunityString>
<SnmpVarBinds>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.12124.1.1.4.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.12124.1.1.1.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.5.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.1.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.4.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.6.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.2.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
</SnmpVarBinds>
</ProbeAction>
<ConditionDetection ID="Mapper" TypeID="System!System.Discovery.FilteredClassSnapshotDataMapper">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery>/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>1.3.6.1.4.1.12124.</Pattern>
</RegExExpression>
</Expression>
<ClassId>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Name>
<Value>$Data/Source$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Name$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[5]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemDescription$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[4]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemContact$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[3]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemLocation$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[2]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemOID$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[1]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[5]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]/Hostname$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[6]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[7]/Value$</Value>
</Setting>
</Settings>
</InstanceSettings>
</ConditionDetection>
<ConditionDetection ID="SystemOIDFilter" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<Value>$Config/SystemOID$</Value>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>1.3.6.1.4.1.12124.</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="Mapper">
<Node ID="Probe">
<Node ID="SystemOIDFilter">
<Node ID="Scheduler" />
</Node>
</Node>
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverPhysicalDisk" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ConfiguredNodes" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="BayIndex" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="ScriptDiscovery" TypeID="Windows!Microsoft.Windows.ScriptDiscoveryProbe">
<ScriptName>DiscoverIsilonDisk.vbs</ScriptName>
<Arguments>$Config/IPAddress$ $Config/CommStr$ $MPElement$ $Target/Id$ $Config/ConfiguredNodes$</Arguments>
<ScriptBody>
<![CDATA['Discover PhysicalDisk
Dim oAPI, oDiscoveryData, oInst, objWMIServices, objWMILocator, oArgs
set oArgs = Wscript.Arguments
if oArgs.Count <5 Then
Wscript.Quit -1
End If
DeviceIP = oArgs(0)
CommStr = oArgs(1)
SourceID = oArgs(2)
ManagedEntityId = oArgs(3)
StrConfiguredNodes = oArgs(4)
CommStr = Decode(CommStr)
ConfiguredNodesCommStr = cstr(CommStr)
wscript.echo CommStr
Set oAPI = CreateObject("MOM.ScriptAPI")
set oDiscoveryData = oAPI.CreateDiscoveryData(0, SourceId, ManagedEntityId)
Set objWMILocator = CreateObject("WbemScripting.SWbemLocator")
Set objWMIServices = objWMiLocator.ConnectServer("","root\snmp\localhost")
'Name community name
GetPhysicalDisks
'Created community names
For i = 1 to StrConfiguredNodes
CommStr = ConfiguredNodesCommStr & "_node_" & i
GetPhysicalDisks
Next
'Return all data to SCOM
Call oAPI.Return(oDiscoveryData)
Sub GetPhysicalDisks
on error resume next
Set objWmiNamedValueSet = CreateObject("WbemScripting.SWbemNamedValueSet")
objWmiNamedValueSet.Add "AgentAddress", cstr(DeviceIP)
objWmiNamedValueSet.Add "AgentReadCommunityName", cstr(CommStr)
Set colPhysicalDisk = objWmiServices.InstancesOf("SNMP_ISILON_MIB_diskTable", , objWMINamedValueset)
For each objItem in colPhysicalDisk
nIndex = objItem.diskBay
sDesc = objItem.diskSerialNumber
if nIndex > 0 then
set oInst = oDiscoveryData.CreateClassInstance("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']$")
call oInst.AddProperty("$MPElement[Name='MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice']/IPAddress$", DeviceIP)
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/Index$", cstr(CommStr) & "-" & cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/NodeCommStr$", Encode(CommStr))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/BayIndex$", cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.Nodes']/Name$", "Cluster")
call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - Bay " & nIndex & " - Serial Number " & HexToString(sDesc))
'call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", HexToString(sDesc))
call oDiscoveryData.AddInstance(oInst)
'Test Section
'wscript.echo Base64Encode(CommStr)
'wscript.echo Base64Encoder(CommStr)
'wscript.Echo CommStr
'wscript.Echo nIndex
'Wscript.Echo HexToString(sDesc)
'wscript.echo cdbl(nIndex) & cstr(CommStr)
end if
Next
on error goto 0
End Sub
Function Decode(strB64)
strXML = "<B64DECODE xmlns:dt=" & Chr(34) & _
"urn:schemas-microsoft-com:datatypes" & Chr(34) & " " & _
"dt:dt=" & Chr(34) & "bin.base64" & Chr(34) & ">" & _
strB64 & "</B64DECODE>"
Set oXMLDoc = CreateObject("MSXML2.DOMDocument.3.0")
oXMLDoc.LoadXML(strXML)
decode = oXMLDoc.selectsinglenode("B64DECODE").nodeTypedValue
set oXMLDoc = nothing
End Function
Function Encode(Str)
'Use ADODB.Stream to write Ansi string to Unicode stream
Set objStream = CreateObject("ADODB.Stream")
objStream.Type = 2
objStream.Open
objStream.Charset = "unicode"
objStream.WriteText Str
objstream.Flush
'Read the stream back as a byte array
objStream.Position = 0
objStream.Type = 1
temp = objstream.read(2) 'read two bytes of the stream to discard the byte order mark
bArray = objStream.Read
objStream.Close
'Convert byte array to Base64
set objXML = createobject("MSXML2.DOMDocument.3.0")
Set objNode = objXML.createElement("b64")
objNode.dataType = "bin.base64"
objNode.nodeTypedValue = bArray
Encode = objNode.Text
Set Stream = Nothing
set objNode = nothing
set objXML = nothing
End Function
Function HexToString(str)
on error resume next
sOutput = ""
For x = 1 To len(str) Step 2
sChar = Chr(Clng("&h" & Mid(str,x,2)))
sOutput = sOutput & sChar
Next
if err.number = 0 then
HexToString = sOutput
Else
HexToString = str
end if
End Function
set oInst = nothing
set oDiscoveryData = nothing
set oArgs = nothing
set oAPI = nothing
set objWMILocator = nothing
set objWMIServices = nothing
set objWMINamedValueSet = nothing
]]>
</ScriptBody>
<TimeoutSeconds>120</TimeoutSeconds>
</ProbeAction>
</MemberModules>
<Composition>
