CJIF - Display Project Results Analysis Line Items

I have gone through all the threads related to CJIF. I have not got right solution.
I have business scenario in PS - Customer Projects with billing element.
1. project creation + network creation
2. project budgeting & releasing
3. Project pr-po & procurement of materials & services
4. based on Project Teco status : Sales Order raising for Materials & Services
5. PRoject - PSG settlement carried against Sales ORder number
we are not using milestone billing or billing plan & we have not configured any result anaysis version.
after the above, now when i am running CJIF for the above related projects, i am not getting any values
pl help in getting the output
Thanks in advance
Srihari

we don't have CO consultant, please help in giving tips how I can get the Output in Tcode CJIF for my projects.
I am PS consultant, I will try with your help to get the desired results. To my understand CJIF is related to Project System.
pl help
Thank you in advance
Srihari

Similar Messages

Project Actual Cost Line Items (CJI3) - Need Invement Profile Key also

Hi All,
We are trying to execute the report "Project Actual Cost Line Items" through Transaction Code CJI3.
We need Invement Profile Key also in the out report of CJI3.
Is there any Standard SAP report to get Invement Profile Key as well along with normal CJI3 output.
Please let me know in case you find any such Standard SAP report.
Thanks in advance for your help.
Regards,
Srinivas

Hello Sreekanth
Thanks for your input. Yes it is working now after posting cost under same CE as what I have maintained in Base of costing sheet on required WBS..
I was under impression that the cost lying in cost center can be pulled out indepedantly on WBS through costing sheet based upon percentage mentioned in overhead.However I am observing now that the cost posted on WBS is taken as base amount to calculate overhead.
In my case, Eur 100 cost is posted under primary cost element 652100 on WBS and Eur 2000 cost is posted on Cost center under same Cost element Actually I am required to pull out some percentage of cost Eur2000 on cost center to WBS. However,
currently it is taking Rs 100 (posted on WBS) as basline cost and calculating overhead over it and posting it to WBS again under overhead cost element.
Can we handle this through costing sheet or for that Assessment distribution is must? May I expect the answer.
Best Regards
Adwait

Subroutine program its display the text at line item as it's service order

Hi All,
Am looking for subroutine program its display the text at line item as it's service order, I want to view the text in sapscript in the tcode ME9F of the order text.
Ex:- in tcode ME23N, select PO & item details in Account Assignment tab, ORDER field is not displaying for some of the orders, but while debugging I can see the ORDER values.
Can'nt see the ORDER field in print preview, Pls let me know.
Edited by: Nagendra DS on Feb 19, 2008 3:18 AM

Hi,
If you are retrieving the values in the print program, the values will definetly get populated to the sap script. In case of subroutines in the form, the values you pass it to the structure ITCSY should be characters only.
Hope this helps.
Sudha

Display the Max of Line Items

Dear All,
I am new to BW. Please help me resolve the following issue.
To display only the maximum amount in the line item of a PO.
I created a new formula KF with the PO amount and then changed the property to "calculate result as" - "maximum".
When I run this query along with the line no. I can see in the result the maximum of all the line item as below:
Doc# -
Line#--Amount--Max
001-----129.87--
29.87
001-----212.36--
12.36
RESULT--42.23--
29.87
But, if I select the line no as free char. My output is:
Doc# -
Amount----Max
001--42.23----42.23
I need the output as :
Doc# -
Amount----Max
001--42.23--
29.87
When I checked the prev posts I came across a solution to create Calc Key figure. But, I am not authorized to create any CKF.
I will thank any answers with points.
Thanks in advace.
Rad

You will need to use CKF for this.

GL Line Item Display vs. Vendor Line Item Display

Hi Gurus,
I have parked a document with a vendor line item. When generating
standrd GL line item reports (FBL3N or S_ALR_87012282), the line items
for my parked document are not displayed. But if I generate the vendor
line item report (FBL1N), this parked document is displayed.
Please confirm if this is a standard behaviour and why.
Thanks and best regards

HI
I knew that, a complete FI document wont give such error thats why i asked for Document type ,You please note each document type has its own characteristic.
Hope your query closed
Thanks

How to display the number of line items in sap-script report?