<Node ID="ScriptDiscovery">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType><DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverPhysicalFan" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ConfiguredNodes" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanNumber" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanSpeedHighCritical" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowWarn" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowCritical" type="xsd:integer" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedHighCritical" Selector="$Config/FanSpeedHighCritical$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowWarn" Selector="$Config/FanSpeedLowWarn$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowCritical" Selector="$Config/FanSpeedLowCritical$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="ScriptDiscovery" TypeID="Windows!Microsoft.Windows.ScriptDiscoveryProbe">
<ScriptName>DiscoverIsilonPhysicalFan.vbs</ScriptName>
<Arguments>$Config/IPAddress$ $Config/CommStr$ $MPElement$ $Target/Id$ $Config/ConfiguredNodes$</Arguments>
<ScriptBody>
<![CDATA['Discover PhysicalFan
Dim oAPI, oDiscoveryData, oInst, objWMIServices, objWMILocator, oArgs
set oArgs = Wscript.Arguments
if oArgs.Count <5 Then
Wscript.Quit -1
End If
DeviceIP = oArgs(0)
CommStr = oArgs(1)
SourceID = oArgs(2)
ManagedEntityId = oArgs(3)
StrConfiguredNodes = oArgs(4)
CommStr = Decode(CommStr)
ConfiguredNodesCommStr = cstr(CommStr)
wscript.echo CommStr
Set oAPI = CreateObject("MOM.ScriptAPI")
set oDiscoveryData = oAPI.CreateDiscoveryData(0, SourceId, ManagedEntityId)
Set objWMILocator = CreateObject("WbemScripting.SWbemLocator")
Set objWMIServices = objWMiLocator.ConnectServer("","root\snmp\localhost")
'Name community name
GetPhysicalFan
'Created community names
For i = 1 to StrConfiguredNodes
CommStr = ConfiguredNodesCommStr & "_node_" & i
GetPhysicalFan
Next
'Return all data to SCOM
Call oAPI.Return(oDiscoveryData)
Sub GetPhysicalFan
on error resume next
Set objWmiNamedValueSet = CreateObject("WbemScripting.SWbemNamedValueSet")
objWmiNamedValueSet.Add "AgentAddress", cstr(DeviceIP)
objWmiNamedValueSet.Add "AgentReadCommunityName", cstr(CommStr)
Set colPhysicalFan = objWmiServices.InstancesOf("SNMP_ISILON_MIB_FanTable", , objWMINamedValueset)
For each objItem in colPhysicalFan
nIndex = objItem.fanNumber
sDesc = objItem.fanDescription
if nIndex > 0 then
set oInst = oDiscoveryData.CreateClassInstance("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']$")
call oInst.AddProperty("$MPElement[Name='MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice']/IPAddress$", DeviceIP)
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/Index$", cstr(CommStr) & "-" & cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/NodeCommStr$", Encode(CommStr))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/FanNumber$", cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.Nodes']/Name$", "Cluster")
'call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - Bay " & nIndex & " - Serial Number " & HexToString(sDesc))
call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - " & HexToString(sDesc))
call oDiscoveryData.AddInstance(oInst)
'Test Section
'wscript.echo Base64Encode(CommStr)
'wscript.echo Base64Encoder(CommStr)
'wscript.Echo CommStr
'wscript.Echo nIndex
'Wscript.Echo HexToString(sDesc)
'wscript.echo cdbl(nIndex) & cstr(CommStr)
end if
Next
on error goto 0
End Sub
Function Decode(strB64)
strXML = "<B64DECODE xmlns:dt=" & Chr(34) & _
"urn:schemas-microsoft-com:datatypes" & Chr(34) & " " & _
"dt:dt=" & Chr(34) & "bin.base64" & Chr(34) & ">" & _
strB64 & "</B64DECODE>"
Set oXMLDoc = CreateObject("MSXML2.DOMDocument.3.0")
oXMLDoc.LoadXML(strXML)
decode = oXMLDoc.selectsinglenode("B64DECODE").nodeTypedValue
set oXMLDoc = nothing
End Function
Function Encode(Str)
'Use ADODB.Stream to write Ansi string to Unicode stream
Set objStream = CreateObject("ADODB.Stream")
objStream.Type = 2
objStream.Open
objStream.Charset = "unicode"
objStream.WriteText Str
objstream.Flush
'Read the stream back as a byte array
objStream.Position = 0
objStream.Type = 1
temp = objstream.read(2) 'read two bytes of the stream to discard the byte order mark
bArray = objStream.Read
objStream.Close
'Convert byte array to Base64
set objXML = createobject("MSXML2.DOMDocument.3.0")
Set objNode = objXML.createElement("b64")
objNode.dataType = "bin.base64"
objNode.nodeTypedValue = bArray
Encode = objNode.Text
Set Stream = Nothing
set objNode = nothing
set objXML = nothing
End Function
Function HexToString(str)
on error resume next
sOutput = ""
For x = 1 To len(str) Step 2
sChar = Chr(Clng("&h" & Mid(str,x,2)))
sOutput = sOutput & sChar
Next
if err.number = 0 then
HexToString = sOutput
Else
HexToString = str
end if
End Function
set oInst = nothing
set oDiscoveryData = nothing
set oArgs = nothing
set oAPI = nothing
set objWMILocator = nothing
set objWMIServices = nothing
set objWMINamedValueSet = nothing
]]>
</ScriptBody>
<TimeoutSeconds>120</TimeoutSeconds>
</ProbeAction>
</MemberModules>
<Composition>
<Node ID="ScriptDiscovery">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
</ModuleTypes>
<MonitorTypes>
<UnitMonitorType ID="IsilonSNMP.MonitorType.PhysicalDiskStatus" Accessibility="Internal">
<MonitorTypeStates>
<MonitorTypeState ID="PhysicalDiskOK" NoDetection="false" />
<MonitorTypeState ID="PhysicalDiskNotOK" NoDetection="false" />
</MonitorTypeStates>
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<MonitorImplementation>
<MemberModules>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Interval>$Config/Interval$</Interval>
<IPAddress>$Config/IPAddress$</IPAddress>
<CommStr>$Config/NodeCommStr$</CommStr>
<OID>$Config/OID$</OID>
</DataSource>
<ConditionDetection ID="CDPhysicalDiskOK" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>HEALTHY</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalDiskNotOK" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>DoesNotContainSubstring</Operator>
<Pattern>HEALTHY</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<RegularDetections>
<RegularDetection MonitorTypeStateID="PhysicalDiskOK">
<Node ID="CDPhysicalDiskOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalDiskNotOK">
<Node ID="CDPhysicalDiskNotOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
</RegularDetections>
</MonitorImplementation>
</UnitMonitorType>
<UnitMonitorType ID="IsilonSNMP.MonitorType.PhysicalFanStatus" Accessibility="Internal">
<MonitorTypeStates>
<MonitorTypeState ID="PhysicalFanOK" NoDetection="false" />
<MonitorTypeState ID="PhysicalFanWarn" NoDetection="false" />
<MonitorTypeState ID="PhysicalFanCritical" NoDetection="false" />
</MonitorTypeStates>
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanSpeedHighCritical" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowWarn" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowCritical" type="xsd:integer" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedHighCritical" Selector="$Config/FanSpeedHighCritical$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowWarn" Selector="$Config/FanSpeedLowWarn$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowCritical" Selector="$Config/FanSpeedLowCritical$" ParameterType="int" />
</OverrideableParameters>
<MonitorImplementation>
<MemberModules>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Interval>$Config/Interval$</Interval>
<IPAddress>$Config/IPAddress$</IPAddress>
<CommStr>$Config/NodeCommStr$</CommStr>
<OID>$Config/OID$</OID>
</DataSource>
<ConditionDetection ID="CDPhysicalFanOK" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Less</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedHighCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Greater</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalFanWarn" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>LessEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Greater</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalFanCritical" TypeID="System!System.ExpressionFilter">
<Expression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>GreaterEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedHighCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>LessEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</Expression>
</ConditionDetection>
</MemberModules>
<RegularDetections>
<RegularDetection MonitorTypeStateID="PhysicalFanOK">
<Node ID="CDPhysicalFanOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalFanWarn">
<Node ID="CDPhysicalFanWarn">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalFanCritical">
<Node ID="CDPhysicalFanCritical">
<Node ID="DS1" />
</Node>
</RegularDetection>
</RegularDetections>
</MonitorImplementation>
</UnitMonitorType>
</MonitorTypes>
</TypeDefinitions>
<Monitoring>
<Discoveries>
<Discovery ID="IsilonSNMP.Discovery.Cluster" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.Nodes" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.ClusterHostsNodes" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverContainmentClasses">
<IPAddress>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<ClassID>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.Nodes"]$</ClassID>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Name>
<Value>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>Cluster</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.Nodes"]/Name$</Name>
<Value>Cluster</Value>
</Setting>
</Settings>
</InstanceSettings>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.IsilonCluster" Enabled="true" Target="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverCluster">
<Interval>600</Interval>
<IP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IP>
<CommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommunityString>
<SystemOID>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemOID$</SystemOID>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.IsilonClustersGroup" Enabled="true" Target="IsilonSNMP.Group.IsilonClusters" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters" />
</DiscoveryTypes>
<DataSource ID="GP1" TypeID="SC!Microsoft.SystemCenter.GroupPopulator">
<RuleId>$MPElement$</RuleId>
<GroupInstanceId>$MPElement[Name="IsilonSNMP.Group.IsilonClusters"]$</GroupInstanceId>
<MembershipRules>
<MembershipRule>
<MonitoringClass>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters"]$</RelationshipClass>
<Expression>
<RegExExpression>
<ValueExpression>
<Property>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Property>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>.</Pattern>
</RegExExpression>
</Expression>
</MembershipRule>
</MembershipRules>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.PhysicalDisk" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverPhysicalDisk">
<IPAddress>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<CommStr>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommStr>
<Interval>7800</Interval>
<ConfiguredNodes>$Target/Host/Property[Type="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</ConfiguredNodes>
<BayIndex>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/BayIndex$</BayIndex>
<NodeCommStr>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/NodeCommStr$</NodeCommStr>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.PhysicalFan" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.NodesHostsPhysicalFan" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverPhysicalFan">
<IPAddress>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<CommStr>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommStr>
<Interval>8000</Interval>
<ConfiguredNodes>$Target/Host/Property[Type="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</ConfiguredNodes>
<FanNumber>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/FanNumber$</FanNumber>
<NodeCommStr>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/NodeCommStr$</NodeCommStr>
<FanSpeedHighCritical>14500</FanSpeedHighCritical>
<FanSpeedLowWarn>3400</FanSpeedLowWarn>
<FanSpeedLowCritical>3000</FanSpeedLowCritical>
</DataSource>
</Discovery>
</Discoveries>
<Monitors>
<UnitMonitor ID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" Accessibility="Public" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Snmp!System.SnmpTrapProvider.2SingleEvent2StateMonitorType" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UIGeneratedOpStateId843498792d7d4fbf80d83f3939255dd9" MonitorTypeStateID="SecondEventRaised" HealthState="Success" />
<OperationalState ID="UIGeneratedOpStateId9fd776cd21a747c5994738e863b31fb9" MonitorTypeStateID="FirstEventRaised" HealthState="Warning" />
</OperationalStates>
<Configuration>
<FirstIP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</FirstIP>
<FirstCommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</FirstCommunityString>
<FirstAllTraps>false</FirstAllTraps>
<FirstVersion>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Version$</FirstVersion>
<FirstOIDProps>
<OIDProp>.1.3.6.1.4.1.12124.1.1.2.0</OIDProp>
</FirstOIDProps>
<FirstExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">1</Value>
</ValueExpression>
</SimpleExpression>
</FirstExpression>
<SecondIP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</SecondIP>
<SecondCommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</SecondCommunityString>
<SecondAllTraps>false</SecondAllTraps>
<SecondVersion>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Version$</SecondVersion>
<SecondOIDProps>
<OIDProp>.1.3.6.1.4.1.12124.1.1.2.0</OIDProp>
</SecondOIDProps>
<SecondExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">1</Value>
</ValueExpression>
</SimpleExpression>
</SecondExpression>
</Configuration>
</UnitMonitor>
<UnitMonitor ID="IsilonSNMP.Monitor.PhysicalDiskStatus" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="IsilonSNMP.MonitorType.PhysicalDiskStatus" ConfirmDelivery="true">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskOK" MonitorTypeStateID="PhysicalDiskOK" HealthState="Success" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskNotOK" MonitorTypeStateID="PhysicalDiskNotOK" HealthState="Warning" />
</OperationalStates>
<Configuration>
<Interval>120</Interval>
<IPAddress>$Target/Host/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<OID>.1.3.6.1.4.1.12124.2.52.1.5.$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/BayIndex$</OID>
<NodeCommStr>$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/NodeCommStr$</NodeCommStr>
</Configuration>
</UnitMonitor>