Hi friends,
I need a help regarding the SAP Script. In my script (report) I create two pages and created three windows (MAIN, HEADER, FOOTER) for each pages. Now the problem is while displaying the fewer line item which can come under the main window of the 1st page these line items are comming perfectly but for the remaining line items that comes on the second page the table headings and the boexs are not comming.
Also it is displaying the total and the amount in text in every pages that should be display in last page.
Here if I eleminate or comments the total and the amount in text for the first page the same is reflected in second page. Also I need to display the page-nor for each pages to displayed.
I am requesting all the people out there kindly help me to solve this issues.
Thanks and Regards

There is no pre built solution for this. But we can show total pages in the report body.
one way is Create a other column in the report with code sum(count(1))/25. that gives you total number of pages. 25 here is no of rows in each page. The code you can write in narrative "Total pages in the report are @5" and out put may be "Total Pages in the report are 30".
If you are using pivot tables, you can try this.
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/
- Madan

Different figure display between Balance and Line items

How can I find out the difference between line item and Balance in FS10n?
Actually when I Executing the FS10N the balance of DR. balance is greater then that account Dr. Balance line item.
Can any one tell me why?
Thanks & Regards,
Anandakumar

Its a sundry debtors gl account. All the line item and open item transaction balance are displaying.
but the amount is not displaying (difference amount).
Any one has solution pls tell me.
Thanks in Advance,
Anandkumar

Problem with cents:"G/L Account Bal. Display (FS10N) vs. Line Item Display

Dear colleagues,
We have used BSIS table within a batch input program using standard transactions such as F-02 and OASV, in order to leave several "old" G/L accounts completely up to zero, and therefore transferring their complete amount to "new" G/L accounts.
What we see in several "old" accounts after doing the transfer is that system still displays me 1, 2 or 3 cents in transaction FS10N......but if I double click for its G/L account line item display, system correctly tells me that the old g/l account is completely balanced. Logically, for I have checked in BSIS table through program which is the necessary amount to balance the old g/l account.
So we can say there is a lack of coordination between what I see in the first screen of FS10N and the Line Item display screen of the g/l account. No doubt, old account is completely balanced and well transferred to new g/l account (checked in BSIS table), but FS10N still reports few cents.........isn´t it somehow mischievous?
Does anyone know how to clean those cents (which actually are virtual cents)? Is there any sap note reporting this bug and providing the solution?
Thank you so much for your kind attention on reading my post and best regards.
F. Albisu

Dear Neeraj,
Yes you are right, there a lots of notes related to this issue.
I have found note 595776 which I think best fit with my problem. Would you hindly read it and confirm to me, from your point of view, I am in the correct track?
(Of course, the system I am talking to you abput, proceeded to the Euro Conversion in 2002)
Thanks!

How to: Reference fields XREF1/2 to be displayed in Acc Doc Line Item

Hi Experts,
May I know how to display the fields in the Line Item Level that can also be changed.
What I already did was the configuration OB32, OB41, FI>GL>Master Data>G/L Accts>Line Items>Define Special Fields for Line Item Dsiplay.
But it still not working. What is the proper way to configure these fields?
Thanks

In the Line item Display list in FBL*N follow this menu path: Settings
-> Special fields, and add the fields you want from relevant table.
The fields are later available for display, and you can choose them from
the Line item Display list following this menu: Settings -> Display
variant -> Current. From the hidden list you can now choose the fields
you want to have shown. If the technical name is shown for the fields,
the special fields are all starting with '1-U_'. It's important, that
you add the Special field, if the field also exist as Standard field.
The Special fields are shown in the bottom of the Hidden list.
Review the solution part of note 215798 the detailed steps.
XREF1 / XREF2 do not exist in the index table (BSIS/BSAS) for the G/L
account. Therefore you should create XREF1/2 as special field for
display via FAGLL03/FBL3N.
SPRO - ... - Define Special Fields for Line Item Display
There you should also include the field and store the change.
You do not have to run the RFPOSXEXT again, because the related
structure is generated automatically within the storage of the data.
After you have stored the 'new' field, you should run the report
BALVBUFDEL. This report will reset the ALV buffer, because the old
definition of the fieldcatalog does not have the needed fields, and
so it might happen that these are not displayed in the fieldlist of
the FAGLL03.
Please refer to the attached 984305 and 215798 Point 3.
Regards,
Fernando

Project Results Analysis KKA2 Enhancement

In SPRO - Project System - Revenue & Earnings- Automatic & Periodic
Allocation - Result Analysis - Edit result analysis key & version -
Maintain Result analysis version,
If, CO Area 1000 & RA Version 0 selected, system is not allowing cross-
company valuation check box activation due to "Transfer to Financial
accounting active" check box is selected.
However if "Transfer to Financial accounting active" check box is un-
selected, system is allowing to save with option "cross-company
valuation" check box. But during KKA2, system is showing error due
to "version relevant to settlement" is selected.
Now the problem is that, if "cross-company valuation check box" is not
selected the system is not skiping steps as mentioned in screen.
Hence, enhancement KKAG0001 cannot be activated.
Kindly provide the solution.