<UnitMonitor ID="IsilonSNMP.Monitor.PhysicalFanStatus" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.PhysicalFan" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="IsilonSNMP.MonitorType.PhysicalFanStatus" ConfirmDelivery="true">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanOK" MonitorTypeStateID="PhysicalFanOK" HealthState="Success" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanWarn" MonitorTypeStateID="PhysicalFanWarn" HealthState="Warning" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanCritical" MonitorTypeStateID="PhysicalFanCritical" HealthState="Error" />
</OperationalStates>
<Configuration>
<Interval>120</Interval>
<IPAddress>$Target/Host/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<OID>.1.3.6.1.4.1.12124.2.53.1.4.$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/FanNumber$</OID>
<NodeCommStr>$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/NodeCommStr$</NodeCommStr>
<FanSpeedHighCritical>14500</FanSpeedHighCritical>
<FanSpeedLowWarn>3400</FanSpeedLowWarn>
<FanSpeedLowCritical>3000</FanSpeedLowCritical>
</Configuration>
</UnitMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterPhysicalDiskAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" MemberMonitor="IsilonSNMP.Monitor.PhysicalDiskStatus">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterPhysicalFanAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.NodesHostsPhysicalFan" MemberMonitor="IsilonSNMP.Monitor.PhysicalFanStatus">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterClusterAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.ClusterHostsNodes" MemberMonitor="Health!System.Health.AvailabilityState">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
</Monitors>
</Monitoring>
<Presentation>
<StringResources>
<StringResource ID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID" />
<StringResource ID="AlertMessageIDb1a3848769824949889fcc4c159cf462" />
<StringResource ID="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID" />
<StringResource ID="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID" />
</StringResources>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="IsilonSNMP">
<Name>Isilon SNMP MP</Name>
<Description>Management pack to discover a Isilon cluster running OneFS 5.5</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster">
<Name>Isilon Cluster</Name>
<Description>Isilon SNMP Device</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster" SubElementID="Hostname">
<Name>Hostname</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster" SubElementID="ConfiguredNodes">
<Name>ConfiguredNodes</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.Nodes" SubElementID="Name">
<Name>Name</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.Nodes">
<Name>Isilon Cluster Hosts Nodes</Name>
<Description>Containment class for the Isilon cluster with components such as hard disks, fans, power supplies, etc.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.ClusterHostsNodes">
<Name>Isilon Cluster Hosts Nodes</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.IsilonCluster">
<Name>Discover Isilon Cluster</Name>
<Description>Discovery of the Isilon Cluster using OID strings from RFC1213.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Name>Isilon Basic Probe Data Source</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverCluster">
<Name>Discover Isilon Cluster</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters">
<Name>Isilon Devices Group Contains Isilon Cluster</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.Cluster">
<Name>Discover Isilon Cluster Containment Class</Name>
<Description>Discovers the Cluster containment class, which hosts managed objects such as fans</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.IsilonClustersGroup">
<Name>Isilon Deivce Group Populator</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70">
<Name>PlaceHolder</Name>
<Description>Place Holder to detect isilon cluster</Description>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" SubElementID="UIGeneratedOpStateId843498792d7d4fbf80d83f3939255dd9">
<Name>Second Event Raised</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" SubElementID="UIGeneratedOpStateId9fd776cd21a747c5994738e863b31fb9">
<Name>First Event Raised</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID">
<Name>PlaceHolder</Name>
<Description>placeholder alert to detect isilon</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus">
<Name>Isilon PhysicalDisk Status Monitor</Name>
<Description>Monitor that generates an alert when the PhysicalDisk status is not ok.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus" SubElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskOK">
<Name>PhysicalDiskOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus" SubElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskNotOK">
<Name>PhysicalDiskOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID">
<Name>Isilon PhysicalDisk Status</Name>
<Description>The Disk ({0}) is in a warning or error state. The Disk state is: {1}.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk">
<Name>Isilon Disk</Name>
<Description>Disk</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" SubElementID="Index">
<Name>Index</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk">
<Name>Isilon Cluster Hosts PhysicalDisk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.PhysicalDisk">
<Name>Discover Isilon Cluster Physical Disks</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverPhysicalDisk">
<Name>Discover Isilon Cluster PhysicalDisk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterPhysicalDiskAvailabilityDependency">
<Name>Isilon Disk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus">
<Name>Isilon PhysicalFan Status Monitor</Name>
<Description>Monitor that generates an alert when the PhysicalFan speed is not within a premited range.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanOK">
<Name>PhysicalFanOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanWarn">
<Name>PhysicalFanWarn</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanCritical">
<Name>PhysicalFanCritical</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID">
<Name>Isilon PhysicalFan Status</Name>
<Description>The Fan ({0}) is in a warning or error state. Current Fan speed is: {1}.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalFan">
<Name>Isilon Fan</Name>
<Description>Fan</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" SubElementID="Index">
<Name>Index</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.NodesHostsPhysicalFan">
<Name>Isilon Cluster Hosts PhysicalFan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.PhysicalFan">
<Name>Discover Isilon Cluster Physical Fans</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverPhysicalFan">
<Name>Discover Isilon Cluster PhysicalFan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterPhysicalFanAvailabilityDependency">
<Name>Isilon Fan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterClusterAvailabilityDependency">
<Name>Cluster</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks> -
Hi!
Cisco SCE 8000 working normally while traffic through it not pass. When i connect optical links and start passing traffic throught cisco, i have a problem. SCE watchdog run software reboot with error:
2013-09-30 13:54:40 | FATAL | CPU #000 | A problem occurred in the SCE8000 Service Control Module Extended (SCM-E) slot 1 ,Please report to Cisco's customer support.
2013-09-30 13:54:40 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2013-09-30 13:54:40 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2013-09-30 13:54:41 | WARN | CPU #000 | SE Watchdog Module: A problem occurred. Please report to Cisco's customer support
2013-09-30 13:54:41 | INFO | CPU #000 | Party data base was closed.
In debug file i found:
Interrupt Received from: SimbaDPT[0].Tx[0].CTX_ISR.ECCMultiErrorInt - description: RLDRAM ECC multi bit error interrupt.
What the problem could be?I have tried 3.7.2, 3.8.5, 4.0.0. Unfortunately, the result is the same. I think that hardware problem (RAM).
-
Cisco 877W router and external ADSL modem
Cisco 877W router and external ADSL modem
In order to support ADSL2+ on a pre ADSL2+ router and in preparation for a later migration to BT infinity I am trying to configure the Router using an external adsl2+ modem appropriately.
The original configuration had 3 ports configured as one (internal lan) vlan and bridge group together with one wireless sub-interface, the remaining port configured a second vlan and bridge group with a second wireless sub- interface. The Dialer was a member of the second bridge group. This way the second wireless interface and associated bridge group provided a kind of DMZ for outbound access.
The configuration I am attempting is similar the lan ports remain the same, but port 0 as a member of the vlan and bridge group (now a pppoe client) associated with one of the wireless sub interfaces as per above. The ATM interface is downed. This nearly works except that if the wireless subinterface on this bridge group is configured the dialer no longer dials giving a 'no dialer string' error. If I do not configure that wireless sub interface all works well.
If anyone is interested to look I would appreciate any comments. I enclose a sanitised config in which you will note the 'commented out' wireless subnet interface (in red).
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname xxxxxxxxxxxxxxxxxxxxx
boot-start-marker
boot-end-marker
logging buffered 4096 warnings
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxx
aaa new-model
aaa group server radius sdm-vpn-server-group-2
aaa group server radius rad_eap
server 192.168.253.1 auth-port 1812 acct-port 1813
server 192.168.253.1 auth-port 1645 acct-port 1646
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_2 group sdm-vpn-server-group-2
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa authorization network sdm_vpn_group_ml_2 local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone PCTime 0
clock summer-time PCTime date Mar 30 2003 1:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-2834265337
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2834265337
revocation-check none
rsakeypair TP-self-signed-2834265337
crypto pki certificate chain TP-self-signed-2834265337
certificate self-signed 01 nvram:IOS-Self-Sig#2F.cer
dot11 syslog
dot11 ssid GuestAP
vlan 101
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 113B162712001F4A2D2B25
dot11 ssid LanAP
vlan 100
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
mbssid guest-mode
no ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.252.1 192.168.252.8
ip dhcp excluded-address 192.168.252.15 192.168.252.254
ip dhcp pool sdm-pool1
import all
network 192.168.252.0 255.255.255.0
domain-name XXX.Local
dns-server xxx.xxx.xxx.xxx
default-router 192.168.252.254
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
no ip domain lookup
ip domain name XXX.Local
ip name-server xxx.xxx.xxx.xxx
ip name-server xxx.xxx.xxx.xxx
ip reflexive-list timeout 120
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
username administrator privilege 15 secret 5 £££££££££££££££££££££
class-map type inspect match-any IN_to_OUT_CLASS
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-any OUT_to_IN_CLASS
match protocol https
match protocol smtp extended
class-map type inspect match-any DMZ_to_IN_CLASS
match protocol http
match protocol https
match protocol smtp extended
policy-map type inspect DMZ_to_IN_POL
class type inspect DMZ_to_IN_CLASS
inspect
class class-default
drop log
policy-map type inspect IN_to_OUT_POL
class type inspect IN_to_OUT_CLASS
inspect
class class-default
drop log
policy-map type inspect OUT_to_IN_POL
class type inspect OUT_to_IN_CLASS
inspect
class class-default
drop log
zone security INSIDE
zone security OUTSIDE
zone security DMZ
zone-pair security OUT_TO_IN source OUTSIDE destination INSIDE
service-policy type inspect OUT_to_IN_POL
zone-pair security IN_TO_OUT source INSIDE destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_OUT source DMZ destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_IN source DMZ destination INSIDE
service-policy type inspect DMZ_to_IN_POL
bridge irb
interface Loopback0
no ip address
interface Null0
no ip unreachables
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
interface FastEthernet0
description Outside Interface (PPPoE)
interface FastEthernet1
description Inside Interface
switchport access vlan 10
interface FastEthernet2
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface FastEthernet3
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface Dot11Radio0
no ip address
no ip route-cache cef
no ip route-cache
encryption vlan 100 mode ciphers aes-ccm tkip
encryption vlan 101 mode ciphers aes-ccm tkip
ssid GuestAP
ssid LanAP
mbssid
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2437
station-role root
interface Dot11Radio0.100
description LanAP
encapsulation dot1Q 100
no ip route-cache
no cdp enable
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 spanning-disabled
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
!interface Dot11Radio0.101
! description GuestAP
! encapsulation dot1Q 101
! no ip route-cache
! no cdp enable
! bridge-group 1
! bridge-group 1 subscriber-loop-control
! bridge-group 1 spanning-disabled
! bridge-group 1 block-unknown-source
! no bridge-group 1 source-learning
! no bridge-group 1 unicast-flooding