Do you have an OSS ID? There is a document to describe the setting of RA for IAS in service.sap.com/erp, access the sub-node of management accounting -> product cost accounting -> media library.
Or access the URL
[https://websmp206.sap-ag.de/~sapidb/011000358700006305122006E.PDF]
If you don not have any OSS ID, please reply my message.
Flex Yang

MIRO: Is displaying VAT amount at line item level possible?

Hello,
Total Tax Amount is available in the header of a MIRO document, but is it possible to show the VAT Amount at line item level? i.e. as another column in the grid?
Thanks.

Hi,
You can not see VAT amount at Item level in MIRO.It will be allways at header level.
Regards,
Manish

Display conditions as billing line items

Hello,
I have a sales order with one line item. This line item is mapped to 2 conditions. Everything works fine.
When I generate a billing document, I get only 1 line item (also expected).
But I would like my billing document to show the conditions. This is because I'd like my customer to see a complete breakdown of all the prices that were used.
Is this possible in SD? If so, how? Thanks!

If I understood correctly , you have a sales order one line item with 2 conditions , the same order if you do the billing only one condition is appearing.. ?
If yes then check the pricing analasys in Billing , then check in pricing procedure if Requirement-24 has been assigned againes missing condition type.

Item catagory field display in sales order lin item

Hi experts,
I would like to have your view points to gray out item catagory field at sales order item level.
In our scenario, company has outsourced sales order creation to third party vendor. Also we have restricted sales order creation for these user's via role creation for certain document types.
Even after these settings, now they have access to item catagory field to modify. We want to gray out this field so that they will not be able to update it to another item catagoroy.
Thanks in adavance for your reply.
Regards,
Prabhaharan

I have a suggestion, which can act as a work around through configuration. Maintain only one default Item category & do not maintain any alternative item category, which can be changed manually. this will serve the purpose of not changing the Item Category & even if user tries to change, it will not accept any other item category.
Menupath: SPRO --> Sales and Distribution --> Sales --> Sales Documents --> Sales Document Item --> Assign Item Categories
Regards,
Rajesh Banka
Reward points if helpful.

FM Posting date in transaction CJIA - Project Actual Payment line items

Hi,
Can anybody help me to understand the FM Posting Date logic in PS Cash Management. Sometimes when I run CJIA report I observe a difference between Posting Date and FM Posting date and I cannot see why.
Thanks
Marc
Moderator: Dear Mark, you should open this thread under PS Forum. I have moved your thread to that forum so the PS experts will be able to help you with your inquiry. Thanks for your understanding.

Hi Kristine,
look to the following tables:
1) RPSCO : Project info database: Costs, revenues, finances
2) COSP: CO Object - Cost Totals for External Postings
regards Andreas

Offsetting Account in line item display - FBL1N or FBL3N

How can I bring in the offsetting account name into the line item reports FBL1N or FBL3N?
I have applied OSS note 112312 using the SAP function LINE_ITEMS_GET_GKONT but this only brings in the account # and account type. I would also like the account name. I'm assuming I need to somehow change structure RFPOSXEXT but don't know where to get the name field (I think it's GKONT_KTXT but not sure).
I appreciate any suggestions you might have.
Thanks
Twila

Hi
A Document is a proof of a business transaction.
A document contains Header and Line Items.
There will be minimum 2 line items and a maximum of upto 999.
Line Items display which account is debited and from which account it is credited.
while creating a G/L account , in the control data tab , there will be line item display check box. if you dont select the check box , you will not be able to see the line items ie you will not see which are debited and which are credited. you will see only the balance available in the accounts ie account balance.
you must select the line item display check box to display the line items.
selling items (materials) from sales and those line items will be displayed in G/L account or some thing else -? This is posting documents via Accounting Interface(from SD) , this results in Line Items in FI Document.
If you want to summarize FI Documents, read not 36353 and note the links to related notes.
Regards
Venkat
Edited by: Venkat Dara on Dec 17, 2008 8:01 PM

CJIF - Display Project Results Analysis Line Items

Similar Messages

Maybe you are looking for