interface Vlan1
description $ES_LAN$
no ip address
ip virtual-reassembly
pppoe enable group global
pppoe-client dial-pool-number 1
bridge-group 1
interface Vlan10
no ip address
ip virtual-reassembly
bridge-group 10
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip nat outside
ip virtual-reassembly
zone-member security OUTSIDE
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXX
ppp chap password 7 xxxxxxxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxxxxxxxxxx password 7 xxxxxxxxxxxxxxxxxxxxx
ppp ipcp dns request
ppp ipcp wins request
hold-queue 224 in
interface Dialer0
no ip address
interface BVI10
description Inside Interface
ip address 192.168.253.254 255.255.255.0
ip access-group 101 in
ip helper-address 192.168.253.1
ip nat inside
ip virtual-reassembly
zone-member security INSIDE
interface BVI1
description DMZ Interface
ip address 192.168.252.254 255.255.255.0
ip nat inside
ip virtual-reassembly
zone-member security DMZ
ip local pool SDM_POOL_1 192.168.20.9 192.168.20.14
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list Inside_Clients_NAT interface Dialer1 overload
ip nat inside source static 192.168.253.10 xxx.xxx.xxx.xxx
ip access-list extended DMZ_to_IN_POL
remark SDM_ACL Category=128
permit ip any any
ip access-list extended Inside_Clients_NAT
remark SDM_ACL Category=2
permit ip 192.168.253.0 0.0.0.255 any
logging 192.168.253.10
access-list 1 remark Auto generated by SDM Management Access feature
access-list 1 remark SDM_ACL Category=1
access-list 1 permit 192.168.253.0 0.0.0.255
access-list 100 remark VTY Access-class list
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.253.0 0.0.0.255 any
access-list 100 deny ip any any
access-list 101 remark Auto generated by SDM Management Access feature
access-list 101 remark SDM_ACL Category=1
access-list 101 remark Auto generated by SDM for NTP (123) xxx.xxx.xxx.xxx
access-list 101 permit udp host xxx.xxx.xxx.xxx eq ntp host 192.168.253.254 eq ntp
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq telnet
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 22
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq www
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 443
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq cmd
access-list 101 deny tcp any host 192.168.253.254 eq telnet
access-list 101 deny tcp any host 192.168.253.254 eq 22
access-list 101 deny tcp any host 192.168.253.254 eq www
access-list 101 deny tcp any host 192.168.253.254 eq 443
access-list 101 deny tcp any host 192.168.253.254 eq cmd
access-list 101 deny udp any host 192.168.253.254 eq snmp
access-list 101 permit ip any any
access-list 199 permit ip any host 10.1.1.1
dialer-list 1 protocol ip permit
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server host 192.168.253.1 auth-port 1812 acct-port 1813 key 7 XXXXXXXXXXXXXXXXXX
radius-server host 192.168.253.1 auth-port 1645 acct-port 1646 key 7 XXXXXXXXXXXXXXXXXX
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
bridge 10 protocol ieee
bridge 10 route ip
banner login C Border Router
line con 0
no modem enable
transport output telnet
line aux 0
transport output telnet
line vty 0 4
access-class 100 in
privilege level 15
length 0
transport input telnet ssh
scheduler max-task-time 5000
scheduler interval 500
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
sntp server xxx.xxx.xxx.xxx
endHi Jody,
Apologies delay in replying. I have done the following:
Made two of the FE ports vlan1,BVI1 (for LAN traffic)
Left one port as VLAN10 as the pppoe client conected to the externalmodem
Made the last port VLAN10 as well and gave it an IP addess as for a DMZ client.
I have DHCP configured to serve the DMZ addresses.
This all works for LAN clients and also works for a client attachedto that physical DMZ port.
When I added a dot11radio sub interface into VLAN 10 the wireless client did not get an IP lease. Everything else continued to work.
I had never thought about this before, but if a dot11radio interface is on the same vlan (but not being part ofa bridge group) why are DHCP broadcasts not propogating to all the vlan members as I would have expected. I recognise that this isa limit in my understanding.
If I then made VLAN10 a member of a new Bridge Group, I lost WAN connectivity as per original posting.
I cannot add another VLAN due to the 2 vlan limit in this image.
Finally regarding your comment about giving it what it wants, what exactly did you have in mind. The dialer already has a dial string parameters configured.
Think I am about to give upon this.
Regards, -
I have a 3750 cluster and I want to know what are the recommended snmp traps to be sent. We definitely want to know when one of the switches in the cluster fails.
I've read about snmp-server enable traps stackwise and snmp-server enable traps cluster. What do these traps actually do?stackwise would be useful, here's a description:
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=ciscoStackWiseMIB&translate=Translate&submitValue=SUBMIT
also have a look at:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.1/13ew/command/reference/S1.html#wp1126420 -
Before I purchased the E3200 yesterday, I contacted Cisco Sales support and asked specific question about SNMP support on E3200. I was told that E3200 does supports SNMP.. However, I do not find any setup / nor any documentation on how to. Does anyone know If E3200 supports SNMP? I would like to monitor my router using SNMP traps..
Thanks in advance..Simple Network Management Protocol (SNMP) is an "Internet-standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more.” It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention. SNMP is a component of the Internet Protocol Suite as defined by the Internet Engineering Task Force (IETF). It consists of a set of standards for network management, including an application layer protocol, a database schema, and a set of data objects.
So on that basis you can refer to a link whether it works better or not...
http://silvercreek.iwl.com/home/products-and-solutions/50-tools-and-options?gclid=CImQrJXZnKoCFcl56w... -
Hello,
as mentioned in the documentation, the SF300/SG300 series switches are capable of sending SNMP-Traps.
What kind of SNMP traps are they sending? I need "Link Up / Link Down" Traps. Do the switches send such traps or is it possible to configure these switches to send them?
Thanks a lot,
MarcoHi,
Here is a link to the Data Sheet on the 300's:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps10898/data_sheet_c78-610061.html
It states that SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM)
So you should be able to configure "Link Up / Link Down" Traps. See chapter 19 Configuring SNMP:
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
Thanks,
Nick -
Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
- Servers -> IP address of CUCM
- Read Only -> unchecked
- Use as Default CUCM -> checked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
- Sametime User ID Mapping
- Use Business Card Attribute -> MailAddress
- Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
IgorHi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
- Enable Phone Status -> active
- Desk Phone Control -> active
- no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
- Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
- LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor -
Boot camp with Cisco VPN client and smart card
Looking at a Macbook or Macbook Air and the only reason I need to run windows is to be able to access my work network through the Cisco VPN client and my Smartcard then use remote desktop. From my understanding if I run Bootcamp it should work am I correct? Im going to an Apple store tomorrow hopefully they can help too.
Thanksmrbacklash wrote:
Ok with that being said will the MBA 11.6 1.4ghz have the guts to make it run mostly internet based programs over the VPN connection?
I think if you are running apps over the Internet the bottleneck will be the Internet and your VPN bandwidth. Your computer can certainly execute faster than Internet communications.
Besides, Internet or remote applications run on the remote server. All your local computer does is local processing of the data if necessary.
Message was edited by: BobTheFisherman -
Cisco VPN Client and Mac OS 10.5.1 update
After upgrading to Leopard (10.5) my Cisco VNP client stopped working. I was able to fix that by downloading the newer VPN Client 4.9.01 (0080) from the Macupdate.com website. Now that I've updated to Mac OS 10.5.1, the VPN Client won't work again!! I went back to the Macupdate website and downloaded what looks like an even newer version - 4.9.01 (0090) - but this is labeled as a BETA and it doesn't work either. Anyone out there seen a newer version, or something that works with 10.5.1?
b166er wrote:
Aside from the fact that it's marked beta, I'm wary about the source of MacUpdate's download. They link to http://www.arrange.co.at/download/vpnclient-darwin-4.9.01.0090-universal-k9-BETA .dmg
Cisco don't ever make the client freely available. The official download is via form on the Cisco web site and you need appropriate credentials. I wouldn't risk installing from any other source.
The home page at http://www.arrange.co.at/ doesn't exactly inspire confidence.
Dude has a point... it's risky to mess with something like this from an untrusted source IMHO. Cisco is picky about who they give it out to. I have to get mine through my host provider since they are the ones that are authorized.
For what it's worth, I'm using 4.9.01 with 10.5.1 and it works well. -
HOME#sho run
Building configuration...
Current configuration : 5657 bytes
! Last configuration change at 10:51:11 UTC Fri May 17 2013 by admin
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname HOME
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 $1$bgx9$VrtQW3Wg182VyYhKAHLbN.
no aaa new-model
memory-size iomem 10
crypto pki trustpoint TP-self-signed-1190003239
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1190003239
revocation-check none
rsakeypair TP-self-signed-1190003239
crypto pki certificate chain TP-self-signed-1190003239
certificate self-signed 01
3082024A 308201B3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31313930 30303332 3339301E 170D3133 30353137 31303333
35315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 31393030
30333233 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C002 80BBF151 E095E469 AA7DBB18 2A9E3CC2 4AC223F6 ABE0AF49 876C1203
65D0E246 786F174D E5B7897A 44C5755A 2571E58A 184A6C62 DD992A2A D8A24878
25A8D3C3 03F5D3C2 522EC8BB 302B0CCD 2945087A 7AF01418 D0056679 6F64DB4A
BE2D5DA1 106CD03A 83B422A2 3CCBAE88 F2413123 12269390 6949DFE0 411118E7
8F210203 010001A3 72307030 0F060355 1D130101 FF040530 030101FF 301D0603
551D1104 16301482 12484F4D 452E7777 772E7961 686F6F2E 636F6D30 1F060355
1D230418 30168014 3D2D854D 1203F50D 77F4ABC5 B61CEAF6 C922F4DF 301D0603
551D0E04 1604143D 2D854D12 03F50D77 F4ABC5B6 1CEAF6C9 22F4DF30 0D06092A
864886F7 0D010104 05000381 8100B24C 48BACACE 87ADEA03 386F2045 CC89624A
4EB1AD09 062EB2A4 CF4C96CA 0B2CF001 BD2C3804 8DC47FED 6A5B5F0D 3965AC6E
4FC4682F 707E4132 8F27C083 C7FAE1BD 21D055E6 C79D5DAD 051B6321 D35DB4F2
044E6BBD DAD08B6A 6ED87C7E 08F4F7E1 4EFDFB6F 867AF6FA 84165CFC D219D56F
A82EABD4 AD9CFA24 A5088145 E571
quit
ip source-route
ip routing protocol purge interface
ip dhcp excluded-address 10.10.10.1
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
domain-name www.google.com
dns-server 192.168.1.1
lease 0 2
ip cef
ip domain name www.yahoo.com
ip name-server 84.235.6.55
ip name-server 84.235.57.230
no ipv6 cef
multilink bundle-name authenticated
license udi pid CISCO881-SEC-K9 sn FCZ1516933C
username admin privilege 15 password 0 cisco
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
ip address dhcp
ip access-group 101 in
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip nat enable
ip virtual-reassembly
ip tcp adjust-mss 1452
interface Vlan2
no ip address
ip nat inside
ip virtual-reassembly
ip default-gateway 192.168.1.1
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 101 interface FastEthernet4 overload
ip route 0.0.0.0 0.0.0.0 FastEthernet4
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 101 permit ip any any
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
banner motd ^Cuthorized ^C
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
password cisco
logging synchronous
login local
transport input telnet ssh
scheduler max-task-time 5000
endHOME#ping 4.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.2.2.2, timeout is 2 seconds:
Success rate is 0 percent (0/5)
HOME#sh ip int br
Interface IP-Address OK? Method Status Protocol
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
FastEthernet4 192.168.1.120 YES DHCP up up
NVI0 10.10.10.1 YES unset up up
Vlan1 10.10.10.1 YES NVRAM down down
Vlan2 unassigned YES NVRAM down down
HOME#
fast ethernet is connected to my internet connection -
We are working on a capacity planning project for one of our customers and we need an estimate on the maximum number of PVCs supported in the following situations:
a)Cisco BPX 8620 and 8680 chassis with BCC-4V 128MB DRAM and 4 MB BRAM ?
b)Maximum number of PVC's supported by each of the following STM-1 cards:
- model BXM-155-4D and 4DX ?
- model BXM-155-8D and 8DX ?a)It depends upon software level. b) 16,000 per card, With release 9.3:
60K Connections Support on BXM-E—Provides the ability to support a maximum of 60K per card for VSI applications for the BPX 8600, for example, PNNI or MPLS, used on enhanced BXM-E cards. -
Problem with Cisco 861W router and outgoing VPN
We have a Cisco 861W router that is blocking an outgoing PPTP on the internal access point only. The outgoing VPN works when the traffic is through a wired connection or the connection is on another access point. We fail to make a connection only when connection to the 861W's internal Access Point.
Here is the Access Point Configuration:
Current configuration : 2100 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname obap
enable secret 5 $1$.1RF$go1D7WITXUn3s8TUaw3tC.
no aaa new-model
dot11 syslog
dot11 ssid OLIVER
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 XXXXXXXXXXX
username XXXXXX privilege 15 secret 5 $1$Wc0K$OzcQDDQfjHP6La31eXMoG/
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm tkip
ssid OLIVER
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecti
ng AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.0.2 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with priv¾ilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
end
obap#
Here is the Router's Configuration:
Current configuration : 5908 bytes
! No configuration change since last restart
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname obrouter
boot-start-marker
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 $1$i9XE$DjxFVAEC9nC4/r6EQKCd6/
no aaa new-model
memory-size iomem 10
clock timezone PCTime -5
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-1856757619
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1856757619
revocation-check none
rsakeypair TP-self-signed-1856757619
crypto pki certificate chain TP-self-signed-1856757619
certificate self-signed 01
3082024D 308201B6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383536 37353736 3139301E 170D3036 30313032 31323030
34345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38353637
35373631 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B1A4 FB786547 3D582260 03DB768D 116BDE9A 309FBA04 B53F77B0 BFE32344
7C3439B3 97192B36 760A9411 1D5C7549 8D86F532 ABA44F53 0D08B7F4 A9A747D5
071330C3 65BF25A8 927F3596 29BB5A80 90C8D169 22268476 3B8DDE1E FDB7170D
B4820D03 5580A849 A92C7E76 9AC10867 505A2FEE 64360741 7F9DBDBF 3D79982C
F81D0203 010001A3 75307330 0F060355 1D130101 FF040530 030101FF 30200603
551D1104 19301782 156F6272 6F757465 722E6272 75736868 6F672E63 6F6D301F
0603551D 23041830 168014D8 5BC2FFB2 967A4C7B 11B44122 5C8D31F7 749B9230
1D060355 1D0E0416 0414D85B C2FFB296 7A4C7B11 B441225C 8D31F774 9B92300D
06092A86 4886F70D 01010405 00038181 005901F1 C239074B B8213567 CF7B65BF
DAFE4557 69B2A3B1 5F2593C7 A54B9598 23FD5E7A 563AA6E0 AFB25801 FA0061E8
F9545372 DB600B3A BE68AE65 1EDA593E 6A0C96B8 5A4136AF 393F9AAC 651E1C36
B8B7C6C0 47936C24 D2ECE9A5 9446EE32 FC7461FA AD8CF1CE A7FBF341 07E9C3C6
505AB88D 0E7FCAFC 5792298A E5E4D1FE CC
quit
no ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp pool ccp-pool1
import all
network 192.168.0.0 255.255.255.0
dns-server 216.49.160.10 216.49.160.66
default-router 192.168.0.1
ip cef
no ip bootp server
ip domain name brushhog.com
ip name-server 216.49.160.10
ip name-server 216.49.160.66
license udi pid CISCO861W-GN-A-K9 sn FTX155281FY
username tech38 privilege 15 secret 5 $1$d/4Z$n/23EsXbzfHF5XfJ8Nv.y0
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $ES_WAN$$FW_OUTSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
duplex auto
speed auto
pppoe-client dial-pool-number 1
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXXXXXXXX
ppp chap password 7 XXXXXXXXXXXXXXXX
ppp pap sent-username XXXXXXXXXXXXXX password 7 XXXXXXXXXXX
no cdp enable
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source static tcp 192.168.0.25 80 interface Dialer0 80
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
Any help would be appreciatedHello,
i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Can someone help?
Thank you.
Here is my config for internal AP and router.
Maybe you are looking for
-
Need Help with moving to an iMac.
Hey, right now I'm writing from my old PC, I've orderd the new iMac 5K with upgrades like 16 GB ram' 3TB fusion drive and intel i7 so it means it takes more time. I've never had a Mac and I actually bearly used one, but since for the past 4.5 years I
-
Creat transaction (se93) for Globa class in ABAP Objects
Hi experts, Can any one tell me how to creat transaction (se93) for Globa class(se24) in ABAP Objects if ,please assest me how to do it or send me example docu on this best Answer will be rewarded regards fareedas
-
Elitepad 1000 G2 external monitor resolution problem
Hey guys, Recently I got this elitepad 1000 g2 window 8.1 tablet, I connected hp lv1911 monitor using docking station with it, however the highest resolution is only 1366x768 for the external monitor. I have tried to update all windows updates, an
-
Partitioning on timestamp column
Has anybody ever used a range partition on a timestamp column. For data columns my parition looks like this: PARTITION P_2011_02_15 VALUES LESS THAN (TO_DATE(' 2011-02-16 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) can somebody pr
-
Last night when prompted by software updater, I installed the new iWork updates. This morning I have come to use Pages (As I do everyday) and it refuses to open due to 'A Problem' Having checked the rest of the suite, none of iWorks now work after th